. go to top icon

ATC SCM0.1/12SL Pro

SKU: APA2022-00169
  • free shipping icon
    Δωρεάν Μεταφορικά
  • 36  Δόσεις
  • 2 years warranty
    2 Έτη Εγγύηση
  • free shipping icon
    Δωρεάν Μεταφορικά
  • 36  Δόσεις
  • 2 years warranty
    2 Έτη Εγγύηση
4.300 
Κατόπιν Παραγγελίας
Προσθήκη στο καλάθι
apa support icon
ΕΧΕΙΣ ΑΠΟΡΙΕΣ;

Οι ειδικοί μηχανικοί μας μπορούν να σε βοηθήσουν!

guide image
ONLINE GUIDE

Διαβάστε τον οδηγό αγοράς για Ηχεία

The ATC SCM0.1/12 is a floor loaded active subwoofer using ATC’s 12-inch SL driver powered an impressive 650W amplifier. It is ideally paired with the SCM20ASL Pro. The ATC SCM0.1/12 offers extremely low 3rd harmonic distortion and an impressive 118dB spl at 28Hz. Its floor-loaded design provides a better room adaptation than front-loaded designs.

It is designed to be used as the ELF in a multi-channel setup or as bass extender in a two-channel setup.

ATC SCM0.1/12 Main Features:

  • Drivers: LF 314mm
  • Amplitude Linearity: +2dB 30Hz - 300Hz
  • Cut-off Frequencies (-6dB free standing) 20Hz
  • Max Continuous SPL @ 1 meter 118dB
  • Amplifier Output: Bass 1000 Watts RMS
  • Overload Protection Active FET Momentary Gain Reduction plus thermal tweeter protection
  • Input Impedance 10k ohms
  • Input Sensitivity 1V
  • Sensitivity Trim +6dB
  • Input Connector Male XLR
Χαρακτηριστικά
  • Drivers: 314mm (12″)
  • Cut-off Frequencies (-3dB free standing): 18Hz & 250Hz
  • Max Continuous SPL: 112dB SPL @ 1 metre
  • Input Connectors: 2 x Female XLR (pin 2 +ve)
  • Input Sensitivity: 1.16V/3.5dBu (200W out @40Hz, 70Hz LP filter, max gain, both inputs driven)
  • Input Impedance: >10k Ohms
  • Common Mode Rejection: >90dB
  • Harmonic Distortion (amplifier): <0.01%
  • Amplifier Output: 450 Watts continuous
  • Dynamic Outut: 1000 Watts peak
  • Overload Protection: Active FET momentary gain reduction
  • Gain Control Range: ±6dB
  • Contour Equaliser: 6dB lift @ 40 – 60Hz
  • Filter Characteristics: 50Hz, 70Hz, 90Hz, 120Hz, 180Hz, 2kHz L/P 2nd order critically damped.
  • Power Requirements: 100, 115, 230V (factory set for territory), 50/60Hz.
  • Cabinet Dimensions (HxWxD): 581 x 530 x 530mm (22.9″ x 20.9″ x 20.9″)
  • Overall Weight: 49.75kg / 109.45lbs
Γράψτε τη δική σας αξιολόγηση

Πως βαθμολογείτε αυτό το προϊόν;