B-STOCK

High gloss black, 2 x 200 Watt. Very accurate sounding power amplifier from German production. With WBT LS terminals. Very stable current.Manufacturer:   Symphonic LinePrice Group:   P5: more than 500 EURColour:   blackInputs:   RCA CinchTechnic:   solid stateSpeaker outputs:   1 pair

Class A και Recomended Component στο περιοδικό Stereophile, στην  ίδια  "λίγκα " με τα καλύτερα ηχεία που κατασκευάστηκαν ποτέ. Ηχείο με  δύο glass fiber γούφερς 7 ιντσών και 1 ίντσας Neodymium Ring Radiator Tweeter. " ... the best loudspeaker I ever heard ..."  σύμφωνα με τον Bob Katz διάσημο mastering engineer Ένα ηχείο που πρέπει να ακούσει κάποιος για να καταλάβει πόσο κοντά στην αληθινή μουσική μπορεί να φτάσει η ακρόαση  ενός συστήματος ηχείων.             ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ : Ενα 1" (25mm) Neodymium Ring Radiator tweeter Δύο 7" (18cm) Glass Fiber Mid-Woofers σε MTM διάταξη Απόκριση συχνοτήτων : 56Hz-20kHz ±1dB (31Hz-40kHz ±3dB) SPL: 90 dB 1W/1m Αντίσταση: 4 Ohms Διαστάσεις: 23.6" H x 9.4" W x 12.4" D (60cm x 24cm x 32.5cm) Βάρος: 41 lbs (18.5 kg)               ΦΙΛΟΣΟΦΙΑ ΚΑΤΑΣΚΕΥΗΣ: 1. A sealed enclosure tuned for the best impulse response rather than a low-end extension. We strongly believe that various kinds of vented enclosures always cause coloration that does not deliver reference accuracy. 2. Sturdy enclosure made of 1" (25mm) thick MDF with internal bracing to bring unwanted resonance and box coloration to an almost nonexistent level. 3. Stiff Glass Fiber Cone mid-woofers with low dampening rubber surround, diecast chassis, and a low distortion magnet. 4. Neodymium Ring Radiator - super low distortion tweeters with frequency response up to 40kHz and extra wide dispersion. 5. The absence of a grill in front of the tweeter. Our laboratory and listening tests prove that even the most transparent grill fabric causes high frequency comb filtering. 6. An acoustic, rather than an electronic, time-coherence of tweeters. 7. Unique tweeter surrounding. Perfecting the tweeter environment appeared quite possibly to be the most challenging aspect of the design. The goal was to eliminate the edging effect by carefully shaping the tweeter surrounding with specially designed Belgian foam. 8. A low-order crossover for the best phase response. We also selected the lowest possible crossover point to deliver the best transient response. 9. Premium quality crossover parts. Foil Inductors wound on a wooden core - with their skin effect conductivity - provide performance unmatched by less expensive wire wound coils, and provide much lower coloration than iron core inductors. We also use non-inductive resistors, premium audiophile grade capacitors and special flat, Super OFC internal wires. 10. Matching internal dampening design. Internal dampening is outsourced and precut to absolutely identical shape and weight for the best speaker-to-speaker consistency. 11. Dual, all-brass, gold-plated posts, which accept banana plugs or up to 2 AWG wires. 12. Magnetic Shielding. All our speakers are magnetically shielded for demanding pro video applications. 13. All parameters perfected in anechoic chamber.

Introducing the Voyager BT 15 MKII, the second generation of Voyager BT speakers. This versatile and powerful wireless active speaker delivers an exceptional audio experience for all your festive occasions.With a sensitivity of 99 dB and a power output of 450 W, this speaker provides remarkable sound performance. It is perfect for use with your computer, home theater system, karaoke setup, smartphone, portable audio player, as well as for energizing parties at clubs, bars, concerts, or shopping malls.One of the standout features of the Voyager BT 15 MKII is its True Wireless System (TWS) technology, allowing you to connect two speakers or audio devices to create a wireless stereo system. Immerse yourself in powerful and immersive sound that surrounds you from all sides, transforming your space into a true concert hall.The 25mm tweeter and 380mm woofer deliver exceptional clarity and deep bass that bring your favorite music to life. Enjoy an electrifying ambiance at every moment.The Voyager BT 15 MKII is equipped with a built-in 12V/7Ah battery, providing up to 6 hours of battery life for extended listening. The power supply is also included (110-230V/50Hz), ensuring convenient and flexible use.This speaker offers various convenient features, including connectivity options such as USB, TransFlash card, Bluetooth, and FM radio. The color LEDs and Echo effect add an extra touch of ambiance to create a festive atmosphere.The Mic, AUX, and Guitar inputs provide versatile connectivity for use with different instruments and microphones. Express your musical creativity and enjoy a complete audio experience.The Voyager BT 15 MKII comes with two microphones and a remote control, giving you full control over your audio experience. Its portable design features a transport handle and integrated wheels, making it easy to move wherever you go.Immerse yourself in the festive atmosphere with the portable, wireless, and TWS functionality of the Voyager BT 15 MKII. Explore the power of the Voyager BT MKII range with its little sister, the Voyager BT 12 MKII, and its big sister, the Voyager BT 15 PRO MKII, and let the music take you to new audio dimensions.

Ο θρυλικός ήχος. Το WA-251 σχεδιάστηκε και δημιουργήθηκε στα πρότυπα των κλασικών vintage μικροφώνων...  Για υψηλής ποιότητας ηχογραφήσεις, σε προσιτή τιμή.        Το κλασικό '251 έγινε εξαιρετικά δημοφιλές τη δεκαετία του 1960 και θεωρείται σήμερα ένα από τα καλύτερα πυκνωτικά μικρόφωνα που δημιουργήθηκαν ποτέ.   Το κλασικό '251 εξακολουθεί να χρησιμοποιείται ευρέως σήμερα σε επαγγελματικά στούντιο ,αλλά έχει γίνει εξαιρετικά σπάνιο και απαγορευτικό για την απόκτηση του λόγο του υψηλού του κόστους.   Ο σχεδιασμός του WA-251 για να ακούγεται σαν το κλασικό '251 δεν ήταν εύκολη υπόθεση,  κυρίως επειδή κάποιο από τα vintage εξαρτήματα δεν κατασκευάζονται πλέον ή δεν είναι διαθέσιμα.   Παρ' όλα αυτά δημιουργήσαμε το WA-251 ώστε να μπορούν να το αποκτήσουν περισσότεροι άνθρωποι από ποτέ !    Τεχνικά Χαρακτηριστικά:   Custom WA-12-B-60V διπλού πηνίου, Vintage CK12-Style Capsule All-Brass Μετασχηματιστής εξόδου CINEMAG USA JJ SLOVAK 12AY7 TUBE VACUUM GOTHAM 5 GAC-7, καλώδιο 7 ακίδων Πολικά διαγράμματα: 3 - Καρδιοειδές, Οmni , Figure of eight Συχνοτικό εύρως: 20 HZ ~ 20 KHz Αντίσταση εξόδου: 200 OHMS Μax SPL: 132DB (

Μικρό αλλά απίστευτα δυνατό το Sopra No1 περιλαμβάνει μια σειρά από τεχνολογικές καινοτομίες που το κάνουν να ξεχωρίζει.Η κατασκευή του περιλαμβάνει “NIC” μαγνητικό πεδίο, “TDM” σχεδίαση γύρω απο το midrange-woofer και IHL ( infinite horn loading) για το tweeter με πολύ χαμηλές παραμορφώσεις στην κρίσημη περιοχή 1500-4000 kHz.Οι πολύ χαμηλές παραμορφώσεις δίνουν απίστευτη ακρίβεια, καθαρότητα και διαφάνεια στον ήχο σε συνδιασμό με μια τεράστια στερεοφωνική εικόνα.

Σε άριστη κατάσταση με προσφάτως αλλαγμένα tweeter, είναι μια ευκαιρία να μπεί κάποιος στον χώρο της πολύ υψηλής πιστότητας !Όπως ολόκληρη η σειρά ηχείων Electra Be, το high end ηχείο δαπέδου 1037 Be επωφελείται από τις καινούριες μονάδες και τις νέες ρυθμίσεις που αυτές φέρνουν. Η τρομερή δύναμη των τριών 7" (18cm) γούφερ, προστίθεται στα νέα επίπεδα καθαρότητας της αναπαραγωγής και ρεαλισμού της στερεοφωνικής εικόνας.  

Brand NEW Backplates V5 (2024) Whether you're recording, mixing, or mastering, the Solo6 Be is just the kind of no-nonsense, cutting-edge reference monitor you're going to want in your studio. True, the Solo6 Be has an amazing bass response for its size (down to 40Hz), not to mention an impressive upper-frequency response that reaches beyond human hearing to 40kHz — but this monitor's still much more than just its numbers. It's full. It's clear. It's articulate. And, just like its 3-way big brother, the Twin6 Be, the Solo6 Be is all about ensuring your tracks translate

The DS-10 EVO is a versatile and innovative streaming DAC, equipped with a state-of-the-art D/A converter, a line preamplifier and a headphone amplifier. In addition to its numerous connectivity options, it also features high-definition Bluetooth and a professional headphone output. The DS-10 EVO supports high-resolution files, such as MQA and DSD (up to DSD512), to provide an unparalleled digital music listening experience. The DS-10 EVO’s technology is housed in a compact aluminium chassis, making this unit the perfect addition to any modern High-End audio system.With the DS-10 EVO, you can stream music via Roon, Airplay, Tidal, MQA, Qobuz, Spotify, vTuner and Deezer, access a collection of digital music stored locally on a NAS or USB flash drive, or from a smartphone or tablet, via the GN Control app (available for free on iOS and Android) and directly from the Tidal application thanks to the implementation of Tidal Connect. Furthermore, the DS-10 EVO is Roon Ready and compatible with all UPnP/DLNA and Airplay 2.0 services. It can be connected to the network using Wi-Fi or Ethernet port and, at the same time, to a power amplifier or active speakers to explore the limitless possibilities of high-resolution music.The DS-10 EVO features a unique function that sets it apart from any other DAC, making it extremely flexible: it is possible to modify the DAC profile to adapt it to the music being played, without degrading the audio signal and maintaining the highest quality, by acting on the de-emphasis parameters, on the low-pass digital filters and the DSD filter. These parameters can be adjusted in real-time during playback, quickly and intuitively thanks to the dedicated menu and the TFT display.On the 2.8″ TFT display, it is possible to quickly view all the available functions and manage them via the SKC (Single Knob Control) knob located on the front panel, the Gold Note remote control or the dedicated GN Control App.
GN Control shows on a smartphone or tablet all the information regarding the track being played, such as the format and resolution, while the user experience is super intuitive thanks to a cutting-edge interface and the possibility of performing firmware updates directly from the internet.
Roon Ready devices have integrated Roon streaming technology and are certified by Roon Labs to provide the highest level of quality and performance in high-resolution streaming.PSU-10 EVO was developed with the best components for high-quality audio applications, specifically selected to boost the performance of all DS-10 models (DS-10/DS-10 PLUS, DS-10 EVO/DS-10 EVO LINE). PSU-10 EVO is equipped with a 4-transformer power supply stage enhanced with low-noise voltage regulators. The power supply uses a 4-transformer model, 3 of which are entirely dedicated to the power supply and 1 to the inductive filter. Dual Choke Hybrid technology features an inductive filter on the analogue stage and is powered by a dual inductor driving both the negative and positive high-current stages. By perfectly filtering the current, it eliminates interference and noise from the AC power supply, thus ensuring perfect isolation and creating the ideal environment for the electronics to perform at their best.

Also in the Venere 1.5 bookshelf speaker we have considered the cornerstones of the history of Sonus faber, where tradition and innovation combine in a cabinet design inspired by the lyre shape of Aida and a dedicated stand.Technical specificationsSYSTEM 2 way standmount bookshelf vented boxLOUDSPEAKERS Tw: High definition precoated fabric dome driver with no ferrofluid, Ø 29 mm Md: Free compression basket design and Curv cone, 1 x Ø 150 mmCROSSOVER 2.000HzFREQUENCY RESPONSE 50Hz-25.000 HzSENSITIVITY 85 dB SPL (2.83V/1M)NOMINAL IMPEDANCE 6 ohmSUGGESTED AMPLIFIER POWER OUTPUT 30W – 150W without clippingDIMENSIONS (HXWXD) 1055 x 370 x 472 mm 41,5 x 14,5 x 18,5 in394 x 206 x 300 mm 15,5 x 8 x 11,8 in 682 x 276 x 382 mm (optional dedicated stand) 26,8 x 10,8 x 15 in (optional dedicated stand)WEIGHT 6,5 Kg ea – net weight 14,3 lb ea – net weight 11,5 Kg ea - dedicated stand incl. (optional) 25,3 lb ea - dedicated stand incl. (optional)AVAILABLE FINISHES Black, Wood

The Multy Award winning Icon Signature Hi-Fi Range are a direct result of our working relationship between Custom Design and our customers, please read High End Racks on the review pages.The Hardwood supports are manufactured from licenced professionally managed forests. Thanks to techniques of sustained yield forest management more hardwoods have been grown in the past30 years than have been harvested. Finishes include Natural, Oak, Cherry, Mahogany, Walnut and Black, with complimenting top and base steel crossbars available in Mercury or Black. To veiw ourfull range of finishes please visit our Colour Swatch Page.A resolute search for the ideal Hi-Fi support system, providing sound quality, flexibility and aesthetic appeal has resulted in the Icon Signature 750 Hi-Fi Range. A finished height of 775mm, includingbase spikes, with 4 ( 2 adjustable ), toughened glass shelves 560mm (W) x 370mm (D) available in Clear or Black finish provides just that. Additional shelving available £49.99 Extra.Standard Dimensions - 775mm (H) x 660mm (W) x 430mm (D)Shelf Spacing - 2 Glass shelves adjustable - usable space 640mmGlass Shelf Size - 560mm (W) x 370mm (D) x 6mm.Additional shelf £49.99 Extra.From the 1st May 2016 Standard Finishes included: White, Natural, Oak, Cherry, Mahongany and Black. For Walnut there will be an additional premiumImage above: Icon Signature 750 Hi-Fi - Oak with Black Crossbars and Black Glass.Image above: Icon Signature 750 Hi-Fi - Oak with Black Crossbars and Clear Glass.

The DALI ALTECO C-1 is truly a multipurpose speaker in both design and function. DALI wanted to ensure that the ALTECO C-1 is usable as both a height speaker as well as a traditional stereo speaker. By designing the crossover for stereo use and by keeping a strict focus on DALI sound design principles, we have created a speaker that fulfills both criteria. It is the perfect fit for adding height information to a surround setup or taking the role as an out-of-the-way stereo speaker.The ALTECO C-1 delivers believable height information from Atmos, DTS-X and Auro-3D movies in surround setup - not only when “firing up” using the ceiling as a reflector, but also “firing down” from a position up under the ceiling.The ALTECO C-1 is able to achieve this even without special equalizing in order to enhance the effects from HRTF (Head Related Transfer Function) technology. A technology found in Atmos certified speakers.Instead the ALTECO C-1 relies only on the height processing done in the amplifier, when selected. Had we included non-linear HRTF equalizing in the ALTECO C1, it would have been impossible to use it as a versatile neutral speaker, limiting the use to only an up-firing type speaker.Designed the way it is the DALI ALTECO C-1 offers the best from several worlds giving you ultimate flexibility and multiple applications. DUAL SOUND MODEThe unique angular design combined with the dual sound mode enables this speaker to be used in a multitude of different scenarios. Choose 'UP' on the front baffle switch to beam the sound waves either straight out for a soft downwards angle, or by selecting 'DOWN', beaming the sound almost straight down for close position listening.UP-FIRINGThe angular design of this speaker makes it perfect for up-firing use. Combined with a surround receiver that has the ability to render height information (Dolby Atmos, DTS-X or Auro-3D), placing it on top of the front speakers, and even on top of the rear speakers will offer an excellent ceiling reflected rendering of height information in compatible movies and concerts.WOOD FIBRE CONESOur low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.SOFT DOME TWEETERThe dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2). Specifications :Product seriesALTECOFrequency Range (+/-3 dB) [Hz]74 - 25,000 HzSensitivity (2,83 V/1 m) [dB]83.0 dBNominal Impedance [ohms]6 ohmsMaximum SPL [dB]103 dBRecommended Amplifier Power [W]40 - 100 WattCrossover Frequency [Hz]2,100 HzCrossover Principle2-wayHigh frequency driver, Quantity1 x 21 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4.5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire (Spring loaded push button) Recommended PlacementOn-Wall On speaker Recommended Distance From Wall [cm]    1 - 100 cmDimensions (HxWxD) [mm]265 x 160 x 200Weight [kg]2.9 kgAccessories IncludedRubber Feet Manual 

Το DB3D προσφέρει εκπληκτική απόδοση από ένα συμπαγές υπογούφερ. Οι διπλοί ισορροπημένοι οδηγοί Aerofoil των 8 ιντσών τροφοδοτούνται αβίαστα από έναν ενισχυτή Class Watt 1000 Watt, ο οποίος παρέχει εντυπωσιακά, βαθιά μπάσα.Technical features:1000w Class D Hypex amplifier2 x 200mm (8in) Aerofoil™ cone drive units in a balanced configurationDigital preamplifier with Dynamic EQApp-based set-up and BT-LE controlDrive units: 2 x 200mm (8in) Aerofoil™ cone drive units in a balanced configurationFrequency range (-6dB): 8.5Hz - 500HzFrequency response -3dB (centered on level at 100Hz): 10Hz - 350 HzMax power output: 1000WInputs:2 x XLR2 x RCA2 x 3.5mm 12V triggerRS-232 - 9-pin D connectorDimensions:Height: 360mm (14.1in)Width: 320mm (12.6in)Depth: 300mm (11.8in)Net weight : 25kg

Το WA-8000 είναι μια λεπτομερής επανέκδοση σε ένα πολύ ειδικό λαμπάτο μικρόφωνο που άνοιξε το δρόμο του σε αμέτρητες πλατινένιες ηχογραφήσεις, ξεκινώντας από τις αρχές της δεκαετίας του '90 και συνεχίζοντας έως σήμερα. Ο ήχος αυτού του μικροφώνου έχει προσφέρει επιτυχίες για καλλιτέχνες από τον Dr. Dre, τη Mariah Carey, τον Boyz II Men και τον Brian McKnight μέχρι τον Eminem, τη Rihanna, τον Drake και άλλους. Το πρωτότυπο ξεχώριζε, διαθέτοντας φυσικά και ανοιχτά πρίμα, εξαιρετικά καθαρά μεσαία και ικανότητα απόδοσης εξαιρετικής λεπτομέρειας στα φωνητικά, σε αντίθεση με τα περισσότερα μικρόφωνα στον πλανήτη. Το WA-8000 ανταποκρίνεται στο ύψος των περιστάσεων και προσφέρει όλο αυτό το κορυφαίο συχνοτικό εύρος σε μια τιμή που θα σας κάνει να χαμογελάσετε.

The Elex MK4 is a high performance stereo integrated amplifier designed to deliver the purest musical performance. Housed in a brand new case to match the rest of the Rega range, the MK4 builds on previous Rega designs using our multi-award winning class A/B power amplifier circuit which delivers an impressive 72W per channel into 8Ω loads (90W into 6Ω). New rear connectivity options are available with the Elex MK4 now including a Rega DAC circuit with two digital inputs and a high quality headphone output conveniently located on the front panel.KEY FEATURES72 W per channel into 8 Ω / 90 W into 6 ΩHigh quality moving magnet phono stageHigh performance Rega DAC circuit for digital inputs2 x Digital inputs – 1 x optical and 1 x Co-AxialHeadphone output4 Line level inputsNew custom design caseThermal Cut-Out

Major performance upgrades and now with added love for vinyl. In the six years since the last NAIT integrated amplifiers were released, our research and development team have worked on a range of amplifier improvements. The result is upgraded power amplifier sections for SUPERNAIT 3, delivering greater pace and intimacy to their musical delivery – whether it's driving a pair of loudspeakers or your favourite pair of headphones. SUPERNAIT 3 has received significant performance upgrades, including a built-in phono stage, making it a perfect partner for turntables, as well as for streamers, CD players, or any other music source people want to enjoy with the signature Naim sound. It also includes a Class A preamp output stage which doubles as a headphone amplifier and ceramic heatsink technology that minimises capacitive coupling between the chassis and output transistors for optimum sound quality. Its inputs are each individually decoupled and hand-wired to minimise noise and interference while internal switching employs ultra-low-noise, constant current sources which are derived directly from the electronic design of the flagship NAC 552 preamplifier. The SUPERNAIT 3 can be upgraded with our external power supplies, power amplifiers and even cabling upgrades to get the best from all sources.  With our typical obsessive attention to detail – all in service of achieving the most authentic musical performance – the SUPERNAIT 3 benefits from the following features: Class A headphone amplification Alps Blue Velvet volume control Reed relay input selection Ceramic insulators for the power transistors Galvanically isolated microprocessor control section Microphonic-isolating PCB mounts Step up from the NAIT XS3 to the SUPERNAIT 3 and you benefit from a range of superior features, all designed to deliver even better sound quality: Full 24V DR module built-in: enjoy the purer power and performance improvement of Naim’s Discrete Regulation technology for the entire pre-amp stage. Larger toroidal transformer in the power supply: provides greater power and speed of recovery Additional leaded through-hole components in the signal path: further minimises negative effects of vibration and transient thermal conditions Chassis-mounted input sockets hand-wired to the circuit boards: offers enhanced vibration isolation Full Alps Blue Velvet balance control Our R&D team has found a way to more than double the speed of the voltage gain stage, which in turn doubles the rate at which the speaker output stage can react. The second gain stage transistors have been optimised, so they no longer need to be shielded by a cascode stage transistor. Removing the cascode means less amplifier stabilisation is required: that doubles the slew rate and delivers an uplift in sound quality. The phono circuit topology comprises 3 stages: the gain stage, passive equalisation and final gain and active equalisation. This enables excellent noise performance, extended RIAA equalisation beyond the audio band and great overload headroom. All RIAA equalisation capacitors and the RIAA resistors are ‘through-hole’ mounted film designs, with low microphonic pickup and excellent transient performance. As phono stages are 1000x more sensitive than other inputs, this greatly benefits the sound quality. Input impedance is 47kΩ in parallel with 470pF capacitive loading;  the gain is perfect for 5mV moving magnet cartridges. Audio Inputs: MM Phono Input: via RCA, 47k parallel 470pF input impedance, suitable for 5mV cartridges Line Level Inputs: 130mV sensitivity, 47k input impedance, suitable for 2V Power Amp In: DIN Socket Audio Outputs: Powered Accessory Sockets: +24V for Naim phono amplifier Speaker Outputs: 80W per channel into 8 ohms (4mm sockets), 130W per channel into 4 ohms Line Outputs Variable (level): Pre-amp (DIN), Bi-amp (DIN), Sub (RCA pair) 775mV,

The design of the HDA range draws upon all of Arcam’s experience as one of the UK’s most respected audio companies, to produce Arcam’s best performing range of audio products yet – using the best quality components and engineering practices, the HDA range is designed and built to give you years of listening enjoyment.SA10In any amplifier, the signal path is at the mercy of anything that creates noise within the unit. Thus, we spare no expense in using only the most high-quality components, even if it means the cost of our power supplies overtaking that of everything else.The result, of course, is worth every penny.A singer’s sharp intake of breath before hitting the chorus, a guitarist’s fingers sliding against the strings – it’s those seemingly minor details that can bring music to life. Fish out one of your all-time favourite albums and play it through a Bluetooth speaker, and guess what? Its sounds like a Bluetooth speaker. Play it through the SA10, and it’s as close to hearing the artist’s performance as you’re likely to get. There’s always joy in digging out an old recording you haven’t heard in years. With the HDA range, it’ll feel like hearing it forthe first time. Features:Extremely efficient class A/B amplification50W of power per channel5 analogue inputs including phono3 digital inputs32-bit DAC,Sabre ESS9016K2MFull I/P controlTotal harmonic distortion + noise = 0.003%

Integrated Amplifier with DAC, DSD, Phono, Airplay, Bluetooth and LAN !M-One is not only an integrated amplifier, but a window into a unique musical experience …No single audio product before the M-One delivers such a feature-packed and modern product that fits into such a small and elegant space – crafted from a single block of Aluminum.Essentially, it's an integrated amplifier, but with every connection you could want. Against all the odds, our engineers have managed to incorporate all the latest connections – Bluetooth aptX, LAN-Network 24bit /384kHz Asynchronous, SPDIF Coax-Opto-AES 24bit / 768kHz USB asynchronous passing DXD, DSD, DOP…, Phono MM / MC, Analog balanced and unbalanced inputs, and DSP with automatic room correction. Analog Balanced and Unbalanced Inputs, are just some of the inclusions.It is often the most demanding constraints that inspire engineers and designers to strive for creative and innovative solutions. Our tailor made M-One integrated amplifiers are a perfect example (M.C.F.) !Good Things Come in Small PackagesGet iOS App >Get Android App >Common audio wisdom dictates that high fidelity is best achieved with separate components, discreet circuitry, and space-consuming electronics and cables. However, this conventional wisdom is not without exception. Seeming contradictions exist where products have been able to produce the same phenomenal sound in a much smaller electronic package.This appears to be the logic behind the brand Micromega, whose paradoxical name has been associated with high-quality audio in unique packages since 1987. The company’s new M-One range of integrated amplifiers lives up to this legacy, offering a sleek and compact visual with a shocking array of connectivity options. It should go without saying that sound quality is at the forefront of the design. The device includes a DAC that is compatible with all high-resolution audio formats, a phono stage for turntables with both moving-magnet and moving-coil cartridges, power amplifier for loudspeakers, and many other options.The rear panel of the device has 26 connections, what one would expect from a mainstream A/V receiver rather than an audiophile integrated amplifier. Micromega touts that the device is encased in a cabinet milled from a single block of aluminum, and it comes in a variety of colors to suit the listener’s preferences. The M-One is sure to satisfy even the pickiest room designer or audiophile.It’s an absolute engineering miracle!Since your listening room is the weakest link in your installation, our engineers designed the M.A.R.S system to address this issue.This acoustic correction system and its Room EQ program detect the sound irregularities of your room and attenuate them for a balanced and accurate response. Over time, the dedicated application will provide this scalable system with a variety of additional features* MARS is included with M-150, in option with M-100* Premium Gloss finishes available for an additional $1000.00AMPLIFIER - classe AB* DAC PCM 32/768 et DSD256* DLNA* Ethernet* Bluetooth SBC - apt-X* S/PDIF - I2S* USB asynchronous* Calibration microphone M.A.R.S (optional)* Phono : MM / MC* 1.4 Vrms (RCA) - 1.7 Vrms (XLR)* 1x USB type B* 2x USB type A (service)* 2x HDMI I2S* 1x S/PDIF optique Toslink* 1x S/PDIF coaxiale RCA* 1x trigger* 1x INPUT XLR* 1x INPUT RCA* 1x phono MM/MC* 1x microphone* 1x pre-out XLR* 1x RCA* 1X SUB OUT* POWER : 2x100 W (8 Ohms) et 2x200 W (4 Ohms)* Rapport signal /bruit : 100 dB (RCA), 103 dB (XLR) et > 75 dB (phono)* SEPARATION: 96 dB @ 1 kHz et 80 dB @ 10 kHz430 x 56 x 350 mm10.7 kg         

The XPS is a simple and effective upgrade to enhance the music-making ability of your Naim Audio source component. As one of our most flexible performers it can be used to upgrade our CDX2 CD player and DAC digital to analogue converter, and it is also suitable for use with our NDS, NDX and ND5 XS network players and HDX hard-disk player/server. Its large toroidal transformer features four separate windings, coupled to six low-noise regulators and benefits from Naim Audio DR voltage regulator technology Features: Four isolated transformer windings with six low-noise DR power regulators - configured as two isolated regulators for digital at +15V, isolated +/-10V for DACs and isolated +/-23V for analogue stages All-new Discrete Regulator (DR) configuration, delivering Naim Audio’s best-ever standards of stable, low-noise power Brushed, black-anodised aluminium chassis plus anti-vibration feet Technology & Craft The Naim Audio XPS is a highly sophisticated power supply with six separately regulated, very low noise outputs, featuring a toroidal transformer and six power regulators. These supplies are branched and re-regulated, some twice in the CD player. The addition of anti-vibration, resonance-controlling feet complement the elegant cast and extruded anti-magnetic chassis protect the sensitive internal components from resonance and microphonic vibration. The XPS was updated in 2012 as a result of a two year project to develop a new discrete regulator (DR) for Naim Audio power supplies. The new Naim Audio DR now features, alongside improvements to the mechanical decoupling and internal layout. These enhancements, developed through intensive listening tests, significantly raise performance and make music even more communicative and enjoyable. Please note  Only new classic series XPS units are compatible with the NDX network player, not ‘Olive’ versions. The old ‘Olive’ XPS is still compatible with CDX and CDS model CD players, the HDX hard disk player and the DAC digital to analogue converter however. Please consult your Naim Audio retailer if you are unsure of compatibility. Finish: Case: Black powder coated Front: Brushed and black anodised Outputs: Power Outputs: ± 22V, ± 10V, 2 x 15V Physical: Shipping Weight: 15.1 kg Shipping Dimensions: 240 x 590 x 500mm Weight: 12.4 kg Dimensions (HxWxD): 87 x 432 x 314mm Power: Mains Supply: 100V, 115V, 230V; 50 or 60Hz Supplied with: Supplied with: Burndy Upgrades: Other: Power-Line Lite mains cable (UK denominations only)

The SCA2 is ATC’s highest performance preamplifier and has been in continuous production since 1996, testament to its exceptional performance and timeless styling.  It is the ideal partner to ATC’s high-end active loudspeakers and also power amplifiers, such as the ATC P2.  Balanced and unbalanced inputs and outputs provide flexible connectivity to a very wide range of partnering equipment. The optional phono stage is fully configurable for both gain, resistive and capacitive loading and its low-noise design makes it well suited to even the lowest output moving coil cartridges. Features:Discrete class-A low-noise circuitry throughout. High-current output stages ensure exceptionally low distortion into any load & when driving long cables. 500kHz bandwidth eliminates phase shift and contributes to the outstanding reproduction of fine musical detail.  Optional SPH2 MC/MM RIAA precision phono stage with extensive gain/loading options. 2 x stereo balanced XLR line inputs & 6 x stereo RCA/Phono line inputs. 1 x stereo balanced XLR & 1 x stereo single-ended RCA/Phono preamp output. Billet Aluminium IR Remote Control. Hand built in the UK & covered by a 6-year warranty. 

To Focal Aria 936 είναι ένα ηχείο δαπέδου τριών δρόμων που συνδυάζει κομψό σχεδιασμό και μεγάλο ήχο. Η καλή τονική ισορροπία και οι εντυπωσιακές δυναμικές, χάρη στα 3 woofers που διαθέτει, προορίζονται για την ακρόαση στερεοφωνικής μουσικής αλλά και για ένα reference σύστημα Home Cinema.Κατάλληλο για δωμάτια μετρώντας από 270ft2 (25m2) και από απόσταση ακρόασης των 10-12ft (3m - 3.5m). ΧαρακτηριστικάΗχεία δαπέδου 3 δρόμωνIσχύς: 300 WAντίσταση: 8ΩEυαισθησία: 92 dBAπόκριση συχνότητας: 39Hz - 28kHzΔιαστάσεις (Π x Y x B): 294 x 1150 x 371 mmΕγγύηση αντιπροσωπείας : 2 χρόνια