Δημοφιλή Προϊόντα
Όλα τα προϊόντα Manley
The Manley Silver Tube Microphone is large condenser microphone inspired by the legendary Sony C-37A and built in collaboration with Josephson.The Manley Silver Tube Microphone uses a capsule designed by David Josephson who has provided a stunning recreation of the C-3 capsule originally used on the C-37 microphone in the ‘50s. This capsule is single-ended and boasts an adjustable acoustic chamber on the back allowing the user to change between omni and cardioid polar patterns. This capsule delivers a rich a creamy tone associated with the original Sony microphone.Inside the microphone, lies a unique circuit design which combines a FET and vacuum tube cathode used to amplify the signal before hitting Manley’s IRON transformer. This design provides a bit less output than other microphones and can, therefore, accommodate loud sources very well.The power supply has been specifically designed for audio fidelity with all regulated lines, super low impedance rails and no 50Hz/60Hz ripple component present in the chassis. It works at any voltages between 90V and 250V so all you need to do is plug it in.This microphone offers a rich and warm sound that will complement female vocals and saxophones particularly well without any boxiness or sibilance. It will also impart its sonic glory on drum overheard with a warm mid frequency response shaving off the harshness produced by cymbals when used with other microphones. Its dark tone means that it can often be used instead of a ribbon microphone. Manley Silver Tube Microphone Main Features:Condenser Transducer based on vintage Sony C-37A Hand Made in USA by Josephson AudioSingle-Sided Large Diaphragm Capsule Edge Tensioned5 Micron Evaporated Gold Diaphragm 1" diameterDual Pattern Cardioid or Omni Directional adjustable via vent on the backplate5670 Internal Vacuum Tube Head AmplifierConstant Current Source for Tube Minimizes Noise and Tube SelectionHand Wound Nickel Core Manley Iron Output TransformerOutput Impedance: 30 OhmsHigh Pass Filter Switch -3dB @ 55Hz 6dB/8vaFREQUENCY RESPONSE: 10Hz-30kHz, AMP to 60kHzMAXIMUM INPUT SPL: 150 dB SPL at CapsuleSENSITIVITY: 7mV/PaAMPLIFIER TYPE: 2 Triode Gain Block Lo Z OutputOUTPUT POLARITY: Balanced XLR, Pin 2 Hot, Pin 3 LowAMPLIFIER DISTORTION: Less Than 0.05 % THD+N BW 22-22 kHz (1kOhm Load, 1kHz -40dBV Output)AMPLIFIER NOISE: Typically -108 dBV “A Weighted”BODY: Etched Silver Anodized AluminumWeight: 1.5 lbs (mic)Weight: 2 lbs (PSU)Size: 2" x 9.7" x 4.5" (mic including suspension)Size: 5" x 8.2" x 3.4" (PSU)Custom Designed Outboard Switched Mode PSU 90V ~ 250VAC Universal Voltage Operation 50Hz-60HzPower Consumption: 15 WattsPSU External Mains Fuse: 5mm X 20mm, 2A @ 250V, CERAMIC, Slo-Blo
The MANLEY GOLD REFERENCE MULTI-PATTERN MICROPHONE are a statement, quite simply, of the finest microphones that money can buy in the pursuit of truly accurate musical recordings. The Gold Reference Series employ our own design of large capsules (1.25 inch overall, 1 inch diaphragm diameter) which are executed to precise tolerances made possible by modern micro-milling machinery available today in California. The capsule rings and back-plates are milled from solid brass. The gold diaphragm film comes from Germany and is tensioned using proprietary techniques by David Josephson ensuring capsule-to-capsule constancy, combined with the speed, "air", and superb ultra-high frequency response you have only dreamt about. The all-tube electronics in the MANLEY REFERENCE SERIES MICROPHONES are built around two triodes in cascade forming an entire gain-block. We have recently switched to a dual-triode 12AT7 tube, easily obtainable and replaceable, mounted in a ceramic socket. (We originally used 6072A until it became impossible to find quiet ones out of the NOS dreck left on the market, then we used 12AX7 for awhile.) The output is coupled through a MANLEY output transformer of unparalleled quality and substantial physical size employing nickel laminations with "hum bucking" bi-filar windings, encased in mu-metal. The polar pattern control is continuously variable between the OMNI, CARDIOID, and FIGURE 8 positions vastly increasing this mic’s versatility. The Gold Mics make it possible to exactly tailor the proximity effect to achieve the desired character. We have chosen a very open weave stainless-steel grille for the capsule window which allows all the highs to reach the capsule unimpaired letting the engineer choose if, when, and how much pop screen is appropriate. As a result, the Reference Gold reaches to the furthest extremes of highs and lows with gorgeous natural acoustic smoothness. Some engineers tell us it sometimes "hears" more than they do! A locking 6-pin XLR connector for the 30 foot power supply cable carries the stringently filtered B+ and regulated heater voltages from the separate dedicated power supply. The audio signal exits the PSU via a traditional 3-pin XLR jack. The microphone body is machined from brass providing excellent shielding properties, polished to a high lustre, then plated with 24 karat gold for an impressive finish, inspiring confidence in artists and producers. Our proprietary precision suspension system is provided with each REFERENCE MICROPHONE (the capsule itself is mounted onto a neoprene-rubber shock-mount.) Because the entire working "guts" of the microphone may be removed for service in one piece from the housing, it is envisioned that the microphone need not be removed from the suspension. We also provide a very useful swivel of our own design with every REFERENCE MICROPHONE; its T-bar handle and locking clutch action require no tools to adjust. And no MANLEY microphone would be complete without a genuine leather capsule protector which slips (and ties) onto the end of the microphone to protect the capsule when not in use. Specifications: All Tube design using 12AT7 dual triode. (Previous versions used 6072 or 12AX7.) -10dB switchable PAD Sensitivity: 17mV/Pa Noise: typically -120 dB EIN Max SPL: 150dB Actual output impedance 200 Ohms Weight: 2.25 lbs (mic) Weight: 2.5 lbs (PSU) Size: 4.5" x 9.7" x 4.5" (mic) Size: 5" x 8.2" x 3.4" (PSU) Shipping weight: 15 lbs Selected matched pairs available Outboard Power Supply is factory set for 100V, 120V or 220-240VAC operation for original destination country's mains voltage. Operating Mains Voltage changeable with power transformer re-wiring via internal jumpers and fuse value change. Mains Voltage Frequency: 50~ 60Hz Mains Fuse: 250mA @ 100~120V; 125mA @ 220~240V operation Power Consumption: 70mA @ 120V = 8.4 Watts
Το Καρδιοειδές Μικρόφωνο Αναφοράς της Manley έχει τα ίδια χαρακτηρηστικά όπως τα περίφημα μικρόφωνα Gold Reference , αλλά με μία μόνο καρδιοειδή κάψα.O εξαιρετικός του ήχος, η πλούσια τονική ισορροπία και ο "υγρός" χαρακτήρας, αναδεικνύουν όργανα όπως κιθάρες, drum overheads, σαξόφωνο, και ιδιαίτερα φωνές και φωνητικά.Χαρακτηριστικά:All-Tube triode design 12AT7 (2011 build. Previous versions used 12AX7 and 6072.)-10 dB switchable padFrequency response: 10Hz-30KHzSensitivity: 17mV/PaNoise typically -120dB EINMax SPL: 150dBActual output impedance 200 OhmsWeight: 2.25 lbs (mic)Weight: 2.5 lbs (PSU)Size: 4.5" x 9.7" x 4.5" (mic)Size: 5" x 8.2" x 3.4" (PSU)Shipping weight: 15 lbsSelected matched pairs availableOutboard Power Supply is factory set for 100V, 120V or 220-240VAC operation for original destination country's mains voltage.Operating Mains Voltage changeable with power transformer re-wiring via internal jumpers and fuse value change.Mains Voltage Frequency: 50~ 60HzMains Fuse: 250mA @ 100~120V; 125mA @ 220~240V operationPower Consumption: 70mA @ 120V = 8.4 Watts