RCF

ART 735-A MK5 is a unique product in its category. The 3,0" compression driver offers unique vocal clarity and sound projection. The 15” woofer offers an extremely linear response and a precise, deep low frequency control. The transducers are produced using the most advanced assembly technologies. The amplifier delivers 1400 watts and is controlled by a DSP that takes care of crossover, equalisation, phase control, soft limiting and speaker protections.Features132 dB Max SPL1400 WATT 2-way peak power90° x 60°, Wide dispersion constant directivity hornInnovative DSP Processing3,0" Titanium diaphragm Compression Driver15" WooferFiRPHASE TechnologyXBOOST Low Frequencies EnhancerPowerful Class D AmplifiersRCF's Class-D power amplifier technology packs huge performance operating with high efficiency into a lightweight solution. ART 7 amplifiers deliver ultra-fast attack, realistic transient response and impressive audio performance. The amplifier features a solid mechanical aluminium structure which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. All the ART 7 amplifiers present SMPS power supply section in order to produce maximum output and minimum transportation weight.Legendary TransducersSuperior Compression DriversThe ND840 Compression Driver in pure Titanium with a 3” voice coil allows a crossover point at only 800 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.Potent WooferThe low-frequency transducer is a high-power 15’’ woofer with a 3" voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.

Το Rcf ART 715-A MK5 το Best Seller της RCF ανεβαίνει επίπεδο με την 5η γενιά της σειράς 7. Είναι εξαιρετικής ποιότητας ηχείο, κατάλληλο για κάθε εφαρμογή. Μοναδικό στην κατηγορία του. Το Driver με ειδικά σχεδιασμένο θόλο και πηνίο υψηλής ισχύος προσφέρει μοναδική καθαρότητα και απόλυτη κάλυψη . Το 15’’ Woofer προσφέρει φοβερά γραμμική απόκριση και ακριβή χειρισμό στις χαμηλές συχνότητες σε όλο το φάσμα. Ο ενισχυτής είναι 1400Watt και ελέγχεται από DSP που διαχειρίζεται το Crossing το Equalizer τον έλεγχο φάσης αλλά μεταξύ άλλων και Soft Limiting για την προστασία του μεγαφώνου. 

300 W RMS power handling126 dB max SPL70 ÷ 20000 Hz frequency range120° x 60° constant directivity coverage angle120°x 60° CMD (Constant Matching Design) constant directivity hornRotatable Horn System for horizontal cabinet mounting applicationsHF driver AMCDP (Active Mosfet Compression Driver Protection)LICC (Low Impedance Compensated Crossover) network8 Suspension pointsOmnimount™ 75 Plate fixing positions on rear of cabinet

Compact PA SpeakerMultipurpose two-way full-range speaker system, suitable for a wide range of applications. Its balanced sound is a big asset in near-field applications for the best intelligibility. The M 08 features high sensitivity, typical of professional audio cabinets thanks to the use of oversized magnets and a HI-FI sound quality, with smooth and wide frequency response, thanks to the wave-guided compression driver. The SPL level of low-distortion audio the M 08 can provide goes far beyond expectations of such a compact solution. The elegant and compact design with accurate finishing makes M 08 suitable for almost any environment, even with architectural constraints. Optional mounting accessories allow using M 08 on wall or ceiling installations.180W AES power handling124 dB max SPL60 ÷ 20000 Hz frequency range90° x 70° constant directivity coverage angle1 x 8" high power woofer1 x 1.4" voice coil compression driverHigh quality plywood cabinetSteel front grille with clothingInstallation points available on rear, top and bottom panels4 pole EUROBLOCK connector (audio input and parallel link output)FREQUENCY RESPONSE (-10DB): 60 Hz ÷ 20000 HzMAX SPL @ 1M: 124 dBHORIZONTAL COVERAGE ANGLE: 90°VERTICAL COVERAGE ANGLE: 70°DIRECTIVITY INDEX Q: 9SYSTEM SENSITIVITY: 95 dBNOMINAL IMPEDANCE (OHM): 8 ohmPOWER HANDLING: 200 W RMSPEAK POWER HANDLING: 800 W PEAKRECOMMENDED AMPLIFIER: 400 WPROTECTIONS: Dynamic active mosfetCROSSOVER FREQUENCIES: 1800 HzCOMPRESSION DRIVER: 1 x 1.0'', 1.4'' v.cNOMINAL IMPEDANCE (OHM): 8 ohmINPUT POWER RATING: 25 W AES, 50 W PEAKSENSITIVITY (DB, 1W @ 1M): 107 dB, 1W @ 1mWOOFER: 8'', 1.7'' v.cNOMINAL IMPEDANCE (OHM): 8 ohmINPUT POWER RATING: 200 W AES, 400 W PEAKSENSITIVITY (DB, 1W @ 1M): 94 dB, 1W @ 1mINPUT CONNECTORS: EuroblockOUTPUT CONNECTORS: EuroblockCOLOR: BlackHARDWARE: 6 x M6, 4 x M8, 2 x M10GRILLE: Steel with clothingCABINET/CASE MATERIAL: PlywoodWIDTH: 257 mm / 10.12 inchesDEPTH: 284 mm / 11.18 inchesHEIGHT: 442 mm / 17.4 inchesWEIGHT: 13.5 kg / 29.76 lbsPACKAGE WEIGHT: 16 kg / 35.27 lbsPACKAGE DEPTH: 295 mm / 11.61 inchesPACKAGE WIDTH: 322 mm / 12.68 inchesPACKAGE HEIGHT: 477 mm / 18.78 inches

Yψηλής ποιότητας κάλυμμα για ART 912 και ART 932 με εξωτερικό ύφασμα από πολυεστέρα ανθεκτικό στις καιρικές συνθήκες, επένδυση από foam και ανοίγματα με φερμουάρ και με ταινία Velcro. Η πρόσοψη και το πίσω πάνελ ανοίγουν προκειμένου το ηχείο να λειτουργεί με το κάλυμμα φορεμένο .

Padded Cover for ART 9 Series 15" models. It features heavy-duty weatherproof polyester outer fabric, foam rubber padding, and zip openings with Velcro fasteners. The frontal cover can be opened and blocked with velcro on one side. It features multiple openings for handles, for the rear connection panel, and the pole mount cap. Outer fabric: 600D polyester on PVC baseInternal fabric: 190 T taffeta fabric on PVC basePadding: 10 mm foam rubberClosure / opening: Zip + VelcroEmbroidered grey logo

Protection cover for EVOX 12 Subwoofer + speaker.

DescriptionART 945-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of neodymium transducers - 4" titanium compression driver, 15" woofer - two-channel 2100W amplifier, and the constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 135 dB SPL, distortion-free sound. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing, perfectly tuned for each model, the audience will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available.Power that movesThe most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.M-Brace: a new cabinet designA professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure, for greater resistance to mechanical stress.Bass Motion ControlWhen searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.New paradigms in electroacousticsThe advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image. Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.Legendary transducersSuperior compression driversThe ND940 Compression Driver in pure Titanium with a 4 inches voice coil allows a crossover point at only 650 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.Potent wooferThe low-frequency transducer is a high-power 15’’ neodymium woofer with a 3.5’’ voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.Ready for heavy-duty applicationsThe highly innovative entertainment industry is permanently evolving accompanied by increasing demands on interconnection systems. Particular environmentally sealed connectors are highly requested for heavy-duty and harsh environment applications of entertainment equipment. ART 945-A features True Outdoor Protection (TOP) PowerCON TRUE1 power input connectors. These ruggedized sealed connectors feature not only IP protection but also UV resistance approved according to UL50E.New perspective on linearityRCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

DescriptionART 935-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 3" titanium/neodymium compression driver, 15" woofer, two-channel 2100W amplifier, and the constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 133 dB SPL, distortion-free sound. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing, perfectly tuned for each model, the audience will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available.Power that movesThe most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.M-Brace: a new cabinet designA professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure, for greater resistance to mechanical stress.Bass Motion ControlWhen searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.New paradigms in electroacousticsThe advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image. Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.Legendary transducersSuperior compression driversThe ND840 Compression Driver in pure Titanium with a 3” voice coil allows a crossover point at only 800 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.Potent wooferThe low-frequency transducer is a high-power 15’’ woofer with a 3" voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.New perspective on linearityRCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

DescriptionART 915-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 1.75" compression driver, 15" woofer, two-channel 2100W amplifier, and a constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 131 dB SPL, distortion-free sound. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing, perfectly tuned for each model, the audience will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available.Power that movesThe most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.M-Brace: a new cabinet designA professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure, for greater resistance to mechanical stress.Bass Motion ControlWhen searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.New paradigms in electroacousticsThe advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image. Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.Superior transducersLightweight and powerful, RCF drivers are a true reference for high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components.High frequenciesThe new 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity, enhancing transient response and improving coupling with the low-frequency transducer.Low frequenciesLow-frequency transducer design gains more stability over higher currents, with less distortion, and is highly efficient in terms of heat dissipation. RCF quality control is very strict. Our woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels. Only the best woofer design can fit ART 9.New perspective on linearityRCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

DescriptionART 910-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 1.75" compression driver, 10" woofer, two-channel 2100W amplifier, and the constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 130 dB SPL, distortion-free sound. Merging RCF proprietary FiRPHASE and Bass Motion Control (BMC) DSP processing, perfectly tuned for each model, audiences will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available.Power that movesThe most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss.ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels.All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.M-Brace: A new cabinet designA professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure, for greater resistance to mechanical stress.Bass Motion ControlWhen searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.New paradigms in electroacousticsThe advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image. Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.Superior transducersLightweight and powerful, RCF drivers are a true reference for high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components.High frequenciesThe new 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity, enhancing transient response and improving coupling with the low-frequency transducer.Low frequenciesLow-frequency transducer design gains more stability over higher currents, with less distortion, and is highly efficient in terms of heat dissipation. RCF quality control is very strict. Our woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels. Only the best woofer design can fit ART 9.New perspective on linearityRCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

DescriptionART 932-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 3" titanium/neodymium compression driver, 12" woofer - two-channel 2100W amplifier, and the constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 132 dB SPL, distortion-free sound. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing, perfectly tuned for each model, the audience will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available. Power that movesThe most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.M-Brace: a new cabinet designA professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure, for greater resistance to mechanical stress.Bass Motion ControlWhen searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.New paradigms in electroacoustisThe advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image. Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.Legendary transducersSuperior compression driversThe ND840 Compression Driver in pure Titanium with a 3” voice coil allows a crossover point at only 800 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.Potent wooferThe low-frequency transducer is a high-power 12" woofer with a 2.5’’ voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.New perspective on linearityRCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

DescriptionART 912-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 1.75" compression driver, 12" woofer, two-channel 2100W amplifier, and the constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 130 dB SPL, distortion-free sound. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing, perfectly tuned for each model, the audience will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available. Power that movesThe most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.M-Brace: a new cabinet designA professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure, for greater resistance to mechanical stress.Bass Motion ControlWhen searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.New paradigms in electroacoustisThe advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image. Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.Superior transducersLightweight and powerful, RCF drivers are a true reference for high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components.High frequenciesThe new 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity, enhancing transient response and improving coupling with the low-frequency transducer.Low frequenciesLow-frequency transducer design gains more stability over higher currents, with less distortion, and is highly efficient in terms of heat dissipation. RCF quality control is very strict. Our woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels. Only the best woofer design can fit ART 9.New perspective on linearityRCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

DM 41 is a compact two way speaker designed for constant voltage systems. The speaker provide natural, smooth sound reproduction ideal for use in business music systems and indoor/outdoor background music applications.Connections to the loudspeaker line are made by using the two wire cable coming out from the loudspeaker rear side. The enclosure includes a protective perforated grille and an accessory for the wall mounting.Χαρακτηριστικά:3,5" woofer with mylar cone 1'' tweeter Music power/RMS: 30 W/ 15 W Built-in multitap transformer for constant voltage system Body in self-extinguishing composite material IP55 protection, suitable for outdoor use Adjustable mounting accessory included Each model can be connected to either a 100 V constant voltage line or a low impedance amplifier output 

Compact design and a wealth of mounting options make the RCF Monitor 33T a Compact 2-way loudspeakers ideal for use in business music systems. The woofer is a high-excursion, carbon fiber design. The mylar dome tweeter is mounted on a contant directivity horn to provide natural, smooth sound reproduction and high resistance to weather.Installation of the Monitor 33T is fast and efficient using the accompanying adjustable mounting bracket. Four M6 threaded inserts add to the speaker's flexibility. Connections are made to recessed color-coded, spring-loaded terminals. Wattage taps, voltage adjustments, and 4-ohm operation are selectable by means of two detented rotary switches. The enclosure is constructed of high density, scratch resistant polystyrene and includes a protective perforated steel grille and connection cover.Χαρακτηριστικά:Ideal for high quality paging and music reproduction Low impedance (4Ω - 40W) or 100V operating mode Woofer with carbon fiber cone 0.5\" tweeter in Mylar on constant directivity horn Built-in low inductance passive crossover, bass reflex @150Hz Orientable mounting accessory included Body in self-extinguishing composite material, UV resistant 

Careful acoustic design and the use of advanced materials contribute to the exceptional music fidelity and speech intelligibility exhibited by the RCF Monitor 44T (black) and Monitor 44/WT (white) two-way speaker systems. The carbon fiber diaphragm remains extremely rigid at high power levels, producing a more linear response and lower distortion. The cone is fitted with a durable foam surround and treated to resist moisture. The high-frequency section features a constant directivity horn with a built-in mechanical phase equalizer. The horn is driven by a Ferrofluid® cooled, 0.5\" mylar dome tweeter. The system is nominally crossed over at 4 kHz by a 12 dB/octave network, which uses markedly lower (than conventional) inductance values in series with the woofer. This design reduces sound delays associated with high inductance values and provides excellent low fre-quency transient response. The high-pass section is corrected for optimum perfor-mance of the CD horn and is protected with a circuit based on a low-value/low-mass filament resistor that smoothly limits the power sent to the tweeter driver. All components are housed in a vented enclosure formed from semiexpanded polystyrene foam that is extremely strong, lightweight and weather resis-tant. Threaded metal sockets are molded into the cabinet to facilitate quick, safe deployment of the Monitor 44T, as a single unit or in arrays, using specially designed accessory mounting hardware. Χαρακτηριστικά:Ideal for high quality paging and music reproductionLow impedance (4Ω - 60W) or 100V operating modeTransducers LF 5\" - HF 0.5\" constant directivity tweeterBuilt-in low inductance passive crossover with high frequency dynamic protection, bass refl ex @65HzBody in self-extinguishing plasticIncludes hinged support for installationPosite material, UV resistant

Careful acoustic design and the use of advanced materials contribute to the exceptional music fidelity and speech intelligibility exhibited by the RCF Monitor 55 (black)and Monitor 55W (white)twoway speaker systems. The shielded low-frequency driver's carbon fiber diaphragm produces a linear response and low distortion. The high-frequency section features a     110 ºx 110 ºconstant directivity horn with a builtin mechanical phase equalizer. The horn is driven by a Ferrofluid ® cooled,0.75" soft dome tweeter.Χαρακτηριστικά:Ideal for high quality paging and music reproductionTransducers LF 5" - HF 0.75" constant directivity tweeterBuilt-in low inductance passive crossover with high frequency dynamic protectionBass reflex tuned at 65HzBody in self-extinguishing plasticIncludes hinged support for installation

The MQ60H is a wall mount monitor speaker designed to guarantee uniform coverage of a large area in order to limit the number of speakers and therefore the installation points. It is a two-way speaker with three transducers: the 5“ woofer and the two horn-loaded dome tweeters with constant directivity are positioned in such a way as to ensure the maximum listening comfort within the area covered. Installation is carried out in two phases: first, you mount the support on the wall and make the electrical connections; when all the works are completed, you insert the speaker and make a quick connection.Χαρακτηριστικά:Two way Bass reflex speaker for music reproduction Speaker composed by 5" woofer 5" and 2 x 1" dome tweeter Max output power 120 W Bypass configuration input 16 Ω, output power 60 W RMS 30W - 20W - 10W - 5W output power for 100 V line 15W - 10W - 5W - 2,5W output power for 70 V line 2600 Hz crossover frequencies with attenuation 12/12 dB/oct Dynamic Protection on woofer and tweeter 

Careful acoustic design and the use of advanced materials contribute to the exceptional music fidelity and speech intelligibility exhibited by the RCF Monitor 55 (black)and Monitor 55W (white)twoway speaker systems. The shielded low-frequency driver's carbon fiber diaphragm produces a linear response and low distortion. The high-frequency section features a     110 ºx 110 ºconstant directivity horn with a builtin mechanical phase equalizer. The horn is driven by a Ferrofluid ® cooled,0.75" soft dome tweeter.Χαρακτηριστικά:Ideal for high quality paging and music reproductionTransducers LF 5" - HF 0.75" constant directivity tweeterBuilt-in low inductance passive crossover with high frequency dynamic protectionBass reflex tuned at 65HzBody in self-extinguishing plasticIncludes hinged support for installation

High intelligibility, high efficiency and compact design make the RCF MQ80P 2-way horn-loaded sound projector speaker system the ideal solution to get clear voice and music reproduction in mid-size environment. Suitable for PA systems and background/foreground music systems. Thanks to its 90° X 60°constant directivity and to simple accessories it can be combined in clusters of 2 or more pieces to get wide and smooth coverage and to reduce the installation points. It is suitable for both indoor and outdoor installations (IP 55). The woofer is a high-excursion, PP coated paper cone – rubber surround design mounted in a tuned enclosure (port can be sealed for full outdoor installation). The tweeter is a horn-loaded compression driver with phase plug, the only way to get real and crispy intelligible voice reproduction even in wide and noisy environments. Installation of the MQ80P is quick thanks to the unique bracket with several fixing points and aiming facilities.Connections are made by a multi-pole cable. Wattage taps and voltage adjustments together with 8-ohm operation are selectable by means of a Rotary switch, accessible under a sealed cover. The enclosure is constructed of high density UV resistant self-extinguishing polystyrene with robust steel grill.Χαρακτηριστικά:Speaker: woofer 5" horn-loaded, 1" horn-loaded compression driver with phase-plug loaded on CD hornPower/RMS: 120/60 W BypassImpedance: [Bypass] 8 Ω[70,7V]: 15W - 10W - 5W - 2,5WTuning frequency: 100 HzCrossover frequency: 3000 Hz Crossover: Notch/6 dB/octCabinet: self-extinguishing high-density polystyrene, UV stabilizedIP 55, suitable for outdoor useSuitable for cluster installation (2x, 3x) for a wide and uniform coverage

High intelligibility, high efficiency and compact design make the RCF MQ80P 2-way horn-loaded sound projector speaker system the ideal solution to get clear voice and music reproduction in mid-size environment. Suitable for PA systems and background/foreground music systems. Thanks to its 90° X 60°constant directivity and to simple accessories it can be combined in clusters of 2 or more pieces to get wide and smooth coverage and to reduce the installation points. It is suitable for both indoor and outdoor installations (IP 55). The woofer is a high-excursion, PP coated paper cone – rubber surround design mounted in a tuned enclosure (port can be sealed for full outdoor installation). The tweeter is a horn-loaded compression driver with phase plug, the only way to get real and crispy intelligible voice reproduction even in wide and noisy environments. Installation of the MQ80P is quick thanks to the unique bracket with several fixing points and aiming facilities.Connections are made by a multi-pole cable. Wattage taps and voltage adjustments together with 8-ohm operation are selectable by means of a Rotary switch, accessible under a sealed cover. The enclosure is constructed of high density UV resistant self-extinguishing polystyrene with robust steel grill.Χαρακτηριστικά:Speaker: woofer 5" horn-loaded, 1" horn-loaded compression driver with phase-plug loaded on CD hornPower/RMS: 120/60 W BypassImpedance: [Bypass] 8 Ω[70,7V]: 15W - 10W - 5W - 2,5WTuning frequency: 100 HzCrossover frequency: 3000 Hz Crossover: Notch/6 dB/octCabinet: self-extinguishing high-density polystyrene, UV stabilizedIP 55, suitable for outdoor useSuitable for cluster installation (2x, 3x) for a wide and uniform coverage

he HD 12-A offers an extremely linear response and a precise, deep low frequency control. The 12” woofer guarantee a superior sound projection indoor and outdoor. It is the ideal speaker for main front of house in small PA systems, for high power monitoring and it is the best solution where higher power is required for various applications in larger venues.Προδιαγραφές:1200 WATT PEAK, 600 WATT RMSDigital Bi-ampDSP Sound ProcessingRCF Precision Transducers130 dB MAX SPLΧαρακτηριστικά:Frequency Response -3 dB: 45 Hz ÷ 20000 HzMax SPL: 130 dBHorizontal coverage angle: 90°Vertical coverage angle: 60°Compression Driver: 1", 1.7" voice coilWoofer: 12", 2.5" voice coilTotal power: 1200 W PEAK

The NX 15-SMA is equipped with new high power 700 W digital amplifier and a newly designed 15” coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system.The NX 15-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes:- Floor, for stage monitoring; Free Field, for the use of the speakers as a stand-alone PA system.Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road.An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker.Προδιαγραφές:1400 Watt Peak, 700 Watt RMS digital bi-amplification130 dB max spl60° x 60° constant directivity horn15" High power neodymium woofer, 2.5" voice coil1.7" kapton dome, 1" exit, neodymium high frequency driverDSP processing, floor - fre field equalization, soft limiter and protectionCombo xlr/jack input, xlr signal outputΧαρακτηριστικά:Frequency Response 50Hz ÷ 20000 HzMax Spl: 130 DbHorizontal Coverage Angle: 60°Vertical Coverage Angle: 60°  

Housing a 12” woofer, the SUB 702-AS II, is a very compact active sub enclosure and features a 1400 W powerful digital amplifier. It is the ideal complement to 8” or 10” speakers, creating small but powerful satellite systems with outstanding performance. Thanks to its compact size it can easily be carried and is very quick and easy to start using the built-in digital stereo crossover (DSP) with adjustable crossover frequency to connect the satellite.RCF subwoofers are the first choice of many sound engineers, thanks to the very high SPL levels at very low frequencies, smaller dimensions compared to the competitors, self-powered design, and impressive size/weight to SPL output ratio. Your crowd will be able to live an engaging immersive musical experience.The RCF cabinets are made of birch plywood coated with a textured black finish. The subs are stackable and light-weight, for easy set-up and tear down, thanks to the ergonomic handles. A pole receptacle allows the use of the box in various configurations. The powder coated front grille integrates a special transparent-to-sound foam backing on the inside to further protect the transducers from dust.Προδιαγραφές:1400 Watt Digital Amplifier12" Woofer, bass reflex housingStereo crossoverSwitchable crossover frequenciesPhase-reverse switchElectronic equalization, soft limiter and protectionStereo XLR input, Stereo XLR signal outputΧαρακτηριστικά:Frequency Response 40Hz ÷ 120 HzMax Spl: 129 DbHi Pass Freq: 110 Hz 

The RCF J8 features a line source satellite module with eight 2” full-range drivers paired with a high-powered 12” woofer in a bass reflex enclosure. All powered by on-board 1400 W Class D amplification. The EVOX J Series maintains a similar footprint to the original EVOX systems, now in a portable composite enclosure. The system offers stunning sound performance with crystal-clear vocal reproduction and unparalleled musical response.RCF's Class-D power amplifier technology packs huge performance operating with high efficiency into a lightweight solution. D-Line amplifiers deliver ultra-fast attack, realistic transient response and impressive audio performance. The amplifier features a solid mechanical aluminium structure which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. The EVOX J amplifiers present SMPS power supply section in order to produce maximum output and minimum transportation weight.Προδιαγραφές:128 dB Max SPL1400 Watt 2-way peak powerDSP Processing with FiRPHASE12\" woofer, high power 2.5\" voice coil8 x 2\" ultra compact fullrange 1.0\" voice coil2350x350x450 mm 92.5x13.77x17.71 in (HxWxD)23,8/52.5 kg/lbsΧαρακτηριστικά:Frequency Response 40Hz ÷ 20000 HzMax Spl: 128 DbHorizontal Coverage Angle: 120°Vertical Coverage Angle: 30° 

Taking the EVOX J Series one step further, RCF has added an 8-input Digital Mixer to the system. The onboard processing power of the innovative Z.CORE DSP provides not only full mix functions; it includes high-quality instrument FX and AMP simulations. An EVOX iOS/Android-compatible app allows to manage the JMIX8. Adding Bluetooth audio and Hi-Z instrument input,the EVOX JMIX8 combines the quality and reliability of RCF transducers and amplification with a powerful remote controllable 8-channel digital mixer.All the available functions on the EVOX JMIX8 system integrated mixer can be managed from the operating panel. The select buttons: Input, Output, Home, System, MFX, FX give access to all the parameter pages on the LCD display. RCF's Class-D power amplifier technology packs huge performance operating with high efficiency into a lightweight solution. D-Line amplifiers deliver ultra-fast attack, realistic transient response and impressive audio performance. The amplifier features a solid mechanical aluminium structure which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. The EVOX J amplifiers present SMPS power supply section in order to produce maximum output and minimum transportation weight.Προδιαγραφές:128 dB Max SPL1400 Watt 2-way peak power8 IN Digital Mixer with multiple FX, Amp Simulator and Remote ControlDSP Processing with FiRPHASE12\" woofer, high power 2.5\" voice coil8 x 2\" ultra compact fullrange 1.0\" voice coil2350x350x450 mm 92.5x13.77x17.71 in (HxWxD)24,4/53.8 kg/lbsΧαρακτηριστικά:Frequency Response 40Hz ÷ 20000 HzMax Spl: 128 DbHorizontal Coverage Angle: 120°Vertical Coverage Angle: 30° 

The SUB 705-AS II is a compact and powerful bass reflex subwoofer. It is equipped with a 15” high power woofer with 3” voice coil, powered by a 1400 Watt digital amplifier in a robust plywood housing with deep and punchy tuning for a powerful bass. Thanks to the built-in digital stereo crossover (DSP) with adjustable crossover frequency, it can be easily and quickly set up with a satellite speaker. The SUB 705-AS II easily combines with 12” and 15”, ideal for RCF ART and D-Line Series.RCF subwoofers are the first choice of many sound engineers, thanks to the very high SPL levels at very low frequencies, smaller dimensions compared to the competitors, self-powered design, and impressive size/weight to SPL output ratio. Your crowd will be able to live an engaging immersive musical experience. The RCF cabinets are made of birch plywood coated with a textured black finish. The subs are stackable and light-weight, for easy set-up and tear down, thanks to the ergonomic handles. A pole receptacle allows the use of the box in various configurations. The powder coated front grille integrates a special transparent-to-sound foam backing on the inside to further protect the transducers from dust.RCF's Class-D power amplifier technology packs huge performance operating with high efficiency into a lightweight solution. RCF amplifiers deliver an ultra-fast attack, realistic transient response, and impressive audio performance. The amplifier features a solid machined aluminium structure which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. All the amplifiers present SMPS power supply section to produce maximum output and minimum weight.Προδιαγραφές:1400 Watt Digital Amplifier15" Woofer, bass reflex housingStereo crossoverSwitchable crossover frequenciesPhase-reverse switchElectronic equalization, soft limiter and protectionStereo XLR input, Stereo XLR signal outputΧαρακτηριστικά:Frequency Response 40Hz ÷ 120 HzMax Spl: 131 DbHi Pass Freq: 110 Hz 

Thanks to the powerful 18” woofer, with 3.0” voice coil, and the 1400-Watt amplifier, the SUB 708-AS II is the perfect tool to increase the low end performance of a portable PA system, both in terms of output and frequency extension. Thanks to the built-in digital stereo crossover (DSP) with adjustable crossover frequency it can be easily and quickly set up as a satellite speaker system. The SUB 708-AS II perfectly match 12” or 15” satellite speakers. The SUB 708-AS II is the ideal companion subwoofer the RCF ART 3, ART 7 or D-Line Series.RCF subwoofers are the first choice of many sound engineers, thanks to the very high SPL levels at very low frequencies, smaller dimensions compared to the competitors, self-powered design, and impressive size/weight to SPL output ratio. Your crowd will be able to live an engaging immersive musical experience. The RCF cabinets are made of birch plywood coated with a textured black finish. The subs are stackable and light-weight, for easy set-up and tear down, thanks to the ergonomic handles. A pole receptacle allows the use of the box in various configurations. The powder coated front grille integrates a special transparent-to-sound foam backing on the inside to further protect the transducers from dust.RCF's Class-D power amplifier technology packs huge performance operating with high efficiency into a lightweight solution. RCF amplifiers deliver an ultra-fast attack, realistic transient response, and impressive audio performance. The amplifier features a solid machined aluminium structure which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. All the amplifiers present SMPS power supply section to produce maximum output and minimum weight.Προδιαγραφές: 1400 Watt Digital Amplifier 18" Woofer, bass reflex housing Stereo crossover Switchable crossover frequencies Phase-reverse switch Electronic equalization, soft limiter and protection Stereo XLR input, Stereo XLR signal outputΧαρακτηριστικά:Frequency Response 35 Hz ÷ 120 HzMax Spl: 133 DbHi Pass Freq: 110 Hz 

The SUB 905-AS II active subwoofer is ideal for building powerful subwoofer satellite systems where compactness and high sound levels are required at the same time. The SUB 905-AS has the most advanced RCF woofer technology, coupled with a powerful 2200 W digital amplifier. It offers the perfect blend of bass reproduction, high SPL and compact dimensions for mobile use by bands or DJs. RCF's Class-D power amplifier technology packs huge performance operating with high efficiency into a lightweight solution. RCF amplifiers deliver an ultra-fast attack, realistic transient response, and impressive audio performance. The amplifier features a solid machined aluminium structure which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. All the amplifiers present SMPS power supply section to produce maximum output and minimum weight.RCF specialises in developing advanced transducer technology including the application of high-tech materials such as Neodymium, Carbon Fiber, Pure Titanium, Kevlar, Kapton and Mylar hybrids.With over 60 years of design and manufacturing experience in the market, RCF has been instrumental in technological inventions such as carbon fiber cone molding, double silicon spiders, inside/outside voice coil windings to edge wound voice coil manufacturing and pure titanium diaphragm forming. Our latest developments have resulted in designing state of the art neodymium magnetic circuits, radically new voice coil ventilation systems and ground breaking direct drive voice coil assemblies. RCF subwoofers are the first choice of many sound engineers, thanks to the very high SPL levels at very low frequencies, small dimensions compared to the competitors, self- powered design, internal delay control, cardioid configuration options and impressive size/weight to SPL output ratio. Your crowd will be able to live an engaging immersive experience. The RCF cabinets are made of the best multi-ply hardwood coated with a textured black finish. The subs are stackable and light-weight, for easy set-up and tear down, thanks to the ergonomic handles. A pole receptacle on top and side allows the use of the box in various configurations. The powder coated front grille integrates a special transparent-to-sound foam backing on the inside to further protect the transducers from dust.Προδιαγραφές: 2200 W 133 dB max SPL 40 Hz - 120 Hz frequency response 15" Woofer, 3.0" v.c. Selectable gain, X-over and delay Birch tour grade cabinet Stereo XLR input, Stereo XLR signal outputΧαρακτηριστικά:Frequency Response 40 Hz ÷ 120 HzMax Spl: 133 DbHi Pass Freq: Selectable 

The SUB 8004-AS is one of the most powerful 18” subwoofers in pro-sound category. Featuring a high power, hypervented 18” woofer, with 4” inside/outside voice coils, this cabinet is designed to deliver a serious amount of low frequency. Powered by a 1250W digital amplifier module, the SUB 8004-AS can perform in the most demanding situations. The input board includes volume control, deep/punch switch, high pass switch, phase switch, cardioid, time delay.. RCF's Class-D power amplifier technology packs huge performance operating with high efficiency into a lightweight solution. RCF amplifiers deliver an ultra-fast attack, realistic transient response, and impressive audio performance. The amplifier features a solid machined aluminium structure which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. All the amplifiers present SMPS power supply section to produce maximum output and minimum weight. RCF specialises in developing advanced transducer technology including the application of high-tech materials such as Neodymium, Carbon Fiber, Pure Titanium, Kevlar, Kapton and Mylar hybrids. With over 60 years of design and manufacturing experience in the market, RCF has been instrumental in technological inventions such as carbon fiber cone molding, double silicon spiders, inside/outside voice coil windings to edge wound voice coil manufacturing and pure titanium diaphragm forming. Our latest developments have resulted in designing state of the art neodymium magnetic circuits, radically new voice coil ventilation systems and ground breaking direct drive voice coil assemblies.Χαρακτηριστικά:2500 Watt Peak, 1250 Watt RMS 136 dB max SPL 30 Hz - 120 Hz frequency response 18\" Woofer, 4.0\" voice coil vented woofer DSP controlled Input section with selectable presets Delay control Baltic birch tour grade cabinet Compatible with NXL23-A (stacking) Compatible with NXL24-A (stacking) Multiple configurations with HDL 10-A and HDL 20-A  

AYRA Sub 10 is a 10” professional subwoofer system that is designed especially for the AYRA near field active monitors, but works perfectly in other applications as a stand-alone subwoofer. The AYRA Series is optimized to deliver the best sound for a variety of applications. Whether you are working with a near field mix at your home studio, you need a clear and loud sound for your multimedia gaming or simply need some good monitors for your personal computer.Χαρακτηριστικά:True active 250 W class AB design 35 Hz – 130 Hz frequency response Stereo input board, stereo x-over output Selectable low pass filter 10" composite fibreglass woofer Low distortion reflex port Lacquer painted medium density cabinet​​

The NX 32-A is an active speaker specifically designed to be the everyday tool for rental companies and professional musicians. It’s one of the most flexible speaker for deploying high-quality sound as a stand-alone FOH system or as a satellite (with subwoofer) but either as a stage monitor or a or a front, down or side fill speaker.RCF speakers are designed using a proprietary and advanced FiR filtering technology, conceived to deliver transparent sound, absolute clarity and perfect stereo images to the listener. The special FiRPHASE filters allow to achieve coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies to the system.Προδιαγραφές:1400 W 2-way class-D amplifier131 dB SPL Max50 – 20000 Hz Frequency Range90° x 60° constant directivity coverage12" woofer, 2.5" voice coilHorn loaded 3.0''neodymium c. driverMultiple rigging pointsΧαρακτηριστικά:RCF NX 32-A active speakerPower capacity: Peak: 1400 WMax. SPL: 131 dBFrequency response: 50 Hz - 20 kHzDispersion: 90 x 60°Wofer: 12 in, 3-inch voice coilTweeter: 1.4 in, 3-inch voice coilInput: XLR, jackOutput: XLRCrossover frequencies: 700 HzProtection: thermal, RMSLimiter: soft limiterControls: Volume, Boost, Mic/LineDimensions: 60 x 36.5 x 37.8 cmWeight: 21.1 kg 

The NXL 24-A is an active column speaker array system composed by 4 x 6” high power woofers and a 2.5” voice coil compression driver loaded from a waveguide on a 100° x 30° constant directivity horn. The amplifier delivers 1400 Watt and is controlled by a DSP that takes care of crossover, equalisation, phase alignment, soft limiting and speaker protections. Equalisations are available to operate with a single column or in pairs.RCF speakers are designed using a proprietary and advanced FiR filtering technology, conceived to deliver transparent sound, absolute clarity and perfect stereo images to the listener. The special FiRPHASE filters allow to achieve coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies to the system.Προδιαγραφές:1400 Watt131 dB max SPL65 Hz 20 kHz frequency response4 x 6" Woofers2.5" voice coil RCF Precision C. Driver on waveguide100° x 30° slightly tilted pattern controlDSP controlled Input section with single or dual eq. presetPole mountable, Stackable, FlyableBaltic Birch Plywood enclosure with internal structural metal bracingsΧαρακτηριστικά:Frequency Response -3 Db: 65 Hz ÷ 20000 HzMax SPL: 131 dBHorizontal coverage angle: 100°Vertical coverage angle: 30°Compression Driver: 1.4", 2.5" v.c.Woofer: 4 x 6", 1.5" v.c.nput connectors: Jack- XLR maleOutput connectors: XLR femaleInput sensitivity: -2 dBu / + 4 dBuCrossover frequencies: 800 HzProtections: thermal, rmsLimiter: soft limiterControls: Volume, EQ Shape, Mic/ Line 

The NX 45-A is an active speaker specifically designed to be the everyday tool for rental companies and professional musicians. It’s one of the most flexible speaker for deploying high-power and pristine sound as a stand-alone FOH system or as a satellite (with subwoofer) but either as a stage monitor or a front, down or side fill speaker.RCF speakers are designed using a proprietary and advanced FiR filtering technology, conceived to deliver transparent sound, absolute clarity and perfect stereo images to the listener. The special FiRPHASE filters allow to achieve coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies to the system.Προδιαγραφές:1400 W 2-way class-D amplifier133 dB SPL Max45 – 20000 Hz Frequency Range90° x 50° constant directivity coverage15" neodymium woofer, 3.5" voice coilHorn loaded 4.0''neodymium c. driverMultiple rigging pointsΧαρακτηριστικά:Frequency Response: 45 Hz ÷ 20000 HzMax Spl @ 1M: 133 dBHorizontal Coverage Angle: 90°Vertical Coverage Angle: 50°Compression Driver: 1.4'' neo, 4.0'' v.cWoofer: 15'' neo, 3.5'' v.cInput Signal: bal/unbalInput Connectors: XRL, JackOutput Connectors: XLRInput Sensitivity: -2 dBu/+4 dBuCrossover Frequencies: 650 HzProtections: Thermal, RMSLimiter: Soft LimiterControls: Volume, Boost, Mic/Line 

The NX 10-SMA is equipped with new high power 400 W digital amplifier and a newly designed 10 " coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system. The NX 10-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes: - Floor, for stage monitoring; - Free Field, for the use of the speakers as a stand-alone PA system. Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road. An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker.Προδιαγραφές:800 Watt Peak, 400 Watt RMS digital bi-amplification127 dB max spl60° x 60° constant directivity horn10" High power neodymium woofer, 2.5" voice coil1.7 kapton dome, 1" exit, neodymium high frequency driverDSP processing, floor - fre field equalization, soft limiter and protectionCombo xlr/jack input, xlr signal outputΧαρακτηριστικά:Frequency Response -3 dB: 60 Hz ÷ 20000 HzMax SPL: 127 dBHorizontal coverage angle: 60°Vertical coverage angle: 60°Compression Driver: 1.7 kapton dome, 1" exit, neodymiumWoofer: 10" neo high power woofer, 2.5" voice coilInput connectors: xlr, jackOutput connectors: xlrLimiter: Soft LimiterControls: Freefield, floorTotal power: 800 W PEAKHigh frequencies: 200 W PeakLow frequencies: 600 W PeakTotal power: 400 W RMSHigh frequencies: 100 W RMSLow frequencies: 300 W RMS 

The NX 12-SMA is equipped with new high power 700 W digital amplifier and a newly designed 12” coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system. The NX 12-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side.In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes: - Floor, for stage monitoring; - Free Field, for the use of the speakers as a stand-alone PA system. Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road. An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker.Προδιαγραφές:1400 Watt Peak, 700 Watt RMS digital bi-amplification129 dB max spl60° x 60° constant directivity horn12" High power neodymium woofer, 2.5" voice coil1.7" kapton dome, 1" exit, neodymium high frequency driverDSP processing, floor - fre field equalization, soft limiter and protectionCombo xlr/jack input, xlr signal outputΧαρακτηριστικά:Frequency Response -3 dB: 50 Hz ÷ 20000 HzMax SPL: 129 dBHorizontal coverage angle: 60°Vertical coverage angle: 60°Compression Driver: 1.7" kapton dome, 1" exit, neodymiumWoofer: 12" neo high power woofer, 2.5" voice coilInput connectors: xlr, jackOutput connectors: xlrLimiter: Soft LimiterControls: Freefield, floorTotal power: 1400 W PEAKHigh frequencies: 400 W PeakLow frequencies: 1000 W PeakTotal power: 700 W RMSHigh frequencies: 200 W RMSLow frequencies: 500 W RMS 

ST Series is a practical solution for high intelligibility speech and audio applications, covering infill or delay, production studios, presentations and high power music sound reinforcement with or without subwoofers. A key requirement for everyday audio systems, delivering simple ‘plug and play’ solutions, without compromising performance and portability. Legendary RCF transducer technology coupled with state of the art digital amplification topology resulting in a perfectly optimised loudspeaker series. The ST Series provides high end audio coverage even at extreme sound pressure levels, unmatched reliability and acoustic compatibility across the whole series.Προδιαγραφές:800 Watt Peak, 400 Wat RMS129 dB max SPL45 Hz - 20 kHz frequency response12" Woofer, 2.5" voice coil1" Driver, 1.4" voice coilΧαρακτηριστικά:Frequency Response -3 Db: 45 Hz ÷ 20 HzMax Spl: 129 DbHorizontal Coverage Angle: 90°Vertical Coverage Angle: 60°Compression Driver: 1", 1.4" Voice CoilWoofer: 12", 2.5" Voice CoilInput Signal: Bal/UnbalInput Connectors: Jack-Xlr MaleOutput Connectors: Xlr FemaleCrossover Frequencies: 1400 HzProtections: Rms Limiter, HfLimiter: Fast LimiterTotal Power: 800 W Peak 

ST Series is a practical solution for high intelligibility speech and audio applications, covering infill or delay, production studios, presentations and high power music sound reinforcement with or without subwoofers. A key requirement for everyday audio systems, delivering simple ‘plug and play’ solutions, without compromising performance and portability.Legendary RCF transducer technology coupled with state of the art digital amplification topology resulting in a perfectly optimised loudspeaker series. The ST Series provides high end audio coverage even at extreme sound pressure levels, unmatched reliability and acoustic compatibility across the whole series.Προδιαγραφές:800 Watt Peak, 400 Wat RMS129 dB max SPL45 Hz - 20 kHz frequency response12" Woofer, 2.5" voice coil1" Driver, 1.4" voice coilΧαρακτηριστικά:Frequency Response -3 Db: 45 Hz ÷ 20 HzMax Spl: 131 DbHorizontal Coverage Angle: 90°Vertical Coverage Angle: 60°Compression Driver: 1", 1.4" Voice CoilWoofer: 15" Neo, 2.5" Voice CoilInput Signal: Bal/UnbalInput Connectors: Jack-Xlr MaleOutput Connectors: Xlr FemaleCrossover Frequencies: 1400 HzProtections: Rms Limiter, HfLimiter: Fast Limiter 

The 4PRO 1031-A is a two-way active bass reflex loudspeaker offering extraordinary compact size, high output and vocal fidelity. It provides low distortion and consistent polar response in a flyable lightweight enclosure. The 4PRO 1031-A comprises a 10” woofer and a 1.4” voice coil compression driver that is mounted to a 90° x 60° constant directivity horn.RCF speakers are designed using a proprietary and advanced FiR filtering technology, conceived to deliver transparent sound, absolute clarity and perfect stereo images to the listener. The special FiRPHASE filters allow to achieve coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies to the system.Προδιαγραφές:800 WATT PEAK, 400 WATT RMS127 dB max spl90 x 60, Wide dispersion constant directivity horn10" woofer, 2" voice coil1" HF driver,1.4" voice coilΧαρακτηριστικά:Frequency Response -3 Db: 50 Hz � 20000 HzMax Spl: 127 DbHorizontal Coverage Angle: 90°Vertical Coverage Angle: 60°Compression Driver: 1", 1.4" Voice CoilWoofer: 10", 2" Voice CoilInput/output SectionInput Signal: Bal / UnbalInput Connectors: Combo Xlr-jckOutput Connectors: XlrInput Sensitivity: - 2 Dbu / +4 DbuProcessor SectionCrossover Frequencies: 1800 HzProtections: Thermal, RmsLimiter: Fast LimiterControls: Volume, Eq Shape, Mic/lineAmplifier SpecificationsTotal Power: 800 W Peak 

The 4PRO 2031-A is a two-way active bass reflex loudspeaker offering exceptional full range and accurate reproduction. The 12” woofer delivers a fast and accurate reproduction of the midbass frequency range and controlled deep bass while the 1” compression driver offers a very open and natural midrange sound and extreme precision high frequencies reproduction.The 4PRO 2031-A comprises a 12” woofer and a 1.7” voice coil compression driver that is mounted to a 90° x 60° constant directivity horn.RCF speakers are designed using a proprietary and advanced FiR filtering technology, conceived to deliver transparent sound, absolute clarity and perfect stereo images to the listener. The special FiRPHASE filters allow to achieve coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies to the system.Προδιαγραφές:1200 WATT PEAK, 600 WATT RMS129 dB max spl90 x 60, Wide dispersion constant directivity horn12" woofer, 2.5" voice coil1" HF driver,1.7" voice coilΧαρακτηριστικά:Frequency Response -3 Db: 45 Hz � 20000 HzMax Spl: 129 DbHorizontal Coverage Angle: 90°Vertical Coverage Angle: 60°Compression Driver: 1", 1.7" Voice CoilWoofer: 12", 2.5" Voice CoilInput/output SectionInput Signal: Bal / UnbalInput Connectors: Combo Xlr-jckOutput Connectors: XlrInput Sensitivity: - 2 Dbu / +4 DbuProcessor SectionCrossover Frequencies: 1700 HzProtections: Thermal, RmsLimiter: Fast LimiterControls: Volume, Eq Shape, Mic/lineAmplifier SpecificationsTotal Power: 1200 W PeakHigh Frequencies: 400 W PeakLow Frequencies: 800 W PeakTotal Power: 600 W Rms​ 

EVOX 12 is the most powerful line-source in its class and offers a particularly profound and dynamic reproduction at high levels due to the built-in 1400W power amplifier. The top section has eight high performance neodymium 4 “full-range transducers with a phase plug. As a result, the EVOX 12 has a significantly increased low-mid playback at a constant level with a wide dispersion for the highs. The 15” subwoofer delivers powerful bass sound to reinforce a big party or the kick drum of a live band. Despite high performance, the enclosure is very compact, and thanks to integrated wheels and extendable handle very easy to transport.RCF's Class-D power amplifier technology packs huge performance operating with high efficiency into a lightweight solution. EVOX amplifiers deliver ultra-fast attack, realistic transient response and impressive audio performance. The amplifier features a solid mechanical aluminium structure which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. The EVOX amplifiers present SMPS power supply section in order to produce maximum output and minimum transportation weight.Προδιαγραφές:1400 Watt130 dB max SPL40 Hz 20 kHz frequency response15" Woofer8 x 4" neodymium full-range woofer90° x 30° slightly tilted pattern controlInnovative DSP processingPole mountable, easy set-up and transportationΧαρακτηριστικά:Frequency Response 40Hz ÷ 20000 HzMax Spl: 130 DbHorizontal Coverage Angle: 90°Vertical Coverage Angle: 30°