Καλώδια Balanced

Introducing Premium Cables By Warm AudioAt Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations!Highest Quality PossibleWith Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them!What Does “StarQuad” Mean?A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable. What Is Double-Reussen Shielding?Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm AudioAt Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations!Highest Quality PossibleWith Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them!What Does “StarQuad” Mean?A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable. What Is Double-Reussen Shielding?Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm AudioAt Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations!Highest Quality PossibleWith Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them!What Does “StarQuad” Mean?A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable. What Is Double-Reussen Shielding?Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm AudioAt Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations!Highest Quality PossibleWith Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them!What Does “StarQuad” Mean?A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable. What Is Double-Reussen Shielding?Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm AudioAt Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations!Highest Quality PossibleWith Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them!What Does “StarQuad” Mean?A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable. What Is Double-Reussen Shielding?Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm AudioAt Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations!Highest Quality PossibleWith Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them!What Does “StarQuad” Mean?A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable. What Is Double-Reussen Shielding?Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Balanced male jack to female XLRCable cross-section: 2 x 0.20 mm²With Neutrik (Rean) connectorsGold-plated contactsCasing: black metalHand-solderedLength: 3 m

Kαλώδιο από ένα XLR-3 αρσενικό σε ένα καρφί 6.3mm stereo αρσενικό 2m

Καλώδιο Jack male stereo - σε - XLR male. 1.5 μέτρα.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Introducing Premium Cables By Warm Audio At Warm, we always put customers front and center in our decision-making. You are the reason that we put so much time and effort into ensuring that the products we bring to market sound amazing, are as affordable as possible and inspire endless creativity - we’re serious about this stuff!We’re also serious about recording as an art, and we’re always looking for ways to help our customers achieve their sonic goals. With that mission in mind we partnered with Switzerland-based Gotham AG - Europe’s top producer of premium cable - to provide the cable stock for our entire new line of interconnects, and the results have exceeded our expectations! Highest Quality Possible With Warm Cables we knew that we wanted to offer the highest quality possible at a price low enough for everyone to afford, with construction robust enough that we could offer a lifetime warranty. Well known as the original supplier to some of the industry’s elite manufacturers (their 3-conductor wire was known simply as “the Neumann Cable” for decades), Gotham’s cable construction techniques and technology now represent the current state-of-the-art. We couldn’t be happier to partner with them on these new cables, and we can’t wait for you to use them! What Does “StarQuad” Mean? A traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.   What Is Double-Reussen Shielding? Most cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference. Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Pro Series - Studio & Live TRS Cable 20' (6.1 meters)

Pro Series - Studio & Live TRS Cable 510 (3.0 meters)

Pro Series - Studio & Live TRS Cable 5' (1.5 meters)

Pro Series - Studio & Live TRS Cable 3' (0.9 meters)

Pro Series - Studio & Live XLR Male to TRS Male 6' (1.8 meters)

Pro Series - Studio & Live XLR Male to TRS Male 3' (0.9 meters)

Καλώδιο για ηλεκτρονικές συσκευές. 6,3 mm stereo jack αρσενικό-3,5 mm stereo jack αρσενικό.Μήκος καλωδίου 1,5 m.

Καλώδιο για ηλεκτρονικές συσκευές. 6,3 mm stereo jack αρσενικό-3,5 mm stereo jack αρσενικό.Μήκος καλωδίου 3 m.

Καλωδιο line XLR αρσενικό-Line jack balanced 3 μέτρων

Στερεοφωνικό καλώδιο υψηλής ποιότητας TRS 1/4 -TRS 1/4 κλάσης Β, 2.0 m.

Στερεοφωνικό καλώδιο υψηλής ποιότητας 1/4 TRS-XLR female 2m.

Στερεοφωνικό καλώδιο υψηλής ποιότητας 1/4 TRS-XLR male 3.0 m.

Καλώδιο Jack Stereo Male 6.3mm –XLR Male με βύσματα Neutrik και καλώδιο Cordial CMX222 με διάσταση 2.50m.

Καλώδιο Jack Stereo Male 6.3mm – Jack Stereo Male 6.3mm  με βύσματα Neutrik και καλώδιο Cordial CMX222 με διάσταση 2.50m.

Καλώδιο Jack Stereo Male 6.3mm –XLR Male με βύσματα Neutrik και καλώδιο Cordial CMX222 με διάσταση 5m.

Καλώδιο Jack male stereo - σε -  XLR male. 3 μέτρα.

Καλώδιο, XLR αρσενικό σε καρφί 1/4 stereo, 60 εκατοστά.

Καλώδιο, XLR αρσενικό σε καρφί 1/4 stereo, 3 μέτρα.

Καλώδιο, XLR αρσενικό σε καρφί 1/4 stereo, 5 μέτρα.

Καλώδιο, XLR αρσενικό σε καρφί 1/4 stereo, 1 μέτρο.

1XLR3M->J3P63M 2m PROEL.

XLR male σε JACK 6.3 mm stereo male 5 μέτρα.

Jack male Stereo - σε- Jack male Stereo 3 μέτρα

Jack male Stereo - σε - Jack male Stereo 5 μέτρα

2x XLR Male - σε -  2x Jack mono Male - 2 μέτρα