Καλώδια Οργάνων

Καλώδιο MIDI 5pin 1.5 μ μέτρα.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

Premier Vs. ProWarm makes two lines of cable - Premier and Professional - in order to offer a wide variety of connection types in two different price ranges. While both product lines take advantage of Gotham AG’s state-of-the-art construction to deliver near-perfect signal transfer and both offer a lifetime warranty, the Premier line adds above-and-beyond features like gold-plated connectors, four-conductor Starquad construction for powerful rejection of EMI, and Double-Reussen shielding for increased rejection of RFI.There simply is no better-sounding or more reliable cable on the planet, and Warm cables don’t come with a gold-plated price tag - these are wires that everyone can afford! Compared to other high-end cables offering lifetime warranties, Warm Audio cables cost 25-35% less on average.Pure Signal, No AdditivesWarm Audio cables do not add gain, color, effects, or try to add anything “extra” to your signal. The purists here at Warm believe that premium cables should “Do no harm”, transferring interference-free signal from connection to connection.Warm Audio Premium Cable FeaturesStarQuad ConstructionA traditional balanced cable uses three cores of wire to carry the audio signals: one shielded core for the hot/positive leg, one shielded core for the cold/negative leg (which is wired in reverse polarity to the positive leg), and a plain outer wrap that functions as the ground. A balanced audio system effectively rejects most induced noise encountered along the cable’s length by removing signals that are common to both the hot and cold legs.StarQuad construction takes that concept even further, by using four cores instead of two: two cores each for the hot/positive and cold/negative legs and a single ground. This helps to further shield the audio from RFI (radio frequency interference) even more than a traditional 3-conductor cable.Double-Reussen ShieldingMost cable construction techniques use an outer wrap of wire to act as the ground. Some manufacturers braid this wire, while others simply wrap the wires in a highly uniform way to shield the interior wires from interference.Double-Reussen shielding goes much further than more traditional techniques in two ways: First, the cable is wrapped with not one but TWO separate shields, and second, the outer shield is wrapped in a contrary direction to the inner shield. This creates a stronger and more complete shield from RFI for the internal cores, and can result in an astounding reduction of interference. Double-Reussen shielding is a tad more expensive to manufacture, but for those who will accept nothing but the best it represents the pinnacle of current balanced cable technology.

3,5mm TRS to male DIN 5150cm lenghtCompatible Manufacturers: Arturia

3,5mm TRS to male DIN 5150cm lenghtCompatible Manufacturers: Akai, Korg, Make Noise, ADDAC, Critter & Guitari, Dreadbox, Intellijel, Teenage Engineering...

Pro Series - 1 End Rgt-Angle Instrument Cable 20' (6.1 meters)

Pro Series - 1 End Rgt-Angle Instrument Cable 10' (3.0 meters)

Pro Series - Both Ends Rgt-Angle Instrument Cable 1' (0.3 meters)

Pro Series - Both Ends Rgt-Angle Instrument Cable 6 inch (0.2 meters)

Pro Series - Studio & Live TS Cable 20' (6.1 meters)

Pro Series - Studio & Live TS Cable 10' (3 meters)

Pro Series - Studio & Live TS Cable 5' (1.5 meters)

Mogami 2524 καλώδιο οργάνου 1 x 0,56 mm2 από χαλκό χωρίς οξυγόνο (OFC), περίβλημα PVC και διάμετρο 6mm.Καλώδιο χαμηλού θορύβου & υψηλής αντίστασης, ιδανικό για κιθάρα. Θωράκιση με πλέγμα χαλκού & ημιαγωγό άνθρακαΧαρακτηριστικά:Κατηγορία Καλωδίου: Καλώδιο ΟργάνουΤύπος Σήματος: ΑναλογικόΧαρακτηριστικά: OFCΑριθμός Καναλιών: 1Αριθμός Αγωγών: 1Διατομή: 0.56 mm2Εξωτερική Διάµετρος: 6mmΥλικό Περιβλήματος: PVCAWG: 20Χρώμα: ΜαύροΒάρος ανά Μέτρο (kg): 0,056

Κορυφαίας ποιότητας 0.5m αναλογικό snake 8 balanced καναλιών εισόδου σε θηλυκά XLR (με το κάθε επιμέρους καλώδιο να φέρει αρίθμηση), που διαθέτει εξαιρετικής ποιότητας θωράκιση συνδυασμένη με εξαιρετικά μικρή χωρητικότητα.Η χωρητικότητα μεταξύ των αγωγών Hot και Cold είναι ίση με 12 pF/m (πολύ χαμηλότερη από τη συντριπτική πλειοψηφία των μικροφωνικών - line καλωδίων ενός καναλιού!), ενώ η χωρητικότητα μεταξύ του κάθε αγωγού και της γείωσης είναι ίση με 130 pF/m.Χρησιμοποιούνται επίχρυσα θηλυκά XLR της Neutrik, DSub-25 βύσμα Amphenol με επίχρυσες επαφές, και μεταλλικό καπάκι για το DSub.                   

Κορυφαίας ποιότητας 0.5m αναλογικό snake 8 balanced καναλιών εισόδου σε θηλυκά Jack 1/4" (με το κάθε επιμέρους καλώδιο να φέρει αρίθμηση), που διαθέτει εξαιρετικής ποιότητας θωράκιση συνδυασμένη με εξαιρετικά μικρή χωρητικότητα.Η χωρητικότητα μεταξύ των αγωγών Hot και Cold είναι ίση με 12 pF/m (πολύ χαμηλότερη από τη συντριπτική πλειοψηφία των μικροφωνικών - line καλωδίων ενός καναλιού!), ενώ η χωρητικότητα μεταξύ του κάθε αγωγού και της γείωσης είναι ίση με 130 pF/m.Χρησιμοποιούνται θηλυκά Jack 1/4" της Neutrik, DSub-25 βύσμα Amphenol με επίχρυσες επαφές, και μεταλλικό καπάκι για το DSub.    

Κορυφαίας ποιότητας 0.5m αναλογικό snake 8 balanced καναλιών εξόδου σε αρσενικά XLR (με το κάθε επιμέρους καλώδιο να φέρει αρίθμηση), που διαθέτει εξαιρετικής ποιότητας θωράκιση συνδυασμένη με εξαιρετικά μικρή χωρητικότητα.Η χωρητικότητα μεταξύ των αγωγών Hot και Cold είναι ίση με 12 pF/m (πολύ χαμηλότερη από τη συντριπτική πλειοψηφία των μικροφωνικών - line καλωδίων ενός καναλιού!), ενώ η χωρητικότητα μεταξύ του κάθε αγωγού και της γείωσης είναι ίση με 130 pF/m.Χρησιμοποιούνται επίχρυσα αρσενικά XLR της Neutrik, DSub-25 βύσμα Amphenol με επίχρυσες επαφές, και μεταλλικό καπάκι για το DSub.                 

Κορυφαίας ποιότητας 0.5m AES/EBU snake με 4 κανάλια εισόδου και 4 κανάλια εξόδου σε θηλυκά και αρσενικά XLR αντίστοιχα (με το κάθε επιμέρους καλώδιο να φέρει αρίθμηση). Το εν λόγω καλώδιο διαθέτει εξαιρετικής ποιότητας θωράκιση συνδυασμένη με εξαιρετικά μικρή χωρητικότητα.Χρησιμοποιούνται επίχρυσα θηλυκα και αρσενικά της Neutrik, DSub-25 βύσμα Amphenol με επίχρυσες επαφές, και μεταλλικό καπάκι για το DSub επίσης της Amphenol. 

Καλώδιο MIDI 5pin 5 μ μέτρα.

Καλώδιο Midi – σε - Midi - 1.5 μέτρα 

Καλώδιο Midi – σε - Midi - 0,5 μέτρο

Καλώδιο σύνδεσης DB25 με 8 XLR Female. Μήκος 3.6 μέτρα.

 Καλώδιο σύνδεσης DB25 με 8 XLR Male. Μήκος 3.6 μέτρα.

Καλώδιο σύνδεσης DB25 με 4 XLR Male και 4 XLR Female. Μήκος 3.6 μέτρα.

Καλώδιο υψηλής ποιότητας για σύνδεση δύο συσκευών με βύσματα DB25. Μήκος 6.7 μέτρα.

 Καλώδιο υψηλής ποιότητας για σύνδεση δύο συσκευών με βύσματα DB25. Μήκος 3.6 μέτρα.

To  C|24 DB25 Cable Kit περιλαμβάνει όλα τα απαραίτητα καλώδια για να συνδέσετε την επιφάνεια εργασίας C|24 σε οποιοδήποτε σύστημα Pro Tools|HDμε κάρτα ήχου 192 I/O. Το σετ περιλαμβάνει τα παρακλατω 13 καλώδια:DB25–DB25 cable (4)Περιλαμβάνει 4 καλώδια των 7.6 μ. για σύνδεση:Pro Tools Input (Monitor section)Surround Input (Monitor section)Line Outputs 1–8 (mic/line/DI preamps)Line Outputs 9–16 (mic/line/DI preamps)DB25–XLR Male cable (1)Περιλαμβάνει 1 καλώδιο 7.6 μ. για σύνδεση:5.1 Control Room Out (Monitor section)DB25–XLR Female cable (2)Περιλαμβάνει 2 καλώδια των 7.6 μ. για σύνδεση:Mic Inputs 1–8 (preamps)Mic Inputs 9–16 (preamps)DB25–TRS cable (6)Περιλαμβάνει 6 καλώδια των 7.6 μ. για σύνδεση:Submixer Inputs 1–4 (line submixer)Submixer Inputs 5–8 (line submixer)Ext Stereo InputsCue OutputsLine/DI Inputs 1–8Line/DI Inputs 9–16

Τα καλώδια Digilink έχουν σχεδιαστεί για να συνδέουν ένα περιφερειακό HD I/O (όπως τα 192 I/O και 96 I/O) με κάρτα HD PCI , ή HD I/O και σε ενα επιπλέον HD I/O, καθώς μπορείτε να συνδέσετε δύο HD I/O αλυσιδωτά, μπορεί να συνδέονται μεταξύ τους (διμηοθργόντας μια ενιαία, καθαρή σύνδεση DIGILINK μεταξύ πολλαπλών I/O και CPU).

Τα καλώδια Digilink έχουν σχεδιαστεί για να συνδέουν ένα περιφερειακό HD I/O (όπως τα 192 I/O και 96 I/O) με κάρτα HD PCI , ή HD I/O και σε ενα επιπλέον HD I/O, καθώς μπορείτε να συνδέσετε δύο HD I/O αλυσιδωτά, μπορεί να συνδέονται μεταξύ τους (διμηοθργόντας μια ενιαία, καθαρή σύνδεση DIGILINK μεταξύ πολλαπλών I/O και CPU).* Το DIGILINK 100' δεν υποστηρίζε συνχότητα δειγματοληψίας άνω των 96 kHz.

Τα καλώδια Digilink έχουν σχεδιαστεί για να συνδέουν ένα περιφερειακό HD I/O (όπως τα 192 I/O και 96 I/O) με κάρτα HD PCI , ή HD I/O και σε ενα επιπλέον HD I/O, καθώς μπορείτε να συνδέσετε δύο HD I/O αλυσιδωτά, μπορεί να συνδέονται μεταξύ τους (διμηοθργόντας μια ενιαία, καθαρή σύνδεση DIGILINK μεταξύ πολλαπλών I/O και CPU).* Το DIGILINK 100' δεν υποστηρίζε συνχότητα δειγματοληψίας άνω των 96 kHz.

Τα καλώδια Digilink έχουν σχεδιαστεί για να συνδέουν ένα περιφερειακό HD I/O (όπως τα 192 I/O και 96 I/O) με κάρτα HD PCI , ή HD I/O και σε ενα επιπλέον HD I/O, καθώς μπορείτε να συνδέσετε δύο HD I/O αλυσιδωτά, μπορεί να συνδέονται μεταξύ τους (διμηοθργόντας μια ενιαία, καθαρή σύνδεση DIGILINK μεταξύ πολλαπλών I/O και CPU).* Το DIGILINK 100' δεν υποστηρίζε συνχότητα δειγματοληψίας άνω των 96 kHz.

Αν διαλέξεις το σωστό καλώδιο θα ακούσεις την διαφορά ! Tο SOMMER QUANTUM HIGHFLEX,  είναι ένα καλώδιο  multi 8  καναλιών, ένα από τα καλύτερα καλώδια με διάμετρο  μόνο 13,8 mm.

Midi signal Male - σε - Male - 3 μέτρα 

Κορυφαίο balanced Mic/Line καλώδιο Mogami MOD. 2549-00 3m.  με εξαιρετικής ποιότητας θωράκιση συνδυασμένη με πολύ χαμηλή χωρητικότητα.Η χωρητικότητα μεταξύ των αγωγών Hot και Cold είναι ίση με 11 pF/m (πολύ χαμηλότερη από τη συντριπτική πλειοψηφία των μικροφωνικών - line καλωδίων), ενώ η χωρητικότητα μεταξύ του κάθε αγωγού και της γείωσης είναι ίση με 76 pF/m.Τα περισσότερα ηλεκτρικά μουσικά όργανα (ηλ. κιθάρες, ηλ. μπάσσα κλπ.) συλλαμβάνουν τον ήχο μέσω κυκλωμάτων υψηλής εμπέδησης οδηγούμενων από τάση. Χαρακτηρίζονται λοιπόν από την πολύ μικρή ροή ηλεκτρικού ρεύματος.Συνεπώς, ο μικροφωνικός θόρυβος των καλωδίων διασύνδεσης (ο θόρυβος δηλαδή που γεννάται όταν το καλώδιο δονείται ή χτυπιέται ελαφρά, όνταςμέρος ενός δικτύου υψηλής εμπέδησης) καθίσταται ένας ιδιαίτερα κρίσιμος παράγοντας.Το εν λόγω καλώδιο χαρακτηρίζεται από τις εξαιρετικά χαμηλές τιμές Ηλεκτροστατικού και Μικροφωνικού θορύβου (ολόκληρες τάξεις μεγέθουςμικρότερες σε σχέση με τα συνηθισμένα μικροφωνικά - line καλώδια) που εξασφαλίζουν την απόλυτη ησυχία στις διασυνδέσεις σας. Σημείωση: Χάρη στις εξαιρετικές επιδόσεις του σε ό,τι αφορά στα επίπεδα Μικροφωνικού και Ηλεκτροστατικού θορύβου, το εν λογω καλώδιο ενδέχεταινα αποδειχθεί ιδιαιτέρως κατάλληλο και ως καλώδιο διασύνδεσης του pick-up με το phonostage, ειδικά αν το αναλογικό σας setup παρουσιάζει προβλήματα θορύβου. Στον τερματισμό του χρησιμοποιούνται επίχρυσα βύσματα Neutrik ή (και) Switchcraft.                                

Γωνιακό καλώδιο patch 30εκ. jack to jack.

Γωνιακό καλώδιο patch 50εκ. jack to jack.

Γωνιακό καλώδιο Patch, 0,15m, Jack to Jack, 3 τεμάχια.