Focusrite Red 16Line

SYSTEM REQUIREMENTS

• Other: Internet connection for downloading and installing software and driver
• SIMULTANEOUS INPUTS & OUTPUTS
• Channel Count: Up to 64 x 64

MICROPHONE INPUTS

• Gain Range: 0-8dB to 63dB in 1dB steps
• Type: Electronically Balanced, Zin = 20kΩ
• Max. Input Level: >+19dBu, min gain
• Frequency Response: 20Hz - 35kHz ±0.2dB
• THD + N: -102dB (0.0008%) @ -1dBFS
• EIN: <-129dBu 'A'-Weighted (typical)
• Signal-To-Noise Ratio: 119dB 'A'-Weighted (typical)
• Common-Mode Rejection Ratio: 50/60Hz CMRR: -70dB
• Phantom Power: +48V, independently switchable per channel.
• HPF: High-Pass Filter (HPF): -3dB @ 80 ± 3Hz, 12dB/Octave, independently switchable per channel
• Air Mode: 2dB boost at 10kHz and -2dB at 20Hz (ref 1kHz). Input impedance drop to 2.2kO

LINE INPUTS 1-16

• 0 DBFS Reference Level: +18 or +24dBu (switchable)
• Line Inputs 1-16 0 DBFS Reference Leve: +18 or +24dBu (switchable)
• Line Inputs 1-16 Type: Electronically Balanced, Zin = 20kO
• Line Inputs 1-16 Frequency Response: 20Hz - 35kHz ±0.2dB
• Line Inputs 1-16 THD + N: -102dB (0.0008%) @ -1dBFS
• Line Inputs Signal-To-Noise Ratio: 119dB 'A'-Weighted (typical)
• Line Inputs 1-16 Common-Mode Rejection Ratio: 50/60Hz CMRR: -70dB

INSTRUMENT INPUTS

• Instrument Inputs Gain Range:0-8dB to 63dB in 1dB steps
• Instrument Inputs Type: Zin = 2.3MO
• Instrument Inputs Max. Input Level: >+15dBu, min gain
• Instrument Inputs Frequency Response: 20Hz - 35kHz ±0.2dB, min gain
• Instrument Inputs THD + N: -100dB (0.001%) @ -1dBFS (@ 11dB Gain)
• Instrument Inputs Signal-To-Noise Ratio: 117dB 'A'-Weighted (typical), min gain
• Instrument Inputs HPF: -3dB @ 80 ± 3Hz, 12dB/Octave, independently switchable per channel
• Instrument Inputs Air Mode: 2dB boost at 10kHz and -2dB at 20Hz (ref 1kHz)

LINE OUTPUTS 1-16

• Line Outputs 1-16 0 DBFS Reference Levels: +18 or +24dBu (switchable)
• Line Outputs 1-16 Frequency Response: 20Hz - 35kHz ±0.2dB
• Line Outputs 1-16 THD + N: <-104dB (0.0006%) unweighted, 20Hz - 20kHz; -1dBFS input
• Line Outputs 1-16 Dynamic Range: 121dB 'A'-weighted (typical), 20Hz - 20kHz
• Line Outputs 1-16 Output Impedance: Nominal output impedance = 136O balanced (68O each phase)

MONITOR OUTPUTS

• Monitor Outputs 0 DBFS Reference Levels: +18dBu
• Monitor Outputs Frequency Response: 20Hz - 35kHz ±0.2dB
• Monitor Outputs THD+N: -80dB (0.01%) unweighted, 20Hz - 20kHz; -1dBFS input
• Monitor Outputs Dynamic Range: 120dB (A-Weighted)
• Monitor Outputs Output Impedance: Nominal output impedance = 136O balanced (68O each phase)

HEADPHONE OUTPUTS

• Headphone Outputs 0 DBFS Reference Levels: +16dBm ± 0.5dB
• Headphone Outputs Frequency Response: 20Hz - 20kHz ±0.2dB
• Headphone Outputs THD + N: <-75dB (0.018%) unweighted, 20Hz - 20kHz
• Headphone Outputs Dynamic Range: 114dB 'A'-weighted (typical), 20Hz - 20kHz
• Headphone Outputs Output Impedance: 10O
• Headphone Outputs Headphone Impedance: 32O - 600O

MICROPHONE CROSSTALK

• Mic Input To Input: < -80dB; 20Hz - 20kHz (driven channel at -20dBFS)
• Mic Input To Output: < -130dB; 20Hz - 20kHz (driven channel at -20dBFS)
• Output To Mic Input: < -165dB; 20Hz - 20kHz (driven channel at -20dBFS)

LINE CROSSTALK

• Line Input To Line Input: < -100dB; 20Hz - 20kHz (driven channel at -20dBFS)
• Line Input To Output: < -150dB; 20Hz - 20kHz (driven channel at -20dBFS)
• Output To Line Input: < -150dB; 20Hz - 20kHz (driven channel at -20dBFS)

OUTPUT CROSSTALK

• Output To Output: < -95dB; 20Hz - 20kHz (driven channel at -20dBFS)

HEADPHONE CROSSTALK

• Headphone To Headphone: < -95dB; 20Hz - 20kHz (driven channel at -20dBFS)

DIGITAL PERFORMANCE

• Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
• Clock Sources: Internal, ADAT 1, ADAT 2, S/PDIF, Word Clock, Loop Sync or from Dante Network Master

FRONT PANEL CONNECTIVITY INSTRUMENT INPUTS

• Instrument Inputs Channel Count: 2 Channels In
• Instrument Inputs Instrument Inputs: 2 x 1/4" TS stereo jack

FRONT PANEL CONNECTIVITY HEADPHONE OUTPUTS

• Headphone Outputs Channel Count: 2 Stereo Channels Out
• Headphone Outputs Headphone Outputs: 2 x 1/4" TRS stereo jack

REAR PANEL CONNECTIVITY THUNDERBOLT

• Thunderbolt Channel Count: Up to 64 In and 64 Out
• Thunderbolt Ports: 2 x Thunderbolt 3 Ports (Primary Port 1 and Primary Port 2)

REAR PANEL CONNECTIVITY PRO TOOLS

• Pro Tools Channel Count: Up to 64 In and 64 Out (32 In and 32 Out per connection)
• Primary Port: 2 x Mini DigiLink

REAR PANEL CONNECTIVITY DANTE

• Dante Channel Count: Up to 32 In and 32 Out
• Dante Input And Output: 2 x ethernet standard RJ45 connectors (Compatible with Cat 5e and above).

REAR PANEL CONNECTIVITY MIC INPUTS

• Mic Inputs Channel Count: 2 In
• Mic Input: 2 x Female XLR

REAR PANEL CONNECTIVITY LINE LEVEL

• Line Level Channel Count: 16 In and 16 Out
• Line Level Input: 2 x DB-25 connectors (AES59)
• Line Level Output: 2 x DB-25 connectors (AES59)

REAR PANEL CONNECTIVITY ADAT

• ADAT Channel Count: Up to 16 In and 16 Out
• ADAT Input: 2 x TOSLINK connector
• ADAT Output: 2 x TOSLINK connector
• ADAT Channel Assignments @ 44.1 KHz, 48 KHz: Port 1 = Channels 1 - 8 , Port 2 = Channels 9 - 16
• ADAT Channel Assignments @ 88.2 KHz, 96 KHz: SMUXI: Port 1 = Channels 1 - 4, Port 2 = Channels 5 - 8
• ADAT Channel Assignments @ 176.4 KHz, 192 KHz: SMUXII: Port 1 = Channels 1 - 2 , Port 2 = Channels 3 - 4

REAR PANEL CONNECTIVITY S/PDIF

• S/PDIF Channel Count: 2 In and 2 Out (Optical up to 96kHz)
• S/PDIF Input: 1 x RCA phono socket (1 x TOSLINK up to 96kHz)
• S/PDIF Output: 1 x RCA phono socket (1 x TOSLINK up to 96kHz)

REAR PANEL CONNECTIVITY MONITOR OUTPUTS

• Monitor Outputs Channel Count: 2 Out
• Monitor Outputs: 2 x 1/4" TRS stereo jack

REAR PANEL CONNECTIVITY LOOP SYNC

LOOP SYNC

• Loop Sync Input: 1 x BNC 75O port
• Loop Sync Output: 1 x BNC 75O port

WORLD CLOCK

• World Clock Input: 1 x BNC 75O port
• World Clock Output: 1 x BNC 75O port

PSU

• PSU: 1 x IEC Input

FRONT PANEL INDICATORS

• OLED Screens: 3 x Screens (menus and metering)

DIMENSIONS

• Height: 44mm/ 1.73"
• Width: 483mm/ 19.02"
• Depth (Chassis Only): 340mm/ 13.39"

WEIGHT

• Weight: 5.04kg

POWER

• Power PSU: 1 x Internal, 100-240V, 50/60Hz, consumption 120W.

HEAT PERFORMANCE

• Operating Temperature: Operates at up to an ambient temperature of 40 degrees Celsius
• Fan: Dual fan