Ενισχυτές

Technics SU-C700EG-S

Premium Class Amplifier Employs innovative fully-digitised processing that delivers a pure and accurate signal to the speakers. Stereo Integrated Amplifier SU-C700 JENO Engine (Jitter Elimination and Noise-shaping Optimization) Just like the R1, the SU-C700 is a fully-digital amplifier and delivers high-resolution digital signals without any distortion being introduced between the input stage and output to the speakers. Technics has developed an original jitter-reduction circuit, avoiding the sound quality degradation due to jitter common to conventional digital amps. It uses a clock generator for the noise-shaping system to reduce jitter in the low-frequency range and a high-precision sample rate converter to suppress jitter in the high-frequency range. LAPC (Load Adaptive Phase Calibration) Technics has developed a speaker impedance optimisation algorithm, using digital signal processing to flatten both the amplitude and phase-frequency response to make the most of your speakers. The result is a sound with better focus, spaciousness and definition. High-speed Silent Linear Power Supply Using a large-current Schottky-barrier diode, a rectifier circuit with electrolytic capacitors, and a stabilised power supply circuit, the SU-C700 ensures ample power supply at all times, even when dynamic music demands high current. Battery Driven Clock Generator Technics used battery power for low-noise applications in analogue amplifiers in the past: here, this same technology is used to improve digital clock precision, enhancing the definition of the sound. High Rigidity Metal Double Chassis To reduce vibration and noise that degrade the purity of sound, the Premium Series features a High Rigidity Metal Double Chassis, using inner and outer steel plates. Various Inputs The SU-C700 supports a wide range of inputs, such as SPDIF, Analogue and Phono, as well as USB-DAC for connection of a PC. The digital input terminal supports coaxial 192-kHz/24-bit PCM and optical 96-kHz/24-bit. The USB DAC input terminal supports 192-kHz 32-bit PCM and 2.8-MHz/5.6-MHz DSD native playback (analogue output) and asynchronous transmission. The SU-C700 converts analogue signals to high-precision 192-kHz/24-bit PCM signals using the A/D converter. The full-digital system achieves high-purity reproduction from any content.

1.299 €

Elipson Music Center Connect HD

The Music Center Connect HD is Elipson’s newest receiver which is now equipped with a Wi-Fi connection. DESCRIPTION Then you will be able to enjoy all the music from streaming platforms (Qobuz, Spotify, Tidal, Deezer, Internet Radio …) or from your stored music files. This class-D amplifier features ICE Power technology. Its power rating is largely sufficient (2x120W), and a comprehensive range of connections is included. In addition to standard inputs and outputs, the Music Center BT HD features an optical input, a Wi-Fi connexion playing Hi-Res audio files (Solo mode) or playing CD quality audio files (Muti-room mode). It is also compatible with the Apt-X HD protocol, which enables playback of high-resolution files up to 24-bits, and a pre-out connection for a power amplifier. A subwoofer may be connected to the SUB output. This output features an adjustable filter which covers frequencies between 50 and 200 Hz, thus guaranteeing optimal compatibility with the main speakers. The touch user interface is situated under the CD slot. The RDS FM tuner adds the finishing touch to this very versatile receiver. To enjoy optimal integration into your living room decor, a specially designed stand featuring a cable path is also available. Simply put, this is one of the rare ultra-connected circular receivers to offer a truly exceptional audiophile-grade listening experience. The Music Center Connect HD is perfectly compatible with the other products of the ELIPSON CONNECT range. SPECIFICATIONS: Amplifier: ICEpower ® 2 x 120W / 4Ω Internal DSP 32bit / 192kHz Radio: FM / DAB / DAB+ with 40 memories   CD player: MP3 / WMA / CDText Compatible   Bluetooth input: SBC, AAC, aptX, aptX HD Codecs   Auxiliary inputs: 2x stereo RCA - 0.55V sensitivity 1x stereo minijack - 0.13V sensitivity   Optical input: TOS LINK input - up to 96KHz   Subwoofer output: 1x RCA output with variable crossover (50 ~ 200 Hz / 12dB/oct) 8V sensitivity   Pre-output: 1x stereo RCA output - 8V sensitivity   USB: Compatible MP3 / WMA + 1A load current   Audio streaming: FLAC,WAV,ALAC,AAC,AAC+,MP3 codecs up to 24bit / 96kHz   Network: Wi-Fi 2,4GHz IEEE 802.11 b/g/n Ethernet Audio multiroom up to 10 rooms, depending on the quality of the network   Power supply: 100-120 / 220-240V - 200W   Operating temperature range: -5 to 40 ºC

875 €

Mola Mola Kula

The integrated that truly belies its size!Imagine a sleek, compact design that oozes class. Imagine an amplifier design that packs enough power to comfortably handle even the most demanding of loudspeakers. Imagine a complex yet agile and easy to use fully transparent line stage. Imagine every possible Phono EQ setting available from the comfort of your listening chair. Imagine a highly acclaimed discrete DAC boasting the best specs and sound around. Imagine, combining all of the above! Reality. Is. Kula! Kula is an a la carte modular design creating a fusion of highly technical previous accomplishments. The chassis itself is borrowed from the acclaimed Makua preamp, as is the line stage section and its optional phono stage with independent adjustable settings and up to 6 separate inputs. The optional DAC section which also is available in the Makua, is identical to the world-class Tambaqui stand-alone unit and features 5 digital inputs including Roon endpoint and Bluetooth. Additionally, the Kula incorporates a Mola Mola exclusive amplifier which boast an output of 150 Watts @8Ω, doubling into 300 Watts @4Ω. Clearly enough power to drive any speaker with ease. I/O3 balanced and 3 unbalanced inputs, selectable by switch and software
2 Pairs of Furutech binding posts. Directly connected to the amplifier PCB using Kubala·Sosna cable. All inputs routable through optional processor boards like the phono stage
Processing balance and input gain offset
Phase invert and mono sum
Full software control of routing and processing 
Mastering mode PerformanceMaximum input level: 20dBu (7.75Vrms) 
Input impedance: 100kohm 
Unweighted Signal/Noise Ratio: 113dB 
2x 150W/8R @1% 1kHz, 2x 300W/4R @1% 1kHz 
2x 100W/8R @0.0005%, 2x 200W/4R @0.00075%, 1kHz 
Output Impedance: 2mΩ – 7mΩ (20-20kHz) (measured directly on binding posts) 
Bandwidth 50kHz @ -3dB 
Gain resolution:

11.900 €

Naim Uniti Atom (HDMI)

To Naim Uniti Atom αποτελεί ένα πανέμορφο multi-source music player,το οποίο θα σας μαγέψει τόσο με την εξαιρετική ποιότητα ήχου την οποία προσφέρει όσο και με τα ιδιαίτερα χαρακτηριστικά του. Ο ενσωματωμένος ενισχυτής των 40 Watt τον οποίο διαθέτει καθώς και η δυνατότητα streaming μουσικής υψηλής ανάλυσης, θα γεμίσουν το χώρο σας με εκπληκτικό ήχο υψηλής πιστότητας (high-fidelity) . Το Uniti Atom είναι ιδανικό τόσο σαν κεντρικό high-end σύστημα, όσο και για χρήση σε χώρους όπως η κουζίνα ή το γραφείο , όπου το μικρό του μέγεθος θα εξυπηρετήσει.  Το μόνο που έχετε να κάνετε είναι να συνδέσετε τα ηχεία. Μέσω της εφαρμογής Naim για iOS και Android το Uniti Atom καθίσταται ακόμα πιο ελκυστικό καθώς όλα τα music sources σας είναι συγκεντρωμένα και οργανωμένα σε ένα μέρος. 

2.499 €

Deal

Musical Fidelity M2si Black

The M2si integrated amplifier takes our peerless premium-amp experience and applies it to a more affordable price point. It boasts trickle-down technology from our mighty and legendary Titan flagship, plus other high-end touches such as solid metal controls. The M2si delivers 76 watts per channel into 8 ohms and 137 watts into 4 ohms. This means the M2si will drive a wide range of speakers, even power-hungry models. Further flexibility is provided by the M2si's excellent connectivity, which includes six line-level inputs and switchable home-theatre throughput. It features a Class A preamp stage with its own, independant power supply, coupled with a discrete pair of power amps. In effect, this means the M2si offers the performance benefits of a pre/power configuration with the compact convenience of a one-box design. Its performance is rock-solid, it's sonically well-rounded and it's comfortable with a wide array of speakers. And it's all served up in an elegant, no-nonsense package. Specifications: Output Power 72 Watts per channel into 8 Ohms (18dBW) Voltage 22 Volts RMS, 20Hz to 20 kHz; onset of clipping 62 Volts peak to peak Current 25 Amps peak to peak Damping factor 36 Output devices 1 pair per channel Line input THD+N < 0.014 % typical, 20Hz to 20 kHz Signal / noise ratio > 96dB ‘A’-weighted Input impedance 40 k Ohms Frequency response +0, –0.1dB, 10Hz to 20 kHz Connections Line level inputs 6 pairs line level RCA connectors Line level outputs 1 pair line level RCA connectors, constant level TAPE outputs 1 pair line level RCA connectors, preamp outputs for e.g. bi-amping Speaker outputs 2 pairs 4mm banana plug/binding posts Power requirement Mains voltages 115/230VAC 50/60Hz (factory pre-set) 100VAC 50/60Hz (alternative) Consumption 320 Watts maximum Weight Unit only, unboxed 9.2 kg (20¼ lbs) In shipping carton 13 kg (30⅔ lbs) Dimensions Wide 440 mm (17⅓”) High, including feet 100 mm (4”) Deep (front to back) including terminals 400 mm (15¾”)

799 €

Naim Nait 5si

The NAIT 5si is our 60W per channel introduction to high-performance integrated amplification. Another Naim Audio amplifier that can claim a common heritage with our classic NAIT model, the NAIT 5si will get straight to the heart of your music. It engages even the most complex rhythms and demanding dynamics with all the grip and authority you would expect from us. Its clever AV bypass mode, which facilitates an easy co-existence of otherwise distinct AV and hi-fi systems, simply adds to its appeal. Features: 60W per channel power output Four inputs with support for both DIN and RCA connections 1/4” (6.35mm) headphone output AV bypass mode for simple connection to an existing AV system Technology & Craft Decades have passed, but the role of the NAIT 5si is fundamentally the same as its original forebear. So the engineering challenge - to maximise performance whilst maintaining engineering efficiency, quality and reliability - hasn't changed. Amplifier technology has moved on considerably however, and while the NAIT 5si occupies the same position in the Naim Audio range as the original NAIT, its performance might be from a different world. The NAIT 5si provides four analogue inputs and a 60 Watt per channel power amplifier. It borrows numerous technologies from across the spectrum of Naim Audio products; all dedicated towards maximising its ability to communicate the fundamentals of music. And communicate it does. The NAIT 5si brings clarity, engaging dynamics and, most of all, infectious enthusiasm to every music source and genre. Audio Inputs Input Impedance: 20kΩ Analogue Input: 2 x DIN, 4 x RCA Input Sensitivity: 150mV Audio Outputs Audio Outputs: Speakers, HDD Other Outputs: Headphone, 1/4" jack Line Outputs Fixed (level): 150mV, 600Ω Finish Case: Black powder coated Front: Black powder coated Physical Shipping Weight: 8.6 kg Shipping Dimensions: 200 x 590 x 500 mm Weight: 6.8 kg Dimensions (HxWxD): 70 x 432 x 301 mm  Power Power Consumption (max.): 300VA Mains Supply: 100V, 115V, 230V; 50 or 60Hz Power Consumption (quiescent): 19VA Speaker Outputs Power Output: 60W/channel, 8Ω Transient: 300VA Supplied with Supplied with: NARCOM-4 Remote Control, Power-Line Lite mains cable (UK denominations only) User Control Front Panel: Volume Control, four button matrix Remote Control: Infra Red (RC5)

1.540 €