Ηχεία Παθητικά

Παθητικό ηχείο 2 δρόμων σε πλαστική καμπίνα με woofer 15" και κόρνα 1,4"Ισχύς 250W RMS/8Ω (1000W max)Διασπορά 90 X 60Απόκριση συχνότητας 53-20000Hz, ευαισθησία 95dB / W /m (126dB max)Είσοδοι με βύσματα speakonΔιαθέτει φωλιά για βάση στήριξης

Παθητικό ηχείο 2 δρόμων σε πλαστική καμπίνα με woofer 8" και κόρνα 1,4"Ισχύς 250W RMS/8Ω (1000W max)Διασπορά 90 X 60Απόκριση συχνότητας 55-20000Hz, ευαισθησία 90dB / W /m (124dB max)Είσοδοι με βύσματα speakonΔιαθέτει φωλιά για βάση στήριξης

Παθητικό ηχείο 2 δρόμων σε πλαστική καμπίνα με woofer 12" και κόρνα 1,4"Ισχύς 250W RMS/8Ω (1000W max)Διασπορά 90 X 60Απόκριση συχνότητας 55-20000Hz, ευαισθησία 93dB / W /m (125dB max)Είσοδοι με βύσματα speakonΔιαθέτει φωλιά για βάση στήριξης

The AMM112 multipurpose loudspeaker features a passive, coaxial two-way design with a 3-inch compression driver, 12-inch low-frequency transducer, and high output: 131 dB peak. Its proprietary Beamwidth Matching Waveguide ensures signature Bose sound quality, delivering consistent frequency response, clarity, and projection across the coverage area — a remarkably powerful audio experience for both performers and audiences. The AMM112 is equally suited for a variety of medium-throw sound reinforcement, monitor, and fill applications in permanent or portable sound systems and offers outstanding vocal clarity and projection. The AMM112 features consistent voicing with Bose AM array modules and Bose AMU utility loudspeakers. So it’s easy to mix and match models from all three lines to create different types of systems.Features Compact high-output design delivers 131 dB peak output via coaxial driver: 3-inch compression driver, 12-inch low frequency driver with shared neodymium magnetMultipurpose versatility for deployment as main, monitor, fill, or delay; extend bandwidth by pairing with the Bose ShowMatch SMS118 subwoofer (FoH applications) or the Bose AMS115 subwoofer (fill applications)Consistent tonality and voicing with Bose AM array modules and Bose AMU utility loudspeakers — easily create entire systems and save substantial time during system configurationProprietary Beamwidth Matching Waveguide ensures signature Bose sound quality, aligning low and high beamwidth through crossover region to deliver excellent tonal consistency across the coverage areaMulti-position enclosure with 110° x 60° coverage angle — easily swap horizontal and vertical coverage by simply rotating cabinet, no disassembly or tools requiredLightweight 22 kg/49 lb cabinet with large, ergonomic handles and 35 mm pole stand adaptor for easy transportation and setupPair with Bose PowerMatch amps and ControlSpace DSP for best performance and loudspeaker protectionDeploy easily in permanent or portable applications with optional U-bracket and suspension bracket accessories or use the 7 integrated M10 inserts for custom suspensionCompanion AMS115 multipurpose subwoofer also available — 15-inch transducer, low frequency down to 35 Hz, 130 dB peak output, 28 kg (63 lb) design with integrated M20 threaded pole mount and 12 M10 threaded inserts for suspension in permanent installations

The AMM108 multipurpose loudspeaker features a passive, coaxial two-way design with a 1.7-inch compression driver, 8-inch low-frequency transducer, and high output: 128 dB peak. Its proprietary Beamwidth Matching Waveguide ensures signature Bose sound quality, delivering consistent frequency response, clarity, and projection across the coverage area — a remarkably powerful audio experience for both performers and audiences. The AMM108 is equally suited for a variety of medium-throw sound reinforcement, monitor, and fill applications in permanent or portable sound systems and offers outstanding vocal clarity and projection. The AMM108 features consistent voicing with Bose AM array modules and Bose AMU utility loudspeakers. So it’s easy to mix and match models from all three lines to create different types of systems.Key FeaturesCompact high-output design delivers 128 dB peak via shared-magnet coaxial driver: 1.7-inch compression driver and 8-inch low-frequency driverMultipurpose versatility for deployment as main, monitor, fill, or delay; extend system bandwidth to 35 Hz by pairingwith AMS115 subwooferConsistent tonality and voicing with Bose AM array modules and Bose AMU utility loudspeakers — easily create entiresystems and save substantial time during system configurationProprietary Beamwidth Matching Waveguide ensures signature Bose sound quality, aligning low and high beamwidththrough crossover region to deliver excellent tonal consistency across the coverage areaMulti-position enclosure with 110° ? 60° coverage angle — easily swap horizontal and vertical coverage by simplyrotating cabinet, no disassembly or tools requiredLightweight 13 kg (29 lb) cabinet with large, ergonomic handle and 35 mm pole stand adaptor for easy transportation and setupPair with Bose PowerMatch amps and ControlSpace DSP for best performance and loudspeaker protectionDeploy easily in permanent or portable applications with optional U-bracket, suspension bracket, Pan-and-tilt bracketfor RMU, or use the 6 integrated M10 inserts for custom suspensionCompanion AMS115 multipurpose subwoofer also available — 15-inch transducer, low frequency down to 35 Hz,130 dB peak output, 28 kg (63 lb) design with integrated M20 threaded pole mount and 12 M10 threaded inserts forsuspension in permanent installations

The Blackline X15 is a very high-power, passive two-way system designed for professional portable applications and installations that demand the ultimate in sonic performance from a single enclosure. With an accurately-defined 80° x 50° coverage pattern, it combines very high output capability with exceptional sonic performance and impact.Featuring a powerful 15” (380mm)/3” (75mm) voice coil LF drive unit, and a 1” (25mm) exit HF compression driver with a 1.75” (44mm) polyimide diaphragm for extended high frequency response.The X15 is constructed from plywood and fitted with a screw-free steel grille, M8 inserts for a wall bracket and eyebolt suspension, plus a pole-mount socket with a removable bung that maintains clean lines in install applications. Finished in black textured paint.A full-range passive two-way system, the X15 may be used without a controller. However, the EQ and limiter functions of a controller such as the Martin Audio DX0.5 will maximise its capabilities. When used in conjunction with an X115, X118 or X210 subwoofer, crossover and EQ functions can be performed by the DX0.5.FEATURESHigh power, passive two-way systemSymmetrical multi-angle plywood enclosureUser-rotatable 80° x 50° hornVertical and horizontal orientationScrew-free, cloth-backed perforated steel grilleIntegral ergonomic handlePole-mount bung maintains clean lines8Ω nominal impedanceTwin NL4 connectorsFlexible mounting options via M8 insertsAPPLICATIONSPortable sound reinforcementLive music clubsBars and restaurantsNightclubsUnobtrusive stage monitoringCorporate AV events and conferencesWeddings and partiesMain PA infillSecondary stages at festivalsHoW, leisure centres and retail outlets

The X10 is a high performance yet very compact two-way passive loudspeaker system which utilises a 10” (250mm)/2.5” (63mm) voice coil LF driver and a 1” (25mm) exit HF compression driver with a 1.4” (35mm) polyimide diaphragm. The rotatable 90° x 50° HF horn has equal horizontal and vertical mouth dimensions for directivity control in both planes.It has a multitude of professional applications — from distributed sound reinforcement, HoW and AV events to frontfill/infill and use as an unobtrusive stage monitor. With a maximum SPL of 124dB @ 1m, it is uniquely placed to meet the foreground requirements of music bars and clubs that require upfront sound levels from a very compact enclosure. Use with a BlacklineX Series subwoofer will enable the X10 to operate as small dancefloor or sound reinforcement system that is remarkably powerful for its size, as well as being extremely portable.The X10 is constructed from plywood and fitted with a screw-free steel grille, M8 inserts for wall brackets and eyebolt suspension, plus a pole-mount socket with a removable bung that maintains clean lines in install applications. Finished in black textured paint.A full-range passive two-way system, the X10 may be used without a controller. However, the EQ and limiter functions of a controller such as the Martin Audio DX0.5 will maximise its capabilities. When used in conjunction with an X115, X118 or X210 subwoofer, crossover and EQ functions can be performed by the DX0.5.FEATURESCompact passive two-way systemSymmetrical multi-angle plywood enclosureUser-rotatable 90° x 50° hornVertical and horizontal orientationScrew-free, cloth-backed perforated steel grilleIntegral ergonomic handlePole-mount bung maintains clean lines8Ω nominal impedanceTwin NL4 connectorsFlexible mounting options via M8 insertsAPPLICATIONSPortable sound reinforcementLive music clubsBars and restaurantsNightclubsUnobtrusive stage monitoringCorporate AV events and conferencesWeddings and partiesMain PA infillSecondary stages at festivalsHoW, leisure centres and retail outlets

DESCRIPTIONIdeal for medium-to-large rooms, the CDD15 is a very high-power, passive two-way system designed for installations that demand the ultimate in sonic performance from a single enclosure. It combines very high output capability with exceptional fidelity and coverage consistency. Its coaxial drive unit comprises a powerful 15” (380mm)/3” (75mm) voice coil LF driver and a 1.4” (35mm) exit HF compression driver with a 3” (75mm) pure titanium diaphragm.The Coaxial Differential Dispersion technology employed in the CDD15 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.The visually-distinctive birch plywood enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The CDD15 can be suspended by eyebolts or by means of an optional horizontal yoke.A full-range, passive two-way system, the CDD15 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURES High-output, CDD™ passive two-way system Coaxial Differential Dispersion™ technology Elegant birch plywood enclosure User-rotatable coaxial drive unit Vertical and horizontal mounting options Screw-free perforated steel grille 8Ω nominal impedance Integral inserts for eyebolt suspension Black or white standard colour optionsAPPLICATIONS Live Music Clubs and Bars Nightclubs Bars and Restaurants Museums and AV Spaces Convention Centres Hotels Retail Outlets Leisure Centres Houses of Worship

DESCRIPTIONIdeal for medium-to-large rooms, the CDD15 is a very high-power, passive two-way system designed for installations that demand the ultimate in sonic performance from a single enclosure. It combines very high output capability with exceptional fidelity and coverage consistency. Its coaxial drive unit comprises a powerful 15” (380mm)/3” (75mm) voice coil LF driver and a 1.4” (35mm) exit HF compression driver with a 3” (75mm) pure titanium diaphragm.The Coaxial Differential Dispersion technology employed in the CDD15 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.The visually-distinctive birch plywood enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The CDD15 can be suspended by eyebolts or by means of an optional horizontal yoke.A full-range, passive two-way system, the CDD15 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURES High-output, CDD™ passive two-way system Coaxial Differential Dispersion™ technology Elegant birch plywood enclosure User-rotatable coaxial drive unit Vertical and horizontal mounting options Screw-free perforated steel grille 8Ω nominal impedance Integral inserts for eyebolt suspension Black or white standard colour optionsAPPLICATIONS Live Music Clubs and Bars Nightclubs Bars and Restaurants Museums and AV Spaces Convention Centres Hotels Retail Outlets Leisure Centres Houses of Worship

DESCRIPTIONThe CDD12 is a compact, passive two-way system designed for installations that require high output levels. Its high-specification 12” (300mm) LF /1” exit HF Coaxial Differential Dispersion driver delivers perfect sound across the audience over medium-throw distances.The Coaxial Differential Dispersion technology employed in the CDD12 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.The LF driver has a 2.5” (65mm) voice coil and efficient motor with an aluminium demodulating ring to minimise distortion, while the HF driver utilises a 1.75” (44mm) polyimide diaphragm and features a low-compression phase-plug to reduce non-linearity.The visually-distinctive birch plywood enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the CDD12 allows it to be surface-mounted close to a wall via an optional wall bracket or suspended from a ceiling by eyebolts or a horizontal yoke option.A full-range, passive two-way system, the CDD12 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURESCompact, CDD™ passive two-way systemCoaxial Differential Dispersion™ technologyElegant birch plywood enclosureUser-rotatable coaxial drive unitVertical and horizontal mounting optionsScrew-free perforated steel grille8Ω nominal impedanceDiscreet mounting accessoriesIntegral inserts for eyebolt suspensionBlack or white standard colour optionsAPPLICATIONSLive Music Clubs and BarsNightclubsBars and RestaurantsMuseums and AV SpacesConvention CentresHotelsRetail OutletsLeisure CentresHouses of Worship

DESCRIPTIONThe CDD12 is a compact, passive two-way system designed for installations that require high output levels. Its high-specification 12” (300mm) LF /1” exit HF Coaxial Differential Dispersion driver delivers perfect sound across the audience over medium-throw distances.The Coaxial Differential Dispersion technology employed in the CDD12 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.The LF driver has a 2.5” (65mm) voice coil and efficient motor with an aluminium demodulating ring to minimise distortion, while the HF driver utilises a 1.75” (44mm) polyimide diaphragm and features a low-compression phase-plug to reduce non-linearity.The visually-distinctive birch plywood enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the CDD12 allows it to be surface-mounted close to a wall via an optional wall bracket or suspended from a ceiling by eyebolts or a horizontal yoke option.A full-range, passive two-way system, the CDD12 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURESCompact, CDD™ passive two-way systemCoaxial Differential Dispersion™ technologyElegant birch plywood enclosureUser-rotatable coaxial drive unitVertical and horizontal mounting optionsScrew-free perforated steel grille8Ω nominal impedanceDiscreet mounting accessoriesIntegral inserts for eyebolt suspensionBlack or white standard colour optionsAPPLICATIONSLive Music Clubs and BarsNightclubsBars and RestaurantsMuseums and AV SpacesConvention CentresHotelsRetail OutletsLeisure CentresHouses of Worship

DESCRIPTIONThe CDD10 is a very compact two-way passive loudspeaker system which utilises a 10” (250mm) LF/1” (25mm) exit HF Coaxial Differential Dispersion driver. It is uniquely placed to meet the foreground requirements of music bars and clubs, as well as the varied architectural applications that require upfront sound levels from a very compact enclosure. Use with a SX118 or CX218 subwoofer will enable the CDD10 to operate as small dancefloor system that is remarkably powerful for its size.The Coaxial Differential Dispersion technology employed in the CDD10 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.The visually-distinctive composite enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the CDD10 allows it to be surface-mounted close to a wall via an optional wall bracket or suspended from a ceiling by eyebolts or a horizontal yoke option.A full-range, passive two-way system, the CDD10 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURESCompact, CDD™ passive two-way systemCoaxial Differential Dispersion™ technologyElegant UPM Formi composite enclosureUser-rotatable coaxial drive unitVertical and horizontal mounting optionsScrew-free perforated steel grille8Ω nominal impedanceDiscreet mounting accessoriesIntegral inserts for eyebolt suspensionBlack or white standard colour optionsAPPLICATIONSLive Music Clubs and BarsNightclubsBars and RestaurantsMuseums and AV SpacesConvention CentresHotelsRetail OutletsLeisure CentresHouses of Worship

DESCRIPTIONThe CDD10 is a very compact two-way passive loudspeaker system which utilises a 10” (250mm) LF/1” (25mm) exit HF Coaxial Differential Dispersion driver. It is uniquely placed to meet the foreground requirements of music bars and clubs, as well as the varied architectural applications that require upfront sound levels from a very compact enclosure. Use with a SX118 or CX218 subwoofer will enable the CDD10 to operate as small dancefloor system that is remarkably powerful for its size.The Coaxial Differential Dispersion technology employed in the CDD10 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.The visually-distinctive composite enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the CDD10 allows it to be surface-mounted close to a wall via an optional wall bracket or suspended from a ceiling by eyebolts or a horizontal yoke option.A full-range, passive two-way system, the CDD10 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURESCompact, CDD™ passive two-way systemCoaxial Differential Dispersion™ technologyElegant UPM Formi composite enclosureUser-rotatable coaxial drive unitVertical and horizontal mounting optionsScrew-free perforated steel grille8Ω nominal impedanceDiscreet mounting accessoriesIntegral inserts for eyebolt suspensionBlack or white standard colour optionsAPPLICATIONSLive Music Clubs and BarsNightclubsBars and RestaurantsMuseums and AV SpacesConvention CentresHotelsRetail OutletsLeisure CentresHouses of Worship

DESCRIPTIONThe ultra-compact CDD6 is a two-way passive loudspeaker system designed to fulfil the requirement for full-frequency dynamic performance from a very small enclosure. Featuring a 6.5” (165mm) LF/1” (25mm) HF Coaxial Differential Dispersion driver, its extremely small size and sleek lines make it ideal for visibly-unobtrusive applications. It can also be used as a fill system in conjunction with larger CDD Series models and, with the addition of an SX subwoofer, can reproduce surprisingly high levels of music program.The Coaxial Differential Dispersion technology employed in the CDD6 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.The visually-distinctive enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the enclosure allows it to be surface-mounted close to a wall or ceiling by means of optional wall and ceiling brackets.A full-range, passive two-way system, the CDD6 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURESUltra-Compact, CDD™ passive two-way systemCoaxial Differential Dispersion™ technologyElegant UPM Formi composite enclosureUser-rotatable coaxial drive unitVertical and horizontal mounting optionsScrew-free perforated steel grille8Ω nominal impedanceDiscreet mounting accessoriesBlack or white standard colour optionsAPPLICATIONSBars and RestaurantsMuseums and AV SpacesConvention CentresHotelsRetail OutletsLeisure CentresHouses of Worship

DESCRIPTIONThe ultra-compact CDD6 is a two-way passive loudspeaker system designed to fulfil the requirement for full-frequency dynamic performance from a very small enclosure. Featuring a 6.5” (165mm) LF/1” (25mm) HF Coaxial Differential Dispersion driver, its extremely small size and sleek lines make it ideal for visibly-unobtrusive applications. It can also be used as a fill system in conjunction with larger CDD Series models and, with the addition of an SX subwoofer, can reproduce surprisingly high levels of music program.The Coaxial Differential Dispersion technology employed in the CDD6 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.The visually-distinctive enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the enclosure allows it to be surface-mounted close to a wall or ceiling by means of optional wall and ceiling brackets.A full-range, passive two-way system, the CDD6 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURESUltra-Compact, CDD™ passive two-way systemCoaxial Differential Dispersion™ technologyElegant UPM Formi composite enclosureUser-rotatable coaxial drive unitVertical and horizontal mounting optionsScrew-free perforated steel grille8Ω nominal impedanceDiscreet mounting accessoriesBlack or white standard colour optionsAPPLICATIONSBars and RestaurantsMuseums and AV SpacesConvention CentresHotelsRetail OutletsLeisure CentresHouses of Worship

DESCRIPTIONThe CDD5 is a two-way passive micro speaker designed for discreet positioning in architectural installations — including bars, museums, foyers, concourses, exhibition centres and HoW. It features a unique, patent protected 5” (125mm) LF/0.7” (19mm) HF Coaxial Differential Dispersion driver in a rigid ABS moulded enclosure and is supplied with a dedicated omni-directional mounting bracket.The Coaxial Differential Dispersion technology employed in the CDD5 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience to distribute sound evenly front-to-back, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response in the crossover region associated with non-coaxial designs.The visually-distinctive enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the enclosure allows it to be surface-mounted close to a wall or ceiling by means of the supplied omni-directional bracket or an optional close-mount ceiling bracket.The CDD5TX-WR option incorporates a 70V/100V line transformer.A full-range, passive two-way system, the CDD5 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURES: Ultra-Compact, CDD™ passive two-way systemCoaxial Differential Dispersion™ technologyElegant ABS moulded enclosureUser-rotatable coaxial drive unitVertical and horizontal mounting optionsScrew-free perforated steel grille8Ω nominal impedanceDiscreet mounting accessoriesBlack or white standard colour options70V/100V line transformer optionAPPLICATIONS:Bars and RestaurantsMuseums and AV SpacesConvention CentresHotelsRetail OutletsLeisure CentresHouses of Worship

DESCRIPTIONThe CDD5 is a two-way passive micro speaker designed for discreet positioning in architectural installations — including bars, museums, foyers, concourses, exhibition centres and HoW. It features a unique, patent protected 5” (125mm) LF/0.7” (19mm) HF Coaxial Differential Dispersion driver in a rigid ABS moulded enclosure and is supplied with a dedicated omni-directional mounting bracket.The Coaxial Differential Dispersion technology employed in the CDD5 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience to distribute sound evenly front-to-back, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response in the crossover region associated with non-coaxial designs.The visually-distinctive enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the enclosure allows it to be surface-mounted close to a wall or ceiling by means of the supplied omni-directional bracket or an optional close-mount ceiling bracket.The CDD5TX-WR option incorporates a 70V/100V line transformer.A full-range, passive two-way system, the CDD5 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURES: Ultra-Compact, CDD™ passive two-way systemCoaxial Differential Dispersion™ technologyElegant ABS moulded enclosureUser-rotatable coaxial drive unitVertical and horizontal mounting optionsScrew-free perforated steel grille8Ω nominal impedanceDiscreet mounting accessoriesBlack or white standard colour options70V/100V line transformer optionAPPLICATIONS:Bars and RestaurantsMuseums and AV SpacesConvention CentresHotelsRetail OutletsLeisure CentresHouses of Worship

DESCRIPTIONThe CDD8 is an ultra-compact two-way passive loudspeaker system with an integrated 8” (200mm) LF/1” (25mm) exit HF Coaxial Differential Dispersion driver which can be easily rotated for horizontal or vertical orientation depending on venue design requirements. Its small size gives no indication of its high output capability. As a stand-alone loudspeaker, it has a multitude of applications and can also be incorporated as an infill loudspeaker in distributed systems using larger CDD models, such as the CDD12 and CDD15.The Coaxial Differential Dispersion technology employed in the CDD8 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.The visually-distinctive enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the enclosure allows it to be surface-mounted close to a wall or ceiling by means of optional wall and ceiling brackets.A full-range, passive two-way system, the CDD8 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURES:Ultra-Compact, CDD™ passive two-way systemCoaxial Differential Dispersion™ technologyElegant UPM Formi composite enclosureUser-rotatable coaxial drive unitVertical and horizontal mounting optionsScrew-free perforated steel grille8Ω nominal impedanceDiscreet mounting accessoriesBlack or white standard colour optionsAPPLICATIONS: Live Music Clubs and BarsNightclubsBars and RestaurantsMuseums and AV SpacesConvention CentresHotelsRetail OutletsLeisure CentresHouses of Worship

DESCRIPTIONThe CDD8 is an ultra-compact two-way passive loudspeaker system with an integrated 8” (200mm) LF/1” (25mm) exit HF Coaxial Differential Dispersion driver which can be easily rotated for horizontal or vertical orientation depending on venue design requirements. Its small size gives no indication of its high output capability. As a stand-alone loudspeaker, it has a multitude of applications and can also be incorporated as an infill loudspeaker in distributed systems using larger CDD models, such as the CDD12 and CDD15.The Coaxial Differential Dispersion technology employed in the CDD8 delivers more consistent audience coverage than systems with fixed X° x Y° coverage patterns — projecting relatively more output to the rear of the audience, while having wide horizontal coverage close-up. Its innovative CDD driver achieves ‘point source’ summation of the LF and HF sections — eliminating off-axis variations in frequency response associated with non-coaxial designs. Improving on conventional coaxial designs, which can suffer from high-frequency beaming, the driver features a static waveguide that merges seamlessly with the unique cone shape — maintaining the dispersion pattern out to very high frequencies.The visually-distinctive enclosure can be used in either horizontal (landscape) or vertical (portrait) orientation, with rotation of the driver easily accomplished by removing the screw-free, protective grille. The curved shape of the enclosure allows it to be surface-mounted close to a wall or ceiling by means of optional wall and ceiling brackets.A full-range, passive two-way system, the CDD8 should be used with a compatible controller with appropriate limiter settings to provide system protection.When used with the DX4.0 controller or an iKON amplifier, there are now enhanced DSP and FIR based pre-sets to deliver the absolute maximum performance and fidelity while limiter settings protect the integrity of the system.FEATURES:Ultra-Compact, CDD™ passive two-way systemCoaxial Differential Dispersion™ technologyElegant UPM Formi composite enclosureUser-rotatable coaxial drive unitVertical and horizontal mounting optionsScrew-free perforated steel grille8Ω nominal impedanceDiscreet mounting accessoriesBlack or white standard colour optionsAPPLICATIONS: Live Music Clubs and BarsNightclubsBars and RestaurantsMuseums and AV SpacesConvention CentresHotelsRetail OutletsLeisure CentresHouses of Worship

The Blackline X8 is an ultra-compact passive two-way system with an 8” (200mm)/2” (50mm) voice coil LF driver and a 1” (25mm) HF driver mounted on a 90° x 50° horn which can be easily rotated for horizontal or vertical orientation, depending on venue requirements. Its very small size gives no indication of its high output capability.FeaturesUltra-Compact passive two-way systemSymmetrical multi-angle plywood enclosureUser-rotatable 90° x 50° hornVertical and horizontal orientationScrew-free, cloth-backed perforated steel grilleIntegral ergonomic handlePole-mount bung maintains clean lines8Ω nominal impedanceTwin NL4 connectorsFlexible mounting options via M8 inserts

The Blackline X12 fulfils the requirement for a compact system that can deliver high sound levels — either as a stand-alone system or sup-plemented by a BlacklineX subwoofer. Featuring a 12” (300mm) LF driver unit and a 1” (25mm) exit compression driver on a user-rotatable horn, its 80° x 50° dispersion pattern is ideal for medium throw applications.FeaturesCompact passive two-way systemSymmetrical multi-angle plywood enclosureUser-rotatable 80° x 50° hornVertical and horizontal orientationScrew-free, cloth-backed perforated steel grilleIntegral ergonomic handlePole-mount bung maintains clean lines8Ω nominal impedanceTwin NL4 connectorsFlexible mounting options via M8 inserts

Παθητικό ηχείο 2 δρόμων 15" με 1,35" tweeter, 500W program @8Ω, Απόκριση συχνοτήτων: 50Hz - 20 kHz, Max S.P.L: 123dB. Ευαισθησία: 96dB. Διαστάσεις (WxHxD): 470 x 390 x 700 mm. Βάρος 19 kg.Χαρακτηριστικά:Speaker Type: Passive/ΠαθητικόImpedance: OhmLow Speaker Size: 15"Freq From (Hz): 50Freq Up to (Hz): 20000Shell Material: Plastic/SyntheticPower Rating Continuous Watt/Ohm: 500Max SPL Output (dB): 123Nominal Impedance (Ohms): 8Μήνες Εγγύησης: 12Depth (cm): 39.0Height (cm): 70.0Βάρος (Kg): 19.0High Speaker Size: 0.5"Κατάλογος: ΕπαγγελματικάSpeaker System: Two WayWidth (cm): 47.0Color: Black/Μαύρο

Able to handle 2,400 watts peak as a stand-alone cabinet, this ultra efficient 15″/1″ fullrange mid/ high unit is the loudest reference speaker in its class. Like the L5 FA 112 F, it features an asymmetrical horn with an optimized the coverage pattern that is wider up front and grows more directed with distance, thereby achieving greater range. Specifications: Application: Mid/High unit, Stand Alone System, DJ-Monitoring Powerhandling(Continuous): 600 Watt (2400W Peak) 15″ Speaker with 3″ voice coil 1″ Driver with 1,75″ voice coil 139 dB Max SPL Peak @ 10% THD (halfspace) Asymmetrical horn (60°-90° x 55°), rotatable Rugged hybrid (birch multiplex /MDF) housing EQ switch (Flat / Contour)

Able to handle 1,000 watts as a stand-alone cabinet, this ultra efficient 15″/1″ fullrange mid/ high unit is the loudest reference speaker in its class. Like the L5 FA 112, it features an asymmetrical horn with an optimized the coverage pattern that is wider up front and grows more directed with distance, thereby achieving greater range. Specifications: Application: Mid/High unit, Stand Alone System, DJ-Monitoring 1000 Watt Class-D (650 W + 350 W, biamped) 15″ Speaker with 3″ voice coil 1″ Driver with 1,75″ voice coil 137 dB Max SPL Peak @ 10% THD (halfspace) Asymmetrical horn (60°-90° x 55°), rotatable Rugged hybrid (birch multiplex /MDF) housing 2 separate Inputs EQ switch (High Power/Small Venue)

The E115 is a trapezoidal, two-way loudspeaker using a 15-inch, 500W, die cast aluminum frame woofer with a 3.5-inch voice coil. It is intended for use when high-power and authoritative low-end are needed from a full-range loudspeaker. A 2.8” compression driver attached to the 75° DMTTM waveguide assures that even distant listeners will be well covered. E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.  Features: High output, professional quality sound with E115 – 500 W continuous power E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers. E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers: For PLD/CXD visit Amplifier Navigator Software.For GXD visit the GXD Firmware Updater Titanium diaphragm for high fidelity and long life Rugged tour-grade textured paint Foam-lined perforated steel grill Available U-Style Yoke and M10 rigging kit for permanent installation Dual angle pole socket Model: E115 Configuration: 1 x 15-inch, 2-way, non-powered  Frequency Response: (-6 dB) 55 Hz – 20 kHz Frequency Range: (-10 dB) 43 Hz – 20 kHz Power capacity1: continuous/peak 500 W / 2000 W Sensitivity: 97 dB, 1 W @ 1 m Coverage Angle: 75° conical DMT Output2 (peak SPL @ 1 m): 130 dB Drivers: LF: 381 mm (15-inch) driver with 89 mm (3.5-inch) voice coil. HF: 38 mm (1.5-inch) exit, 71 mm (2.8-inch) voice coil, compression driver  Specifications: Nominal Impedance: 8Ω Cross-over: Full-range only 1.55 kHz  Input connectors : 2 x NL4, 1 x barrier strip Enclosure: Trapezoidal, plywood, black texture paint finish. Two side-mounted handles, Perforated, powder-coated steel grille with foam lining. Dimensions: 16.5 x 28.2 x 17.5 in (WxHxD): 420 x 716 x 445 mm Net weight: 31 kg / 68 lb Shipping weight: 34 kg / 75 lb

The E112 is a trapezoidal, two-way loudspeaker using a 12-inch die cast aluminum woofer with a 3-inch voice-coil. The 15mm, 11-ply enclosure provides enough volume to deliver solid low-frequency extension down to 65 Hz making it an excellent choice for applications in which space or budget preclude the use of a subwoofer. The DMT coverage angle of 85° is ideal for most medium and medium-long throw applications. E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available.Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance.When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.  Features: High output, professional quality sound with 400 W continuous power E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers. E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers: For PLD/CXD visit Amplifier Navigator Software. For GXD visit the GXD Firmware Updater Rugged tour-grade textured paint Foam-lined perforated steel grill Available U-Style Yoke and M10 rigging kit for permanent installation Dual angle pole socket Model: E112 Configuration: 1 x 12-inch, 2-way, non-powered Frequency Response: (-6 dB) 64 Hz – 20 kHz Frequency Range: (-10 dB) 46 Hz – 20 kHz Power capacity1: continuous/peak: 400 W / 1600 W Sensitivity: 96 dB, 1 W @ 1 m Coverage Angle: 85° conical DMT Output2 (peak SPL @ 1m): 128 dB Drivers: LF: 305 mm (12-inch) driver with 76 mm (3-inch) voice coil. HF: 25 mm (1-inch) exit, 45 mm (1.75-inch) voice coil, compression driver  Specifications: Nominal Impedance: 8Ω Cross-over: Full range only, 1.8 kHz Input Connections: 2 x NL4, 1 x barrier strip Enclosure: Trapezoidal, plywood, black texture paint finish. Two side-mounted handles. Perforated, powder-coated steel grille with foam lining. Dimensions: 14.2 x 24.2 x 14.6 in (WxHxD): 360 x 616 x 371 mm Net Weight: 23 kg / 51 lb Shipping Weight: 26 kg / 57.5 lb

QSC E110 Παθητικό ηχείο 10" Χαρακτηριστικά: Frequency Response (-6 dB): 68 Hz – 20 kHz Frequency Range (-10 dB): 50 Hz - 20 kHz Ισχύς: 300 W (RMS) / 1200 W (PEAK) Sensitivity: 95 dB, 1 W @ 1 m Coverage Angle: 85° conical DMT SPL @ 1M: 126 dB Drivers: LF 254 mm (10-inch) driver with 64 mm (2.5-inch) voice coil;              HF 25 mm (1-inch) exit, 45 mm (1.75-inch) voice coil, compression driver Αντίσταση: 8 Ω Cross-ove: Full-range only, 1.8 kHz Είδοσοι: 2 x NL4 1 x barrier strip Καμπίνα: Multi-angle, plywood, black texture paint finish. One top mounted handle. Perforated, powder-coated steel grille with foam lining Mounting: 9 x M8 suspension points, dual angle, 35 mm pole-socket Βάρος: 20 kg Διαστάσεις: 330x560x330 mm

Χαρακτηριστικά:Παθητική δύο δρόμων ενίσχυση12 βαρέως τύπου Woofer14Ti οδηγός συμπίεσης, με 1.4" διάφραγμα τιτανίου300 W ισχύς κανονικής λειτουργίας ανάλογα με τον τρόπο χειρισμού60 X 45 κόρνα ημιεκθετικής μορφής Διαμορφωμένη θέση εισαγωγής στήλου  για στήλο διαμέτρου 3/8"Δύο NL-4 με κλείδωμα περιστροφής jacks εν παραλλήλωHeavy-duty διάτρητη ατσάλινη σχάρα, με μικρές προεξοχές (σκόνη) προστασίας άκτρωνΠροσάρτηση πλαστικού μεγάλης διάρκειας ζωής (Durable plastic injection-molded enclosure)

Παθητικό ηχείο 2 δρόμων, τύπου bass reflex, 15" woofer + 3" HF driver με μαγνήτη νεοδυμίου. Ισχύ 800W RMS, 1600W program, 3200W peak, 8 Ωhm, max SPL 136dB, απόκριση συχνότητας 56Hz- 20kHz (-3 dB), διασπορά 90° x 50°. Στιβαρή κατασκευή από 18mm plywood και duraflex επένδυση, διαθέτει 3 χερούλια μεταφοράς, 12 σημεία στήριξης Μ10, υποδοχή 36mm για τρίποδα και ειδικά πόδια για χρήση ως μόνιτορ (γωνία 50°). Input και loop thru NL4 neutrik connectors. Ιδανικό για εταιρίες ενοικιάσεως ήχου, DJ sets, μόνιμες εγκαταστάσεις. Διαστάσεις 691 x 458x 478 (Υ x Π x Β), βάρος 25.9 kg, χρώμα μαύρο.Χαρακτηριστικά:Δυνατότητα Σύνδεσης με Bluetooth: NoImpedance: OhmEN54-24 Certified: NoLow Speaker Size: 12"Freq From (Hz): 57Freq Up to (Hz): 20000Shell Material: Birch-PlywoodPower Rating Continuous Watt/Ohm: 1600Max SPL Output (dB): 135Coverage Pattern: 90 X 50Nominal Impedance (Ohms): 8Speaker Type: Passive/ΠαθητικόSpeaker System: Two WayWidth (cm): 41.5Depth (cm): 42.9Height (cm): 63.8Βάρος (Kg): 24.9

Ηχείο 2 δρόμων, 500W, 12'', 8Ω, 94dB.Χαρακτηριστικά:Speaker System: Two WayImpedance: OhmLow Speaker Size: 12"Freq From (Hz): 63Freq Up to (Hz): 20000Shell Material: MdfPower Rating Continuous Watt/Ohm: 500Max SPL Output (dB): 121Nominal Impedance (Ohms): 8Speaker Type: Passive/ΠαθητικόWidth (cm): 42.0Μήνες Εγγύησης: 12Depth (cm): 42.0Height (cm): 66.0Βάρος (Kg): 22.0High Speaker Size: 1.34"Color: Black/Μαύρο

Ηχείο 2 δρόμων, 800W, 15'', 8Ω, 96dB. Χαρακτηριστικά:Speaker Type: Passive/ΠαθητικόLow Speaker Size: 10"Freq From (Hz): 60Freq Up to (Hz): 20000Shell Material: Plastic/SyntheticImpedance: OhmPower Rating Continuous Watt/Ohm: 300Max SPL Output (dB): 119Nominal Impedance (Ohms): 8Speaker System: Two WayWidth (cm): 35.5Depth (cm): 29.0Height (cm): 52.0Βάρος (Kg): 10.0High Speaker Size: 1"Color: Black/ΜαύροΜήνες Εγγύησης: 12

Παθητικό ηχείο 2 δρόμων 250W RMS @ 8ohm, 10"+1" driver με διαφραγμα titanium. Απόκριση συχνόνητας: 60 Hz -20 kHz, ευαισθησία εισόδου: 94dB, Max. SPL: 119dB, connectors: 2 XLN4. Διαστάσεις: (WxHxD) 515 x 375 x 325 mm. Βάρος: 5.8 kg.Χαρακτηριστικά:Speaker Type: Passive/ΠαθητικόSpeaker System: Two WayImpedance: OhmLow Speaker Size: 10"Freq From (Hz): 60Freq Up to (Hz): 20000Shell Material: Plastic/SyntheticPower Rating Continuous Watt/Ohm: 200Max SPL Output (dB): 119Nominal Impedance (Ohms): 8Width (cm): 37.5Depth (cm): 32.5Height (cm): 51.5Βάρος (Kg): 5.8High Speaker Size: 1"Color: Black/ΜαύροΜήνες Εγγύησης: 12

Αυτοενισχυόμενο Ξύλινο ενεργό ηχείο δύο δρόμων με woofer 15" και driver 1.75", ισχύς ενισχυτή: 300WRMS, Απόκριση συχνοτήτων: 55Hz - 20 kHz, Ευαισθησία: 94dB, Max SPL: 124dB, XLR in/out. Διαστάσεις (WxHxD): 520x 510 x 820 mm. Βάρος 35 kg.Χαρακτηριστικά:Speaker Type: ActiveImpedance: OhmLow Speaker Size: 12"Freq From (Hz): 55Freq Up to (Hz): 20000Shell Material: MdfPower Rating Continuous Watt/Ohm: 500Max SPL Output (dB): 124Nominal Impedance (Ohms): 8Μήνες Εγγύησης: 12Depth (cm): 42.0Height (cm): 66.0Βάρος (Kg): 22.0High Speaker Size: 1,75"Speaker System: Two WayWidth (cm): 42.0Color: Black/Μαύρο

Παθητικό ηχείο 2 δρόμων 10" με 1" tweeter, 300W program @8Ω, Απόκριση συχνοτήτων: 55Hz - 20 kHz, Max S.P.L: 121dB. Ευαισθησία: 95dB. Διαστάσεις (WxHxD): 355 x 290 x 520mm. Βάρος 10 kg.Χαρακτηριστικά:Speaker Type: Passive/ΠαθητικόImpedance: OhmLow Speaker Size: 10"Freq From (Hz): 60Freq Up to (Hz): 20000Shell Material: Plastic/SyntheticPower Rating Continuous Watt/Ohm: 300Max SPL Output (dB): 119Nominal Impedance (Ohms): 8Μήνες Εγγύησης: 12Depth (cm): 29.0Height (cm): 52.0Βάρος (Kg): 10.0High Speaker Size: 1"Speaker System: Two WayWidth (cm): 35.5Color: Black/Μαύρο

Παθητικό ηχείο 2 δρόμων 400W, 12" +1" driver με διάφραγμα τιτανίου, 150W (RMS), 300W (AES)@8Ω. Απόκριση σύχνοτητας: 55Hz - 20KHz, ευαισθησία εισόδου: 95dB, max SPL: 121dB, διαστάσεις: (W x H x D) 603 x 405 x 330 mm,  Βάρος 9.5kg.Χαρακτηριστικά:Speaker Type: Passive/ΠαθητικόImpedance: OhmLow Speaker Size: 12"Freq From (Hz): 55Freq Up to (Hz): 20000Shell Material: Plastic/SyntheticPower Rating Continuous Watt/Ohm: 150Max SPL Output (dB): 121Nominal Impedance (Ohms): 8Μήνες Εγγύησης: 12Depth (cm): 33.0Height (cm): 60.3Βάρος (Kg): 9.5High Speaker Size: 1"Speaker System: Two WayWidth (cm): 40.5Color: Black/Μαύρο

Παθητικό ηχείο 2 δρόμων 300W RMS @8ohm, 15"+1", driver με διάφραγμα titanium. Απόκριση συχνότητας.: 55 Hz-20kHz, ευαισθησία εισόδου: 96dB, Max.SPL: 124dB, Connectors: 2 XLN4. Διαστάσεις: (W x H x D) 720 x 467 x 380 mm. Βάρος: 13 kg. Χαρακτηριστικά:Speaker Type: Passive/ΠαθητικόImpedance: OhmLow Speaker Size: 10"Freq From (Hz): 60Freq Up to (Hz): 20000Shell Material: Plastic/SyntheticPower Rating Continuous Watt/Ohm: 300Max SPL Output (dB): 119Nominal Impedance (Ohms): 8Speaker System: Two WayWidth (cm): 35.5Depth (cm): 29.0Height (cm): 52.0Βάρος (Kg): 10.0High Speaker Size: 1"Color: Black/ΜαύροΜήνες Εγγύησης: 12

Ηχείο με 8” LF driver (Lavoce) με 1,8" Voice Coil & 1" HF Compression Driver με 1,35" Voice Coil, 250W RMS, 1000W Peak, εμπέδηση 8Ω, ευαισθησία 97dB, max SPL 115dB, απόκριση συχνότητας 61Hz-19kHz. Διασπορά 90ο x 60ο. Διαθέτει 2 εισόδους Speakon. Διαστάσεις (H x W xD) 485 x 267 x 271 mm. Βάρος 7,4 kg.Κατάλληλο για εγκαταστάσεις όπως καφέ, μπαρ και χώρους μαζικής εστίασης.Χαρακτηριστικά:Απόκριση συχνότητας: 61Hz-19kHzΙσχύς RMS/Program: 250W/500WΙσχύς Peak: 1000WΕυαισθησία(1m/1W): 97dBMax SPL: 115dBΔιασπορά: 90ο x 60oTransducers: 8" LF Driver by Lavoce (1,8" Voice Coil), 1" HF Compression Driver (1,35" Voice Coil)Είσοδοι: 2 x SpeakonΔιαστάσεις (H x W xD): 485 x 267 x 271 mmΒάρος: 7.4kg​

Aυτοενισχυόμενο ηχείο F.O.H./stage monitor 2 δρόμων με έλεγχο μέσω Wi-Fi, με δύο ενισχυτές Crown class D 1500W, (2 X 750W). 12" woofer & 1.5" driver, διασπορά 90° x 50°, απόκριση σε main mode 52,6Hz - 20 kHz (± 3dB), και σε monitor mode 50,3 Hz - 20 kHz (±3 dB), με max SPL 135dB peak. Δύο εισόδους balanced xlr (combo) και δύο unbalanced rca, με ξεχωριστά ρυθμιστικά gain εισόδου και δυνατότητα επιλογής ή μίξης των δύο. Δύο επιλεγόμενες ρυθμίσεις EQ, επιπλέον ρυθμίσεις EQ μέσω Wi-FI και του προγράμματος PRX Connect, μία έξοδο thru με switch επιλογής καναλιού εισόδου ή μίξης των δύο, DSP limiter κύκλωμα προστασίας εισόδου.Ξύλινη καμπίνα με επένδυση ειδικής βαφής DuraFlex για μεγαλύτερη αντοχή, υποδοχή τριπόδου διπλής κλίσης και δυνατότητα κρέμασης. Ιδανικά για D.j. sets, μικρά p.a. και μόνιμες εγκαταστάσεις. Χαρακτηριστικά:Δυνατότητα Σύνδεσης με Bluetooth: YesImpedance: OhmLow Speaker Size: 12"Freq From (Hz): 50Freq Up to (Hz): 20000Shell Material: Birch-PlywoodΠοσότητα Παραγγελίας: 1Power Rating Continuous Watt/Ohm: 750Max SPL Output (dB): 135Coverage Pattern: 90x50Speaker Type: Active/ΕνεργόΚατάλογος: ΕπαγγελματικάSpeaker System: Two WayWidth (cm): 38.5Color: Black/ΜαύροDepth (cm): 34.1High (cm): 59.9Βάρος (Kg): 19.4High Speaker Size: 1.5" 

Επαγγελματικό Ηχείο 2 δρόμων με woofer 10” και 1.0’’ Compression Driver, πλαστικής καμπίνας, με ισχύ 250W RMS, 1000W Max, εμπέδηση 8Ω, ευαισθησία 93dB, max SPL 117dB, απόκριση συχνότητας 58Hz-19KHz. Με εξαιρετικά ελαφριά κατασκευή. Κατάλληλα για party, floor monitor, mobile DJing, εκδηλώσεις κλπ.Χαρακτηριστικά:Απόκριση συχνότητας: 58Hz-19kHzΙσχύς RMs/Program: 250W/500WΙσχύς Peak: 1000WΕυαισθησία(1m/1W): 93dBMax SPL: 117dBΔιασπορά: 90ο x 60oTransducers: 10" LF Driver, 1" HF Driver, 1,35" πηνίο φωνήςΕίσοδοι: 2 x SpeakonΔιαστάσεις: 357 x 593 x 365Βάρος: 10,4kg

Επαγγελματικό Ηχείο 2 δρόμων, πλαστικής καμπίνας σε μαύρο χρώμα με ισχύ 200 watt RMS, 800 Watt Max, woofer 15” και 1’’ Compression Driver, απόκριση συχνότητας 45 Hz - 20 kHz (-10dB), συχνότητα Crossover 2.5kHz, ευαισθησία 97dB, max SPL 122dB. Με διασπορά 90ο x 60ο. Ιδανικό για καφέ, μπαρ και DJ.Χαρακτηριστικά:Iσχύς: 200 watt RMS, 800 watt MaxΑπόκριση συχνότητας: 45 Hz - 20 kHz (-10dB).Ευαισθησία: 97dBMax SPL: 122dBΣυχνότητα Crossover: 2.5 kHzΔιασπορά: 90ο x 60οWoofer 15" (2” Voice Coil), HF compression driver 1"Αντίσταση: 8 OhmΕίσοδοι: 2 x SpeakonΔιαστάσεις: 480 x 740 x 395 mmΒάρος: 13 kg

Επαγγελματικό Ηχείο 2 δρόμων, πλαστικής καμπίνας σε μαύρο χρώμα με ισχύ 80 watt RMS, 320 Watt Max, woofer 8” και 1.0’’ Compression Driver, απόκριση συχνότητας 75 Hz - 20 kHz (-10dB), συχνότητα Crossover 3.5kHz, ευαισθησία 92dB, max SPL 111dB. Με διασπορά 90ο x 60ο. Ιδανικό για καφέ, μπαρ και DJ.Χαρακτηριστικά:Ισχύς: 80 watt RMS, 320 watt MaxΑπόκριση συχνότητας: 75 Hz - 20 kHz (-10dB).Ευαισθησία: 92 dBMax SPL: 111 dBΣυχνότητα Crossover: 3.5kHzΔιασπορά: 90ο x 60οWoofer 8" (1.5” Voice Coil), HF compression driver 1"Αντίσταση: 8 OhmΕίσοδοι: 2 x SpeakonΔιαστάσεις: 230 x 438 x 245 mmΒάρος: 5.5 kg

Επαγγελματικό Ηχείο 2 δρόμων, πλαστικής καμπίνας σε μαύρο χρώμα με ισχύ 120 watt RMS, 480 Watt Max, woofer 10” και 1’’ Compression Driver, απόκριση συχνότητας 65 Hz - 20 kHz (-10dB), συχνότητα Crossover 3.0kHz, ευαισθησία 94dB, max SPL 115dB. Με διασπορά 90ο x 60ο. Ιδανικό για καφέ, μπαρ και DJ.Χαρακτηριστικά:Ισχύς: 120 watt RMS, 480 watt MaxΑπόκριση συχνότητας: 65Hz-20KHz (-10dB)Ευαισθησία: 94 dBMax SPL: 115 dBΣυχνότητα Crossover: 3.0kHzΔιασπορά: 90ο x 60οWoofer 10" (1.5” Voice Coil), HF compression driver 1"Αντίσταση: 8 OhmΕίσοδοι: 2 x SpeakonΔιαστάσεις: 360 x 545x 295 mmΒάρος: 7,3 kg

Επαγγελματικό Ηχείο 2 δρόμων, πλαστικής καμπίνας σε μαύρο χρώμα με ισχύ 150 watt RMS, 600 Watt Max, woofer 12” και 1’’ Compression Driver, απόκριση συχνότητας 50 Hz - 20 kHz (-10dB), συχνότητα Crossover 2.8kHz, ευαισθησία 96dB, max SPL 120dB. Με διασπορά 90ο x 60ο. Ιδανικό για καφέ, μπαρ και DJ.Χαρακτηριστικά:Ισχύς: 150 watt RMS, 600 watt MaxΑπόκριση συχνότητας: 50 Hz - 20 kHz (-10dB).Ευαισθησία: 96 dBMax SPL: 120 dBΣυχνότητα Crossover: 2.8kHzΔιασπορά: 90ο x 60οWoofer 12" (1.5” Voice Coil), HF compression driver 1"Αντίσταση: 8 OhmΕίσοδοι: 2 x SpeakonΔιαστάσεις: 420 x 630 x 342 mmΒάρος: 10 kg  

Ηχείο δύο δρόμων με ξύλινη καμπίνα,ισχύος 350W RMS/8Ω με woofer 12" και κόρνα 1,5" (διασπορά 90 X 60), απόκριση συχνότητας 55-20000Hz, ευαισθησία 95dB / W /m (131dB max). Είσοδοι με βύσματα speakon, βάρος 17,4kg, σε μαύρο χρώμα. Διαθέτει φωλιά για βάση στήριξης.Χαρακτηριστικά:Μοντέλο: ΕΚΧ-12Τύπος Ηχείου: ΠαθητικόΚατηγορία Ηχείου    Δορυφόροι (full range), Floor MonitorΥλικό Κατασκευής: Ξύλινη ΚαμπίναΣυνολική Ισχύς (Watt): 350Αντίσταση (Ω): 8ΩΔιάμετρος Woofer (inches): 12Tweeter / Driver (inches): 1dB (max spl): 131Ευαισθησία (1W/1m): 95Απόκριση συχνοτήτας (Hz): 55-20000Βάρος (kg): 17,4Application: Installation, Portable PAΕγγύηση: 5 Χρόνια

Ηχείο δύο δρόμων με ξύλινη καμπίνα,ισχύος 400W RMS/8Ω με woofer 15" και κόρνα 1,5" (διασπορά 90 X 60), απόκριση συχνότητας 50-20000Hz, ευαισθησία 96dB / W /m (132dB max). Είσοδοι με βύσματα speakon, βάρος 23,2kg, σε μαύρο χρώμα. Διαθέτει φωλιά για βάση στήριξης.Χαρακτηριστικά:Μοντέλο: ΕΚΧ-15Τύπος Ηχείου: ΠαθητικόΚατηγορία Ηχείου:  Δορυφόροι (full range), Floor MonitorΥλικό Κατασκευής: Ξύλινη ΚαμπίναΣυνολική Ισχύς (Watt): 400 W/1600 W Αντίσταση (Ω): 8ΩΔιάμετρος Woofer (inches): 15Tweeter / Driver (inches): 1.5dB (max spl): 132Ευαισθησία (1W/1m): 95Απόκριση συχνοτήτας (Hz): 55-20000Βάρος (kg): 23.2Application: Installation, Portable PAΕγγύηση: 5 Χρόνια