Θα σας ειδοποιήσουμε αμέσως μόλις το προϊόν υπάρχει σε stock στην αποθήκη μας! Η εκτέλεση των παραγγελιών θα γίνει με σειρά προτεραιότητας και δεν εγγυούμαστε ότι η τιμή θα παραμείνει η ίδια.
-
Δωρεάν Μεταφορικά
-
24
ΆτοκεςΔόσεις
-
2 Έτη Εγγύηση
-
Δωρεάν Μεταφορικά
-
24
ΆτοκεςΔόσεις
-
2 Έτη Εγγύηση
Διαβάστε τον οδηγό αγοράς για Ηχεία
A more compact floorstander, the Gold 200 nevertheless delivers full-scale performance. Its three-way design features two 6½" (165 mm) RDT II bass drivers beneath a 2½" (64 mm) C-CAM mid-range driver with a MPD high-frequency transducer module, backed up by dual rear-firing HiVe II ports.
All but the largest rooms will benefit from Gold 200’s remarkably tight and textured bass response, deftly informative mid-range and smooth high-frequency attack. Regardless of volume or your listening position, Gold 200’s powers of communication will move you.
Key Features
- MPD high-frequency transducer – articulate, extended high frequencies, yet supremely smooth
- Dual 61/2" bespoke bass drivers, featuring:
- – RDT II Cone technology – specially developed Sandwich cone technology using thin C-CAM, Nomex honeycomb core and woven carbon fibre back skin to return incredible stiffness, yet light and well damped
- – DCF (Dynamic Coupling Filter) – optimised to reduce high frequency cone break-up and further reduce distortion
- Dual HiVe II ports – improved transient response and tighter bass, due to smoother air-flow
- Pureflow silver-plated OFC copper internal cabling – highest quality transfer through the signal chain
- Soft touch top trim – giving a luxurious, premium quality furniture grade touch and appearance
- Single-bolt-through driver technology – providing increased bracing strength, rigidity and driver/baffle de-coupling
- Bespoke magnetic grilles – clean visual styling, virtually acoustically transparent
- Sturdy cast metal out-rigger feet with spike or rubber foot for carpet or hard flooring – provides more attractive appearance and takes up less floor space
- System Format: 3-way
- Frequency Response (-6 dB): 35 Hz – 50 kHz
- Sensitivity (1W@1M): 88 dB
- Nominal Impedance: 4 Ohms
- Minimum Impedance: 3.4 Ohms @ 1 kHz
- Maximum SPL: 114 dBA (Pair)
- Power Handling (RMS): 200 W
- Recommended Amplifier Requirements: 80 – 200 W
- Bass Alignment: Bass Reflex Dual HiVe II port system
- Crossover Frequency: L.F/ M.F: 650 Hz M.F/ H.F: 3.5 kHz
- Drive Unit Complement: 2 x 61/2" RDT II long-throw bass driver 1 x 21/2" C-CAM mid-range driver 1 x MPD high-frequency transducer
- External Dimensions (Including Grille and Terminals (H x W x D)): 950 x 195 x 330.6 mm (373/8 x 711/16 x 13")
- External Dimensions (including Outrigger Feet and Spikes (H x W x D)): 997 x 282.8 x 387.8 mm (391/4 x 111/8 x 151/4")
- Weight (each):
- 21.86 kg (48 lb 2 oz)
- Sold As: Pair
Πως βαθμολογείτε αυτό το προϊόν;
Ειδοποίηση Αποθέματος