Θα σας ειδοποιήσουμε αμέσως μόλις το προϊόν υπάρχει σε stock στην αποθήκη μας! Η εκτέλεση των παραγγελιών θα γίνει με σειρά προτεραιότητας και δεν εγγυούμαστε ότι η τιμή θα παραμείνει η ίδια.
-
Δωρεάν Μεταφορικά
-
36 Δόσεις
-
2 Έτη Εγγύηση
-
Δωρεάν Μεταφορικά
-
36 Δόσεις
-
2 Έτη Εγγύηση
Borrowing the same award-winning microphone preamplifiers found on their 744T digital portable interface, the Sound Devices USBPre 2 provides one of the highest quality portable interfaces available for both Mac and Windows computers.
The USBPre 2 is equipped with a pair of fully discrete, transistor-based XLR inputs and impressively lucid 24-bit converters that are capable of up to 192kHz sample rates.
Additional inputs for line-level sources and consumer audio electronics, as well as S/PDIF optical Toslink digital devices are also available. A 23-segment, multicolor LED meter provides you with the essential feedback you need to keep an eye on your levels, and are an invaluable asset when using the USBPre 2 as a standalone preamp and A-to-D converter.
Χαρακτηριστικά:
- Extended bandwidth, low-noise microphone preamplifiers with 48 V phantom, limiters, highpass filters, and 15dB pad
- Dynamic range greater than 114dB (in 24-bit operation)
- Flat 10Hz to 40kHz (@96kHz SR) audio bandwidth with very low distortion
- Each input individually selectable between microphone, line, and aux level signals (both channels selected simultaneously for S/PDIF connections)
- Precision, 23-segment, multicolor LED peak/VU meter, selectable between input and output sources
- High-output headphone amplifier can drive a wide range of headphones
- Balanced outputs on XLR connectors with dedicated level control can be used to drive line- or mic-level inputs
- Mix control enables zero-delay monitoring of source audio, computer audio, or a mix of both source and computer audio for multitrack recording or computer telephony
- Phono (RCA) jacks connect Aux Output to external loudspeakers or preamplifiers
- Bus powering via USB for convenient, single-cable connection to the computer
- In Stand-Alone mode the USBPre 2 operates as a microphone preamplifier and analog-to-digital converter
- Hardware loop-through for test & measurement to send computer audio directly back to an input
- High-strength extruded aluminum chassis
- Mac OS X 10.4+, Windows XP/Vista/7, and Linux, class-compliant audio device
- Additional features controlled by hardware DIP switches on the back panel
Πως βαθμολογείτε αυτό το προϊόν;
Ειδοποίηση Αποθέματος