Early Black Friday

Ένα μικρό ηχείο με ιδιαίτερα καλό ήχο για την κατηγορία και το μέγεθος του. Hi-Fi σε πολύ λογική τιμή ! 2-way bass reflex system Max. power 60W Max. power 90W Frequency range +/- 4 dB 60-22.000Hz Impedance 4-8 Ohm 25 mm soft dome tweeter Woofer 130 mm, shielded Dimensions (HxWxD) 245 x 155 x 195mm Weight 3.2Kg Calvados finish, Light beech, Black and white

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter. This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style. With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 36 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 110 Recommended Amplifier Power [W]: 30 - 180 Crossover Frequency [Hz]: 2,300 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 39.5 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Floor Recommended Distance From Wall [cm]: 20 - 80 Dimensions With Base (HxWxD) [mm]: 1015 x 200 x 340 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 14.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 5 is the ultimate performer. A compact and elegant floor-standing speaker, housing 2 x 5¼” wood fibre SMC based woofers and the series’ wide bandwidth 29 mm ultra-lightweight soft dome tweeter. This slim floor-stander will surprise with its ability to deliver a deep firm bass. Together with the clear and well defined mid-range and the airy high frequencies, this speaker is at home with any music or movie sound track. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. We have made it easy to integrate the OBERON 5 into any room, as both the driver materials and geometry applied have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 39 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 88 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 30 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 2 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 43 Connection Input: Single Wire Magnetic Shielding Recommended Placement Floor Recommended Distance From Wall [cm]: 15 - 80 Dimensions With Base (HxWxD) [mm]: 830 x 162 x 283 Accessories Included: Manual,Rubber Feet,Spikes,Front Grille Weight [kg]: 10.8

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

The OBERON 3 brings the best of both worlds. The cabinet size enables an optimal balance between inner volume for bass performance, and a compact appearance for small rooms, discreet audio setups or wall mounting. Combining the large sound of a floor-standing speaker with the compact design of a stand-mount, the OBERON 3 is the perfect fit for any stand-mount or shelf solution. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility. The 29 mm ultra light-weight soft dome tweeter integrates seamlessly with the 7” wood fibre (SMC based) woofer for impressive highs, detailed and crisp mids and a surprising coherent and well-timed bass. The OBERON 3 is easy to integrate into any room. Both the driver materials and geometry applied in the OBERON 3 have been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.  Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 47 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 87 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 108 Recommended Amplifier Power [W]: 25 - 150 Crossover Frequency [Hz]: 2,400 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 7" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 49 Connection Input: Single Wire Magnetic Shielding Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 5 - 50 Dimensions With Base (HxWxD) [mm]: 350 x 200 x 315 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 6.3

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

Given its ultra-compact size, the OBERON 1 is the smallest addition to the OBERON line-up. The cabinet size enables an optimal balance between inner volume optimised for bass performance, and a compact cabinet design suited for smaller rooms, discreet audio setups or wall mounting.  Like its larger siblings, the OBERON 1 makes use of the oversized 29 mm ultra light-weight soft dome tweeter to handle the highs and detailed mids, while the SMC based 5.25" wood fibre woofer renders the lower midrange and well-timed bass. With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.  The compactness of the OBERON 1 makes it easy to integrate into any room. To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied in the OBERON 1 have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]: 51 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 106 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,800 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type: Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Recommended Placement: Shelf or stand Recommended Distance From Wall [cm]: 1 - 50 Dimensions With Base (HxWxD) [mm]: 274 x 162 x 234 Weight [kg]: 4.2

The PF6ATM compact speaker was specifically designed to be placed atop a floorstanding speaker. Facing the ceiling, it reproduces surround effects present in the Dolby Atmos audio tracks offered by new Blu-ray movies. It adds a vertical dimension to the sound of a traditional 5.1 system to offer the viewer more realism and greater immersion. With the Elipson Prestige Facet 6ATM, the home cinema experience is more intense than ever before. These speakers handle the full range of immersive multichannel formats and add a vertical dimension to the listening experience. They have inherited all the trademarks of the Prestige Facet range: an elegant design, high-quality materials, a meticulous finish... As for their sonic performance, it is certified Dolby Atmos and meets a demanding set of criteria. The speaker is equipped with a 14 cm driver installed in a sealed enclosure for the reproduction of lows and mids. A bullet-shaped phase plug is installed in the center of the driver to limit vibrations and, consequently, reduce distortion. The driver's multifaceted, sculpted silicone surround ring serves to reduce the baffle effect and limit diffractions. At the front, a 25 mm soft dome tweeter offers ultra-efficient sound directivity, which is required for sound waves to reflect off the ceiling properly and for mid-highs to be kept from reaching the side walls. The result is a frequency response ranging from 65 Hz to 25 kHz (± 3 dB). Its 15° angle allows it to be placed atop a floorstanding speaker in order to obtain optimal reproduction of surround sound effects and live the intense experience of total immersion. Specifications : Speaker Atmos Number of way 2 Power 70 W RMS Tweeter 25 mm Mid-bass driver 140 mm Frequency Response (±3 dB)65 Hz - 25 kHz Sensitivity 90 dB/1W/1m Impedance 6 Ohms Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)207 x 181 x 290 mm Weight4,8 kg Weight with packaging, pair (W x H x D)370 x 300x 370 mm Weight with packaging, pair10,5 kg

The PF6ATM compact speaker was specifically designed to be placed atop a floorstanding speaker. Facing the ceiling, it reproduces surround effects present in the Dolby Atmos audio tracks offered by new Blu-ray movies. It adds a vertical dimension to the sound of a traditional 5.1 system to offer the viewer more realism and greater immersion. With the Elipson Prestige Facet 6ATM, the home cinema experience is more intense than ever before. These speakers handle the full range of immersive multichannel formats and add a vertical dimension to the listening experience. They have inherited all the trademarks of the Prestige Facet range: an elegant design, high-quality materials, a meticulous finish... As for their sonic performance, it is certified Dolby Atmos and meets a demanding set of criteria. The speaker is equipped with a 14 cm driver installed in a sealed enclosure for the reproduction of lows and mids. A bullet-shaped phase plug is installed in the center of the driver to limit vibrations and, consequently, reduce distortion. The driver's multifaceted, sculpted silicone surround ring serves to reduce the baffle effect and limit diffractions. At the front, a 25 mm soft dome tweeter offers ultra-efficient sound directivity, which is required for sound waves to reflect off the ceiling properly and for mid-highs to be kept from reaching the side walls. The result is a frequency response ranging from 65 Hz to 25 kHz (± 3 dB). Its 15° angle allows it to be placed atop a floorstanding speaker in order to obtain optimal reproduction of surround sound effects and live the intense experience of total immersion. Specifications : Speaker Atmos Number of way 2 Power 70 W RMS Tweeter 25 mm Mid-bass driver 140 mm Frequency Response (±3 dB)65 Hz - 25 kHz Sensitivity 90 dB/1W/1m Impedance 6 Ohms Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)207 x 181 x 290 mm Weight4,8 kg Weight with packaging, pair (W x H x D)370 x 300x 370 mm Weight with packaging, pair10,5 kg

The Elipson SUB8 is the element which brings breadth and depth to your films. Compact, it blends in harmoniously with your interior and delivers all the intensity you'll need. Subwoofers are a fundamental part of a home cinema installation. The Elipson SUB8 is the element of choice to bring breadth and depth to your films. It is equipped with a 26 cm driver installed in a bass-reflex configuration. As such, it is designed to produce a considerable amount of sound pressure and offer a physical listening experience. The Elipson SUB8's elegantly designed cabinet inherits exclusive technologies from the Prestige Facet family and is available in black, white or walnut. The subwoofer's very linear frequency response ranges from 35 Hz to 150 Hz (± 3 dB). Its multifaceted, sculpted silicone surround ring limits diffractions and minimizes the baffle effect. The frequency response curve is thus more gradual and the listening experience more comfortable. The bass-reflex port situated beneath the subwoofer improves the diffusion of low and infrabass frequencies throughout the entire listening room regardless of where the subwoofer is placed. The integrated Class D amplifier develops 150 watts of power. The diameter of its driver and its performance make the Elipson SUB8 an element of choice to complete your home cinema installation and bring it all the intensity required by the Seventh Art. Specifications : Speaker Subwoofer Power 150 W RMS Woofer 8 " Class D Frequency Response (±3 dB)35 Hz - 150 Hz Subsonic filter 24 dB à 20 Hz Variable cut-off frequency 50 Hz à 150 Hz Standby Auto Input Stereo line level, LFE Custom-made loudspeakers Rubber edge Loudspeakers On specifications Finish Lacquered front panel, MDF box & vinyl veneer Colors Black, White, Black/Walnut Dimensions (W x H x D)350 x 374 x 383 mm Weight15,5 kg Dimensions packaging (W x H x D)445 x 500 x 435 mm Weight with packaging, unit16,7 kg

Tα ηχεία δύο δρόμων RAIN της Elipson είναι εξωτερικού χώρου και χαρακτηρίζονται από εξαιρετική αντοχή στις έντονες θερμοκρασίες σε κρύο και ζέστη, καθώς και σε συνθήκες υψηλής υγρασία. Αυτά τα αδιάβροχα ηχεία μπορούν να τοποθετηθούν στο σπίτι δίπλα στην πισίνα, στον κήπο, κάτω από μια βεράντα, αλλά και σε μπαρ, εστιατόρια, κουζίνες, spa ή υπαίθριες βεράντες. Τα ηχεία RAIN είναι κατασκευασμένα με ιδιαίτερη προσοχή και διαθέτουν μια εξαιρετικά άκαμπτη καμπίνα αντι-UV και μια σχάρα ανθεκτική στη σκουριά, που αυξάνουν την διάρκεια ζωής τους. Κάθε μοντέλο RAIN διαθέτει ενσωματωμένο σύστημα τοποθέτησης σε τοίχο. Εύκολο στην εγκατάσταση, αυτό το σύστημα παρέχει μια γωνία διασποράς 180 °, εξασφαλίζοντας τη βέλτιστη ποιότητα ήχου που γεμίζει με ευκολία την περιοχή κάληψης του. Υπάρχουν τρία μεγέθη ανάλογα με την απαιτούμενη ισχύ: τα RAIN 4,RAIN 6 και RAIN 8 τα οποία διαθέτουν ένα μεγάφωνο 4 ", 6,5" και 7,9 "αντίστοιχα. Τα ηχεία RAIN της Elipson διατίθενται σε λευκό ή μαύρο χρώμα.   ΠΡΟΔΙΑΓΡΑΦΕΣ: Τύπος: εξωτερικό ηχείο 2 δρόμων Ισχύς: 120W Απόκριση συχνότητας (± 3 dB): 80Hz - 20KHz Συχνότητα διέλευσης: 3000 Hz Ευαισθησία: 89 dB / 1W / 1m Αντίσταση: 8 Ohms Μεγάφωνα: Tweeter: 25 mm mid: 165 mm Δείκτης προστασίας: IPX4 Θερμοκρασία min: -25 ° C Θερμοκρασία max: + 70 ° C (25% υγρασία) Υγρασία: + 40 ° C κάτω από το 95% Traitements: Αντι-σκοριακό, αντι-UV

Specifications : Type 2 way Bass-reflex coaxial speaker Power 80W Frequency Response (±3 dB) 80Hz - 20KHz Crossover frequency 8000 Hz Sensitivity 86 dB/1W/1m Impedance 8 Ohms Loudspeakers Tweeter : 1/2" mylar dome ; Mid-bass : 4" PP cone Finish ABS hull, metal grill Colors Black, white Provided accessories 1,80m cable, snap hook Dimensions Ø190 x H258 mm Weight 1,9 kg

Θρυλικός Ήχος Το WA-84 είναι ένα πυκνωτικό μικρόφωνο μικρού διαφράγματος με βάση το κύκλωμα του κλασικού μικροφώνου. Το WA-84 έχει σχεδιαστεί για εφαρμογές σε studio, home studio, live και podcast και προσφέρει εξαιρετικό ήχο σε διάφορα όργανα και πηγές, όπως π.χ. ακουστικές / ηλεκτρικές κιθάρες, ακουστικά / ηλεκτρικά μπάσα, τύμπανα, πιάνο, χορδές, χάλκινα και ξύλινα όργανα και μια σειρά από άλλες πηγές. Μικρό μέγεθος, μεγάλος ήχος. Το WA-84 έχει μοναδικό ήχο για το μικρό του μέγεθος και χρησιμοποιεί έναν Heavy-duty μετασχηματιστή Nickel CineMag στην διαδρομή του σήματος για να πιο ζεστές και δυνατές πηγές ήχου. Boutique Tone Mε υπερηφάνεια σας προσφέρουμε κάτι ξεχωριστό στην αγορά με τη χρήση τεχνολογίας μεγάλων μετασχηματιστών (CineMag USA) σε ένα πυκνωτικό μικροφώνου μικρού διαφράγματος. Το αποτέλεσμα είναι ένα κύκλωμα που ακούγεται πανέμορφα και εξαιρετικά φυσικά με πολύ ζεστό tone. Η Κάψα Το WA-84 χρησιμοποιεί μια vintage-style κάψα σχεδιασμένη για να μιμείται την κλασική γραμμή και τις τεχνικές σχεδιασμού του θρυλικού μικροφώνου. H κάψα του WA-84 κατασκευάζεται προσεκτικά από έναν αυστραλιανό προμηθευτή με ακρίβεια στις προδιαγραφές και τον ήχο του vintage. Το Κύκλωμα Το WA-84 είναι κλάσης Α και χρησιμοποιεί μετασχηματιστή CineMag USA, πυκνωτές πολυστυρενίου και Wima και Fairchild FET ηλεκτρονικά κυκλώματα. Οι πυκνωτές Το WA-84 χρησιμοποιεί περήφανα πυκνωτές Wima, πολυστυρενίου διαμέσου των οπών. Χαρακτηριστικά: Χρησημοποιεί μετασχηματιστή Cinemag USA Πολικό διάγραμμα: Καρδιοειδές Πλήρως διακριτή διαδρομή σήματος -Discrete- Vintage style Ήχος Phantom Power 48V Συχνότητα: 20HZ - 20KHZ Ευαισθησία: -39DB ή 11MV / PA @ 1KHZ Αντίσταση εξόδου: 200Ω PAD: 0DB ή -10DB Μέγιστο SPL: 123 / 133DB @ 1KHZ, 0,5% THD, 0 / -10DB S / N: 78DBA (IEC651) Nominal Noise: 16DBA (IEC651) Δυναμική Περιοχή: 107DBA (IEC651) Σύνδεση: XLR ΧΡΥΣΟ 3 PIN Βάρος: 122G Διαθέσιμα χρώματα: Νίκελ & Μαύρο

The ULN2 3D upgrade card is a user-installable internal expansion board for the Metric Halo ULN2 audio interface offering cutting edge functionality and seamless compatibility with the latest in computer audio technology.3D replaces the ULN2’s built-in digital and computer interfacing board to enable not only USB-C connectivity, but also MH Link - Metric Halo’s low-latency and high-bandwidth audio/clock/data transfer via Gigabit Ethernet, and MH EdgeBus - a newly designed audio card expansion slot with a huge range of available options including S/PDIF, AES and MADI.The new hardware upgrade also supports a swathe of new software functionality including MH Console - Metric Halo’s 64-bit lightning-fast I/O grid application with flexible routing, MH Mixer for 128 input zero-latency mixing, MH Monitor for surround capable system processing and MH Record - a dedicated 128 input multitrack recorder complete with deep-hardware integrationMain FeaturesPreloaded SPDIF/AES EdgebusUSB-C Connectivity2x GigE MH-Link ports75Ω BNC Word Clock I/OShips with 1x USB-A to USB-C cable and 1x 1ft Cat 5e cableLegacy Version Only: ADAT I/O board and ADAT I/O ribbon cable included for Legacy 2882/ULN-2PerformanceSupported Sample Rates: 44.1k — 192kMono Mix Busses:64Mono Mix Inputs:128Mix Crosspoints: 8192 (fully interpolated)VU Meters: 1024PPM Meters: 1024Peak Meters: 1024Router Crosspoints: 1024Point-To-Point Router Latency: 3 samples (< 16 µs)MH Link Total System Latency: 3 samples (< 16 µs)DSPDSP Memory: 1GBCores: 2I/OUSB: 1x USB-C port (Host & device capable)MH Link/Ethernet ports: 2x Gigabit Ethernet

The 3D upgrade card is a user-installable internal expansion board for the Metric Halo 2882 audio interface offering cutting edge functionality and seamless compatibility with the latest in computer audio technology. 3D replaces the built-in digital and computer interfacing board to enable not only USB-C connectivity, but also MH Link - Metric Halo’s low-latency and high-bandwidth audio/clock/data transfer via Gigabit Ethernet, and MH EdgeBus - a newly designed audio card expansion slot with a huge range of available options including S/PDIF, AES and MADI. The new hardware upgrade also supports a swathe of new software functionality including MH Console - Metric Halo’s 64-bit lightning-fast I/O grid application with flexible routing, MH Mixer for 128 input zero-latency mixing, MH Monitor for surround capable system processing and MH Record - a dedicated 128 input multitrack recorder complete with deep-hardware integration. Main Features Preloaded SPDIF/AES Edgebus USB-C Connectivity 2x GigE MH-Link ports 75Ω BNC Word Clock I/O Ships with 1x USB-A to USB-C cable and 1x 1ft Cat 5e cable Legacy Version Only: ADAT I/O board and ADAT I/O ribbon cable included for Legacy 2882/ULN-2 Performance Supported Sample Rates: 44.1k — 192k Mono Mix Busses:64 Mono Mix Inputs:128 Mix Crosspoints: 8192 (fully interpolated) VU Meters: 1024 PPM Meters: 1024 Peak Meters: 1024 Router Crosspoints: 1024 Point-To-Point Router Latency: 3 samples (< 16 µs) MH Link Total System Latency: 3 samples (< 16 µs) DSP DSP Memory: 1GB Cores: 2 I/O USB: 1x USB-C port (Host & device capable) MH Link/Ethernet ports: 2x Gigabit Ethernet

The 3D upgrade card is a user-installable internal expansion board for the Metric Halo 2882 audio interface offering cutting edge functionality and seamless compatibility with the latest in computer audio technology. 3D replaces the built-in digital and computer interfacing board to enable not only USB-C connectivity, but also MH Link - Metric Halo’s low-latency and high-bandwidth audio/clock/data transfer via Gigabit Ethernet, and MH EdgeBus - a newly designed audio card expansion slot with a huge range of available options including S/PDIF, AES and MADI. The new hardware upgrade also supports a swathe of new software functionality including MH Console - Metric Halo’s 64-bit lightning-fast I/O grid application with flexible routing, MH Mixer for 128 input zero-latency mixing, MH Monitor for surround capable system processing and MH Record - a dedicated 128 input multitrack recorder complete with deep-hardware integration. Main Features Preloaded SPDIF/AES Edgebus USB-C Connectivity 2x GigE MH-Link ports 75Ω BNC Word Clock I/O Ships with 1x USB-A to USB-C cable and 1x 1ft Cat 5e cable Legacy Version Only: ADAT I/O board and ADAT I/O ribbon cable included for Legacy 2882/ULN-2 Performance Supported Sample Rates: 44.1k — 192k Mono Mix Busses:64 Mono Mix Inputs:128 Mix Crosspoints: 8192 (fully interpolated) VU Meters: 1024 PPM Meters: 1024 Peak Meters: 1024 Router Crosspoints: 1024 Point-To-Point Router Latency: 3 samples (< 16 µs) MH Link Total System Latency: 3 samples (< 16 µs) DSP DSP Memory: 1GB Cores: 2 I/O USB: 1x USB-C port (Host & device capable) MH Link/Ethernet ports: 2x Gigabit Ethernet

Tα ηχεία δύο δρόμων RAIN της Elipson είναι εξωτερικού χώρου και χαρακτηρίζονται από εξαιρετική αντοχή στις έντονες θερμοκρασίες σε κρύο και ζέστη, καθώς και σε συνθήκες υψηλής υγρασία. Αυτά τα αδιάβροχα ηχεία μπορούν να τοποθετηθούν στο σπίτι δίπλα στην πισίνα, στον κήπο, κάτω από μια βεράντα, αλλά και σε μπαρ, εστιατόρια, κουζίνες, spa ή υπαίθριες βεράντες. Τα ηχεία RAIN είναι κατασκευασμένα με ιδιαίτερη προσοχή και διαθέτουν μια εξαιρετικά άκαμπτη καμπίνα αντι-UV και μια σχάρα ανθεκτική στη σκουριά, που αυξάνουν την διάρκεια ζωής τους. Κάθε μοντέλο RAIN διαθέτει ενσωματωμένο σύστημα τοποθέτησης σε τοίχο. Εύκολο στην εγκατάσταση, αυτό το σύστημα παρέχει μια γωνία διασποράς 180 °, εξασφαλίζοντας τη βέλτιστη ποιότητα ήχου που γεμίζει με ευκολία την περιοχή κάληψης του. Υπάρχουν τρία μεγέθη ανάλογα με την απαιτούμενη ισχύ: τα RAIN 4,RAIN 6 και RAIN 8 τα οποία διαθέτουν ένα μεγάφωνο 4 ", 6,5" και 7,9 "αντίστοιχα. Τα ηχεία RAIN της Elipson διατίθενται σε λευκό ή μαύρο χρώμα.   ΠΡΟΔΙΑΓΡΑΦΕΣ: Τύπος: εξωτερικό ηχείο 2 δρόμων Ισχύς: 120W Απόκριση συχνότητας (± 3 dB): 80Hz - 20KHz Συχνότητα διέλευσης: 3000 Hz Ευαισθησία: 89 dB / 1W / 1m Αντίσταση: 8 Ohms Μεγάφωνα: Tweeter: 25 mm mid: 165 mm Δείκτης προστασίας: IPX4 Θερμοκρασία min: -25 ° C Θερμοκρασία max: + 70 ° C (25% υγρασία) Υγρασία: + 40 ° C κάτω από το 95% Traitements: Αντι-σκοριακό, αντι-UV

The Elipson Prestige Facet 8B speaker introduces a host of innovative technologies. The most visible is undeniably the ring of sculpted facets surrounding each driver, which gives the range its name. A rigorous design process ensures optimal acoustic performance, while an elegant finish allows the speaker to blend in harmoniously with your interior decor.The Prestige Facet 8B is availble in black, walnut and white. Signs of a high-quality finish include a double-layer front panel to which a black or white lacquer is applied. Medium-sized, it is equipped with a 17 cm low midrange driver featuring a bullet-shaped phase plug to limit vibrations and, consequently, reduce distortion.A 25 mm soft dome tweeter reproduces highs with finesse and precision. The multifaceted, sculpted silicone surround rings encircling each driver reduce the baffle effect and limit diffractions. The result is a more linear response curve and a smoother listening experience.Extra attention has been paid to the speaker's cabinet. The lacquered front panel is composed of two dense, thick materials and strengthened by several internal brackets. The speaker's steep-slope filter relies on highly efficient, audiophile-grade components. As for the finish quality, it is not overlooked and offers benefits such as premium-quality vinyl and a lacquered front panel.At Elipson, the back counts as much as the front. That is why our designers have created rounded, high-end dual speaker terminals which offer the possibility of biwiring and biamplifying while benefiting from silver-plated contacts to maximize signal transmission. Banana plugs may also be connected to the terminals.Neutral and accurate, this speaker delivers sound which is free from colouration and faithful to the original recording. Impressions of smoothness and serenity emanate from each track as it is masterfully reproduced, without any hint of harshness. The experts weren't wrong when they awarded the Elipson Prestige Facet 8B speaker with the Choc Classica and Diapason d'Or awards. A champion in its category!The Prestige Facet 8B's high sensitivity allows it to be paired with any amplifier with a power rating of 85 W or less per channel. Its lively performance make it an excellent surround sound speaker for a home cinema installation.   Specifications:Speaker: BookshelfNumber of way: 2Power: 85 W RMSTweeter: 1 "Mid-bass driver: 6,5 "Frequency Response (±3 dB): 47 Hz - 25 kHzSensitivity: 91 dB/1W/1mImpedance: 6 OhmsDimensions (W x H x D): 230 x 361 x 347 mmWeight with packaging, pair (W x H x D): 525 x 460 x 405 mmWeight with packaging, pair: 20,3 kg

Combining classic audio design with new technology Tangent's new premium radio Tuner ll provides easy and reliable access to many local and national radio stations thanks to its latest technology high quality tuner.  The FM analogue part of the tuner features RDS and is both clear and refined, whilst the digital DAB and DAB + tuners offer fast, locked-in reception of all available DAB + channels with stunning clarity.  The large white text LED display clearly provides the information you need whichever radio band and station you’re listening to. Hi-Fi sound quality from a mini radio The new Tuner ll fits effortlessly into Tangent's new mini system. By combining the Tangent Ampster BT II and CD ll, you can enjoy a complete, compact sized HI-FI system with premium audio quality and performance.  Each Tuner ll, Ampster BT ll and CD ll is less than the width of an A4 sheet of paper and is only 7cm high, making the system only 21cm high when stacked! So the small size of each component takes up less space in the living room, kitchen - or wherever you enjoy your music. A remote control for all The remote control for the Tuner II also operates the Ampster BT II and CD ll, so when all three components are stacked together or placed separately, each remote control can be used to operate all components.  Or you can choose to use only one remote control and put the two other remotes away!   Features FM/DAB/DAB+ Built-in power supply Alu Front Optical and analogue out

Ο θρυλικός ήχος. Το WA-251 σχεδιάστηκε και δημιουργήθηκε στα πρότυπα των κλασικών vintage μικροφώνων...  Για υψηλής ποιότητας ηχογραφήσεις, σε προσιτή τιμή.        Το κλασικό '251 έγινε εξαιρετικά δημοφιλές τη δεκαετία του 1960 και θεωρείται σήμερα ένα από τα καλύτερα πυκνωτικά μικρόφωνα που δημιουργήθηκαν ποτέ.   Το κλασικό '251 εξακολουθεί να χρησιμοποιείται ευρέως σήμερα σε επαγγελματικά στούντιο ,αλλά έχει γίνει εξαιρετικά σπάνιο και απαγορευτικό για την απόκτηση του λόγο του υψηλού του κόστους.   Ο σχεδιασμός του WA-251 για να ακούγεται σαν το κλασικό '251 δεν ήταν εύκολη υπόθεση,  κυρίως επειδή κάποιο από τα vintage εξαρτήματα δεν κατασκευάζονται πλέον ή δεν είναι διαθέσιμα.   Παρ' όλα αυτά δημιουργήσαμε το WA-251 ώστε να μπορούν να το αποκτήσουν περισσότεροι άνθρωποι από ποτέ !    Τεχνικά Χαρακτηριστικά:   Custom WA-12-B-60V διπλού πηνίου, Vintage CK12-Style Capsule All-Brass Μετασχηματιστής εξόδου CINEMAG USA JJ SLOVAK 12AY7 TUBE VACUUM GOTHAM 5 GAC-7, καλώδιο 7 ακίδων Πολικά διαγράμματα: 3 - Καρδιοειδές, Οmni , Figure of eight Συχνοτικό εύρως: 20 HZ ~ 20 KHz Αντίσταση εξόδου: 200 OHMS Μax SPL: 132DB (

It’s time to enjoy your CD collection again As part of Tangent’s new mini-system, the CD II plays an integral role when connected with the new Ampster II and Tuner II. Due to its mini, compact size you’ll now be able to play your CD collection on a player that’s both space saving and technology future-proof.  The CD II is a multi-format digital disk player that’s compatible with all current CD formats (including home-made MP3 files)… and with both digital optical and regular line-outputs, the CD II is designed to produce lossless connectivity to any separates HI-FI system. High quality CD sound from a mini player The new CD ll fits effortlessly into Tangent's new mini system. By combining the Tangent Ampster BT II and Tuner ll, you can enjoy a complete, compact sized HI-FI system with premium audio quality and performance.  Each CD ll, Ampster BT ll and Tuner ll is less than the width of an A4 sheet of paper and is only 7cm high, making the system only 21cm high when stacked! So the small size of each component takes up less space in the living room, kitchen - or wherever you enjoy your music. A remote control for all The remote control for the CD II also operates the Ampster BT II and Tuner ll, so when all three components are stacked together or placed separately, each remote control can be used to operate all components.  Or you can choose to use only one remote control and put the two other remotes away!   Features Optical digital out Analog RCA out Compact design Built-in power supply 

The COMP-2A is a one channel vintage style Compressor / Leveler using vacuum tubes in the signal and side-chain path. The input and output is transformer balanced, using two different transformers, each one optimized for its purpose. This is the way audio components were built before transistors and integrated circuits became available.Integrated circuits are small and cheap and widely used in most modern designs. The drawback is that audio components built with modern technology doesn´t always provide the best perceived sound quality or the type of character that the modern user desires.The subjective sound quality delivered by vintage equipment is often prefered over the one delivered by modern units, a situation that is even more obvious now when music is recorded with clean-sounding digital audio equipment.This is the reason why so many vintage audio components are cloned and produced again and also why the vintage originals are often very expensive on the second hand market.The circuit used in the COMP-2A is based on a classic design that was originally produced in the early 1960s and it was initially intended for broadcast applications. It uses an electro-luminescent panel and a photoelectric cell to control gain. This gives it a unique, program dependent compression characteristic. In addition, the all tube signal path and the transformers adds a wonderful and musical character to the sound.The ease of use with only two main controls makes it very simple to achieve the desired sound. These attributes has made the original units a favourite of engineers and musicians worldwide. This classic sound is now available at a very affordable price point with the COMP-2A.Features:Vintage style all tube signal path. The tubes are fitted with grounded shields.Transformer balanced input and output. Can drive almost any load, balanced or unbalanced.Golden Age Project's version of the classic optical unit using a long life electroluminescent panel and two carefully matched Silonex NSL5910 photoresistors for T4B-style electro-optical gain control with program dependent attack and release times.Very simple to operate with only two main controls, Gain and Peak Reduction.HF control can make the side-chain circuit more sensitive to mid and high frequency content.Linear low noise regulated filament and high voltage power supply.A big meter selectable to show gain reduction or output level at two different reference levels.Hardwire bypass switch for easy comparisons.XLR and TRS input and output jacks for flexible connections.Link jack and switch for connecting to another unit for stereo operation.All external controls located on the front panel.Compact 2RU half rack format. Two units can be mounted with our 19-inch rack kit, the UNITE BIG.A solid build quality that will last many years of normal use.

Απο τις αρχές του 1990 το Manley ELOP stereo electro-optical limiter  ήταν ενα απο τα θρυλικά μηχανήματα compressor που έβρισκες σε όλα τα στούντιο και σε χιλιάδες δισκογραφικές δουλειές. Ειδικά για χρήση σε φωνές θεωρείτο απο τους καλύτερους δυναμικούς επεξεργαστές   που κατασκευάστηκαν ποτέ.Πως μπορείς να βελτιώσεις ένα τέτοιο μηχάνημα και ταυτόχρονα να το προσφέρεις σε καλύτερη τιμή ?Κατ’ αρχάς η Manley πρόσθεσε τώρα ένα νέο compression rate 3:1 έτσι ώστε να μπορεί να χρησιμοποιηθεί και σε stereo bus εφαρμογές . Με νέα αρχιτεκτονική αλλά διατηρώντας όλα τα χαρακτηριστικά και την εμπειρία απο την αρχική σχεδίαση, με χρήση του νέου λαμπάτου line amplifier  αλλά και του  White Follower στο στάδιο εξόδου και με εκπληκτική ποιότητα κατασκευής και χρήση  νέου τροφοδοτικού, το νέο ELOP + περιλαμβάνει  όλα αυτά για τα οποία αγαπήθηκε το παλαιό με πολλές νέες δυνατότητες !Features:10:1 Limiter and 3:1 Compressor ratiosAll-tube audio path uses 5751 and 6922 dual triodesBalanced Manley IRON® transformer-coupled XLR InputsXLR impedance-balanced outputsBYPASS switches and AUTOMUTE with warm-up delayLarge illuminated VU meters read Gain Reduction or Output levelsSTEREO LINKSide-Chain High-Pass FilterUniversal internal power supply operates worldwide 90-250V~AC 50/60Hz

Ο Μanley Nu Mu είναι ένας νέος compressor που προσφέρει τις καλύτερες ηχητικές ιδιότητες συνδιάζοντας λαμπάτο κύκλωμα σε συνδιασμό με transistor. Ενσωματώνει το all-tube, T-bar-mod από το  φημισμένο Variable Mu και συνεχίζει την εξαιρετικής ποιότητας αλυσίδα ήχου του. Θα εντυπωσιαστείτε απο τα αποτελέσματα - γλυκός ήχος, ζεστός με πολλές δυναμικές. Το καινοτόμο κύκλωμα HIP είναι ενσωματωμένο στον Manley, ενισχύοντας την λεπτομέρεια σε χαμηλές στάθμες χωρίς να επιρεάζει τις αρμονικές του ήχου. Χειροποίητα κατασκευασμένο στο εργοστάσιο της Manley, στην California, ο Nu Mu  προσφέρει απίστευτα υψηλη ποιότητα ήχου, ποιότητα κατασκευής, απόδοση και εξαιρετική αξία. Ακριβώς ότι θα περιμένατε απο την Manley.Ιδιότητες:Hybrid tube/solid-state compressor/limiterDual channel (stereo linkable)Features Manley's IRON input transformers4 hand-selected and matched 6BA6 vacuum tubesBalanced XLR I/OHIP circuit elevates softer dynamics without crushing louder onesLighted VU meters, switchable between Gain Reduction and Output LevelCustom, internal, universal high-voltage switched-mode power supply, for worldwide operation Χαρακτηριστικά:Type: Tube/solid state (4 x 6BA6 vacuum tubes)Number of Channels:    2Controls: Threshold, Attack, Recovery, OutputRatio: 1.5:1, 4:1 to 20:1Side Chain Inserts:  2 x 1/4" TRSInputs:  2 x XLROutputs:  2 x XLRRack Spaces:  2UHeight:  3.5"Depth:  7"Width;  19"Weight:  8.5 lbs.Manufacturer Part Number:  NuMu​​

H Manley σχεδίασε το Core  ένα  channel strip που αλλάζει τα δεδομένα σε τιμή πρός απόδοση , ώστε να μπορείτε να πατάτε το Rec και να επικεντρώνεστε στην ερμηνεία σας , και όχι στο signal chain . Έχει, την ποιότητα , την απόδοση και την ευελιξία για την οποία το VoxBox είναι γνωστό, σε τιμή που το καθιστά προσιτό σε κάθε σοβαρό καλλιτέχνη ή μηχανικό ήχου . Πέρνετε έναν παγκόσμιας κλάσης Manley προενισχυτή μικροφώνου , που ακολουθείται από έναν  3:1 Elop στυλ κομπρέσορα για εύκολο κοντρολάρισμα των δυναμικών . Οι ηχολήπτες στο Athens Mastering είναι ενθουσιασμένοι από το ενεργό Baxandall EQ  και το FET brickwall limiter, το οποίο με γρήγορο attack στο τέλος της αλυσίδας προστατεύει τους μετατροπείς σας από τα οverloads . Ακόμα κι αν περάσετε απο 'κει το σήμα, χωρίς να πειράξετε ούτε ένα κουμπί ,να είστε βέβαιοι ότι θα πάρετε ένα εκπληκτικό ήχο .Χαρακτηριστικά Manley Core Reference Channel Strip:Εύκολο στη χρήση και φοβερό ηχητικά channel stripΒάσισμένο στο βραβευμένο VoxBox Class A λαμπάτο προενισχυτή μικροφώνου με τους περίφημους μετασχηματιστές της  Manley τυλιγμένους στο χέριDirect input χρησιμοποιεί το ίδιο κύκλωμα με του Manley SLAM! για φανταστικές direct-instrument ηχογραφήσειςElop κομπρέσορας με αναλογία 3:1 τιθασεύει οποιοδήποτε σήμα με απόλυτη διαφάνεια.Baxandall EQ με  low/high shelving και sweepable mid για ευέλικτη ηχητική διαμόρφωση.Fast attack FET brickwall limiter εξασφαλίζει  το να μην κλιπάρουν οι μετατροπείς σας κατά την εγγραφή.Ευέλικτο metering που μπορεί να μετρήσει στάθμες εισόδου, εξόδου και compressor gain reduction levels 

Το νέο Pre -73 DLX ένας μονοκάναλος προενισχυτής μικροφώνου με vintage στύλ. Η διαδρομή του σήματος χρησιμοποιεί μόνο ξεχωριστά διακριτά στοιχεία, όπως πυκνωτές, αντιστάσεις, και τρανζίστορ. Oι τρείς διαφορετικοί μετασχηματιστές που διαθέτει σε mic in , line in και στην έξοδο, ειναι κατασκευασμένοι για να προσφέρουν το βέλτιστο αποτέλεσμα.Αυτός ήταν ο τρόπος που κατασκευάζονταν τα audio εξαρτήματα πριν την δημιουργία των ολοκληρωμένων κυκλωμάτων.Η εξαιρετική ποιότητα ήχου που προσφέρει είναι συνήθως καλήτερη απο αυτή σύγχρονων μονάδων, κάτι που γίνεται προφανές στη καθαρότητα της σημερινής μουσικής η οποία έχει καταγραφεί με ψηφιακά μέσα.Το κύκλωμα που χρησιμοποιείται στο Pre -73 DLX είναι παρόμοιο με το κύκλωματου κλασικού 1073, με αντίστοιχο χαρακτήρα και εξίσου ζεστό, ζωηρό και γλυκό ήχο. Αυτά τα χαρακτηριστικά έχουν ακουστεί σε αμέτρητες ηχογραφήσεις τα τελευταία 40 χρόνια και είναι ένας ευέλικτος ήχος που λειτουργεί πολύ καλά με τιςπερισσότερες πηγές ήχου και στα περισσότερα μουσικά είδη. Ο χαρακτήρας αυτού του ήχου είναι τώρα διαθέσιμη σε εκπληκτικά χαμηλό κόστος, ώστε να είναι προσιτή σε όλους.O PRE-73 DLX ΕΧΕΙ ΜΙΑ ΠΛHΘΩΡΑ ΒΕΛΤΙΩΣΕΩΝ ΣΕ ΣΧΕΣΗ ΜΕ ΤΟΝ PRE-73 MKIIITantalum capacitors in the signal path.Selectable 1073-style high pass filter, 50Hz, 80Hz, 160Hz and 300Hz.Output Attenuator -7, -14, -21 and -28 dB (located after the output transformer) allows overdriving the output stage and the output  transformer for added character by lowering the output signal to a suitable level.The circuit board is prepared for Carnhill Mic and Line transformer and high pass inductor.The Insert jack can be switched in/out from the front panel. An internal jumper can select that the Insert jack always has an output signal.Switchable 600 ohm Output Termination and Ground Lift on the back panel.Selectable Active or Passive DI input and selectable input impedance in active mode, Hi Z or 100 kohm, by internal jumpers.The DI can signal can be selected to pass or bypass the mic input transformer by internal jumpers.Relays are used to control internal switching for DI input, Phantom power, Mic Low Z, Insert and Phase for shorter circuit board signal paths. The relays are controlled by front panel switches.Revised gain switch for added headroom.Circuit board star grounding scheme.Revised power supply with separate regulators for the audio circuits and relay and LED circuits

Shock mount με pop filter

Ένας από τους πιο δημοφιλείς compressors για mastering, που λειτουργεί εξολοκλήρου με λυχνίες. Ο Manley Vari-Mu ακούγεται σε χιλιάδες δίσκους των τελευταίων δεκαετιών και είναι πλέον αναπόσπαστο κομμάτι όλων των mastering studios.Το COMPRESS mode λειτουργεί με ratios που κυμαίνονται μεταξύ 1.5 και 1, ενώ το πιο δραστικό LIMIT mode αρχίζει από 4:1 και ανεβαίνει σε 20:1 καθώς μεγαλώνει το gain reduction. Επίσης, το knee γίνεται πιο ομαλό όσο εφαρμόζεται περισσότερο limiting.Χαρακτηριστικά:MANLEY input & output transformers with nickel laminations in mu-metal cases with flat frequency response from 20Hz-25KHzBALANCED INPUTS & OUTPUTS (600 ohms)Fully differential ALL-TUBE circuitry using one each 5670, 5751, 7044 or 5687, & 12AL5 per channelIndependently regulated B+ and Heater suppliesHard-wire BYPASS switchSilent conductive plastic dual INPUT attenuatorRECOVERY 5 steps: 0.2s, 0.4s, 0.6s, 4sec., 8sec.Variable ATTACK: 25msec-70msecContinuously variable THRESHOLDLIMIT (4:1 to 20:1) or COMPRESS (1.5 to 1)HP SC: High Pass Side Chain Filter -3dB @ 100HzLarge ILLUMINATED Sifam METERS (older units before serial number MSLC61642 shipped before 12/2003 use: 26V 1.2W FESTOON LAMPS; Manley's Part Number: VAR016B) Order spare bulbs using our parts order form. (newest units after serial number MSLC61642 shipped after 12/2003 use white LED lighting)STEREO LINK SWITCHSeveral units can be linked for Surround (custom order )Maximum gain: 35dBMax. output: +30dBu (26Vrms) 26dB Headroom

To Golden Age Unite είναι ένα ράφι 1U rack, που ενώνει δύο Pre73.

Το FC 4 είναι ένα χαμηλού κόστους, μικρoύ διαφράγματος, transformerless πυκνωτικό μικρόφωνο με χαμηλού θορύβου Α τάξης ηλεκτρονικά. Διάφραγμα με καρδιοϊδές πολικό διάγραμμα και μεγάλη ευαισθησία.  Τα χαρακτηριστικά του FC 4 είναι ιδανικά για πολλών ειδών ηχογράφησης και live. Θα πιάσει τη «ατάκα» της αγαπημένης κιθάρας σας, κάθε λεπτομέρεια του ακουστικού πιάνου σας, την πολυπλοκότητα μιας καθαρής ηλεκτρικής κιθάρας, την ακατέργαστη δύναμη της παραμόρφωσης του ενισχυτή, κ.λπ.  Εξοπλισμένο με high-pass φίλτρο και διακόπτη pad. Αυτό τον καθιστά επίσης κατάλληλο για δυνατούς ήχους και ακόμη και φωνητικές ηχογραφήσεις.

Το FC 1 MKII σχεδιάστηκε με βάση τα κλασικά πυκνωτικά μικρόφωνα μεγάλου διαφράγματος. Θελήσαμε να φτιάξουμε ένα μικρόφωνο με μερικά από τα χαρακτηριστικά των παλαιών, καλών γερμανικών μοντέλων. Το FC 1 έχει center-terminated κάψα που προσθέτει αρμονικές και γλυκύτητα στον ήχο. Ο σχεδιασμός αυτός δίνει στο μικρόφωνο την δυνατότητα να επεξεργαστεί δυνατότερους ήχους χωρίς τραχύτητα ή άλλα προβλήματα. Ο μετασχηματιστής εξόδου μπορεί να επεξεργαστεί τα μπάσα εξαιρετικά καλά και να παράγει έναν πολύ παχύ ήχο, που μόνο λυχνίες και μετασχηματιστές μπορούν να αποδώσουν. Το ρετρό στυλ του FC 1 είναι σχεδιασμένο για να αποδώσει τη μέγιστη ποιότητα ήχου με όσο το δυνατόν περισσότερες ηχητικές πηγές, σε μια τιμή που ο καθένας μπορεί να διαθέσει. Ακούγεται καταπληκτικά με φωνητικά, ακουστική κιθάρα, κρουστά, ενισχυτές, πιάνο, τύμπανα, και πολλά άλλα