Audio Technica VM750SH

Audio Technica AT-VM95SH

Χειροποίητη κεφαλή,Τύπος: VM Stereo Dual Magnet

218 €

Music Hall Spirit

Η κεφαλή Music Hall Spirit είναι η ιδανική οικονομική επιλογή για κάθε λάτρη του ήχου που αναζητά υψηλής ποιότητας ήχο. Αναπτύχθηκε και κατασκευάστηκε ειδικά για τη Music Hall από την Audio Technica, εξασφαλίζοντας κορυφαία απόδοση.Αυτή η κεφαλή κινούμενου μαγνήτη (moving magnet) διαθέτει βραχίονα χαμηλής μάζας και ελλειπτική ακίδα, που βοηθά στην αναπαραγωγή καθαρού και ακριβούς ήχου με ελάχιστη παραμόρφωση. Είναι συμβατή με μια ευρεία γκάμα πικάπ και βραχιόνων, καθιστώντας την εύκολη στη χρήση και την εγκατάσταση. Επιπλέον, είναι κατασκευασμένη για να διαρκεί, με αντικαθιστώμενη ακίδα, που εξασφαλίζει μακροχρόνια ανθεκτικότητα.Συνολικά, η κεφαλή Music Hall Spirit είναι μια εξαιρετική επιλογή για όποιον αναζητά μια οικονομική, αλλά υψηλής απόδοσης κεφαλή phono. Η μουσικότητά της και η συμβατότητά της την καθιστούν μια φανταστική επιλογή για κάθε λάτρη του ήχου που θέλει να αναβαθμίσει την ποιότητα του ήχου του. 

80 €

Audio Technica VM740ML

Dual Moving Magnet Stereo Cartridge A high-end model featuring a MicroLine™ stylus in an aluminium die-cast alloy body. In addition to outstanding high-frequency reproduction, this model enables clear sound image localisation. Aluminium tapered cantilever Para-toroidal coils improve generating efficiency Centre shield plate between the left and right channels reduces crosstalk Die-cast aluminium alloy housing reduces vibration and adds a natural electrical shield Audio-Technica’s internationally-patented Dual Magnet design replicates the structure of the cutter head. Instead of using a single, large magnet, the two magnets are arranged in the shape of a "V". The two magnets are positioned precisely to match the positions of the left and right channels in the stereo groove walls. Consequently, the VM design ensures outstanding channel separation, extended frequency response and superb tracking. Para-toroidal generating system Para-toroidal coils improve generating efficiency and offer superb linearity since leakage of magnetic flux in this continuous and unitised magnetic circuit is low. Permeability of the cores is also optimised through the use of laminated cores. Centre shield plate reduces crosstalk A permalloy centre shield plate enables the effective separation of left and right channels, suppressing electrical crosstalk to below 40dB. This is similar to the actual crosstalk value found in the grooves of the record itself. Χαρακτηριστικά : Τύπος: VM Dual Magnet Πηνία: τύπου paratoroidal με PCOCC Cantilever: Aluminium Tapered Pipe Τύπος ακίδας: Nude MicroLine® 2.2 x 0.12 mil Έξοδος: 4.0mV Απόκριση Συχνότητας: 20Hz -27KHz Διαχωρισμός καναλιών: 28 dB Ισορροπία καναλιών: 1.0 dB Βάρος Ανάγνωσης: 1.8-2.2 g (2.0 g standard) Συνιστώμενη Αντίσταση: 47 KΩ Στατική Ενδοτικότητα: 40 x 10-6 cm/dyne Δυναμική Ενδοτικότητα: 10 x 10-6 cm/dyne Βάρος: 8.0 gr Το προϊόν φέρει ταινία γνησιότητας του εργοστασίου. Made in Japan

339 €

Audio Technica VM540ML

The VM540ML MicroLine® stylus cartridge is the premier 500 Series model in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM540ML is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s MicroLine® stylus allows it to trace the record groove with incredible accuracy, resulting in nuanced audio reproduction that elliptical and conical styli simply can’t match. The stylus’s multilevel shape also wears better than other styli, while reducing the wear on your records. Includes mounting hardware. Χαρακτηριστικά:Frequency Response: 20-27,000 HzChannel Separation: 28 dB (1 kHz)Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)Stylus Construction: Nude square shankRecommended Load Impedance: 47,000 ohmsOutput: 4.0 mV (at 1 kHz, 5 cm/sec)Channel Balance: 1.0 dB (1 kHz)Stylus Shape: 2.2 x 0.12 mil MicroLine®Cantilever: Aluminum tapered pipeMount: Half-inchReplacement Stylus: VMN40M

269 €

Nagaoka MP-200

Η Nagaoka MP-200 προσφέρει υψηλή ευκρίνεια, λεπτομέρεια και εξαιρετική δυναμική περιοχή καθώς κατατάσσεται στις κορυφαίες κεφαλές στη κατηγορία τιμής της.Χαρακτηριστικά:Superfine polished special eliptical diamond stylusPowerfull samarium cobalt magnetHardened low-mass, tapered aluminum alloy cantilever for very high fidelityCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingΠροδιαγραφές:Type: Moving magnetCantilever: High-strength BoronStylus type: Superfine elliptical diamondWeight: 6.5 gOutput voltage: 1kHz,5cm/sec: 4mVFrequency response: 20Hz-23kHzChannel balance: 1kHz: > 1.5dBChannel separation: 1kHz: > 25dBRecommended loading: 47k ohmsDynamic compliance: 7.2 x 10-6 cm/dyneStatic compliance: 20 x 10-6 cm/dyne Tracking force range: 1.5 - 2.0 g

489 €

Nagaoka MP-300

The Nagaoka MP-300 phonograph cartridge offers sophistication, refinement and high-definition at all audible frequencies thus making it one of our favorite phonograph cartridges. It is nimble on the grooves and easy on the ears so you keep on wanting to listen. The Nagaoka MP300 is an advanced technology cartridge that is destined to become a classic out of the box.Χαρακτηριστικά:Exclusive super rigid body for ultra resonance and superb fidelitySuperfine polished special eliptical bonded diamond stylusPowerfull samarium cobalt magnetHardened low-mass, high strenght boron cantileverCarbon fibre reinforced plastic shoeAnti ferro magnetic permalloy shield casingΠροδιαγραφές:Output voltage: 3mVFrequency response: 20 to 25,000HzChannel separation: 27dBChannel balance: 1.0dB or lessLoad resistance: 47K ohmsCantilever: boronStylus tip: 0.4 x 0.7 mil, diamondStylus pressure: 1.3 to 1.8gCartridge weight: 8gHeadshell weight: 13.5g

780 €

Ortofon 2M Black

Κεφαλή ΜΜ(κινητού μαγνήτη)Προδιαγραφές:Output voltage at 1000 Hz, 5cm/sec.5 mVChannel balance at 1 kHz1 dBChannel separation at 1 kHz26 dBChannel separation at 15 kHz15 dBFrequency range at - 3dB20-31.000 HzFrequency response20-20.000 + 2 / - 0 dBTracking ability at 315Hz at recommended tracking force80 µmCompliance, dynamic, lateral22 µm/mNStylus typeNude ShibataStylus tip radiusr/R 6/50 µmTracking force range1,4-1,7g (14-17 mN)Tracking force, recommended1,5 g (15 mN)Tracking angle20°Internal impedance, DC resistance1,2 kOhmInternal inductance630 mHRecommended load resistance47 kOhmRecommended load capacitance150-300 pFCartridge colour, body/stylusBlack/BlackCartridge weight7,2 g 

599 €

Ortofon 2M Blue

Κεφαλή ΜΜ(κινητού μαγνήτη)Προδιαγραφές:Output voltage at 1000 Hz, 5cm/sec.5,5 mVChannel balance at 1 kHz 1,5 dBChannel separation at 1 kHz25 dBChannel separation at 15 kHz15 dBFrequency range at - 3dB20-25.000 HzFrequency response20-20.000 Hz + 2 / - 1 dBTracking ability at 315Hz at recommended tracking force80 µmCompliance, dynamic, lateral20 µm/mNStylus typeNude EllipticalStylus tip radiusr/R 8/18 µmTracking force range1,6-2,0g (16-20 mN)Tracking force, recommended1,8 g (18 mN)Tracking angle20°Internal impedance, DC resistance1,3 kOhmInternal inductance700 mHRecommended load resistance47 kOhmRecommended load capacitance150-300 pFCartridge colour, body/stylusBlack/BlueCartridge weight7,2 g 

209 €

Ortofon 2M Red

Με την 2M Red η μουσική ζωντανεύει και γίνεται αληθινή σαν να παίζουν οι μουσικοί στο δωμάτιο σου!Προσφέρει ελλειπτική κεφαλή, μεγάλη έξοδο 5.5 mv ώστε να είναι συμβατή με όλους τους προενισχυτές phono και σχήμα που της επιτρέπει να προσαρμόζεται σε όλα τα πικάπ της αγοράς. Παρά την προσιτή τιμή, χαρακτηρίζεται απο έναν ήχο με μεγάλη ακρίβεια, ανοικτό, δυναμικό και με ζεστασιά!

109 €

Grado Prestige Gold 3

Mellow YellowBoth the Silver3 and Gold3 use a four piece OTL cantilever with a Grado specific elliptical diamond stylus mounted on a brass bushing. With the Silver3 and Gold3, a machined turned generator is used to achieve a lower distortion and greater transparency. The Gold3 are hand selected from Silver3 production runs which meet higher test specifications. Approximately 5% of the run usually exhibits these specs and become a Gold3.Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system.This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.The Silver3 & Gold3 are all hand assembled by our team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, we were able to have a trickle down of technology and bring a new technique to the Silver3 & Gold3. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Our coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.As in all Grado phono cartridges the Silver3 & Gold3 are powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Silver3 & Gold3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.The development of the Epoch in the Lineage Series gave us an in-depth experience with using an outer housing as a damping device. This led to the creation of a process which de-stresses the chassis and dissipates unwanted energy & resonant frequencies, allowing the desired signal to travel freely.

338 €