Βελόνες Πικάπ

Replacement stylus Nagaoka MP-110 JN-P110, Tonar article 6821 Cantilever: aluminum alloyStylus: 0.4 x 0.7 Mil bonded elliptical diamond stylus tip

Η AudioTechnica Stylus AT-VMN95ML ειναι βελονα microlinear αντικαταστασης η αναβαθμισης (replacment / upgrade stylus) για κεφαλες σειρας VM95.

Ανταλλακτική βελόνα για την κεφαλή AT-XP7

AT-VMN95C0.6 mil conical replacement stylus for these cartridges: AT-VM95C

ATN-XP30.6 mil conical replacement stylus for these cartridges: AT-XP3

Ανταλλακτική βελόνα για την κεφαλή 2M Bronze.

Physically 2M styli will fit on alternative 2M cartridges bodies, but 2M Series cartridges’ engines, coils and magnets configurations are not quite identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. 2M Silver phono cartridge is an OEM (Original Equipment Manufacturer) model that takes most of the characteristics of the 2M Red. 2M Silver's special feature is silver plated copper coils, the same coil wire material as in the 2M Bronze and Black models, with a reduced number of windings. Frequency range - 20-22.000 Hz  Frequency response - 20-20.000 Hz + 3 / - 1 dB  Tracking ability at 315Hz at recommended tracking force *) - 70 µm  Compliance, dynamic, lateral - 20 µm/mN  Stylus type - Elliptical  Stylus tip radius - r/R 8/18 µm  Equivalent stylus tip mass - 0.5 mg  Tracking force range - 1.6-2.0 g (16-20 mN)  Tracking force, recommended - 1.8 g (18 mN)  Tracking angle - 20°

Ανταλλακτική βελόνα για την κεφαλή AT-XP5. Αναβάθμιση για την κεφαλή AT-XP3. Συμβατή με τις κεφαλές ΑΤ-ΧΡ3 και AT-XP7. Το προϊόν φέρει ταινία γνησιότητας του εργοστασίου. Handmade in Japan.

The CLUB boasts the best specifications and best sound, making it an ideal choice for Club DJs in any environment: studio, broadcast or club.The CLUB features a Special-Elliptic stylus that allows for detailed sound quality: Special-Elliptic stylus fits better in the groove and therefore has more contact area with the groove itself, extracting more intricate details, than is possible with a spherical diamond.The CLUB’s 8 mV output voltage requires less gain from the preamps, providing cleaner sound reproduction and less susceptibility to feedback in live environments.The CLUB offers an outstanding platform for archival and sampling.

The Concorde ELITE is a premium Moving Magnet cartridge, based on the legacy of the Ortofon Concorde MkII Series. Owing to the number of components' upgrades, the ELITE achieves a new level of sound quality, not previously found in the DJ categorized cartridges.

Χειροποίητη ανταλλακτική βελόνα για την κεφαλή VM670SP Το προϊόν φέρει ταινία γνησιότητας του εργοστασίου.

Χειροποίητη ανταλλακτική βελόνα για την κεφαλή VM760SLC Το προϊόν φέρει ταινία γνησιότητας του εργοστασίου. Made in Japan

Χειροποίητη ανταλλακτική βελόνα για την κεφαλή VM750SH.

Χειροποίητη ανταλλακτική βελόνα για τις κεφαλές VM740ML και VM540ML. Το προϊόν φέρει ταινία γνησιότητας του εργοστασίου. Made in Japan

Χειροποίητη ανταλλακτική βελόνα για την κεφαλή VM530ENΤο προϊόν φέρει ταινία γνησιότητας του εργοστασίου. Made in Japan

Χειροποίητη ανταλλακτική βελόνα για την κεφαλή VM520EB. Το προϊόν φέρει ταινία γνησιότητας του εργοστασίου. Made in Japan.

Χειροποίητη ανταλλακτική βελόνα για τις κεφαλές VM510CB και VM610Mono, επίσης μπορειίται να την ταιριάξεται μόνιμα ή προσωρινά (έως να μπορέσετε να αποκτείσετε την αντίστοιχη) με όλες τις κεφαλές της σειράς VM. Το προϊόν φέρει ταινία γνησιότητας του εργοστασίου. Made in Japan

Aνταλλακτική βελόνα για την κεφαλή ΑΤ85EP. Hand Made in Japan Το προϊόν φέρει ταινία γνησιότητας του εργοστασίου. Αναβάθμιση με τις κεφαλές AT81CP, AT300P, AT3482P. 

Aνταλλακτική βελόνα για το πικάπ DP-29.

Ανταλλακτική βελόνα για την κεφαλή AT5V

Χειροποίητη ανταλλακτική βελόνα 78 rpm για την μονοφωνική κεφαλή AT-VM95SP Συμβατή και με τις κεφαλές AT-VM95C, AT-VM95Ε, AT-VM95EN, AT-VM95ML, AT-VM95SH. Το προϊόν φέρει ταινία γνησιότητας του εργοστασίου.

Χειροποίητη ανταλλακτική βελόνα για την κεφαλή AT-VM95SH.

Χειροποίητη ανταλλακτική βελόνα για την κεφαλή AT-VM95EN

ATN95Ex χειροποίητη ανταλλακτική βελόνα για την κεφαλή AT95Ex. Πρόκειται για την αναβάθμιση της κεφαλής AT95Ε. Το προϊόν φέρει ταινία γνησιότητας του εργοστασίου.

Βελόνα αντικατάστασης για κεφαλή AT91R. Με Πλαίσιο από κράμα αλουμινίου για τη συλλογή μικρο λεπτομερειών από το αυλάκι του δίσκου βινυλίου. Με κωνική γραφίδα-διαμάντι.

Replacement stylus for AT91 cartridge. The ATN91 is also compatible stylus for CN5625AL and AT90 discontinued cartridges. The ATN91 is also upgrade replacement styli for AT3600L. The tracking force of AT3600L equipped with ATN91 is 2g, do not upgrade from ATN3600L to ATN91 when your tonearm does not allowed tracking force adjustment.

ATN81CP  Replacement stylus for AT81CP cartridge Replacement stylus for AT81CP Conical Stylus Bonded Round Shank Construction Tracking force: 1.0 to 1.5 g (1.25 g standard)

Physically 2M styli will fit on alternative 2M cartridges bodies, but 2M Series cartridges’ engines, coils and magnets configurations are not quite identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. 2M Silver phono cartridge is an OEM (Original Equipment Manufacturer) model that takes most of the characteristics of the 2M Red. 2M Silver's special feature is silver plated copper coils, the same coil wire material as in the 2M Bronze and Black models, with a reduced number of windings. Frequency range - 20-22.000 Hz  Frequency response - 20-20.000 Hz + 3 / - 1 dB  Tracking ability at 315Hz at recommended tracking force *) - 70 µm  Compliance, dynamic, lateral - 20 µm/mN  Stylus type - Elliptical  Stylus tip radius - r/R 8/18 µm  Equivalent stylus tip mass - 0.5 mg  Tracking force range - 1.6-2.0 g (16-20 mN)  Tracking force, recommended - 1.8 g (18 mN)  Tracking angle - 20°

Χειροποίητη ανταλλακτική βελόνα για την κεφαλή AT-VM95E Συμβατή και με τις κεφαλές AT-VM95C, AT-VM95EN, AT-VM95ML, AT-VM95SH, AT-VM95SP

Ανταλλακτική βελόνα για την κεφαλή AT95E

Ανταλλακτική βελόνα για τις Ortofon Super OM 10, OM 10, OMP-mount 10, OMBulk 10, OMT 10, LM 10, Concorde 10, Concorde EC 10, Concorde STD, TM 10H, LMB 12, SMB 12, LMA 12. Frequency range: 20-24.000 Hz Frequency response: 20-20.000 Hz + 3 / - 1 dB Tracking ability at 315Hz at recommended tracking force*): 70 µm Compliance, dynamic, lateral: 25 µm/mN Stylus type: Elliptical Stylus tip radius: r/R 8/18 µm Tracking force range: 1.25-1.75 g (12.5-17.5 mN) Tracking force, recommended: 1.5 g (15 mN) Tracking angle: 20° Stylus colour: Black

Phono cartridge for turntables Audiophile vinyl enjoyment because pure silver offers crystal clear performance!2M series uses Ortofons own technology, that allows to reach same levels of flat frequency response than Moving Coil cartridges. 2M Silver combines these technologies with ultimate simple mounting procedure for nearly all available turntables. Due to MM principle, 2M cartridges are compatible with most phono preamplifiers. An absolutely feature unique in this price range, 2M Silver uses internal silver plated copper coils, which guarantees outstanding sonic results! Features : Moving Magnet principle Silver plated copper coils windings to achieve higher quality and more dynamic playback compared with conventional MM cartridges Suitable for low to medium tonearm masses 1/2 inch mounting standard High trackability 2M Silver should be connected to phono MM inputs As with most MM cartridges, stylus may be exchanged Specifications : Weight 7.2 g Stylus type elliptical Stylus tip radius 8 x 18 µm Frequency response 20 - 25.000 Hz Output voltage 5.5 mV Channel separation >25dB @ 1kHz Compliance dynamic/lateral 20/20 µm/mN Auflagekraftbereich 1.6-2,0 g Recommended tracking force 1.8 g Trackability (315 Hz, lateral) >70 µm Tracking angle 20° Internal inductance 700 mH Recommended load resistance 47 kΩ

The OM 5S is a moving magnet cartridge for general purpose applicationIf your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate. If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5 g. Styli types and interchangeabilityBy adopting a wide range of replacement styli, the OM 5 Series can provide an optimum match for your home system, application and budget. In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Specifications : Output voltage at 1000 Hz, 5cm/sec. - 4.5 mV Channel balance at 1 kHz - 2 dB Channel separation at 1 kHz - 20 dB Channel separation at 15 kHz - 12 dB Frequency range at - 3dB - 20-20.000 Hz Frequency response - 20-22.000 Hz Tracking ability at 315Hz at recommended tracking force *) - 60 µm Compliance, dynamic, lateral - 20 µm/mN Stylus type - Spherical Stylus tip radius - R 18 µm Tracking force range - 1.5-2.0 g (15-20 mN) Tracking force, recommended - 1.75 g (17.5 mN) Tracking angle - 20° Internal impedance, DC resistance - 750 Ohm Internal inductance - 450 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-500 pF Cartridge colour, body/stylus - Black/Black Cartridge weight incl. extra weight - 5 g Cartridge weight excl. extra weight - 2.5 g

The Super OM 5E major improvements: 1. By means of computer simulations it has been possible to define the natural pivot point of the system with unprecedented accuracy while achieving an optimum oscillation balance. The result: improved linearity, higher channel separation and reduced distortion. 2. Slit less than 1 mm dia. hollow pole pins significantly reduces eddy current losses caused by magnetic hysteresis. This technology extends the frequency range and improves phase linearity. 3. OM Super 5 cartridge body is manufactured from a Noryl (plastic & glass compound) which ensures high rigidity and freedom from resonances. Optimal fit and sound reproductionIf your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon's answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate. If your tonearm is an standard tonearm, just leave the weight-plate. If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g. Super OM 5E features Elliptical stylus that provides balanced and distortion-free playback. Elliptical diamonds are able to follow the groove oscillations more accurately than spherical diamonds due to their contoured shape. This results in better tracking and less distortion. Styli types and interchangeabilityThe OM 5s features a Spherical diamond. Spherical diamonds are the simplest and most robust diamonds. The OM 5E and Super OM 5E feature an Elliptical diamond. In the development of OM cartridges, a major objective was to provide the music lover with the opportunity to optimize sound reproduction without having to replace the entire cartridge. Instead of being merely intended for replacement purposes following wear or damage, the OM 5 Series allows you to step up to better sound by simply upgrading the stylus. Specifications : Output voltage at 1000 Hz, 5cm/sec. - 4 mV Channel balance at 1 kHz - 1.5 dB Channel separation at 1 kHz - 22 dB Channel separation at 15 kHz - 15 dB Frequency range at - 3dB - 20-25.000 Hz Frequency response - 20-20.000 Hz ± 2 dB Tracking ability at 315Hz at recommended tracking force - 65 µm Compliance, dynamic, lateral - 20 µm/mN Stylus type - Elliptical Stylus tip radius - r/R 8/18 µm Tracking force range - 1.5-2.0 g (15-20 mN) Tracking force, recommended - 1.75 g (17.5 mN) Tracking angle - 20° Internal impedance, DC resistance - 1 kOhm Internal inductance - 580 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-500 pF Cartridge colour, body/stylus - Black/Black Cartridge weight incl. extra weight - 5 g Cartridge weight excl. extra weight - 2.5 g

Specifications : Frequency range at -3dB - 20-20.000 Hz Frequency response - 20-22.000 Hz Tracking ability at 315Hz at recommended tracking force *) - 60 µm Compliance, dynamic, lateral - 20 µm/mN Stylus type - Spherical Stylus tip radius - R 18 µm Tracking force range - 1.5-2.0 g (15-20 mN) Tracking force, recommended - 1.75 g (17,5 mN) Tracking angle - 20° Stylus colour - Black

Replacement stylus for Audio-Technica AT3600L cartridge. This ATN3600L styli is compatible with the following cartridges: AT3600 - AT3600L - AT3601 - AT3651 - AT3650L - AT3650C - AT3650 - AT3626This is also the replacement stylus for turntable models Audio-Technica LP60USB and LP60.  

Perfect for usage in discotheques and clubs: provides the best possible sound quality available in a DJ cartridge! Designed to commemorate the release of the limited edition Technics SL-1200LTD and SL-1200GLD, the Concorde Gold was made to compliment the attractive stylings of these limited edition turntables and to provide the best possible sound quality available in a DJ cartridge. Compatible to a very wide range of turntables. Using the cartridge for the first time feels like striking gold. It is indeed the flagship product with its gold plating and special Pro E diamond. The Gold enjoys an excellent reputation for its amazing sound quality. Available only with an elliptical stylus, the Concorde Gold is for DJs who will settle for nothing but the very best!Χαρακτηριστικά:Output voltage at 1000Hz, 5cm/sec. -   6 mVChannel balance at 1kHz  -  1,5 dBChannel separation at 1kHz  -  23 dBChannel separation at 15 kHz  -  15 dBFrequency range at -3dB  -  20-22.000 HzFrequency response  -  20-20.000 Hz +/- 2dBTracking ability at 315 Hz at recommmended tracking force  -  80 μmCompliance, dynamic lateral  -  7 μm/m NStylus type -   Special EllipticalStylus tip radius -   r/R 13/25 μmTracking force range  -  2,0-5,0 g (20-50 mN)Tracking force recommended  -  3,0 g (30 mN)Tracking angle  -  20°Internal impedance, DC resistance -   750 OhmInternal inductance  -  450 mHRecommended load resistance  -  47 kOhmRecommended load capacitance  -  200-600 pFCartridge weight  -  18,5 g​

The Pro S has a spherical diamond stylus which minimizes scratching and a solid cantilever which can survive hectic activity at the turntable.No matter what the application, the Pro S provides remarkable versatility for virtually any setting. The sound quality is absolutely not to worry about.