Audio Technica AT4051b

Ideal for professional recording and critical applications in broadcast, this versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. Its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).

The AT4051b consists of two modular subassemblies: an AT4900b-48 body and an AT4051b-EL cardioid head capsule (both available separately). Additional interchangeable capsules are available in omnidirectional (AT4049b-EL) and hypercardioid (AT4053b-EL).

Specifications:

• Element: Externally polarized (DC bias) capacitor

• Polar Pattern: Cardioid

• Frequency Response: 20-20,000 Hz

• Low Frequency Roll-Off: 80 Hz, 12 dB/octave

• Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa

• Impedance: 50 ohms

• Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)

• Noise: 16 dB SPL

• Dynamic Range (Typical): 129 dB, 1 kHz at Max SPL

• Signal-To-Noise Ratio: 78 dB, 1 kHz at 1 Pa

• Phantom Power Requirements: 48V DC, 4.8 mA typical

• Switch: Flat, roll-off; 10 dB pad (nominal)

• Weight: 126 g (4.4 oz)

• Dimensions: 155.0 mm (6.10") long, 21.0 mm (0.83") maximum body diameter

• Output Connector: Integral 3-pin XLRM-type

• Optional Interchangeable Elements (sold separately):

• AT4049b-EL (Omnidirectional);

• AT4053b-EL (hypercardioid)

• Accessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case

• Audio-Technica Case Style: S1