Audio Technica

Audio Technica  AT8459Dual swivels provide unlimited number of positions for exact microphone placementCompatible with 5/8"-27 threaded standsFor use with any microphone using a stand clamp

Audio Technica  AT8418Rubber-grip spring clamp holds mic securely to instrument without marring the finishFlexible boom permits aiming the microphone in any directionCable strain relief reduces cable-transmitted noise and cable damage16cm long in total (8cm long gooseneck part)

The Audio Technica ATW-1101 package includes a beltpack transmitter and a receiver, and is applicable to headset or lavalier wireless users, as well as guitarists. It comes with the ATW-R1100 receiver and ATW-T1001 UniPak transmitter.Audio-Technica’s System 10 is a digital high-fidelity wireless system designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display.System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.Specifications:Overall system specificationsOperating Frequencies: 2.4 GHz ISM bandDynamic Range: >109 dB (A-weighted), typicalTotal Harmonic Distortion:

The Audio Technica ATW-1102 package includes ahandheld dynamic microphone.transmitter and a receiver. It comes with an ATW-R1100 receiver and ATW-T1002 handheld dynamic unidirectional microphone/transmitter. Includes AT8456a Quiet-Flex stand clamp.Audio-Technica’s System 10 is a digital high-fidelity wireless system designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display.System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space.Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.Specifications:Overall system specificationsOperating Frequencies: 2.4 GHz ISM bandDynamic Range: >109 dB (A-weighted), typicalTotal Harmonic Distortion:

The Audio Technica ATW-T1001 System 10 Wireless Body Pack is designed for use with the System 10 wireless system. Audio-Technica's System 10 is a digital high-fidelity wireless system designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display. Specifications: RF Power Output: 10 mW Spurious Emissions: Following federal and national regulations Input Connections: Four-pin Locking Connector Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +9V Batteries: Two 1.5V AA (not included) Battery Life: >7 hours (alkaline) - Depending on battery type and use pattern Dimensions (W x H x D): 2.76 x 4.21 x 0.98 inches Net Weight: 3.5 oz. (without batteries)

The ATW-T310b wireless UniPak body-pack transmitter has both low and high impedance inputs plus a 5V DC bian connection allowing it to be used with condenser and dynamic microphones, as well as Hi-Z instrument pickups. The locking 4-pin HRS-type audio input connector is recessed to protect the connection from damage. Operating on two standard AA batteries, the transmitter features high and low-level RF output settings. The low-level setting allows two additional hours of bttery life while retaining a strong RF signal link. Soft-touch controls provide convenient access to a variety of functions including: RF power, audio input level, power/mute locks and frequency selection. Each transmitter’s backlit LCD display presents a great deal of setup and operating information clearly and conveniently including battery fuel remaining, mute, and operating frequency. A flashing “Lo-Batt” alert visually signals the battery life is almost depleted. A dual-colour status LED illuminates green when power is on, and red when the transmitter is muted. Programmable power/mute locks limit the functioning of the transmitter’s power/mute button as desired for particular users and applications. To match the audio input level to the transmitter, a four-position audio input gain setting selected through the function menu is provided. The body-pack transmitter features a safety cover to protect the soft-touch controls from being accidentally activated and a recessed input connector to increase the life of the microphone cable. Constructed of high impact materials, the body-pack transmitter features a field replaceable whip antenna and captive locking battery cover door.Specifications:RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohmsSpurious Emissions: Following federal and national regulationsInput Connection: Four-pin Locking Connector, Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +5VBatteries: Two 1.5V AA, not includedBattery Life: High: 6 hours (alkaline), Low: 8 hours (alkaline). Depending on battery type and use pattern.Dimensions: 66.0 mm W x 24.0 mm D x 87.0 mm HNet Weight: 81 g without batteries

Including AT8456a stand clamp. The same element as AE5400 (using the large-diaphragm element as in the AT4050).Two hundred selectable channels are offered in each of two available UHF bands. Dual Compander circuitry processes high and low frequencies separately for unmatched audio quality. Advanced digital Tone Lock squelch effectively blocks stray RF; the digitally encoded tone also communicates transmitter data for receiver display The AEW-T5400 transmitter offer rugged, ergonomic metal bodies, programmable features, soft-touch controls, and 10 mW/35 mW switchable RF power.Specifications:RF Power Output: High: 35 mW  Low: 10 mW, nominalSpurious Emissions: According to National RegulationsDynamic Range: >=110 dB, A-weightedMicrophone Element: Cardioid CondenserBatteries: Two 1.5V AA alkaline (not included)Current Consumption: High: 185 mA; Low: 165 mA, typicalBattery Life: Approximately 6 hours (High); 8 hours (Low), depending on battery type and use patternDimensions: 239 mm long, 50 mm diameterNet Weight: 285g

The Audio Technica ATW-T1002 System 10 Wireless Handheld Microphone is designed for use with the System 10 wireless system. Audio-Technica's System 10 is a digital high-fidelity wireless system designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display. Specifications:RF Power Output: 10 mWSpurious Emissions: Following federal and national regulationsBatteries: Two 1.5V AA (not included)Battery Life: >7 hours (alkaline) - Depending on battery type and use patternDimensions: 10.03 inches long, 1.97 inches diameterNet Weight: 9.9 oz. (without batteries)Accessory Included: AT8456a Quiet-Flex stand clamp

Audio Technica AT8449.Attenuates noise, shock and vibration transmitted through mic stands, booms and mountsCompatible with 3/8"-16 and 5/8"-27 threaded standsDesigned to be used with the following Audio-Technica models: AT4033, AT4040, and AT4050

Audio Technica  AT8458.Attenuates noise, shock and vibration transmitted through mic stands, booms and mountsCompatible with 3/8"-16 and 5/8"-27 threaded standsDesigned to be used with the following Audio-Technica models: AT2020, AT2020 USB, AT2035, AT2050, AT3035, AT3060

Audio Technica  AT8410a.Attenuates noise, shock and vibration transmitted through mic stands, booms and mountsSpring-clip fits most tapered and cylindrical microphonesPermits easy microphone insertion and removal without detaching mic cableCompatible with 5/8"-27 threaded stands

Designed for broadcast and professional recording, Audio-Technica's BP4025 stereo condenser offers large-diaphragm capsules in an innovative coincident capsule configuration. This allows for a smaller housing while producing an X/Y stereo image with the spatial impact and realism of a live sound field. Ideal for use with professional audio and video equipment, the microphone is fully RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).Specifications:Element: Fixed-charge back plate permanently polarized condenserPolar Pattern: X/Y StereoFrequency Response: 20-17,000 HzLow Frequency Roll Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 PaChannel Balance:

The Audio-Technica AT8022 is a stereo microphone that is ideal for use mounted on a video camera. Now get true stereo field recording at interviews and when recording at home. Audio-Technica's versatile AT8022 stereo condenser offers a compact housing and the pristine sound quality of a live sound field. Its coincident capsule configuration produces an X/Y stereo image in a small housing. The microphone is supplied with two cables for use with either pro or consumer gear. It offers switchable low-frequency roll-off and the convenience of battery or phantom power. The Audio-Technica AT8022 Stereo Microphone is fully RoHS-compliant—free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).Features:Innovative capsule configuration produces accurate stereo image in smaller housingCompact, lightweight design is perfect for video camera-mount use as well as for stereo field recording, interviews and home recordingIdeal for use with handheld digital recording devicesOperates on battery or phantom power—for use with pro or consumer equipmentSwitchable low-frequency roll-offIncludes two cables: one balanced (two 3-pin XLRM-type connectors at output); one unbalanced (3.5 mm TRS at output)RoHS-compliant — free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)Specifications:Element: Fixed-charge Back Plate Permanently Polarized CondenserPolar Pattern: X/Y StereoFrequency Response: 20-15,000 HzLow Frequency Roll-Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity:Phantom: -34 dB (19.9 mV) re 1V at 1 PaBattery: -34 dB (19.9 mV) re 1V at 1 PaImpedance:Phantom: 250 ohmsBattery: 300 ohmsMaximum Input Sound Level:Phantom: 128 dB SPL, 1 kHz at 1% T.H.D.Battery: 120 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range (Typical):Phantom: 109 dB, 1 kHz at Max SPLBattery: 101 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 75 dB, 1 kHz at 1 PaPhantom Power Requirements: 11-52V DC, 2 mA typicalBattery: 1.5V AA/UM3Battery Current/Life: 0.7mA / 700 Hours TypicalSwitch: Battery On/Off; Flat, Roll-offWeight: 247 g (8.7 oz)Dimensions: 186.0 mm (7.32") long, 47.6 mm (1.87") head diameter, 21.0 mm (0.83") maximum body diameterOutput Connector: Integral 5-pin XLRM-typeCables:Balanced: 2.0 m (6.5') long, 8 conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end;Unbalanced: 0.6 m (2.0') long stereo cable with 5-pin XLRF-type connector at microphone end and 3.5 mm TRS connector at output endAccessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; battery; soft protective pouchAudio-Technica Case Style: S12

Capture the realism of live sound with two mics in one. The ATR6250 provides extremely affordable, high-quality stereo pickup in a single microphone. Its compact design is ideal for use with video cameras and portable audio recorders. Provided with a range of professional accessories, this price/performance leader is ruggedly built to endure the realities of day-to-day use. Specifications:Element: Stereo CondenserPolar Pattern: Dual cardioidFrequency Response: 70 – 18,000 HzOpen Circuit Sensitivity: -50 dBImpedance: 600 ohmsWeight: 79 g (2.8 oz) without cableOutput Connector: Screw-in 3.5 mm (1/8") stereo (female)Cable: Camera Cable: 0.2 m (8") long, 3.5 mm (1/8") stereo to 3.5 mm (1/8") stereo, Recording Cable: 3 m (9.8') long, 3.5 mm (1/8") stereo to two 3.5 mm (1/8") mono plugs

The PRO24-CMF camcorder microphone is a lightweight, compact stereo condenser ideal for digital recording with high-fidelity stereo sound. Equipped with a windjammer, accessory shoe and permanently attached coiled cable, the microphone features a pair of cardioid elements in an X-Y configuration to provide the spatial impact and realism of a live sound field. The microphone is designed for either battery operation or battery-free operation when used with camcorders that provide plug-in power at the mic input. Like all Audio-Technica mics, the PRO24-CM is rugged; it's built to endure the rigors of field production. Specifications:Polar Pattern: X/Y StereoFrequency Response: 100-17,000 HzOpen Circuit Sensitivity: -50 dB (3.1 mV) re 1V at 1 PaImpedance: 600 ohmsMaximum Input Sound Level: 119 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 82 dB, 1 kHz at Max SPLSignal to Noise Ratio: 57 dB, 1 kHz at 1 PaBattery Type: 1.5V LR44Battery Current Life: 0.6 mA / 200 hours typicalSwitch: On/offWeight: 3.9 oz (111 g)Dimensions: 4.59"" (116.5 mm) long, 0.83" (21.0 mm) maximum body diameterOutput Connector: 3.5 mm stereo mini plug on cableCable: Permanently attached 152.4 mm - 304.8 mm (6""-12"") coiled cable with right-angle molded 3.5 mm stereo mini-plug at output end

Based on models originally developed for use in the broadcast of the Sydney Games in 2000, the BP4027 (14.96" long) and BP4029 (9.29" long) Stereo Shotgun models are engineered for high-end broadcast and production use. Both microphones feature independent line-cardioid and figure-of-eight elements configured in an MS (Mid-Side) arrangement with switch-selectable internal matrixing. These innovative microphones allow sound recordists the choice of selecting a left-right stereo output (wide or narrow) via the microphone’s internal matrixing system or choosing discrete Mid-Side signals for later manipulation, a flexibility not available from any other manufacturer.A switchable low frequency roll-off filter helps minimize the pickup of unwanted low frequency noise. These phantom-powered models feature a rugged lightweight design and sleek black color scheme, perfect for on-camera use.

Crisp & intelligible pickup—far away or up close. In its “Tele” range setting, this cardioid condenser is engineered to pick up dialogue and sound effects at a distance, while bypassing ambient noise such as traffic, air-handling systems, room reverberation and mechanically coupled vibrations. Designed especially for use with video cameras. Specifications:Element: CondenserPolar Pattern: Normal: Cardioid, Tele: SupercardioidFrequency Response: 70 – 18,000 HzOpen Circuit Sensiyivity: Normal: -56 dB, Tele: -45 dBImpedance: Normal: 1,000 ohms, Tele: 2,200 ohmsWeight: 113 g (4 oz)Cable: 1 m (3') long, permanently attached cable with 3.5 mm (1/8") mini-plug

Ideal for interviews, pickup of audience reaction, and musical events. The AT8010 features an omnidirectional polar pattern that provides maximum ambient pickup. The microphone provides an extremely smooth, extended response on- and off-axis. Operates on battery or phantom power. Specifications:Element: Fixed-charge back plate permanently polarized condenserPolar Pattern: OmnidirectionalFrequency Response: 20-20,000 HzLow Frequency Roll Off: 80 Hz, 12 dB/OctaveOpen Circuit Sensitivity: Phantom: -44 dB (6.3 mV) re 1V at 1 Pa Battery: -45 dB (5.6 mV) re 1V at 1 PaImpedance: Phantom: 250 ohms Battery: 300 ohmsMaximum Input Sound Level: Phantom: 137 dB SPL, 1 kHz at 1% T.H.D. Battery: 123 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: Phantom: 113 dB, 1 kHz at Max SPL Battery: 99 dB, 1 kHz at Max SPLSignal to Noise Ratio: 70 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalBattery Type: 1.5V AA/UM3Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)Switch: Flat, roll-offWeight: 165 g (5.8 oz)Dimensions: 178.0 mm (7.01") long, 26.0 mm (1.02") head diameterOutput Connector: Integral 3-pin XLRM-type

Audio-Technica's AT8004L (9.43" long) is designed for on-location interviews/sports broadcasting. Its extended-length handle provides ample room for a microphone flag. The microphone offers exceptionally natural reproduction. Internal shock mounting minimizes handling/cable noise. The microphone's omnidirectional polar pattern is ideal for reproduction of surrounding ambience. Its rugged housing with hardened-steel grille stands up to field use. Also available as the shorter-length AT8004 (5.93" long).Specifications:Element: DynamicPolar Pattern: OmnidirectionalFrequency Response: 80-16,000 HzOpen Circuit Sensitivity: -51 dB (2.8 mV) re 1V at 1 PaImpedance: 300 ohmsWeight: 215 g (7.6 oz)Dimensions: 239.5 mm (9.43") long, 35.8 mm (1.41") head diameterOutput Connector: Integral 3-pin XLRM-type

The groundbreaking Audio-Technica AT4080 Microphone achieves coveted ribbon microphone sound while solving the fragility and low output problems that have historically plagued ribbon mics. Delivering the warm, smooth sound of a classic ribbon microphone, the handcrafted bidirectional AT4080 offers a robust build for long-lasting, reliable performance, as well as higher output for maximum compatibility with microphone preamplifiers.Equally at home in recording studios and live-sound settings, the AT4080 microphone boasts Audio-Technica's innovative MicroLinear ribbon imprint, which protects the dual ribbons from lateral flexing and distortion. The innovative AT ribbon transducer advances the evolution of ribbon microphone design. Other enhancements include powerful N50 neodymium magnets for high output level, ultra-fine mesh to protect the ribbon against damage, high-SPL capability, and extended frequency response. The bidirectional AT4080 ribbon mic's housing assembly is open acoustically to minimize unwanted internal audio reflections.Features:Smooth, warm and natural high-fidelity sound for professional recording, broadcast, and sound reinforcementGroundbreaking Audio-Technica ribbon design with 18 patents pendingProprietary MicroLinear ribbon imprint for superior durabilityInnovative dual ribbon construction for increased sensitivityExtremely powerful N50 neodymium magnets for high output levelUltra-fine mesh helps protect against ribbon damageClassic bidirectional (figure-of-eight) polar pattern picks up sounds equally from the front and back of the elementHigh-SPL capability and extended frequency responseExtended frequency response for natural audio reproductionAcoustic baffle system and extra large output transformer provide natural low-frequency response and extended dynamic rangeHandmade production — including ribbon corrugation, imprint, and assemblyOpen acoustical environment of the housing assembly minimizes unwanted internal reflectionsPhantom-powered active electronics provide stable impedance and higher output for maximum compatibility with microphone preamplifiersCustom shock mount provides superior isolationCertified by the METAlliance (Music Engineering and Technology Alliance)Specifications:Element; RibbonPolar Pattern: Figure-of-eightFrequency Response: 20-18,000HzOpen Circuit Sensitivity: —39dB (11.2 mV) re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 150dB SPL, 1kHz at 1% T.H.D.Noise: 22dB SPLDynamic Range (Typical): 128dB, 1kHz at Max SPLSignal-To-Noise Ratio: 72dB, 1kHz at 1 PaPhantom Power Requirements: 48V DC, 3.0 mA typicalWeight: 474g (16.7oz.)Dimensions: 177.5mm (6.99") long, 53.4mm (2.10") maximum body diameterOutput Connector: Integral 3-pin XLRM-type

The 910 PRO headphones are perfect for home musicians. These full-size closed back dynamic headphones feature Samarium Cobalt magnet and large diaphragm drivers. Audio-Technica technology combined with comfortable ear-pieces mean these 910 PRO headphones are an ideal choice for both home listening and studio monitoring applications.Specifications:Driver Diameter: 44mmMagnet: Samarium-cobalt magnetMaximum Input Power: 120 mW at - kHz Frequency Response: 20-22,000 HzSensitivity: 90 dBImpedance: 40 ohmsWeight: 205gConnector: Stereo jack 6.35 mmCable: 3 m (10')

As the most critically acclaimed model in the M-Series line, the ATH-M50 is praised by top audio engineers and pro audio reviewers year after year. Now, the ATH-M50xBL (White) professional monitor headphones feature the same coveted sonic signature, with the added feature of a detachable cable. From the large aperture drivers, sound isolating earcups and robust construction, the M50x provides an unmatched experience for the most critical audio professionals. Specifications:Type: Closed-back dynamicDriver Diameter: 45 mmMagnet: NeodymiumVoice Coil: CCAW (Copper-clad aluminum wire)Frequency Response: 15 - 28,000 HzMaximum Input Power: 1,600 mW at 1 kHzSensitivity: 99 dBImpedance: 38 ohmsWeight: 285 g (10 oz), without cable and connectorCable: Interchangeable cables: Detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable, detachable 3.0 m (9.8') straight cable and detachable 1.2 m (3.9') straight cableAccessories Included: Protective carrying pouch, 6.3 mm (1/4") screw-on adapter

Audio-Technica's AT875R is designed for video production and broadcast (ENG/EFP) audio acquisition. Audio-Technica's shortest shotgun microphone, it mounts conveniently on a DV camcorder without adding noticeable heft, and is ideal for use with compact digital cameras. This high-performance microphone offers a narrow acceptance angle of line + gradient design. It also features smooth, natural-sounding on-axis audio quality and excellent off-axis rejection of sound arriving from the sides and rear of mic.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: Line + gradientFrequency Response: 90-20,000 HzOpen Circuit Sensitivity: 30 dB (31.6 mV) re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 127 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 107 dB, 1 kHz at Max SPLSignal to Noise Ratio: 74 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalWeight: 80 g (2.8 oz)Dimensions: 175.0 mm (6.89") long, 21.0 mm (0.83") diameterOutput Connector: Integral 3-pin XLRM-type

The ATM450 cardioid condenser offers an innovative side-address stick design for endless placement options and minimal obstructions. The microphone is equipped with an integral 80 Hz hi-pass filter that provides easy switching from a flat frequency response to a low-end roll-off. Audio Technica ATM450 also features a switchable 10 dB pad that lowers the microphone's sensitivity, providing higher SPL capability for flexible use with a wide range of performers and system configurations. The condenser microphone's extended flat frequency response makes it ideal for high SPLs as well as for live and amplified acoustic instruments. Includes a professional isolation clamp to provide secure mounting, versatile positioning and effective dampening of unwanted mechanical noise. Features:Unique side-address stick design maximizes placement options with minimal obstructionsUncompromising sound quality for overheads, percussion, acoustic guitar, strings and other acoustic instrumentsIntegral 80 Hz HPF switch and 10 dB padDurable performance for professional applicationsCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceRugged, all-metal design and construction for years of trouble-free useIncludes isolation clamp for shock protection, secure mounting and easy positioningFixed-charge back plate permanently polarized condenserSpecifications:Polar pattern: CardioidFrequency response: 40-20,000 HzLow frequency roll-off: 80 Hz, 18 dB/octaveOpen circuit sensitivity: —41 dB (8.9 mV) re 1V at 1 PaImpedance: 200 ohmsMaximum input sound level: 152 dB SPL, 1 kHz at 1% T.H.D.Dynamic range (typical): 127 dB, 1 kHz at Max SPLSignal-to-noise ratio: 69 dB, 1 kHz at 1 PaPhantom power requirements: 11-52V DC, 3.5 mA typicalSwitches: Flat, roll-off; 10 dB padWeight: 98 g (3.5 oz)Dimensions: 126.9 mm (5.00") long, 21.0 mm (0.83") diameterOutput connector: Integral 3-pin XLRM-typeAccessories furnished: AT8471 isolation clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; windscreen; soft protective pouchAudio-technica S11 case

The Audio Technica AT897 is a short shotgun condenser microphone designed for audio capturing in video and broadcast applications. The microphone's unobtrusive length of 11" (279.40mm) ensures that the microphone remains out of the frame when mounted on compact, consumer video cameras.The microphone's narrow pick up pattern enhances signal reproduction when capturing audio at long range. Excellent off-axis sound rejection minimizes noise and ambiance, emphasizing the desired signal. A wide frequency response provides accurate sound reproduction of signals registering at various frequencies. A low-cut frequency switch eliminates noise and hum registering at the low frequency range. The microphone operates on a single 1.5v AA battery or 11V - 52V phantom power.

The AT2031 is the ideal microphone for stringed instruments in critical studio and live applications. Its permanently polarized element offers extended frequency response with a slight rise in the high frequency range for a more detailed sound. Its low self-noise and high SPL handling capability offer a wide dynamic range, perfectly suited for the most demanding applications. Specifications:Element: Fixed-charge back plate permanently polarized condenserPolar Pattern: CardioidFrequency Response: 20-20,000 HzLow Frequency Roll-Off: 150 Hz, 6 dB/octaveOpen Circuit Sensitivity: – 34 dB (19.9 mV) re 1V at 1 Pa*Impedance: 85 ohmsMaximum Input Sound Level: 141 dB SPL, 1 kHz at 1% T.H.D.Noise: 17 dB SPLDynamic Range: (typical) 124 dB, 1 kHz at max SPLSignal-to-Noise Ratio: 77 dB, 1 khz at 1 Pa*Phantom Power Requirements: 48V DC, 2mA typicalSwitches: Flat, roll-offWeight: (less accessories) 134 gDimensions: 143.0 mm long, 21.0 mm maximum body ØOutput Connector: Integral 3-pin XLRM-type

The PRO 37 has established itself as a versatile solution for studio recording and live performance. With a low-mass element for superb transient response and a low-profile design for optimal mic placement, this mic excels in high-SPL applications. It is ideal for acoustic guitar, overheads, piano and group vocals. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source. Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 30-15,000 HzOpen Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 PaImpedance: 200 ohmsMaximum Input Sound Level: 141 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range (typical): 112 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 65 dB, 1 kHz at 1 PaPhantom Power Requirements: 11-52V DC, 2 mA typicalWeight: 1.7 oz (49 g)Dimensions: 3.9" (99.0 mm) long, 0.83" (21.0 mm) maximum body diameterOutput Connector: Integral 3-pin XLRM-type

Ideal for general audio acquisition such as interviews, acoustic guitar, percussion, overheads, vocals and more, the AT8033 features high-SPL capability and wide frequency response. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source. The mic excels in both studio and stage applications. It operates on battery or phantom power.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 30-20,000 HzLow Frequency Roll Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: Phantom: -44 dB (6.3 mV) re 1V at 1 Pa Battery: 45 dB (5.6 mV) re 1V at 1 PaImpedance: Phantom: 250 ohms Battery: 300 ohmsMaximum Input Sound Level: Phantom: 137 dB SPL, 1 kHz at 1% T.H.D. Battery: 123 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: Phantom: 113 dB, 1 kHz at Max SPL Battery: 99 dB, 1 kHz at Max SPLSignal to Noise Ratio: 70 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalBattery Type: 1.5V AA/UM3Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)Switch: Flat, roll-offWeight: 159 g (5.6 oz)Dimensions: 194.2 mm (7.65") long, 26.0 mm (1.02") head diameterOutput Connector: Integral 3-pin XLRM-type

This premium electret condenser microphone is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. The AT4041 cardioid studio condenser microphone features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. A unique combination of audio excellence and moderate cost, the AT4041 is a rugged microphone housed in a case of turned brass with black chrome plating for durability and low reflectivity. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.

A price/performance leader, the MB 4k cardioid condenser microphone is the Midnight Blues Series' introductory studio-quality microphone. With a condenser design for studio vocal and instrument applications, the microphone features: battery/phantom operation; rugged all-metal construction; soft-touch finish; extended response for smooth, natural sonic characteristics; corrosion-resistant contacts from gold-plated XLRM-type connector; on/off switch. Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 80-20,000 HzOpen Circuit Sensitivity: Phantom: -46 dB (5.0 mV) re 1V at 1 Pa Battery: -48 dB (3.9 mV) re 1V at 1 PaImpedance: Phantom: 200 ohms Battery: 250 ohmsMaximum Input Sound Level: Phantom: 137 dB SPL, 1 kHz at 1% T.H.D. Battery: 125 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: Phantom: 113 dB, 1 kHz at Max SPL Battery: 101 dB, 1 kHz at Max SPLSignal to Noise Ratio: 70 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalBattery Type: 1.5V AA/UM3Battery Current Life: 0.4 mA/1200 hours typicalSwitch: On/offWeight: 6.4 oz (182 g)Dimensions: 8.10" (205.7 mm) long, 1.64" (41.7 mm) head diameterOutput Connector: Integral 3-pin gold-plated XLRM-type

The low-profile AT4022 omnidirectional condenser recording mic is outstanding for piano, acoustic guitar, and other acoustic instruments. With a flat, extended frequency response and wide dynamic range ideal for critical studio and live applications, the AT4022 handles high SPLs with ease. The microphone’s omnidirectional polar pattern preserves the “sound” of the recording location, delivers flat response and freedom from proximity effect. Its low-mass diaphragm improves transient response and reduces handling/mechanical noise transfer. Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: OmnidirectionalFrequency Response: 20-20,000 HzLow Frequency Roll-Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 PaImpedance: 250 ohmsMaximum Input Sound Level: 146 dB SPL, 1 kHz at 1% T.H.D.; 156 dB SPL, with 10 dB pad (nominal)Noise: 13 dB SPLDynamic Range (Typical): 133 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 81 dB, 1 kHz at 1 PaPhantom Power Requirements: 48V DC, 3.0 mA typicalSwitches: Flat, roll-off; 10 dB padWeight: 124 g (4.4 oz)Dimensions: 144.0 mm (5.67") long, 21.0 mm (0.83") maximum body diameterOutput Connector: Integral 3-pin XLRM-typeAccessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying caseAudio-Technica Case Style: S1

Ideal for professional recording and critical applications in broadcast, this versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. Its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).The AT4051b consists of two modular subassemblies: an AT4900b-48 body and an AT4051b-EL cardioid head capsule (both available separately). Additional interchangeable capsules are available in omnidirectional (AT4049b-EL) and hypercardioid (AT4053b-EL). Specifications:Element: Externally polarized (DC bias) capacitorPolar Pattern: CardioidFrequency Response: 20-20,000 HzLow Frequency Roll-Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 PaImpedance: 50 ohmsMaximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)Noise: 16 dB SPLDynamic Range (Typical): 129 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 78 dB, 1 kHz at 1 PaPhantom Power Requirements: 48V DC, 4.8 mA typicalSwitch: Flat, roll-off; 10 dB pad (nominal)Weight: 126 g (4.4 oz)Dimensions: 155.0 mm (6.10") long, 21.0 mm (0.83") maximum body diameterOutput Connector: Integral 3-pin XLRM-typeOptional Interchangeable Elements (sold separately):AT4049b-EL (Omnidirectional);AT4053b-EL (hypercardioid)Accessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying caseAudio-Technica Case Style: S1

This versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).The AT4053b consists of two modular subassemblies: an AT4900b-48 body and an AT4053b-EL hypercardioid head capsule (both available separately). Additional interchangeable capsules are available in omnidirectional (AT4049b-EL) and cardioid (AT4051b-EL). Specifications:Element: Externally polarized (DC bias) capacitorPolar Pattern: HypercardioidFrequency Response: 20-20,000 HzLow Frequency Roll-Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 PaImpedance: 50 ohmsMaximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)Noise: 16 dB SPLDynamic Range (Typical): 129 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 78 dB, 1 kHz at 1 PaPhantom Power Requirements: 48V DC, 4.8 mA typicalSwitch: Flat, roll-off; 10 dB pad (nominal)

With directivity equal to mics up to 50% longer, the AT4071a has been specially created to meet the critical long-distance pickup demands of broadcasting, film/TV sound, professional recording, wildlife recording and theater sound reinforcement. It is particularly useful for miking dynamic action in film/TV audio as well as in “spot” miking techniques in the music studio or theater. The mic provides extremely high output and a noise floor that is hardly measurable, much less audible. It may be used with confidence in distant miking applications and even under the stringent demands of modern digital recording systems. Audio-Technica has pioneered a unique interference tube design* in the AT4071a and AT4073a shotgun mics that provides the same directivity as mics up to 50 percent longer.Specifications:Element: Externally polarized (DC bias) condenserPolar Pattern: Line + gradientFrequency Response: 30-20,000 HzLow Frequency Roll-Off: 150 Hz, 12 dB/octaveOpen Circuit Sensitivity: -21 dB (89.1 mV) re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 124 dB SPL, 1 kHz at 1% T.H.D.Noise: 12 dB SPLDynamic Range (typical): 112 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 82 dB, 1 kHz at 1 PaPhantom Power Requirements: 11-52V DC, 3.2 mA typicalSwitch: Flat, roll-offWeight: 5.5 oz (155 g)Dimensions: 15.55" (395.0 mm) long, 0.83" (21.0 mm) diameterOutput Connector: Integral 3-pin XLRM-type

Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount.

The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more. Specifications:Element: Externally-polarized (DC bias) condenserPolar Patterns: Cardioid, Omnidirectional, Figure-of-EightFrequency Response: 20-20,000 HzLow Frequency Roll-Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: –42 dB (7.9 mV) re 1V at 1 Pa.Impedance: 120 ohmsMaximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D., 159 dB SPL, with 10 dB pad (nominal)Noise: 17 dB SPLDynamic Range (typical): 132 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 77 dB, 1 kHz at 1 PaPhantom Power Requirements: 11-52V DC, 4.7 mA typicalSwitches: Polar selection, Flat, roll-off, 10 dB pad (nominal)Weight: 412 g (14.5 oz)Dimensions: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameterOutput Connectors: Integral 3-pin XLRM-type

Exceptional low noise, wide dynamic range, and high SPL capability give the Audio-Technica AT4040 Large-Diaphragm Studio Condenser Mic studio versatility. Designed for professional recording, the AT4040 features an externally polarized true condenser designed with a technically advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics. Transformerless circuitry virtually eliminates low-frequency distortion. Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity. The open acoustical environment of the symmetrical housing minimizes unwanted internal reflections. Switchable 80Hz hi-pass filter and 10dB pad. Cardioid pattern. Includes shock mount and case. Requires phantom power.Features:Externally polarized true condenser designTechnically advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristicsExceptionally low noise, wide dynamic range, and high SPL capability give it studio versatilityTransformerless circuitry virtually eliminates low-frequency distortionSwitchable 80Hz hi-pass filter10dB padCardioid patternFrequency response: 20Hz-20kHzSpecifications:Element: Externally-polarized (DC bias) condenserPolar Pattern: CardioidFrequency Response: 20-20,000 HzLow Frequency Roll-Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.;155 dB SPL, with 10 dB pad (nominal)Noise: 12 dB SPLDynamic Range (typical): 133 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 82 dB, 1 kHz at 1 PaPhantom Power Requirements: 48V DC, 4.2 mA typicalSwitches: Flat, roll-off10 dB pad (nominal)Weight: 12.7 oz (360 g)Dimensions: 6.69" (170.0 mm) long,2.10" (53.4 mm) maximum body diameterOutput Connector: Integral 3-pin XLRM-type

The side-address AT4033aSM offers low-noise, symmetrical, transformerless circuitry that results in exceptional transient response and clean output signals. A strong up-front presence characterizes the sonic signature of this 40 Series pro-audio classic. The AT4033aSM's 80Hz high-pass filter easily switches between flat frequency response and a low-end roll-off that diminishes ambient noise and popping with closely-miked vocals.Features:A strong up-front presence characterizes the sonic signature of this versatile pro-audio classicTransformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transientsPrecision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivityThe 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of useFloating-construction capsule assembly provides isolation from noise and vibrationOpen acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflectionsState-of-the-art surface-mount electronics ensure compliance with Audio-Technica's stringent consistency and reliability standardsCustom shock mount provides superior isolationSpecifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 30-20,000 HzLow Frequency Roll Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)Dynamic Range: 128 dB, 1 kHz at Max SPLSignal to Noise Ratio: 77 dB, 1 kHz at 1 PaPhantom Power Requirements: 48V DC, 3.2 mA typicalWeight: 13.4 oz (380 g)Dimensions: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameterOutput Connector: Integral 3-pin XLRM-typeAccessories: AT8449 shock mount for 5/8"-27 threaded stands; protective carrying case

The Artist Elite AE3000 delivers supreme performance at extreme SPLs. This high-SPL large diaphragm cardioid condenser instrument mic excels in applications such as guitar cabinets, toms, snare, timpani, horns and overheads. Its large-diaphragm capsule combines with the open architecture of the headcase to provide an extremely accurate and open sound. Its low-profile side-address design with tapered grille allows for optimal positioning. Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 20-20,000 HzLow Frequency Roll-Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -43 dB (7.0 mV) re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D., 158 dB SPL, with 10 dB pad (nominal)Noise: 11 dB SPLDynamic Range (typical): 137 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 83 dB, 1 kHz at 1 PaPhantom Power Requirements: 11-52V DC, 3 mA typicalSwitches: High-pass filter, 10 dB pad (nominal)Weight: 6.0 oz (170 g)Dimensions: 4.55" (115.5 mm) long, 1.89" (48.0 mm) maximum diameterOutput Connector: Integral 3-pin XLRM-type

The Artist Elite AE5100 large diaphragm cardioid condenser instrument microphone provides uncompromising sound quality for overheads, percussion, acoustic guitar, strings and other acoustic instruments. With rich, warm, accurate sound, the AE5100 also incorporates the most essential ingredients for quality live sound in a choir microphone. Its large-diaphragm capsule delivers accurate, natural response, while its low-profile design permits innovative placement options. With a lower profile than the large studio microphones to which it compares sonically, the AE5100 offers an outstanding performance-to-size ratio. With its low noise and smooth response, the AE5100 is ideal for recording, too.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 20-20,000 HzLow Frequency Roll Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -36 dB (15.8 mV) re 1V at 1 PaImpedance: 150 ohmsMaximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL with 10 dB pad (nominal)Dynamic Range: 137 dB, 1 kHz at Max SPLSignal to Noise Ratio: 83 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 3.2 mA typicalWeight: 5.0 oz (143 g)Dimensions: 5.85" (148.5 mm) long, 1.02" (26.0 mm) maximum diameterOutput Connector: Integral 3-pin XLRM-type

The Audio Technica AT4050SC is a multi-pattern condenser studio microphone. It has dual 2-micron-thick large diaphragms which are gold-vaporized and aged for consistent, outstanding performance and a precision-machined, nickel-plated brass acoustic element baffle provides rock-solid element stability and exceptional sensitivity. It is able to withstand high sound pressure levels whilst delivering transparent and airy uppers/mids complemented by rich low-end qualities. Features include three switchable polar patterns (omnidirectional, cardioid and figure of eight), a switchable 80Hz hi-pass filter and 10dB pad, transformerless circuitry which virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients, and a custom shock mount providing superior mechanical isolation. It has a black finish and comes supplied with a AT8430 isolation stand clamp.Specifications:transducer type condenserpolar pattern cardioidfrequency response 20Hz - 20kHzsensitivity -34dB (19.9mV) re 1V  1Panominal impedance 50Ωsignal to noise ratio 78dB 1kHz  1Pamax sound pressure level 145dBself noise 16dB SPLpower requirement 48V DC phantom powerconnector 3 pole male XLRdimensions 155mm L x 21mm Dweight 126g

The rich, warm sound takes you back to the classic F.E.T. studio microphones. But there’s nothing remotely old-fashioned about the technology behind that vintage sound. The AT4047/SV studio condenser’s dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range. With a wide dynamic range, incredibly low self-noise and high SPL capability, this versatile microphone excels on vocals, strings, acoustic guitar, instrument ensembles, small vocal groups and voiceovers. Specifications:Element: Externally-polarized (DC bias) condenserPolar Pattern: CardioidFrequency Response: 20-18,000 HzLow Frequency Roll-Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -35 dB (17.7 mV) dB re 1V at 1 PaImpedance: 250 ohmsMaximum Input Sound Level: 149 dB SPL, 1 kHz at 1% T.H.D., 159 dB SPL, with 10 dB pad (nominal)Noise: 9 dB SPLDynamic Range (typical): 140 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 85 dB, 1 kHz at 1 PaPhantom Power Requirements: 48V DC, 3.0 mA typicalSwitches: Flat, roll-off, 10 dB pad (nominal)Weight: 14.5 oz (410 g)Dimensions: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameterOutput Connector: Integral 3-pin XLRM-type

The AT5040 Studio Vocal Microphone by Audio-Technica marks the debut of their flagship 50 Series of microphones. In addition to vocals, its fast transient response make it ideal for acoustic instruments. Each AT5040 is hand-assembled and individually inspected to ensure the finest quality audio capture.The AT5040 employs a four-part rectangular element to provide purity of sound. Each of the four parts function together and get proprietarily summed to output. This provides a surface area twice the size of a standard one-inch circular diaphragm. Additionally, the AT5040 features an advanced internal shockmounting system, effectively decoupling the capsule from the housing for vibration-free performance.The Audio-Technica AT5040's frequency response chart reflects the company's claim of an "extremely smooth top end with controlled sibilance." A dip of approximately 3dB occurs between 4.5kHz and 8.5kHz, a prime "s" location. The microphone's reactivity slowly tapers after the 10kHz mark. An approximate 2 to 3dB boost in response below 80Hz could create a pleasant promiximity effect on a male vocalist, then rolled off to taste in mixing.Specifications:Element Type: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Cardioid Frequency Response: 20 to 20,000 Hz Open Circuit Sensitivity: -25 dB (56.2 mV) re 1V at 1 Pa Impedance: 50Ω Maximum Input Level: 142 dB SPL, 1 kHz at 1% T.H.D. Noise: 5 dB SPL (typical, A-weighted) Dynamic Range (Typical): 137 dB, 1 kHz at max SPL Signal-to-Noise Ratio: 89 dB, 1 kHz at 1 Pa Phantom Power Requirements: 48V DC, 3.8 mA typical Output Connector: Integral 3-pin XLRM-type Case Form Factor: Audio-Technica R10 Dimensions (Ø x L): 2.24 x 6.51" (57 x 165.3 mm) Weight: 20.5 oz (582 g)

The multi-pattern Audio-Technica AT4047MP Condenser Microphone delivers vintage sound while offering selectable omnidirectional, cardioid, and figure-8 polar patterns. The AT4047MP microphone's transformer-coupled output and specially tuned element provide sonic characteristics reminiscent of early F.E.T. studio microphone designs. With a wide dynamic range, incredibly low self-noise and high SPL capability, the versatile Audio Technica AT4047MP microphone excels on vocals, strings, acoustic guitar, instrument ensembles, small vocal groups, and voiceovers.Features:Three switchable polar patterns: cardioid, omnidirectional, figure-of-eightEngineered to meet the critical acoustic requirements of professional recording, broadcast, and sound reinforcementTransformer-coupled output and specially tuned element provide sonic characteristics reminiscent of early F.E.T. studio microphone designsExceptionally low self-noise, wide dynamic range and high SPL capabilityDual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphonePrecision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivityVintage silver-matte finish on microphone and shock mountOpen acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflectionsCustom shock mount provides superior isolationIntegral 80Hz high-pass filter switch and 10dB pad switchSpecifications:Element: Externally-polarized (DC bias) condenserPolar Pattern: Cardioid, Omnidirectional, Figure-of-eightFrequency Response: 20-18,000HzLow Frequency Roll-Off: 80Hz, 12dB/octaveOpen Circuit Sensitivity: -42dB (7.9 mV), re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 155dB SPL, 1 kHz at 1% THD; 165dB SPL, with 10dB pad (nominal)Noise: 14dBDynamic Range (Typical): 141dB, 1kHz at Max SPLSignal-To-Noise Ratio: 80dB, 1kHz at 1 PaPhantom Power Requirements: 48V DC, 3.4 mA typicalSwitches: Polar selection; Flat, roll-off, 10dB pad (nominal)Weight: 524g (18.5oz.)Dimensions: 188.0mm (7.40") long, 53.4mm (2.10") maximum body diameterOutput Connector: Integral 3-pin XLRM-typeAudi-Technica Case Style: R1

The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing. Specifications:Type: Closed-back dynamicDriver Diameter: 40 mmMagnet: NeodymiumVoice Coil: Copper-clad aluminum wireFrequency Response: 15 - 20,000 HzMaximum Input Power: 700 mW at 1 kHzSensitivity: 96 dBImpedance: 47 ohmsWeight: 190 g (6.7 oz), without cable and connectorCable: 3.0 m (9.8'), straight, left-side exitAccessory Included: 6.3 mm (1/4") snap-on adapter