Audio Technica

The M-Series ATH-M40x professional monitor headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range. Your studio experience is enhanced with superior sound isolation and swiveling earcups for convenient one-ear monitoring. Engineered with pro-grade materials and robust construction, the M40x excels in professional studio tracking and mixing, as well as DJ monitoring. Specifications:Type: Closed-back dynamicDriver Diameter: 40 mmMagnet: NeodymiumVoice Coil: CCAW (Copper-clad aluminum wire)Frequency Response: 15 - 24,000 HzMaximum Input Power: 1,600 mW at 1 kHzSensitivity: 98 dBImpedance: 35 ohmsWeight: 240 g (8.5 oz), without cable and connectorCable: Includes two interchangeable cables: detachable 1.2 m - 3.0 m (3.9' - 9.8') coiled cable and detachable 3.0 m (9.8') straight cableAccessories Included: Protective carrying pouch, 6.3 mm (1/4") screw-on adapter

Ideal for critical studio and live applications, the low-profile AT4021 offers a flat, extended frequency response, high maximum SPL and wide dynamic range. Its low self-noise is perfectly suited for the most sophisticated recording equipment. Its low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer. The microphone offers outstanding reproduction of low-frequency sounds. Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 20-20,000 HzLow Frequency Roll-Off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 PaImpedance: 250 ohmsMaximum Input Sound Level: 146 dB SPL, 1 kHz at 1% T.H.D., 156 dB SPL, with 10 dB pad (nominal)Noise: 14 dB SPLDynamic Range (typical): 132 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 80 dB, 1 kHz at 1 PaPhantom Power Requirements: 48V DC, 3.0 mA typicalSwitches: Flat, roll-off  10 dB padWeight: 119 g (4.2 oz)Dimensions: 144.0 mm (5.67") long, 21.0 mm (0.83") maximum body diameterOutput Connector: Integral 3-pin XLRM-type

The Audio Technica AT-MONO3/SP cartridge is special – redesigning not just the needle, but the whole cartridge specially for “shellac” or phonograph records. A high output moving coil cartridge of excellent production quality and wound with PCOCC coil for signal purity, it is designed to deliver excellent fidelity and superb clarity when playing 78 RPM mono records. With its high output of 1.2 mV, it can be used without additional pre-amplification or a MC transformer.Proven in use for many years in Japan, the Audio-Technica AT-MONO3/SP cartridge in now available in Europe and helps to bring back the pure joy of discovery and listening pleasure for 78 RPM record playing.Made specifically for mono recordings, the cartridge only generates signal with horizontal movement. However to produce a minimal wear on the groove, the AT-MONO3/SP also has an adapted vertical compliance.Straight pipe aluminium cantilever and low mass stylus guarantees a high tracking ability.The average usage time is 500 hours extending the life span of precious mono recordings.High purity PCOCC allows a more transparent signal transmission offering a high efficiency and a high fidelity.To support the internal mechanism, the body is made of solid die-cast aluminium alloy, furthermore stiffness is achieved with the addition of rigid synthetic resin to hold the body.​Specification:Type: Horizontal Mono Moving CoilMounting: 1/2" CentersFrequency Response: 22 - 22,000 HzBody Material: Aluminium/Synthetic ResinOutput Voltage: 1.2 mV (at 1 kHz, 12 cm/sec)Vertical Tracking Angle: 23°Vertical Tracking Force Range: 3.0 - 7.0 g (5.0 g standard)Stylus Shape: ConicalStylus Size: 2.5 milStylus Construction: Nude Square ShankCantilever: Aluminum PipeCoil Impedance: 40 ohms (1 kHz)Coil Inductance: 190 µm (1kHz)DC Resistance: 40 ohmsStatic Compliance: 10×10-6cm/dyneDynamic Compliance: 3.5×10-6cm/dyne (100Hz)Recommended Load Impedance: 400 - 47,000 ohmsWeight: 6.8g

Made specifically for mono recordings on vinyl records, the cartridge only generates signal with horizontal movement. However to produce a minimal wear on the groove, the AT-MONO3/LP also has an adapted vertical compliance.Carefully selected components and state of the art technology produce a high resolution cartridge.Straight pipe aluminium cantilever and low mass stylus guarantees a high tracking ability.The average usage time is 500 hours extending the life span of precious mono recordings.High purity PCOCC allows a more transparent signal transmission both high efficiency and high fidelity.To support the internal mechanism, the body is made of solid die-cast aluminium alloy, furthermore stiffness is achieved with the addition of rigid synthetic resin to hold the body.​Specification:Type: Horizontal Mono Moving CoilMounting: 1/2” centersFrequency Response: 20 - 20,000HzBody Material: Aluminium/Synthetic ResinOutput Voltage: 1.2 mV (at 1 kHz, 5.0 cm/sec)Vertical Tracking Angle: 23°Vertical Tracking Force Range: 1.5 to 2.5 g (standard 2.0 g)Stylus Shape: ConicalStylus Construction: 0.6 milCantilever: Aluminium PipeCoil Impedance: 40Ω (1kHz)Coil Inductance: 190 µH (1kHz)DC Resistance: 40ΩStatic Compliance: 20×10-6cm/dyneDynamic Compliance: 7×10-6cm/dyne (100Hz)Recommended Load Impedance: 400 to 47,000 ohmsWeight: 6.8g

Audio-Technica’s stringent quality and consistency standards set the AT2020 apart from other mics in its class. Its low-mass diaphragm is custom-engineered for extended frequency response and superior transient response. With rugged construction for durable performance, the microphone offers a wide dynamic range and handles high SPLs with ease. The AT2020: the new standard for affordable side-address studio condensers.   The price/performance standard in side-address studio condenser microphone technology   Ideal for project/home-studio applications  High SPL handling and wide dynamic range provide unmatched versatility  Custom-engineered low-mass diaphragm provides extended frequency response and superior transient responseCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source  Pivoting, threaded stand mount attaches securely for easy and precise placement of the microphone

Meet the studio condenser that captures every nuance. With three switchable polar patterns, the large-diaphragm Audio-Technica AT4050SM exhibits a remarkable combination of qualities: high-SPL capability with transparent and airy uppers/mids complemented by rich low-end qualities. Its dual large diaphragms are gold-vaporized and aged for consistent, outstanding performance. A precision-machined, nickel-plated brass acoustic element baffle provides rock-solid element stability and exceptional sensitivity. Supplied with AT8449 shockmount. Also available as the AT4050SC with the AT8430 isolation stand clamp.Ideal for studio use and live sound productions with vocals, piano, strings, drum overheads, guitar amps, and more.  Transparent uppers/mids balanced by rich low-end qualities combine with advanced acoustic engineering for extensive performance capabilities and highest quality  Dual-diaphragm capsule design maintains precise polar pattern definition across the full frequency range of the microphone  The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics achieved remain constant over years of use  Three switchable polar patterns: omni, cardioid, figure-of-eight  Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients  State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards  Switchable 80 Hz hi-pass filter and 10 dB pad  Custom shock mount provides superior isolation  Also available as the AT4050SC with the AT8430 isolation stand clamp

Audio-TechnicaΆs high-performance AE4100 cardioid dynamic vocal microphone delivers aggressive sound that stays up-front in the mix. Optimized for the stage, the microphone features superior anti-shock engineering for minimum handling noise. Its rugged construction is engineered to stand up to the rigors of touring. For ultimate protection against vocal plosives, the micΆs hardened-steel outer grille is lined with fine steel mesh and a layer of open-cell foam. A foam disk positioned on top of the element assembly provides the final layer of “pop” protection.ELEMENT DynamicPOLAR PATTERN CardioidFREQUENCY RESPONSE 90-18,000 HzOPEN CIRCUIT SENSITIVITY -55 dB (1.7 mV) re 1V at 1 PaIMPEDANCE 250 ohmsWEIGHT 10.9 oz (310 g)DIMENSIONS 6.97" (177.0 mm) long,1.89" (48.0 mm) head diameter,1.30" to 0.87" (33.0 to 22.0 mm) tapered body diameterOUTPUT CONNECTOR Integral 3-pin XLRM-type

The ATM230 hypercardioid instrument microphone brings a compact drum model to Audio-Technica’s popular Artist Series line. The mic’s proprietary capsule is designed to excel in high SPL applications, delivering full, well-rounded audio with an exceptional low-end. The hypercardioid polar pattern keeps the focus on the sound source, directionality that is aided by the mic’s low-profile design, which allows it to be placed in a wide variety of setups. All this makes the ATM230 ideally suited for miking toms, snare and other percussion instruments. The ATM230 features rugged metal construction that stands up to the rigors of live and studio applications, and comes with an AT8665 drum mount and a protective pouch.  Specifications:Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceHandles very high SPL at close rangeBig, warm low-frequency response with excellent attackLow-profile design permits versatile placement around drum kitRugged, all-metal design and construction for years of trouble-free useIncludes AT8665 drum mount and a soft protective pouchElement: DynamicPolar Pattern: HypercardioidFrequency Response: 30-12,000 HzOpen Circuit Sensitivity: –54 Db (1.9 Mv) Re 1v At 1 PaImpedance: 600 OhmsWeight: 292 G (10.3 Oz)Dimensions: 82.5 Mm (3.2") Long, 38.0 Mm (1.5") Maximum Diameter

This cardioid dynamic step-up is built to survive the realities of day-to-day use and still produce clear, full-range vocal reproduction every time. Its superior internal shock mounting reduces handling noise. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.Features:Natural, full-range vocal reproduction; ideal for close-up vocal use in performanceSuperior internal shock mounting reduces handling noiseCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceHi-ENERGY® neodymium magnet for articulate vocal reproductionTwo-stage ball-type headcase for superior "pop" protectionMagnaLock™ on/off switchCorrosion-resistant contacts from gold-plated XLRM-type connectorRugged design and construction for reliable performanceSpecifications:Element: DynamicPolar Pattern: CardioidFrequency Response: 90-16,000 HzOpen Circuit Sensitivity: -55 Db (1.7 Mv) Re 1v At 1 PaImpedance: 300 OhmsSwitch: Magnalock™ On/offWeight: 10.7 Oz (304 G)Dimensions: 7.28" (185.0 Mm) Long, 2.09" (53.1 Mm) Head DiameterOutput Connector: Integral 3-pin Xlrm-typeCable: 15.0' (4.5 M) Cable With Xlrf-type Connector At Microphone End, Xlrm-type Connector At Equipment EndAccessories Furnished: At8470 Quiet-flex™ Stand Clamp For 5/8"-27 Threaded Stands; 5/8"-27 To 3/8"-16 Threaded Adapter; Soft Protective Pouch

This affordable cardioid dynamic microphone is designed for close-up vocal performance. The PRO 31QTR offers a broad frequency response and low handling noise in a tough, durable design that delivers consistent performance on the road.The mic sets price/performance standards for intelligibility, transparent sound quality and noise suppression. Available in two models for easy use with consumer and pro electronics: PRO 31 (XLRF-XLRM cable) and PRO 31QTR (XLRF- ¼” cable).Features:Close-up vocal performance microphone sets price/performance standards for intelligibility, transparent sound quality and noise suppressionCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceHi-ENERGY® neodymium magnet for high output and articulate vocal reproductionTwo-stage ball-type headcase for superior "pop" protectionMagnaLock™ on/off switchCorrosion-resistant contacts from gold-plated XLRM-type connectorRugged design and construction for reliable performanceSpecifications:Element: DynamicPolar Pattern: CardioidFrequency Response: 60-13,000 HzOpen Circuit Sensitivity: -55 Db (1.7 Mv) Re 1v At 1 PaImpedance: 600 OhmsSwitch: Magnalock™ On/offWeight: 11.0 Oz (312 G)Dimensions: 7.28" (185.0 Mm) Long, 2.09" (53.1 Mm) Head DiameterOutput Connector: Integral 3-pin Xlrm-typeCable: 15.0' (4.5 M) Cable With Xlrf-type Connector At Microphone End, 1/4" Connector At Equipment EndAccessories Furnished: At8470 Quiet-flex™ Stand Clamp For 5/8"-27 Threaded Stands; 5/8"-27 To 3/8"-16 Threaded Adapter; Soft Protective Pouch

Audio-Technica’s newscaster-style omnidirectional ATR3350iS lavalier microphone is engineered for intelligible, accurate voice reproduction.This high-quality condenser is ideal for video use, and is a favorite choice for aerobics/dance/sports instructors. Its low-profile design assures minimum visibility. Included smartphone adapter provides instant compatibility with newer smartphones (Android, iPhone, more).​Features:Newscaster-style miniature mic is perfect for video useIdeal for aerobics/dance/sports instructorsDual-mono 1/8" output plug connects to a video camera, DSLR, or handheld audio recorder's stereo 1/8" input, to record audio on both left and right channelsOmni pickup pattern offers full coverageIncludes adapter for use with newer smartphones (Android, iPhone, more). Tie clip, LR44 battery, foam windscreen includedSpecifications:Element: CondenserPolar Pattern: OmnidirectionalFrequency Reponse: 50 – 18,000 HzOpen Circuit Sensitivity; -54 dBImpedance: 1,000 ohmsBattery Type: LR44Weight: 6 g (0.2 oz)Cable: 6 m (20') terminated with 3.5 mm (1/8") dual mono mini-plug

Terminated with locking 4-pin connector for A-T UniPak® body-pack wireless transmitters. 55" (1.4 m) cable. Includes windscreen and clothing clip. See MT830R.

Maintaining the Audio-Technica tradition of clear and transparent sound quality, the U853A cardioid condenser hanging microphone is ideal for speech, theater, orchestra and choir sound reinforcement and recording. The microphone's fast transient response and low distortion characteristics allow every complex detail to be heard with all its impact-rich, vibrant qualities faithfully reproduced. Equipped with UniGuard innovations that offer unsurpassed immunity from radio frequency interference, the U853A accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. The battery- or phantom-powered microphone also offers an 80 Hz low-cut UniSteep filter that reduces pickup of low-frequency ambient noise.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 30-20,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: Phantom: 42 dB (7.9 mV) re 1V at 1 Pa Battery: 43 dB (7.0 mV) re 1V at 1 PaImpedance: Phantom: 200 ohms Battery: 270 ohmsMaximum Input Sound Level: Phantom: 133 dB, 1 kHz at 1% T.H.D. Battery: 123 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: Phantom: 109 dB, 1 kHz at Max SPL Battery: 99 dB, 1 kHz at Max SPLSignal to Noise Ratio: 70 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalBattery Type: 1.5V AA/UM3Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)Switch: Off, on-flat, on-roll-offCable: 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector

The PRO49QL quick-mount double-gooseneck cardioid condenser microphone is designed to plug into any standard XLRF-type surface or cable connector. With a flat, smooth frequency response and self-contained electronics, this mic features a quiet, fixed-placement, long-life gooseneck and wide-range condenser element with low-mass diaphragm for superior performance. Available in two lengths: 13.07" (PRO49Q); 16.46" (PRO49QL).Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 70-16,000 HzOpen Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 106 dB, 1 kHz at Max SPLSignal to Noise Ratio: 66 dB, 1 kHz at 1 PaPhantom Power Requiremens: 9-52V DC, 2 mA typicalWeight: 3.0 oz (84 g)Dimensions: 16.46" (418.0 mm) long, 0.47" (12.0 mm) head diameter, 0.74" (18.9 mm) base diameterOutput Connector: Integral 3-pin XLRM-type

Ideal for conference centers, boardrooms, courtrooms, houses of worship, and other installed applications, the U857Q is designed to plug directly into a panel- or desk-mounted XLRF-type connector. This cardioid condenser quick-mount gooseneck microphone offers unsurpassed immunity from radio frequency interference thanks to Audio-Technica's UniGuard innovations. The 14.47" long microphone features an ultra-flexible small-diameter gooseneck and accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. Equipped with self-contained electronics, the phantom-powered microphone also offers an 80 Hz low-cut UniSteep filter that reduces pickup of low-frequency ambient noise.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 30-20,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: 39 dB (11.2 mV) re 1V at 1 PaImpedance: 250 ohmsMaximum Input Sound Level: 139 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 115 dB, 1 kHz at Max SPLSignal to Noise Ratio: 70 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalSwitch: Flat, roll-offWeight: 5.1 oz (144 g)Dimensions: 14.37" (365.0 mm) long, 0.48" (12.2 mm) head diameter, 0.74" (18.9 mm) base diameterOutput Connector: Integral 3-pin XLRM-type

The 18.94" version of the U857Q, the U857QL cardioid condenser quick-mount gooseneck microphone is designed to plug directly into a panel- or desk-mounted XLRF-type connector. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations. It features an ultra-flexible small-diameter gooseneck and accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. Equipped with self-contained electronics, the phantom-powered microphone also offers an 80 Hz low-cut UniSteep filter that reduces pickup of low-frequency ambient noise.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 30-20,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: 39 dB (11.2 mV) re 1V at 1 PaImpedance: 250 ohmsMaximum Input Sound Level: 139 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 115 dB, 1 kHz at Max SPLSignal to Noise Ratio: 70 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalSwitch: Flat, roll-offWeight: 5.3 oz (150 g)Dimensions: 18.94" (481.0 mm) long, 0.48" (12.2 mm) head diameter, 0.74" (18.9 mm) base diameterOutput Connector: Integral 3-pin XLRM-type

With advanced capsule design coupled with carefully engineered internal electronics, the U857QLU UniLine condenser delivers clear, consistent sound for a variety of installed applications. The 23.74" version of U857QU, the U857QLU features Audio-Technica’s UniLine line-cardioid element. The microphone is designed to plug directly into a panel- or desk-mounted XLRF-type connector. Its ultra-flexible, robust gooseneck permits easy adjustment into desired shape while resisting inadvertent repositioning.Featuring UniGuard innovations that offer unsurpassed immunity from radio frequency interference, the U857QLU accepts new interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. The phantom-powered microphone also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: Line CardioidFrequency Response: 30-20,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: –35 dB (17.7 mV) re 1V at 1 PaImpedance: 250 ohmsMaximum Input Sound Level: 135 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 115 dB, 1 kHz at Max SPLSignal to Noise Ratio: 74 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalSwitch: Flat, roll-offWeight: 5.9 oz (167 g)Dimensions: 23.74" (603.0 mm) long, 0.48" (12.2 mm) head diameter, 0.74" (18.9 mm) base diameterOutput Connector: Integral 3-pin XLRM-type

Equipped with Audio-Technica's UniLine line-cardioid element with a tightly focused 90° acceptance angle, the U853AU UniPoint UniLIne Condenser Hanging Microphone features UniGuard innovations that offer unsurpassed immunity from radio frequency interference. The battery or phantom-pored microphone accepts interchangeable elements, available in cardioid, hypercardioid, omnidirectional and UniLine line cardioid polar patterns. It also offers an 80 Hz low-cut UniSteep filter that reduces pickup of low-frequency ambient noise.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: Line CardioidFrequency Response: 30-20,000 HzLow Frequency Roll-off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: Phantom —38 dB (11.2 mV) re 1V at 1 Pa; Battery —39 dB (10.0 mV) re 1V at 1 PaImpedance: Phantom 200 ohms; Battery 270 ohmsMaximum Input Sound Level: Phantom 130 dB, 1 kHz at 1% T.H.D.; Battery 120 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range (Typical): Phantom 110dB, 1 kHz at Max SPL; Battery 100 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 74 dB, 1 kHz at 1 PaPhantom Power Requirements: 11-52V DC, 2 mA typicalBattery Type: 1.5V AA/UM3Battery Current/ Life: 0.4 mA / 1200 hours typical (alkaline)Switch: Off, on-flat, on-roll-offWeight (microphone): 1.1 oz (30 g)Weight (Power Module): 4.9 oz. (139 g)Dimensions (Microphone): 6.14" (156.0 mm) long, 0.48" (12.2 mm) diameterDimensions Power Module (H x W x D): 3.31" x 2.48" x 0.87", (84.0 mm x 63.0 mm x 22.0 mm)Output Connector (power module): Integral 3-pin XLRM-typeCable: 25' (7.6 m) long, permanently attached 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connectorOptional interchangeable elements: UE-C Cardioid (120°); UE-H hypercardioid (100°); UE-O omnidirectional (360°)Accessories Furnished: AT8154 two-stage foam windscreen; AT8451 steel hanger; AT8531 power module; AT8438 5/8"-27 stand adapter; batteryAudio Technica: M32

Two microphones in one—perfect for applications requiring separate miking for PA and broadcast. The ES995 offers excellent sonic character, simple operation and streamlined appearance. One element is typically used to provide sound reinforcement while the other feeds clean audio to a broadcast network, media pool or logging recorder with no electrical interaction between the elements. The two elements can also feed audio to two separate installed systems in a church or school.The circuit grounds for each channel are completely isolated, greatly reducing the potential for hum. Each element is individually shock-mounted. Robust table-mounted microphone is ideal for courtrooms, boardrooms, government chambers, schools and churches. Rigid-pipe design has ball-in-socket mounted to heavy, portable tabletop base. Integral dual power module; requires 11-52V DC phantom power. Optically coupled, lighted remote mute switch has three modes (push-to-mute, toggle, and push-to-talk). Interchangeable elements are available for omnidirectional and hypercardioid patterns. 19.51” long. Specifications:Elements: Two fixed-charge back plate, permanently polarized condensersPolar Pattern: CardioidFrequency Response: 90-15,000 HzLow Frequency Roll-off: Fixed 120 Hz, 12 dB/octaveOpen Circuit Sensitivity: -41 dB (8.9 mV) re 1V at 1 PaImpedance: 250 ohmsMaximum Input Sound Level: 138 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range (Typical): 109 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 65 dB, 1 kHz at 1 PaPhantom Power Requirements: 11-52V DC, 3 mA typicalSwitch: (on circuit board) SW1: Normal/-15 dB, SW2: Mute/Toggle/Talk, SW3: Off/OnWeight: 3.31 lb (1.5 kg)Dimensions: 19.51" (495.6 mm) long, 1.51" (38.4 mm) maximum head diameterOutput Connector : Integral 6-pin XLRM-typeCable: 30' (9.1 m) 6-conductor shielded "Y" cable - 6-pin XLRF to two 3-pin XLRMOptional interchangeable elements: ESE-H hypercardioid (100º), ESE-0 omnidirectional (360º)

The Audio-Technica PRO 31 microphone has a cardioid polar pattern that reduces sound pickup s from the sides and rear, improving isolation of the desired sound source. Hi-ENERGY neodymium magnet for high output and articulate vocal reproduction. 2-stage ball-type headcase for superior "pop" protection. MagnaLock on/off switch. Corrosion-resistant contacts from gold-plated XLRM-type connector. Rugged design and construction for reliable performance.Features:Dynamic element60-13,000Hz frequency responseXLRM-type output connectorQuiet-Flex stand clamp5/8" to 3/8" threaded adapter15' cable XLRF-XLRMSpecifications:    Element: Dynamic    Polar Pattern: Cardioid    Frequency Response: 60-13,000 Hz    Open Circuit Sensitivity: -55 dB (1.7 mV) re 1V at 1 Pa    Impedance: 600 ohms    Switch: MagnaLock™ on/off    Weight: 11.0 oz (312 g)    Dimensions: 7.28" (185.0 mm) long, 2.09" (53.1 mm) head diameter    Output Connector: Integral 3-pin XLRM-type    Cable: 15.0' (4.5 m) cable with XLRF-type connector at microphone end, XLRM-type connector at equipment end

The Audio-Technica AE6100 is a dynamic mic that delivers great presence and sound that cuts through monitor mixes. The AE6100 microphone has high output for fast transients and clean articulation. Maximum feedback and pop rejection. Tough, durable construction for road use.Features:Great presence with excellent monitor cutHigh output, fast transients, and clean articulationMaximum feedback rejectionSuperior anti-shock engineering for low handling noiseOutstanding pop protectionSpecifications:Element: dynamicPolar pattern: hypercardioidFrequency response: 60Hz-15kHzOpen-circuit sensitivity: -55dB (1.7mV) re 1v @ 1PaImpedance: 250 ohmsWeight: 10.9 oz.Output connector: XLRM

The new AT2010 is designed to bring the studio-quality articulation and intelligibility of Audio-Technica's renowned 20 Series to the stage, for crystal-clear vocal performances. Featuring the same 16 mm low-mass diaphragm found in the critically acclaimed AT2020 side-address studio condenser, the AT2010 excels wherever articulate vocals are needed: in houses of worship, for solo performances, jazz vocalists, singer/songwriters, and more.Specifications:Element: Fixed-charge back plate permanently polarized condenserPolar Pattern: CardioidFrequency Response: 40-20,000 HzOpen Circuit Sensitivity: 48 dB (3.9 mV) re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 136 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 113 dB, 1 kHz at Max SPLSignal to Noise Ratio: 71 dB, 1 kHz at 1 PaPhantom Power Requiremens: 48V DC, 2 mA typicalWeight: 233 g (8.2 oz)Dimensions: 179.1 mm (7.05") long, 50.8 mm (2.00") maximum body diameterOutput Connector: Integral 3-pin XLRM-type

The Audio-Technica PRO 61 is an exceptional vocal stage microphone. A dynamic mic that delivers outstanding gain before feedback, the PRO 61 has plenty of the presence needed for lead vocals. Its hypercardioid polar pattern improves isolation of the voice from surrounding sounds. The PRO 61 mic's superior internal shock mounting eliminates handling noise. A neodymium magnet yields the articulate reproduction needed for vocal use. Rugged Audio-Technica design and construction assure that the PRO 61 will serve you reliably with a long use life. Features:Excellent gain before feedbackOutstanding stage presence for lead and back-up vocalsExtended frequency response for optimal clarity and smooth, natural sonic characteristicsHypercardioid polar pattern improves isolation of desired sound sourceSuperior internal shock mounting reduces handling noiseHi-ENERGY neodymium magnet for articulate vocal reproduction2-stage ball-type headcase for superior "pop" protectionGold-plated XLRM-type connectorRugged design and construction for reliable performanceSpecifications:Element: dynamic ÀImpedance: 300 ohmsPolar Pattern: hypercardioidWeight: 11-3/4 oz (335 g)Frequency Response: 70 - 16,000 HzOutput Connector: XLRM-typeOpen Circuit Sensitivity: -55 dB (1.7 mV) re 1V at 1 Pa

Equipped with newly designed internal shock mounting for reduced handling and stage noise, the ATM510 from Audio-Technica is designed for smooth, natural vocal reproduction and low noise. This cardioid dynamic workhorse features super-durable construction for long-lasting performance, a rare-earth magnet for high output, and a multi-stage grille design for excellent protection against plosives. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, maximizing isolation from other sound sources and minimizing feedback. The ATM510 is enclosed in a rugged housing, and its multi-stage windscreen effectively controls popping, distortion from sibilant sounds and wind noise. The included AT8470 Quiet-FlexTM stand clamp permits mounting on any microphone stand with 5/8"-27 threads.Features:Newly designed internal shock mounting reduces handling and stage noiseTailored for smooth, natural vocal reproductionCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceDurable performance for professional applicationsRare-earth magnet for improved output and transient responseExcellent off-axis rejection for minimum feedbackMulti-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarityQuiet-Flex stand clamp provides silent, flexible microphone positioningCorrosion-resistant contacts from gold-plated XLRM-type connectorSpecfications:Element: DynamicPolar Pattern: CardioidFrequency Response: 90Hz-16kHzOpen Circuit Sensitivity: –55 dB (1.7 mV) re 1V at 1 PaImpedance: 300 ohmsWeight: .57 lb. (9.1 oz.)Dimensions: 6-11/16" (170mm) long; 2-1/8" (53.7mm) diameterOutput Connector: Integral 3-pin XLRM-typeAccessories: AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouchAudio-Technica Case Style: T6

Tuned for clear, detailed, extended-range reproduction of lead and backup vocals, the ATM610 Hypercardioid dynamic vocal mic is equipped with a rare earth neodymium magnet, a tight hypercardioid polar pattern and multi-stage grille design. The Audio Technica microphone features an innovative dual-wall floating construction; the back-cavity assembly "floats" inside the handle shell, providing outstanding isolation from handling noise. Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source.Features:Durable performance for professional applicationsSpecial dual-wall floating construction reduces handling noise and assures consistent performance from mic to micHi-Energy neodymium magnet for articulate vocal reproductionMulti-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarityQuiet-Flex stand clamp provides silent, flexible microphone positioningCorrosion-resistant contacts from gold-plated XLRM-type connectorRugged, all-metal design and construction for years of trouble-free useSpecifications:Element: DynamicPolar pattern: HypercardioidFrequency response: 40-16,000 HzOpen circuit sensitivity: —55 dB (1.7 mV) re 1V at 1 PaImpedance: 300 ohmsWeight: 280 g (9.9 oz)Dimensions: 177.0 mm (6.97") long, 48.0 mm (1.89") diameterOutput connector: Integral 3-pin XLRM-typeAccessories furnished: AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouchAudio-technica case style: T6

The Audio Technica AT8031 microphone is ideal for close-up interviews, vocals, overheads, piano, and strings. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source. The mic's proximity effect provides added warmth when used close up. Features include a large protective screen that reduces "popping" and sibilant distortion. It operates on battery or phantom power.Features:Ideal for close-up vocals, overheads, piano and stringsLow-mass diaphragm ensures minimum distortionCardioid pattern provides added warmth when used close upOperates on battery or phantom powerRoHS compliant free from all substances specified in the EU directive on hazardous substancesSpecifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 30-20,000 HzLow Frequency Roll-off: 80 Hz, 12 dB/octaveOpen Circuit Sensitivity: Phantom —44 dB (11.2 mV) re 1V at 1 Pa, Battery —45 dB (10.0 mV) re 1V at 1 PaImpedance: Phantom 250 ohms; Battery 300 ohmsMaximum Input Sound Level: Phantom 137 dB, 1 kHz at 1% T.H.D., Battery 123 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range (Typical): Phantom 113 dB, 1 kHz at Max SPL, Battery 99 dB, 1 kHz at Max SPLSignal-To-Noise Ratio: 70 dB, 1 kHz at 1 PaPhantom Power Requirements: 11-52V DC, 2 mA typicalBattery Type: 1.5V AA/UM3Battery Current/Life: 0.4 mA / 1200 hours typical (alkaline)Switch: Flat, roll-offWeight: 7.2 oz (205 g)Dimensions: 7.60" (193.0 mm) long, 1.98" (50.3 mm) head diameterOutput Connector: Integral 3-pin XLRM-typeAccessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8114 windscreen; battery; soft protective pouchAudio Technica Case Style: S7

Natural and articulate vocal reproduction when clipped on with the included Lavalier clip and equally impressive guitar reproduction when used with the included instrument adapter. Cardioid polar pattern reduces pickup of sound from the sides and rear. Switchable low-frequency roll-off minimizes rumble and boominess. Gold-plated XLRM-type connector resists corrosion and provides faultless signal. Operates on battery or phantom power. 6' cable permanently attached between the mic and power module.Features:Condenser elementCardioid pattern100 - 14,000 Hz response123 dB SPL, 1 kHz at 1% THDAT8411 clothing clipAT8444 instrument adapterWindscreenPower module (attached)Battery

Ambient omnidirectional condenser lavalier microphone terminated with a right-angle 3.5 mm connector (compatible with Audio-Technica M2 & M3 Wireless Monitor Systems). Includes clothing clip and windscreen.

Terminated with locking 4-pin connector for A-T UniPak body-pack wireless transmitters. 55" (1.4 m) cable. Includes windscreen and clothing clip.

Miniature cardioid condenser microphone only, terminated for use with PRO 88W transmitter. 55" (1.4 m) cable. Includes clothing clip and windscreen.

The comprehensive MB/Dk7 Drum Pack includes a core selection of five microphones specifically engineered for drum applications, along with two MB 4k cardioid condenser microphones ideal for drum overhead miking. Also included in the package are four drum-rim microphone mounts and a durable carrying case.The four included MB 5k cardioid dynamic snare/tom microphones and one MB 6k cardioid dynamic kick microphone feature low-profile design for minimum visibility and versatile placement options around the drum kit. With a condenser design and extended frequency response perfect for overheads and hi-hat, the MB 4k features versatile battery/phantom operation, rugged all-metal construction, soft-touch finish, gold-plated XLRM-type connector, and an on/off switch. Its cardioid polar pattern minimizes feedback. High volumes come through without distortion; even subtle nuances are clean and precise. Specifications:Element: MB 4k: Condenser MB 5k: Dynamic MB 6k: DyanmicPolar Pattern: CardioidFrequency Response: MB 4k: 80-20,000 Hz MB 5k: 100-12,000 Hz MB 6k: 60-12,000 HzOpen Circuit Sensitivity: MB 4k (Phantom/Battery): -46 dB (5.0 mV)/ -48 dB (3.9 mV) re 1V at 1 Pa MB 5k: -58 dB (1.2 mV) re 1V at 1 Pa MB 6k: -59 dB (1.1 mV) re 1V at 1 PaImpedance: MB 4k (Phantom/Battery): 200 ohms/ 250 ohms MB 5k: 500 ohms MB 6k: 500 ohmsMaximum Input Sound Level: MB 4k (Phantom/Battery): 137 dB SPL/ 125 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: MB 4k (Phantom/Battery): 113 dB/ 101 dB, 1 kHz at Max SPLSignal to Noise Ratio: MB 4k: 70 dB, 1 kHz at 1 PaPhantom Power Requiremens: MB 4k: 11-52V DC, 2 mA typicalBattery Type: MB 4k: 1.5V AA/UM3Battery Current Life: MB 4k: 0.4 mA/ 1200 hours typicalSwitch: MB 4k: On/OffWeight: MB 4k: 6.4 oz (182 g) MB 5k: 11.4 oz (324 g) MB 6k: 11.2 oz (317 g)Dimensions: MB 4k: 8.10" (205.7 mm) long, 1.64" (41.7 mm) head diameter MB 5k: 4.46" (113.2 mm) long, 1.63" (41.5 mm) head diameter MB 6k: 4.59" (116.5 mm) long, 2.11" (53.5 mm) head diameterOutput Connector: Integral 3-pin XLRM-type

The MB/Dk5 Drum Pack includes a core selection of five microphones specifically engineered for drum applications. The four included MB 5k snare/tom microphones and one MB 6k kick microphone feature low-profile design for minimum visibility and versatile placement options around the drum kit. Also included in the package are four AT8665 drum-rim microphone mounts and a durable carrying case.Tailored for snare, rack toms and other highly dynamic instruments, the MB 5k snare/tom microphone offers a moving coil dynamic design with cardioid polar pattern, delivering superior off-axis rejection for maximum gain before feedback. With a frequency response of 100-12,000 Hz, the mic is engineered to handle fast transients and high SPLs. The cardioid dynamic MB 6k kick microphone has a frequency response of 60-12,000 Hz. A natural at handling high SPLs, the MB 6k delivers superior results on bass drum as well as on floor and deep rack toms. Specifications:Element: DynamicPolar Pattern: CardioidFrequency Response: MB 5k: 100-12,000 Hz, MB 6k: 60-12,000 HzOpen Circuit Sensitivity: MB 5k: -58 dB (1.2 mV) re 1V at 1 Pa, MB 6k: -59 dB (1.1 mV) re 1V at 1 PaImpedance: 500 ohmsWeight: MB 5k: 11.4 oz (324 g), MB 6k: 11.2 oz (317 g)Dimensions: MB 5k: 4.46" (113.2 mm) long, 1.63" (41.5 mm) head diameter, MB 6k: 4.59" (116.5 mm) long, 2.11" (53.5 mm) head diameterOutput Connector: Integral 3-pin XLRM-type

With robust construction and unobtrusive appearance, the PRO45 and PRO45W offer versatile sound-reinforcement solutions for speech, theater, orchestra and choir sound reinforcement and recording. The microphones high-SPL handling is perfect for suspension over choirs and orchestras. Available in two colors: Black (PRO45), white (PRO45W).Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 70-16,000 HzOpen Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 106 dB, 1 kHz at Max SPLSignal to Noise Ratio: 66 dB, 1 kHz at 1 PaPhantom Power Requiremens: 9-52V DC, 2 mA typicalWeight: 0.5 oz (15 g)Dimensions: 2.24" (56.9 mm) long, 0.47" (12.0 mm) head diameterOutput Connector: 3-pin XLRM-type on cableCable: 25' (7.6 m) long, permanently attached

Delivers a warm low-frequency response with excellent presence. Hypercardioid polar pattern improves isolation of desired sound source. Superior off-axis rejection for maximum gain before feedback. Versatile mounting options and effective dampening of mechanical noise thanks to included AT8471 isolation clamp. Rugged design and construction for reliable performance.Features:Dynamic elementHypercardioid pattern30-12,000Hz frequency responseIsolation clamp5/8" to 3/8" threaded adapterSpecifications:Open Circuit Sensitivity: -54 dB (1.9 mV) re 1V at 1 Pa600 ohms impedance8.1 oz.XLRM-type output connector.

With robust construction and unobtrusive appearance, the PRO45 and PRO45W offer versatile sound-reinforcement solutions for speech, theater, orchestra and choir sound reinforcement and recording. The microphones high-SPL handling is perfect for suspension over choirs and orchestras. Available in two colors: Black (PRO45), white (PRO45W).Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 70-16,000 HzOpen Circuit Sensitivity: -37 dB (14.1 mV) re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 134 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: 106 dB, 1 kHz at Max SPLSignal to Noise Ratio: 66 dB, 1 kHz at 1 PaPhantom Power Requiremens: 9-52V DC, 2 mA typicalWeight: 0.5 oz (15 g)Dimensions: 2.24" (56.9 mm) long, 0.47" (12.0 mm) head diameterOutput Connector: 3-pin XLRM-type on cableCable: 25' (7.6 m) long, permanently attached

The Audio-Technica PRO 35 clip-on microphone is designed for sax, brass, toms, and percussion. The PRO35 is a cardioid condenser mic that excels in high-SPL (sound pressure level) applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included UniMount clip permits accurate positioning and provides shock resistance while protecting the element. The microphone's cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source. Features:Ideal for sax, toms, brass and percussionExcels in high-SPL applicationsIdeal for active stage performancesUniMount clip permits accurate positioning, provides shock resistance and protects elementCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceExtended frequency response captures subtle nuances of the performance6' (1.8 m) cable permanently attached between microphone and power module

The ATM250DE dual-element instrument microphone features cardioid condenser and hypercardioid dynamic capsules combined in a single housing. Audio-Technica’s innovative use of two polar patterns is ideal for kick drum: the hypercardioid dynamic element focuses tightly on the aggressive attack of the beater, while the condenser captures the round tonalities of the shell. The elements are positioned in a perfect phase relationship, something practically impossible to achieve with two separate microphones. Includes a professional isolation clamp to provide secure mounting, versatile positioning and effective dampening of unwanted mechanical noise. Specifications:Elements: Condenser, dynamicPolar Patterns: Cardioid (condenser), Hypercardioid (dynamic)Frequency Response: 40-20,000 Hz (condenser), 40-15,000 Hz (dynamic)Low Frequency Roll-Off: 80 Hz, 12 dB/octave (condenser)Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa (condenser), –53 dB (2.2 mV) re 1V at 1 Pa (dynamic)Impedance: 50 ohms (condenser), 600 ohms (dynamic)Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D. (condenser)Dynamic Range (typical): 122 dB, 1 kHz at Max SPL (condenser)Signal-To-Noise Ratio: 68 dB, 1 kHz at 1 Pa (condenser)Phantom Power Requirements: 11-52V DC, 3.5 mA typical (condenser)Switches: Flat, roll-off; 10 dB pad (condenser only)Weight: 320 g (11.3 oz)Dimensions: 143.6 mm (5.65") long, 55.0 mm (2.17") diameterOutput Connector: Integral 5-pin XLRM-typeCable: 5.0 m (16.5') dual shielded, 8-conductor cable, 5-pin XLRF-type connector at microphone, two 3-pin XLRM-type output connectors

The ATM650 is a versatile addition to the Artist Series featuring a new multi-stage flat grille design for precise positioning close to the sound source. Equipped with a neodymium magnet for high-output performance, the ATM650 has a frequency response tailored for clear sound reproduction of guitar cabinets, snare and percussion. A-T's innovative dual-wall floating construction banishes handling noise.Features:Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourceDurable performance for professional applicationsSpecial dual-wall floating construction reduces handling noise and assures consistent performance from mic to micHi-ENERGY neodymium magnet for improved output and transient responseMulti-stage flat grille design is engineered to enable easy placement as close as possible to sound sourceCorrosion-resistant contacts from gold-plated XLRM-type connectorRugged, all-metal design and construction for years of trouble-free useSpecifications:Element: DynamicPolar Pattern: HypercardioidFrequency Response: 80-17,000 HzOpen Circuit Sensitivity: —56 dB (1.5 mV) re 1V at 1 PaImpedance: 300 ohmsWeight: 279 g (9.8 oz)Dimensions: 164.2 mm (6.46") long, 38.8 mm (1.53") diameterOutput Connector: Integral 3-pin XLRM-typeAudio-Technica Case Style: T5

Audio-Technica's PRO92cW wireless omnidirectional condenser headworn microphone offers a natural, smooth frequency response optimized for vocal articulation. The mic features a small condenser capsule; a lightweight, contoured earpiece; and a flexible boom that is easily repositioned for a comfortable fit. Terminated to fit Audio-Technica wireless systems, the PRO92cW is available in black or beige.Specifications:Comfortable headset is ideal for lecturers and other applications requiring clear, articulate vocal projectionFlexible, contoured earpiece hooks over either ear for a comfortable fitNatural smooth frequency response optimized for vocal articulationRugged construction designed to stand up to the challenges of day-to-day useIncludes storage pouch and clothing clipAvailable in black and beige models

Audio Technica Pro 8 U dynamic Headset Mic for Aerobic 4 pd connector for Audio Technica Wireless System.

Terminated with locking 4-pin connector for A-T UniPak body-pack wireless transmitters. 55" (1.4 m) cable. Includes windscreen.

Ideal for drummers, keyboard players or anyone requiring hands-free operation, the ATM73a features a comfortable, unobtrusive headband design with side-of-mouth pickup. Its belt-mounted power module operates on battery or phantom power.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 40-15,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: PHANTOM: -55 dB (1.7 mV) re 1V at 1 Pa BATTERY: -56 dB (1.5 mV) re 1V at 1 PaImpedance: PHANTOM: 200 ohms BATTERY: 270 ohmsMaximum Input Sound Level: PHANTOM: 146 dB SPL, 1 kHz at 1% T.H.D. BATTERY: 132 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: PHANTOM: 111 dB, 1 kHz at Max SPL BATTERY: 97 dB, 1 kHz at Max SPLSignal to Noise Ratio: 59 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalBattery Type: 1.5V AA/UM3Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)Switch: Off, on-flat, on-roll-offCable: 4.6' (1.4 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor shielded cable with TA3F-type connector

Terminated with locking 4-pin connector for A-T UniPak body-pack wireless transmitters. 55" (1.4 m) cable. Includes windscreens.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: CardioidFrequency Response: 40-15,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: PHANTOM: -55 dB (1.7 mV) re 1V at 1 Pa BATTERY: -56 dB (1.5 mV) re 1V at 1 PaImpedance: PHANTOM: 200 ohms BATTERY: 270 ohmsMaximum Input Sound Level: PHANTOM: 146 dB SPL, 1 kHz at 1% T.H.D. BATTERY: 132 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: PHANTOM: 111 dB, 1 kHz at Max SPL BATTERY: 97 dB, 1 kHz at Max SPLSignal to Noise Ratio: 59 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalBattery Type: 1.5V AA/UM3Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)Switch: Off, on-flat, on-roll-offCable: 4.6' (1.4 m) long (permanently attached to microphone), 0.10" (2.6 mm) diameter, 2-conductor shielded cable with TA3F-type connector

Terminated for Sennheiser wireless systems using Lemo connector. 55" (1.4 m) cable. Beige color mic and cable. Includes element covers, windscreens and cable clip.Specifications:Element: CondenserPolar Pattern: OmnidirectionalFrequency Response: 20-20,000 HzOpen Circuit Sensitivity: –44 dB (6.3 mV) re 1V at 1 PaMaximum Input Sound Level: 122 dB SPL, 1 kHz at 1% T.H.D.Signal-To-Noise Ratio: 60 dB, 1 kHz at 1 PaPower Requirements: Voltage Range: 2.5-11V, Current Consumption: 0.1 mA typical  5VWeight: Microphone, boom & earpiece: 0.08 oz (2.4 g)Dimensions: Microphone: 0.32" (8.1 mm) long, 0.11" (2.7 mm) diameter, Boom: 3.87" (98.4 mm) long, 0.042" (1.07 mm) boom diameterCable: 55" (1.4 m), unterminated

Offering outstanding Audio-Technica sound for surface-mount applications, the U851A features a PivotPoint rotating output connector, UniSteep® filter and UniGuard® RFI-shielding technology. This battery- or phantom-powered condenser microphone accepts interchangeable condenser elements - available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. Its heavy die-cast case and silicon foam bottom pads minimize coupling of surface vibration to the microphone. With superior off-axis rejection and maximum gain-before-feedback, this professional microphone sets audio-quality standards in challenging acoustic environments.Specifications:Element: Fixed-charge back plate, permanently polarized condenserPolar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)Frequency Response: 30-20,000 HzLow Frequency Roll Off: 80 Hz, 18 dB/octaveOpen Circuit Sensitivity: Phantom: -40 dB (10.0 mV) re 1V at 1 Pa Battery: -41 dB (8.9 mV) re 1V at 1 PaImpedance: Phantom: 200 ohms Battery: 270 ohmsMaximum Input Sound Level: Phantom: 133 dB SPL, 1 kHz at 1% T.H.D. Battery: 123 dB SPL, 1 kHz at 1% T.H.D.Dynamic Range: Phantom: 111 dB,1 kHz at Max SPL Battery: 101 dB, 1 kHz at Max SPLSignal to Noise Ratio: 72 dB, 1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC, 2 mA typicalBattery Type: 1.5V AA/UM3Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)Switch: Off, on-flat, on-roll-offCable: 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector