BAE

BAE 1028 Mic Pre and EQ Pair with PSUThe BAE 1028 is a mic preamp with 3-band EQ inspired by the legendary 1073 with extensive additional frequencies.The BAE 1028 Mic Pre and EQ (Pair) uses the exact same mic and line preamp as the 1073 with Carnhill (St Ives) Transformers to give the true vintage tone associated with this legendary preamp.In addition the 1028 features no less than 28 frequencies including the same Low pass filter found on the 1084 module. The additional frequencies are located in the mid-bell and high shelf bands with frequencies selected to allow for greater flexibility with the mid bell able to play against the low and high shelves for rich, flexible and musical tonal shaping capabilities.FeaturesInspired by the legendary 1073Class A transformer-coupledHand-wired, all-discrete using modular cardsThree-band with HPF28 total frequency points with mid band overlappingExtended selection for high frequency shelvingHigh quality Swiss-made Elma® rotary switches

BAE 1073 Single Channel Mic Pre / EQ W/power supplyThe BAE 1073 is as authentic as you can get to the original, featuring the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire.The BAE 1073 looks identical to the original vintage module and will happily retrofit in vintage Neve 80 Series consoles because the entire product is engineered in exactly the same way as the originals: the same chassis construction, connectors, printed circuit board layouts, hand-wired looms, and circuitry.Features of the BAE 1073 Single Channel Mic Pre / EQHigh Frequency: +/-16dB fixed frequency shelving at 12kHzLow Frequency: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220HzMid Range: +/-18dB peaking, fixed ‘Q’ with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz & 7.2kHzHigh Pass Filter: 18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz & 300HzIncludes BAE 24V PSU to operate.The power supply can run 2 units simultaneously thats why units are sold separately.

BAE 1073 Mic Pre / EQ Pair with PSUThe BAE 1073 is as authentic as you can get to the original, featuring the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire.The BAE 1073 looks identical to the original vintage module and will happily retrofit in vintage Neve 80 Series consoles because the entire product is engineered in exactly the same way as the originals: the same chassis construction, connectors, printed circuit board layouts, hand-wired looms, and circuitry.Features of the BAE 1073 Mic Pre / EQ Pair with PSUHigh Frequency: +/-16dB fixed frequency shelving at 12kHzLow Frequency: +/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz & 220HzMid Range: +/-18dB peaking, fixed ‘Q’ with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz & 7.2kHzHigh Pass Filter: 18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz & 300Hz

Definitive British Preamp/EQ, Enhanced Neve 80 series consoles defined the sound of 1970s rock 'n' roll; their original 1073 preamp and EQ modules wrote the book on characterful mic preamplification and punchy equalization. Introduced later in the decade, the 1084 included several enhancements under the bonnet, most notably selectable HF frequency centers and a lowpass filter. Done up in classic RAF blue-gray livery, the BAE 1084 Rackmount nails the authentic sound of the vintage modules, using the same hand-wired, transformer-coupled Class A design and original-spec components like Carnhill St. Ives transformers, Elma switches, and Canford wire. With 80dB of gain on tap, the 1084 lets you capture subdued sources with your favorite ribbon mic. Cranking preamp gain enhances your tracks with tasty vintage-style coloration. The 1084 is fitted with concentric highpass and lowpass filters to curtail undesirable frequency extremes that could mar an otherwise perfect performance. And the 1084's renowned 3-band EQ section can enhance anything. The BAE 1084. Take it from Sweetwater: this is the stuff of legend. BAE 1084 Rackmount Features: All Class A, hand-wired transformer-coupled design 80dB of gain on tap handles low-out ribbon mics Highpass filter: Off, 50Hz, 80Hz, 160Hz, and 300Hz Lowpass filter: Off, 6kHz, 8kHz, 10kHz, 14kHz, and 18kHz 3-band EQ section HF: +/-16dB shelving, selectable center frequencies at 10kHz, 12kHz, and 16kHz MF: +/-18dB peaking, fixed Q, selectable center frequencies at 360Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, and 7.2kHz LF: +/-16dB shelving, selectable center frequencies at 35Hz, 60Hz, 110Hz, and 220Hz Handles line-level inputs for added versatility High-impedance DI for guitar, bass, synth, and other sources Polarity reverse switch Original-spec components include Carnhill St. Ives transformers, Elma switches, and Canford wire Frequency response: 10Hz-55kHz (-3dB) Mic input impedance selector switches between 1200 and 300 ohms Line input impedance: 10k ohms; DI Input Impedance 150k ohms Output impedance: 65 ohms Common mode rejection ratio: 100dB min at 60Hz Maximum output level: +27.4 dBu at 600ohms Regulated linear power supply runs up to two channels

Definitive British Preamp/EQ, Enhanced Neve 80 series consoles defined the sound of 1970s rock 'n' roll; their original 1073 preamp and EQ modules wrote the book on characterful mic preamplification and punchy equalization. Introduced later in the decade, the 1084 included several enhancements under the bonnet, most notably selectable HF frequency centers and a lowpass filter. Done up in classic RAF blue-gray livery, the BAE 1084 Rackmount nails the authentic sound of the vintage modules, using the same hand-wired, transformer-coupled Class A design and original-spec components like Carnhill St. Ives transformers, Elma switches, and Canford wire. With 80dB of gain on tap, the 1084 lets you capture subdued sources with your favorite ribbon mic. Cranking preamp gain enhances your tracks with tasty vintage-style coloration. The 1084 is fitted with concentric highpass and lowpass filters to curtail undesirable frequency extremes that could mar an otherwise perfect performance. And the 1084's renowned 3-band EQ section can enhance anything. The BAE 1084. Take it from Sweetwater: this is the stuff of legend. BAE 1084 Rackmount Features: All Class A, hand-wired transformer-coupled design 80dB of gain on tap handles low-out ribbon mics Highpass filter: Off, 50Hz, 80Hz, 160Hz, and 300Hz Lowpass filter: Off, 6kHz, 8kHz, 10kHz, 14kHz, and 18kHz 3-band EQ section HF: +/-16dB shelving, selectable center frequencies at 10kHz, 12kHz, and 16kHz MF: +/-18dB peaking, fixed Q, selectable center frequencies at 360Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, and 7.2kHz LF: +/-16dB shelving, selectable center frequencies at 35Hz, 60Hz, 110Hz, and 220Hz Handles line-level inputs for added versatility High-impedance DI for guitar, bass, synth, and other sources Polarity reverse switch Original-spec components include Carnhill St. Ives transformers, Elma switches, and Canford wire Frequency response: 10Hz-55kHz (-3dB) Mic input impedance selector switches between 1200 and 300 ohms Line input impedance: 10k ohms; DI Input Impedance 150k ohms Output impedance: 65 ohms Common mode rejection ratio: 100dB min at 60Hz Maximum output level: +27.4 dBu at 600ohms Regulated linear power supply runs up to two channels