Q-Acoustics

The heart of any home cinema system, the Q 3090Ci has been developed to compliment the 3000i series perfectly, bringing crisp and clear dialogue and onscreen sound to life, using the latest technological enhancements applied to the full 3000i series. Key Features Accurate Centre speaker with precision drivers can be shelf or cabinet mounted on pre-fitted rubber feet or wall-mounted on optional, dedicate brackets. The normal terminal panel cut-out has been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts The 3090Ci is the same width as most Amplifiers and AV Receivers so will fit attractively into the specialist furniture designed to house them. The Centre Of Your Home Cinema Setup The Q 3090Ci boasts twin 100mm (4”) and 22mm (0.9”) precision drivers delivering the ultimate cinematic experience. You will hear every precise detail; every note, every word at its very best. The Q 3090Ci incorporates the same technology used across the rest of the 3000i range including P2P bracing and brand new high frequency drivers ensuring it complements the rest of the series, perfectly. Dynamic & Detailed With the new high frequency driver unit, the Q 3090Ci benefits from a decoupled tweeter which ensures the vibrations from the woofer, which can impair the performance of the tweeter, are isolated allowing the tweeter to perform with dramatically reduced interference, resulting in a purer sound. The all new mid/bass drive unit boasts a precision formed cone from impregnated and coated paper and teamed with a newly developed, low-hysteresis, rubber surround also contributing to unwanted resonances. Easy Room Positioning  The 3090Ci is the same width as most Amplifiers and AV Receivers so will fit attractively into the specialist furniture designed to house them. The conventional terminal panel cut-outs have been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts have been incorporated with sockets deep enough to accept 4mm (0.16 in) Banana Plugs. Beautiful Inside And Out Not only does the entire 3000i range features all new enclosure aesthetics but it also offers 4 new contemporary finishes. The new 3000i series speakers are available in four standard finishes; Graphite Grey, English Walnut, Carbon Black or Arctic White. All are finished with an attractive chrome bezel around each driver and feature magnetic speaker grilles.

The heart of any home cinema system, the Q 3090Ci has been developed to compliment the 3000i series perfectly, bringing crisp and clear dialogue and onscreen sound to life, using the latest technological enhancements applied to the full 3000i series. Key Features Accurate Centre speaker with precision drivers can be shelf or cabinet mounted on pre-fitted rubber feet or wall-mounted on optional, dedicate brackets. The normal terminal panel cut-out has been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts The 3090Ci is the same width as most Amplifiers and AV Receivers so will fit attractively into the specialist furniture designed to house them. The Centre Of Your Home Cinema Setup The Q 3090Ci boasts twin 100mm (4”) and 22mm (0.9”) precision drivers delivering the ultimate cinematic experience. You will hear every precise detail; every note, every word at its very best. The Q 3090Ci incorporates the same technology used across the rest of the 3000i range including P2P bracing and brand new high frequency drivers ensuring it complements the rest of the series, perfectly. Dynamic & Detailed With the new high frequency driver unit, the Q 3090Ci benefits from a decoupled tweeter which ensures the vibrations from the woofer, which can impair the performance of the tweeter, are isolated allowing the tweeter to perform with dramatically reduced interference, resulting in a purer sound. The all new mid/bass drive unit boasts a precision formed cone from impregnated and coated paper and teamed with a newly developed, low-hysteresis, rubber surround also contributing to unwanted resonances. Easy Room Positioning  The 3090Ci is the same width as most Amplifiers and AV Receivers so will fit attractively into the specialist furniture designed to house them. The conventional terminal panel cut-outs have been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts have been incorporated with sockets deep enough to accept 4mm (0.16 in) Banana Plugs. Beautiful Inside And Out Not only does the entire 3000i range features all new enclosure aesthetics but it also offers 4 new contemporary finishes. The new 3000i series speakers are available in four standard finishes; Graphite Grey, English Walnut, Carbon Black or Arctic White. All are finished with an attractive chrome bezel around each driver and feature magnetic speaker grilles.

The heart of any home cinema system, the Q 3090Ci has been developed to compliment the 3000i series perfectly, bringing crisp and clear dialogue and onscreen sound to life, using the latest technological enhancements applied to the full 3000i series. Key Features Accurate Centre speaker with precision drivers can be shelf or cabinet mounted on pre-fitted rubber feet or wall-mounted on optional, dedicate brackets. The normal terminal panel cut-out has been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts The 3090Ci is the same width as most Amplifiers and AV Receivers so will fit attractively into the specialist furniture designed to house them. The Centre Of Your Home Cinema Setup The Q 3090Ci boasts twin 100mm (4”) and 22mm (0.9”) precision drivers delivering the ultimate cinematic experience. You will hear every precise detail; every note, every word at its very best. The Q 3090Ci incorporates the same technology used across the rest of the 3000i range including P2P bracing and brand new high frequency drivers ensuring it complements the rest of the series, perfectly. Dynamic & Detailed With the new high frequency driver unit, the Q 3090Ci benefits from a decoupled tweeter which ensures the vibrations from the woofer, which can impair the performance of the tweeter, are isolated allowing the tweeter to perform with dramatically reduced interference, resulting in a purer sound. The all new mid/bass drive unit boasts a precision formed cone from impregnated and coated paper and teamed with a newly developed, low-hysteresis, rubber surround also contributing to unwanted resonances. Easy Room Positioning  The 3090Ci is the same width as most Amplifiers and AV Receivers so will fit attractively into the specialist furniture designed to house them. The conventional terminal panel cut-outs have been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts have been incorporated with sockets deep enough to accept 4mm (0.16 in) Banana Plugs. Beautiful Inside And Out Not only does the entire 3000i range features all new enclosure aesthetics but it also offers 4 new contemporary finishes. The new 3000i series speakers are available in four standard finishes; Graphite Grey, English Walnut, Carbon Black or Arctic White. All are finished with an attractive chrome bezel around each driver and feature magnetic speaker grilles.

The heart of any home cinema system, the Q 3090Ci has been developed to compliment the 3000i series perfectly, bringing crisp and clear dialogue and onscreen sound to life, using the latest technological enhancements applied to the full 3000i series. Key Features Accurate Centre speaker with precision drivers can be shelf or cabinet mounted on pre-fitted rubber feet or wall-mounted on optional, dedicate brackets. The normal terminal panel cut-out has been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts The 3090Ci is the same width as most Amplifiers and AV Receivers so will fit attractively into the specialist furniture designed to house them. The Centre Of Your Home Cinema Setup The Q 3090Ci boasts twin 100mm (4”) and 22mm (0.9”) precision drivers delivering the ultimate cinematic experience. You will hear every precise detail; every note, every word at its very best. The Q 3090Ci incorporates the same technology used across the rest of the 3000i range including P2P bracing and brand new high frequency drivers ensuring it complements the rest of the series, perfectly. Dynamic & Detailed With the new high frequency driver unit, the Q 3090Ci benefits from a decoupled tweeter which ensures the vibrations from the woofer, which can impair the performance of the tweeter, are isolated allowing the tweeter to perform with dramatically reduced interference, resulting in a purer sound. The all new mid/bass drive unit boasts a precision formed cone from impregnated and coated paper and teamed with a newly developed, low-hysteresis, rubber surround also contributing to unwanted resonances. Easy Room Positioning  The 3090Ci is the same width as most Amplifiers and AV Receivers so will fit attractively into the specialist furniture designed to house them. The conventional terminal panel cut-outs have been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts have been incorporated with sockets deep enough to accept 4mm (0.16 in) Banana Plugs. Beautiful Inside And Out Not only does the entire 3000i range features all new enclosure aesthetics but it also offers 4 new contemporary finishes. The new 3000i series speakers are available in four standard finishes; Graphite Grey, English Walnut, Carbon Black or Arctic White. All are finished with an attractive chrome bezel around each driver and feature magnetic speaker grilles.

The Q 3020i is a bookshelf or stand mount speaker from Q Acoustics core loudspeaker offering, designed to deliver beautiful sound into your home, using the latest technological enhancements applied to the full 3000i series. Key Features 25% increased cabinet volume from previous models delivering a larger scale sound and deeper bass P2P™ bracing – helps keep the enclosure extra quiet through computer aided placement of internal bracing Uses a 22mm decoupled High Frequency Driver with wide surround creating a wide even dispersion of stereo Low profile terminals - recessed cut-out reduces cabinet noise and allows them to be used near to rear wall New low profile binding posts have been incorporated with sockets deep enough to accept 4mm (0.16 in) Banana Plugs Bigger, Bolder Sound From The Q 3020I The 3020i builds on the success of its multi award winning predecessor. Boasting 125mm (5 in) and 22mm (0.9 in) precision drivers, the Q 3020i speakers deliver deep bass and room-filling sound. The 3020i maintain the same acoustically optimal front profile but have been made slightly taller and deeper giving an overall cabinet size increase of 25%. This increased internal volume has enabled the Q 3020i to gain an extended low frequency response from the ported design so that more-than-ever the smaller enclosures in the range belie their diminutive stature with an impressively large-scale sound. The Q 3020i speakers can be shelf-mounted on compliant, pre-fitted rubber feet, stand-mounted or wall-mounted on optional, dedicated stands and brackets ensuring the Q 3020i fit seamlessly and fill your chosen listening room with bold, beautiful sound. Leading Technology Ensuring The Most Open Soundstage The Q 3020i boasts P2P™ (Point to Point) bracing which supports the parts of the enclosure that need to be stiffened making the new enclosures exceptionally rigid, improving the focus of the stereo image and giving the soundstage more accuracy than ever before. With the addition of a brand new mid/bass driver and a high frequency driver unit with the tweeters decoupled from the baffles, which allows the tweeter to perform with dramatically reduced interference, the Q 3020i is a true testament of the technological enhancements the entire series has seen to make it our most special yet. New Low Profile Binding Posts For Easy Room Positioning Conventional terminal panel cut-outs have been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts have been incorporated with sockets deep enough to accept 4mm (0.16 in) Banana Plugs. The speaker can be positioned very close to a rear wall even when banana plugs rather than spades or bare wires are used. Beautiful Inside And Out Not only does the entire 3000i range features all new enclosure aesthetics but it also offers 4 new contemporary finishes. The new 3000i series speakers are available in four standard finishes; Graphite Grey, English Walnut, Carbon Black or Arctic White. All are finished with an attractive chrome bezel around each driver and feature magnetic speaker grilles.

The Q Acoustics 3030i is the latest bookshelf or stand-mount addition to our award-winning 3000i loudspeaker range. Designed to deliver big, bassy, hard-hitting yet beautifully poised sound from a compact, discreet and good-looking cabinet, it’s packed with Q Acoustics’ latest technological advances. Key Features Extraordinarily low 46Hz response for punchy, controlled bass P2P computer-aided bracing eliminates cabinet-borne resonances for the cleanest, most accurate sound Custom-designed stand for perfect placement, perfect isolation and perfect stability Power, With Control  The 3030i features an oversized 165mm mid/bass driver developed from the big, powerful 3050i floorstander, and it’s also fitted with that speaker’s 22mm decoupled tweeter. The result is extraordinarily substantial bass presence, beautifully poised and eloquent mid-range reproduction, and crisp, spacious high frequencies. Hear all the power and detail of your music. Dynamic And Detailed The all-new 165mm mid/bass driver is a precision-formed cone made from impregnated and coated paper, and is teamed with an optimised motor. Because it’s capable of such prodigious low-frequency presence, the 22mm tweeter above it is decoupled - so it’s isolated from the vibrations of the mid/bass driver. Which means clearer, purer sound. Braced For Action Like the whole of the 3000i range, the 3030i features Q Acoustics’ unique point-to-point bracing. This computer-aided process provides targeted and precise cabinet support, so the cabinet is supremely rigid and unwanted vibrations are banished. Beautiful Inside And Out Not only does the entire 3000i range feature all-new cabinet aesthetics but it also offers four contemporary finishes: Graphite Grey, Arctic White, English Walnut or Carbon Black. As with the rest of the 3000i range, the 3030i features magnetic grilles and an attractive chrome finish around each driver.

The all new, Q 3050i floorstanding speaker has been created using design principles taken from our critically acclaimed Concept 500 Series, resulting in stunning sonic performance and beautiful aesthetics. Key Features Striking floorstanding Speakers with twin 165mm and 22mm precision drivers The Q 3050i cabinet uses Point-to-Point (P2PTM) bracing techniques to reduce intrusive cabinet vibrations for a purer sound HPE™ technology eliminates sympathetic resonance within the enclosures by equalising air pressure within the 3050i cabinet Conventional terminal panel cut-outs have been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts Uses a 22mm decoupled High Frequency Driver with wide surround creating a wide even dispersion of stereo Leading Technology; Outstanding Performance The Q 3050i speakers boast a range of unique technologies including HPE™ and P2P™ to ensure these floorstanding speakers deliver a truly exceptional sound. HPE™ (Helmholtz Pressure Equalizer) technology designed to convert pressure to velocity and reduce the overall pressure gradient within the speaker enclosure, has been applied to the Q 3050i to reduce cabinet resonance. This technology is perfect for taller loudspeakers that tend to resonate at a single favoured frequency. Q Acoustics P2P™ bracing across the 3000i Series supports the parts of the enclosure that need to be stiffened making the enclosures exceptionally rigid, improving the focus of the stereo image and giving the soundstage more accuracy than in previous ranges. High Frequency Driver Unit For An Unaltered Sound Q 3050i tweeters are decoupled from the baffle via a compliant suspension system. Vibrations from the woofer, which can impair the performance of the tweeter are isolated allowing the tweeter to perform with dramatically reduced interference. Whichever 3000i model you choose the cone is precision formed from impregnated and coated paper and teamed with a newly developed, low-hysteresis, rubber surround. The coated paper cone provides the optimum balance between stiffness and self-damping which means it can accelerate without flexing and stop very accurately without unwanted resonances.

The Q 3020i is a bookshelf or stand mount speaker from Q Acoustics core loudspeaker offering, designed to deliver beautiful sound into your home, using the latest technological enhancements applied to the full 3000i series. Key Features 25% increased cabinet volume from previous models delivering a larger scale sound and deeper bass P2P™ bracing – helps keep the enclosure extra quiet through computer aided placement of internal bracing Uses a 22mm decoupled High Frequency Driver with wide surround creating a wide even dispersion of stereo Low profile terminals - recessed cut-out reduces cabinet noise and allows them to be used near to rear wall New low profile binding posts have been incorporated with sockets deep enough to accept 4mm (0.16 in) Banana Plugs Bigger, Bolder Sound From The Q 3020I The 3020i builds on the success of its multi award winning predecessor. Boasting 125mm (5 in) and 22mm (0.9 in) precision drivers, the Q 3020i speakers deliver deep bass and room-filling sound. The 3020i maintain the same acoustically optimal front profile but have been made slightly taller and deeper giving an overall cabinet size increase of 25%. This increased internal volume has enabled the Q 3020i to gain an extended low frequency response from the ported design so that more-than-ever the smaller enclosures in the range belie their diminutive stature with an impressively large-scale sound. The Q 3020i speakers can be shelf-mounted on compliant, pre-fitted rubber feet, stand-mounted or wall-mounted on optional, dedicated stands and brackets ensuring the Q 3020i fit seamlessly and fill your chosen listening room with bold, beautiful sound. Leading Technology Ensuring The Most Open Soundstage The Q 3020i boasts P2P™ (Point to Point) bracing which supports the parts of the enclosure that need to be stiffened making the new enclosures exceptionally rigid, improving the focus of the stereo image and giving the soundstage more accuracy than ever before. With the addition of a brand new mid/bass driver and a high frequency driver unit with the tweeters decoupled from the baffles, which allows the tweeter to perform with dramatically reduced interference, the Q 3020i is a true testament of the technological enhancements the entire series has seen to make it our most special yet. New Low Profile Binding Posts For Easy Room Positioning Conventional terminal panel cut-outs have been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts have been incorporated with sockets deep enough to accept 4mm (0.16 in) Banana Plugs. The speaker can be positioned very close to a rear wall even when banana plugs rather than spades or bare wires are used. Beautiful Inside And Out Not only does the entire 3000i range features all new enclosure aesthetics but it also offers 4 new contemporary finishes. The new 3000i series speakers are available in four standard finishes; Graphite Grey, English Walnut, Carbon Black or Arctic White. All are finished with an attractive chrome bezel around each driver and feature magnetic speaker grilles.

The Q 3020i is a bookshelf or stand mount speaker from Q Acoustics core loudspeaker offering, designed to deliver beautiful sound into your home, using the latest technological enhancements applied to the full 3000i series. Key Features 25% increased cabinet volume from previous models delivering a larger scale sound and deeper bass P2P™ bracing – helps keep the enclosure extra quiet through computer aided placement of internal bracing Uses a 22mm decoupled High Frequency Driver with wide surround creating a wide even dispersion of stereo Low profile terminals - recessed cut-out reduces cabinet noise and allows them to be used near to rear wall New low profile binding posts have been incorporated with sockets deep enough to accept 4mm (0.16 in) Banana Plugs Bigger, Bolder Sound From The Q 3020I The 3020i builds on the success of its multi award winning predecessor. Boasting 125mm (5 in) and 22mm (0.9 in) precision drivers, the Q 3020i speakers deliver deep bass and room-filling sound. The 3020i maintain the same acoustically optimal front profile but have been made slightly taller and deeper giving an overall cabinet size increase of 25%. This increased internal volume has enabled the Q 3020i to gain an extended low frequency response from the ported design so that more-than-ever the smaller enclosures in the range belie their diminutive stature with an impressively large-scale sound. The Q 3020i speakers can be shelf-mounted on compliant, pre-fitted rubber feet, stand-mounted or wall-mounted on optional, dedicated stands and brackets ensuring the Q 3020i fit seamlessly and fill your chosen listening room with bold, beautiful sound. Leading Technology Ensuring The Most Open Soundstage The Q 3020i boasts P2P™ (Point to Point) bracing which supports the parts of the enclosure that need to be stiffened making the new enclosures exceptionally rigid, improving the focus of the stereo image and giving the soundstage more accuracy than ever before. With the addition of a brand new mid/bass driver and a high frequency driver unit with the tweeters decoupled from the baffles, which allows the tweeter to perform with dramatically reduced interference, the Q 3020i is a true testament of the technological enhancements the entire series has seen to make it our most special yet. New Low Profile Binding Posts For Easy Room Positioning Conventional terminal panel cut-outs have been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts have been incorporated with sockets deep enough to accept 4mm (0.16 in) Banana Plugs. The speaker can be positioned very close to a rear wall even when banana plugs rather than spades or bare wires are used. Beautiful Inside And Out Not only does the entire 3000i range features all new enclosure aesthetics but it also offers 4 new contemporary finishes. The new 3000i series speakers are available in four standard finishes; Graphite Grey, English Walnut, Carbon Black or Arctic White. All are finished with an attractive chrome bezel around each driver and feature magnetic speaker grilles.

The Q 3020i is a bookshelf or stand mount speaker from Q Acoustics core loudspeaker offering, designed to deliver beautiful sound into your home, using the latest technological enhancements applied to the full 3000i series. Key Features 25% increased cabinet volume from previous models delivering a larger scale sound and deeper bass P2P™ bracing – helps keep the enclosure extra quiet through computer aided placement of internal bracing Uses a 22mm decoupled High Frequency Driver with wide surround creating a wide even dispersion of stereo Low profile terminals - recessed cut-out reduces cabinet noise and allows them to be used near to rear wall New low profile binding posts have been incorporated with sockets deep enough to accept 4mm (0.16 in) Banana Plugs Bigger, Bolder Sound From The Q 3020I The 3020i builds on the success of its multi award winning predecessor. Boasting 125mm (5 in) and 22mm (0.9 in) precision drivers, the Q 3020i speakers deliver deep bass and room-filling sound. The 3020i maintain the same acoustically optimal front profile but have been made slightly taller and deeper giving an overall cabinet size increase of 25%. This increased internal volume has enabled the Q 3020i to gain an extended low frequency response from the ported design so that more-than-ever the smaller enclosures in the range belie their diminutive stature with an impressively large-scale sound. The Q 3020i speakers can be shelf-mounted on compliant, pre-fitted rubber feet, stand-mounted or wall-mounted on optional, dedicated stands and brackets ensuring the Q 3020i fit seamlessly and fill your chosen listening room with bold, beautiful sound. Leading Technology Ensuring The Most Open Soundstage The Q 3020i boasts P2P™ (Point to Point) bracing which supports the parts of the enclosure that need to be stiffened making the new enclosures exceptionally rigid, improving the focus of the stereo image and giving the soundstage more accuracy than ever before. With the addition of a brand new mid/bass driver and a high frequency driver unit with the tweeters decoupled from the baffles, which allows the tweeter to perform with dramatically reduced interference, the Q 3020i is a true testament of the technological enhancements the entire series has seen to make it our most special yet. New Low Profile Binding Posts For Easy Room Positioning Conventional terminal panel cut-outs have been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts have been incorporated with sockets deep enough to accept 4mm (0.16 in) Banana Plugs. The speaker can be positioned very close to a rear wall even when banana plugs rather than spades or bare wires are used. Beautiful Inside And Out Not only does the entire 3000i range features all new enclosure aesthetics but it also offers 4 new contemporary finishes. The new 3000i series speakers are available in four standard finishes; Graphite Grey, English Walnut, Carbon Black or Arctic White. All are finished with an attractive chrome bezel around each driver and feature magnetic speaker grilles.

The Q Acoustics 3030i is the latest bookshelf or stand-mount addition to our award-winning 3000i loudspeaker range. Designed to deliver big, bassy, hard-hitting yet beautifully poised sound from a compact, discreet and good-looking cabinet, it’s packed with Q Acoustics’ latest technological advances. Key Features Extraordinarily low 46Hz response for punchy, controlled bass P2P computer-aided bracing eliminates cabinet-borne resonances for the cleanest, most accurate sound Custom-designed stand for perfect placement, perfect isolation and perfect stability Power, With Control  The 3030i features an oversized 165mm mid/bass driver developed from the big, powerful 3050i floorstander, and it’s also fitted with that speaker’s 22mm decoupled tweeter. The result is extraordinarily substantial bass presence, beautifully poised and eloquent mid-range reproduction, and crisp, spacious high frequencies. Hear all the power and detail of your music. Dynamic And Detailed The all-new 165mm mid/bass driver is a precision-formed cone made from impregnated and coated paper, and is teamed with an optimised motor. Because it’s capable of such prodigious low-frequency presence, the 22mm tweeter above it is decoupled - so it’s isolated from the vibrations of the mid/bass driver. Which means clearer, purer sound. Braced For Action Like the whole of the 3000i range, the 3030i features Q Acoustics’ unique point-to-point bracing. This computer-aided process provides targeted and precise cabinet support, so the cabinet is supremely rigid and unwanted vibrations are banished. Beautiful Inside And Out Not only does the entire 3000i range feature all-new cabinet aesthetics but it also offers four contemporary finishes: Graphite Grey, Arctic White, English Walnut or Carbon Black. As with the rest of the 3000i range, the 3030i features magnetic grilles and an attractive chrome finish around each driver.

The Q Acoustics 3030i is the latest bookshelf or stand-mount addition to our award-winning 3000i loudspeaker range. Designed to deliver big, bassy, hard-hitting yet beautifully poised sound from a compact, discreet and good-looking cabinet, it’s packed with Q Acoustics’ latest technological advances. Key Features Extraordinarily low 46Hz response for punchy, controlled bass P2P computer-aided bracing eliminates cabinet-borne resonances for the cleanest, most accurate sound Custom-designed stand for perfect placement, perfect isolation and perfect stability Power, With Control  The 3030i features an oversized 165mm mid/bass driver developed from the big, powerful 3050i floorstander, and it’s also fitted with that speaker’s 22mm decoupled tweeter. The result is extraordinarily substantial bass presence, beautifully poised and eloquent mid-range reproduction, and crisp, spacious high frequencies. Hear all the power and detail of your music. Dynamic And Detailed The all-new 165mm mid/bass driver is a precision-formed cone made from impregnated and coated paper, and is teamed with an optimised motor. Because it’s capable of such prodigious low-frequency presence, the 22mm tweeter above it is decoupled - so it’s isolated from the vibrations of the mid/bass driver. Which means clearer, purer sound. Braced For Action Like the whole of the 3000i range, the 3030i features Q Acoustics’ unique point-to-point bracing. This computer-aided process provides targeted and precise cabinet support, so the cabinet is supremely rigid and unwanted vibrations are banished. Beautiful Inside And Out Not only does the entire 3000i range feature all-new cabinet aesthetics but it also offers four contemporary finishes: Graphite Grey, Arctic White, English Walnut or Carbon Black. As with the rest of the 3000i range, the 3030i features magnetic grilles and an attractive chrome finish around each driver.

The Q Acoustics 3030i is the latest bookshelf or stand-mount addition to our award-winning 3000i loudspeaker range. Designed to deliver big, bassy, hard-hitting yet beautifully poised sound from a compact, discreet and good-looking cabinet, it’s packed with Q Acoustics’ latest technological advances. Key Features Extraordinarily low 46Hz response for punchy, controlled bass P2P computer-aided bracing eliminates cabinet-borne resonances for the cleanest, most accurate sound Custom-designed stand for perfect placement, perfect isolation and perfect stability Power, With Control  The 3030i features an oversized 165mm mid/bass driver developed from the big, powerful 3050i floorstander, and it’s also fitted with that speaker’s 22mm decoupled tweeter. The result is extraordinarily substantial bass presence, beautifully poised and eloquent mid-range reproduction, and crisp, spacious high frequencies. Hear all the power and detail of your music. Dynamic And Detailed The all-new 165mm mid/bass driver is a precision-formed cone made from impregnated and coated paper, and is teamed with an optimised motor. Because it’s capable of such prodigious low-frequency presence, the 22mm tweeter above it is decoupled - so it’s isolated from the vibrations of the mid/bass driver. Which means clearer, purer sound. Braced For Action Like the whole of the 3000i range, the 3030i features Q Acoustics’ unique point-to-point bracing. This computer-aided process provides targeted and precise cabinet support, so the cabinet is supremely rigid and unwanted vibrations are banished. Beautiful Inside And Out Not only does the entire 3000i range feature all-new cabinet aesthetics but it also offers four contemporary finishes: Graphite Grey, Arctic White, English Walnut or Carbon Black. As with the rest of the 3000i range, the 3030i features magnetic grilles and an attractive chrome finish around each driver.

The all new, Q 3050i floorstanding speaker has been created using design principles taken from our critically acclaimed Concept 500 Series, resulting in stunning sonic performance and beautiful aesthetics. Key Features Striking floorstanding Speakers with twin 165mm and 22mm precision drivers The Q 3050i cabinet uses Point-to-Point (P2PTM) bracing techniques to reduce intrusive cabinet vibrations for a purer sound HPE™ technology eliminates sympathetic resonance within the enclosures by equalising air pressure within the 3050i cabinet Conventional terminal panel cut-outs have been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts Uses a 22mm decoupled High Frequency Driver with wide surround creating a wide even dispersion of stereo Leading Technology; Outstanding Performance The Q 3050i speakers boast a range of unique technologies including HPE™ and P2P™ to ensure these floorstanding speakers deliver a truly exceptional sound. HPE™ (Helmholtz Pressure Equalizer) technology designed to convert pressure to velocity and reduce the overall pressure gradient within the speaker enclosure, has been applied to the Q 3050i to reduce cabinet resonance. This technology is perfect for taller loudspeakers that tend to resonate at a single favoured frequency. Q Acoustics P2P™ bracing across the 3000i Series supports the parts of the enclosure that need to be stiffened making the enclosures exceptionally rigid, improving the focus of the stereo image and giving the soundstage more accuracy than in previous ranges. High Frequency Driver Unit For An Unaltered Sound Q 3050i tweeters are decoupled from the baffle via a compliant suspension system. Vibrations from the woofer, which can impair the performance of the tweeter are isolated allowing the tweeter to perform with dramatically reduced interference. Whichever 3000i model you choose the cone is precision formed from impregnated and coated paper and teamed with a newly developed, low-hysteresis, rubber surround. The coated paper cone provides the optimum balance between stiffness and self-damping which means it can accelerate without flexing and stop very accurately without unwanted resonances.

The all new, Q 3050i floorstanding speaker has been created using design principles taken from our critically acclaimed Concept 500 Series, resulting in stunning sonic performance and beautiful aesthetics. Key Features Striking floorstanding Speakers with twin 165mm and 22mm precision drivers The Q 3050i cabinet uses Point-to-Point (P2PTM) bracing techniques to reduce intrusive cabinet vibrations for a purer sound HPE™ technology eliminates sympathetic resonance within the enclosures by equalising air pressure within the 3050i cabinet Conventional terminal panel cut-outs have been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts Uses a 22mm decoupled High Frequency Driver with wide surround creating a wide even dispersion of stereo Leading Technology; Outstanding Performance The Q 3050i speakers boast a range of unique technologies including HPE™ and P2P™ to ensure these floorstanding speakers deliver a truly exceptional sound. HPE™ (Helmholtz Pressure Equalizer) technology designed to convert pressure to velocity and reduce the overall pressure gradient within the speaker enclosure, has been applied to the Q 3050i to reduce cabinet resonance. This technology is perfect for taller loudspeakers that tend to resonate at a single favoured frequency. Q Acoustics P2P™ bracing across the 3000i Series supports the parts of the enclosure that need to be stiffened making the enclosures exceptionally rigid, improving the focus of the stereo image and giving the soundstage more accuracy than in previous ranges. High Frequency Driver Unit For An Unaltered Sound Q 3050i tweeters are decoupled from the baffle via a compliant suspension system. Vibrations from the woofer, which can impair the performance of the tweeter are isolated allowing the tweeter to perform with dramatically reduced interference. Whichever 3000i model you choose the cone is precision formed from impregnated and coated paper and teamed with a newly developed, low-hysteresis, rubber surround. The coated paper cone provides the optimum balance between stiffness and self-damping which means it can accelerate without flexing and stop very accurately without unwanted resonances.

The all new, Q 3050i floorstanding speaker has been created using design principles taken from our critically acclaimed Concept 500 Series, resulting in stunning sonic performance and beautiful aesthetics. Key Features Striking floorstanding Speakers with twin 165mm and 22mm precision drivers The Q 3050i cabinet uses Point-to-Point (P2PTM) bracing techniques to reduce intrusive cabinet vibrations for a purer sound HPE™ technology eliminates sympathetic resonance within the enclosures by equalising air pressure within the 3050i cabinet Conventional terminal panel cut-outs have been removed, giving greatly improved structural integrity to the enclosures and new low profile binding posts Uses a 22mm decoupled High Frequency Driver with wide surround creating a wide even dispersion of stereo Leading Technology; Outstanding Performance The Q 3050i speakers boast a range of unique technologies including HPE™ and P2P™ to ensure these floorstanding speakers deliver a truly exceptional sound. HPE™ (Helmholtz Pressure Equalizer) technology designed to convert pressure to velocity and reduce the overall pressure gradient within the speaker enclosure, has been applied to the Q 3050i to reduce cabinet resonance. This technology is perfect for taller loudspeakers that tend to resonate at a single favoured frequency. Q Acoustics P2P™ bracing across the 3000i Series supports the parts of the enclosure that need to be stiffened making the enclosures exceptionally rigid, improving the focus of the stereo image and giving the soundstage more accuracy than in previous ranges. High Frequency Driver Unit For An Unaltered Sound Q 3050i tweeters are decoupled from the baffle via a compliant suspension system. Vibrations from the woofer, which can impair the performance of the tweeter are isolated allowing the tweeter to perform with dramatically reduced interference. Whichever 3000i model you choose the cone is precision formed from impregnated and coated paper and teamed with a newly developed, low-hysteresis, rubber surround. The coated paper cone provides the optimum balance between stiffness and self-damping which means it can accelerate without flexing and stop very accurately without unwanted resonances.

Key Features These wonderfully finished speaker stands complement both the beauty and the ultimate sonic performance of the Concept 20 loudspeakers The stands are designed for music devotees who demand the very best quality from their loudspeakers. They incorporate the same Gelcore construction cabinet system found in the Concept 20 loudspeaker in an aesthetically pleasing and resonance-free floor stand. Supporting Your Speaker in a Unique Way The Concept 20 stand has been purpose built to deliver the best possible sound and complement your listening environment, acoustically and aesthetically. The interface between the speaker and the stand is a mounting platform designed using GelcoreTM principals to minimise the transmission of vibrations, producing a purer sound. Three specially designed steel mounting feet replace the rubber feet on the Concept 20 for a perfect fit with the stand. High Mass for Stabilty The Concept 20 Stands are around double the mass of the speaker mounted on it, which gives it extraordinary stability, ensuring the safety and sonic performance of your speakers. Solid Construction, Stylishly Compatible The Concept 20 Stand is constructed from a solid MDF upright with armoured glass outriggers for super-stability on both carpets and solid floors with spikes or rubber spike covers. It is available in two multi-layered lacquered finishes; gloss black and white.

Key Features These wonderfully finished speaker stands complement both the beauty and the ultimate sonic performance of the Concept 20 loudspeakers The stands are designed for music devotees who demand the very best quality from their loudspeakers. They incorporate the same Gelcore construction cabinet system found in the Concept 20 loudspeaker in an aesthetically pleasing and resonance-free floor stand. Supporting Your Speaker in a Unique Way The Concept 20 stand has been purpose built to deliver the best possible sound and complement your listening environment, acoustically and aesthetically. The interface between the speaker and the stand is a mounting platform designed using GelcoreTM principals to minimise the transmission of vibrations, producing a purer sound. Three specially designed steel mounting feet replace the rubber feet on the Concept 20 for a perfect fit with the stand. High Mass for Stabilty The Concept 20 Stands are around double the mass of the speaker mounted on it, which gives it extraordinary stability, ensuring the safety and sonic performance of your speakers. Solid Construction, Stylishly Compatible The Concept 20 Stand is constructed from a solid MDF upright with armoured glass outriggers for super-stability on both carpets and solid floors with spikes or rubber spike covers. It is available in two multi-layered lacquered finishes; gloss black and white.

Key Features: The Concept Centre is the heart of the Concept Cinema System. This new loudspeaker boasts a precisely optimised implementation of the revolutionary 'Gelcore' cabinet technology developed for the ground breaking Concept 20 and Concept 40 models. The result is a centre channel speaker that delivers astonishingly clear and dynamic dialogue. Enclosure type: 2-way reflex, Bass Unit: 2 x 100mm, Treble Unit: 25mm, Frequency Response: 75Hz - 22kHz, Nominal Impedance: 6ohm, Minimum Impedance: 4ohm, Sensitivity: 88dB, Recommended Power: 25 - 75w, Crossover Frequency: 2.9kHz, Dimensions H/D/W mm: 150 x 198 x 430 Centre of Excellence At the heart of any home cinema system is the Centre Channel, handling the difficult dialogue and often much more besides. The Concept Centre is a precisely optimised implementation of the GelcoreTM cabinet technology used in the Concept 20 and 40, in order to bring the highest quality performance from this key Home Cinema component. This ultra-low resonance and beautifully lacquered cabinet design with magnetic grille allows the dual 105mm drive units and wide dispersion 25mm tweeter to perform at their very articulate best. Ultra-Low Resonance Cabinet Design The Concept Centre uses GelcoreTM Cabinet Construction, where two layers of MDF, are separated by a bespoke, resonance absorbing, non-setting adhesive, which converts the kinetic energy and disperses it as heat. This substantially reduces distortion and allows the individual drive units to deliver their optimal performance; a pure and uncoloured sound. Simple to Drive, Simple to Position The Concept Centre is easily driven by any good quality amplifier, providing effortless peaks and crescendos in music and movies soundtracks. Alternative locations for positioning the speaker in the listening room are catered for by providing a foam bung which can be inserted in the rear-mounted reflex port modifying the bass response to suit positioning against a rear wall or in AV furniture.

Key Features: The Concept Centre is the heart of the Concept Cinema System. This new loudspeaker boasts a precisely optimised implementation of the revolutionary 'Gelcore' cabinet technology developed for the ground breaking Concept 20 and Concept 40 models. The result is a centre channel speaker that delivers astonishingly clear and dynamic dialogue. Enclosure type: 2-way reflex, Bass Unit: 2 x 100mm, Treble Unit: 25mm, Frequency Response: 75Hz - 22kHz, Nominal Impedance: 6ohm, Minimum Impedance: 4ohm, Sensitivity: 88dB, Recommended Power: 25 - 75w, Crossover Frequency: 2.9kHz, Dimensions H/D/W mm: 150 x 198 x 430 Centre of Excellence At the heart of any home cinema system is the Centre Channel, handling the difficult dialogue and often much more besides. The Concept Centre is a precisely optimised implementation of the GelcoreTM cabinet technology used in the Concept 20 and 40, in order to bring the highest quality performance from this key Home Cinema component. This ultra-low resonance and beautifully lacquered cabinet design with magnetic grille allows the dual 105mm drive units and wide dispersion 25mm tweeter to perform at their very articulate best. Ultra-Low Resonance Cabinet Design The Concept Centre uses GelcoreTM Cabinet Construction, where two layers of MDF, are separated by a bespoke, resonance absorbing, non-setting adhesive, which converts the kinetic energy and disperses it as heat. This substantially reduces distortion and allows the individual drive units to deliver their optimal performance; a pure and uncoloured sound. Simple to Drive, Simple to Position The Concept Centre is easily driven by any good quality amplifier, providing effortless peaks and crescendos in music and movies soundtracks. Alternative locations for positioning the speaker in the listening room are catered for by providing a foam bung which can be inserted in the rear-mounted reflex port modifying the bass response to suit positioning against a rear wall or in AV furniture.

An Innovative Solution The Concept 20 represents the start of a new era going beyond anything that Q Acoustics had achieved before. It's a beautifully styled product, which we confidently believe provides a level of sonic performance previously thought impossible at its price point. To achieve this extraordinary result, Q Acoustics' design team applied advanced technology to address cabinet resonance, widely recognised as the single biggest hurdle preventing 'high end' sonic performance. This State-of-the-Art, ultra-low resonance and beautifully lacquered cabinet design allows the 125mm drive unit and wide dispersion 25mm tweeter to perform at their very impressive best. Ultra-Low Resonance Cabinet Design The Concept 20 uses GelcoreTM Cabinet Construction, where two layers of MDF, are separated by a bespoke, resonance absorbing, non-setting adhesive which converts the kinetic energy and disperses it as heat. This substantially reduces distortion and allows the individual drive units to deliver their optimal performance, a pure and uncoloured sound. Stunning Sound, Luxury Looks Even the speaker’s attractive brushed aluminium facia plate is not purely decorative. It’s part of an assembly, which clamps a butyl rubber sheet to the front panel to reduce cabinet resonance still further in the panel facing the listener. It is available in two beautiful multi-layered lacquered finishes in high gloss black and white. Multiple positions are possible thanks to a foam bung, which can be inserted in the rear-mounted reflex port modifying the bass response to suit positioning against a rear wall or close to a corner, to fit seamlessly into your chosen room. Critically Acclaimed by Industry Experts These clever bookshelf speakers have won multiple awards including What Hi Fi - Product of the Year, Hi Fi Choice - Editors Choice and AV Forums - Highly Recommended Award demonstrating that these speakers deliver genuine 'high end' sonic performance. Key Features: The Concept 20 changes everything. Its revolutionary ‘GelcoreTM Construction’ cabinet means music lovers can enjoy genuine ‘high end’ sonic performance and with the option of either lacquered gloss black, or lacquered gloss white; not only will the speakers sound amazing, they will also look beautiful. Enclosure type: 2-way reflex, Bass Unit: 125mm, Treble Unit: 25mm Frequency Response (+/- 3 dB): 64Hz - 22kHz, Nominal Impedance: 6ohm, Minimum Impedance: 4ohm Sensitivity: 88dB, Recommended Power: 25 - 75w, Crossover Frequency: 2.9kHz Includes: (2) Concept 20 Bookshelf Speakers, (2) Speaker Grills, (2) Port Bungs, (1) User Manual

An Innovative Solution The Concept 20 represents the start of a new era going beyond anything that Q Acoustics had achieved before. It's a beautifully styled product, which we confidently believe provides a level of sonic performance previously thought impossible at its price point. To achieve this extraordinary result, Q Acoustics' design team applied advanced technology to address cabinet resonance, widely recognised as the single biggest hurdle preventing 'high end' sonic performance. This State-of-the-Art, ultra-low resonance and beautifully lacquered cabinet design allows the 125mm drive unit and wide dispersion 25mm tweeter to perform at their very impressive best. Ultra-Low Resonance Cabinet Design The Concept 20 uses GelcoreTM Cabinet Construction, where two layers of MDF, are separated by a bespoke, resonance absorbing, non-setting adhesive which converts the kinetic energy and disperses it as heat. This substantially reduces distortion and allows the individual drive units to deliver their optimal performance, a pure and uncoloured sound. Stunning Sound, Luxury Looks Even the speaker’s attractive brushed aluminium facia plate is not purely decorative. It’s part of an assembly, which clamps a butyl rubber sheet to the front panel to reduce cabinet resonance still further in the panel facing the listener. It is available in two beautiful multi-layered lacquered finishes in high gloss black and white. Multiple positions are possible thanks to a foam bung, which can be inserted in the rear-mounted reflex port modifying the bass response to suit positioning against a rear wall or close to a corner, to fit seamlessly into your chosen room. Critically Acclaimed by Industry Experts These clever bookshelf speakers have won multiple awards including What Hi Fi - Product of the Year, Hi Fi Choice - Editors Choice and AV Forums - Highly Recommended Award demonstrating that these speakers deliver genuine 'high end' sonic performance. Key Features: The Concept 20 changes everything. Its revolutionary ‘GelcoreTM Construction’ cabinet means music lovers can enjoy genuine ‘high end’ sonic performance and with the option of either lacquered gloss black, or lacquered gloss white; not only will the speakers sound amazing, they will also look beautiful. Enclosure type: 2-way reflex, Bass Unit: 125mm, Treble Unit: 25mm Frequency Response (+/- 3 dB): 64Hz - 22kHz, Nominal Impedance: 6ohm, Minimum Impedance: 4ohm Sensitivity: 88dB, Recommended Power: 25 - 75w, Crossover Frequency: 2.9kHz Includes: (2) Concept 20 Bookshelf Speakers, (2) Speaker Grills, (2) Port Bungs, (1) User Manual

Key Features The Concept 40 is Q Acoustics' flagship floor-standing speaker delivers an unparalleled sonic performance. The Concept 40's extraordinary soundstage, dynamics and sheer musicality is achieved by incorporating its bespoke drive units into a 'GelcoreTM Construction' cabinet which allows the drive units to perform at their very impressive best. Enclosure Type: 2-Way Reflex with Double Woofer, Bass Unit: 2 x 125mm, Treble Unit: 25mm, Frequency Response (+/- 3 dB): 53Hz - 22kHz, Nominal Impedance: 8ohm, Minimum Impedance: 4ohm, Sensitivity: 90dB, Crossover Frequency: 2.3kHz Conceptualising the Floorstanding Speaker In common with the Concept 20, its award-winning sibling, the Concept 40's extraordinary soundstage, dynamics and sheer musicality is achieved by incorporating its bespoke drive units into a GelcoreTM Construction cabinet. This State-of-the-Art, ultra-low resonance and beautifully lacquered cabinet design allows the dual 125mm drive units and wide dispersion 25mm tweeter to perform at their very impressive best. The combination of high sensitivity for dynamics and increased bass extension for realism make the step up from bookshelf speakers, worthwhile. Ultra-Low Resonance Cabinet Design The Concept 40 uses GelcoreTM Cabinet Construction, where two layers of MDF, are separated by a bespoke, resonance absorbing, non-setting adhesive which converts the kinetic energy and disperses it as heat. This substantially reduces distortion and allows the individual drive units to deliver their optimal performance; a pure and uncoloured sound. Simple to Drive, Simple to Position With 90dB sensitivity and a nominal impedance of 8 ohms, the Concept 40 is easily driven by any good quality amplifier, providing effortless peaks and crescendos in music and movie soundtracks. Various locations for positioning the speaker in the listening room are catered for by providing a foam bung which can be inserted in the rear-mounted reflex port modifying the bass response to suit positioning against a rear wall or close to a corner. Stunning to Hear, Stunning to See These striking floorstanding loudspeakers are available in multi-layered lacquered black or white finishes. The elegant tripod stand allows the Concept 40 to achieve perfect rigidity and floor contact, which further enhances its performance. Even the speaker's attractive brushed aluminium facia plate is not purely decorative. It's part of an assembly, which clamps a butyl rubber sheet to the front panel to reduce cabinet resonance still further in the panel facing the listener.

Key Features The Concept 40 is Q Acoustics' flagship floor-standing speaker delivers an unparalleled sonic performance. The Concept 40's extraordinary soundstage, dynamics and sheer musicality is achieved by incorporating its bespoke drive units into a 'GelcoreTM Construction' cabinet which allows the drive units to perform at their very impressive best. Enclosure Type: 2-Way Reflex with Double Woofer, Bass Unit: 2 x 125mm, Treble Unit: 25mm, Frequency Response (+/- 3 dB): 53Hz - 22kHz, Nominal Impedance: 8ohm, Minimum Impedance: 4ohm, Sensitivity: 90dB, Crossover Frequency: 2.3kHz Conceptualising the Floorstanding Speaker In common with the Concept 20, its award-winning sibling, the Concept 40's extraordinary soundstage, dynamics and sheer musicality is achieved by incorporating its bespoke drive units into a GelcoreTM Construction cabinet. This State-of-the-Art, ultra-low resonance and beautifully lacquered cabinet design allows the dual 125mm drive units and wide dispersion 25mm tweeter to perform at their very impressive best. The combination of high sensitivity for dynamics and increased bass extension for realism make the step up from bookshelf speakers, worthwhile. Ultra-Low Resonance Cabinet Design The Concept 40 uses GelcoreTM Cabinet Construction, where two layers of MDF, are separated by a bespoke, resonance absorbing, non-setting adhesive which converts the kinetic energy and disperses it as heat. This substantially reduces distortion and allows the individual drive units to deliver their optimal performance; a pure and uncoloured sound. Simple to Drive, Simple to Position With 90dB sensitivity and a nominal impedance of 8 ohms, the Concept 40 is easily driven by any good quality amplifier, providing effortless peaks and crescendos in music and movie soundtracks. Various locations for positioning the speaker in the listening room are catered for by providing a foam bung which can be inserted in the rear-mounted reflex port modifying the bass response to suit positioning against a rear wall or close to a corner. Stunning to Hear, Stunning to See These striking floorstanding loudspeakers are available in multi-layered lacquered black or white finishes. The elegant tripod stand allows the Concept 40 to achieve perfect rigidity and floor contact, which further enhances its performance. Even the speaker's attractive brushed aluminium facia plate is not purely decorative. It's part of an assembly, which clamps a butyl rubber sheet to the front panel to reduce cabinet resonance still further in the panel facing the listener.