Rode

Designed for handheld interview and presentation applications, the Reporter features an omnidirectional dynamic capsule that is designed to allow the user freedom of use, without the technique related issues typical of directional end-address microphones. Additionally its frequency response has been specially tailored for voice reproduction, to maximise intelligibility and deliver crisp, clear results in almost any condition.The microphone features a durable die-cast aluminium alloy body coated in a discrete matte black anti-glare finish. An innovative multi-layer mesh basket protects the microphone from environmental noise without the need for a bulky and distracting foam wind shield. It is supplied with a removable microphone ‘flag’ that can accommodate high-visibility branding.The Reporter is covered by RØDE’s industry-leading support guarantee, with a twelve month warranty ‘out of the box’ that is easily increased to ten years free of charge, following online registration of the microphone.Specifications:Type: Dynamic Frequency response: 70Hz - 15kHz Sensitivity: -56.0dB re 1 Volt/Pascal (1.00mV   94 dB SPL) +/- 2 dB   1kHz Ιmpedance: 150ΩDimensions: 41.50mmW x 72.50mmH x 41.50mmD Weight: 256 gr

Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2' capsule, an active J-FET impedance converter with bipolar output buffer. Finished in durable satin nickel, the NT5 is intended for either single or stereo X/Y mic set-ups. The NT5 matched pairs comesupplied in a custom carry case with windshields and mounts. Externally biased condenserGold sputtered 1/2' capsuleHeavy-duty satin-nickel plated bodySurface mount circuitryLow noiseFull frequency response TypeCondenserPick Up PatternCardioidFrequency response20 Hz - 20 kHzSensitivity-38 dB re 1 Volt/Pascal (12 mV @ 94 dB SPL) +/- 2 dB @ 1kHzΙmpedance100ΩΤotal harmonic distortion-Dimensions (W x H x D)20mmW x118mmH x 20mmDWeight101gmAccessories- 

Stand mount for ΝΤ-5, ΝΤ-6, NTG-1, NTG-2 microphones

Foam wind shield for ΝΤ-1Α, ΝΤ-2Α, ΝΤ-1000, ΝΤ-2000, ΝΤΚ, Κ2, BroadCaster microphones.

Foam wind shield for NT-5 and NT-6 microphones.

Aluminium boom pole, expanding to 2.05m 

The RODE WS6 Deluxe Windshield is designed to reduce wind noise when recording in adverse environmental conditions.Suitable for the RΨDE NTG-1 and NTG-2, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4') and a diameter of 21-22.5mm.

The PG1 Cold Shoe Pistol Grip is a convenient and ergonomic way to operate your RØDE VideoMic or Stereo VideoMic independently of your video camera 

VXLR ADAPTER MET 1XLRM -> 1J3P35F RODE 

Shock mount with pop filter for Procaster, K2, NT-1A, NT-2A, Podcaster, NTK, NT1000 & NT2000 

The RODE MiConTM connector system provides seamless integration between the RΟDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems.The MICON-1 is designed to connect to the Sennheiser transmitters SK 500 G3, SK 300 G3, SK 100 G3, SK 500 G2, SK 300 G2, SK 2 Freeport

The RODE MiConTM connector system provides seamless integration between the RΨDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems.The MICON-3 is designed to connect to Shure transmitters UR1, UR1M, ULX1, SLX1, PGX1 and PG1.Shure and the Shure products listed are registered names and trademarks owned by Shure.

 The RODE MiConTM connector system provides seamless integration between the RΨDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems.The MiCon-5 is designed to connect to a standard 3 pin XLR, with P48 phantom power.

 The RODE MiConTM connector system provides seamless integration between the RΨDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems.The MICON-2 is designed to connect to a standard 3.5mm stereo minijack, with a power supply of 1V minimum.

The RODE MiConTM connector system provides seamless integration between the RΨDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems.The MICON-6 is designed to connect to AKG transmitters PT40, PT60, PT61, PT80, PT400, PT2000 and PT4000, as well as the Audix RAD-360.AKG, Audix and the AKG and Audix products listed are registered names and trademarks of their respective owners.

 The RODE Universal Blimp Mount is an interchangeable mounting adaptor for the RØDE Blimp windshield shock mounting system.It allows for simple and lightweight mounting of the Blimp onto a boom pole, boom stand or any other 3/8' thread mounting device. Weight: 60.00grDimensions (WxHxD): 95.00mm x 65.00mm x 45.00 mm

Stand mount for ΝΤ-2Α, ΝΤ-1000, ΝΤ-2000, ΝΤΚ, Κ2, Classic II, BroadCaster microphones

Stand mount for NT-3 and NT-4 microphones 

Rode M2, Live Performance Cardioid Condenser Microphone - heavy duty metal body, high RF rejection, mute switch, low handling noise, 35Hz-20kHz, 141dB max SPL, requires 24-48V phantom power.

Condenser microphone with cardioid polar pattern, frequency response: 40Hz-20kHz, 130dB SPL, 21dBA self noise, 200ohm impedance, status LED, high pass filter, includes windshield and stand mount. Suitable for recording strings, choirs and acoustic guitars. Requires 48V phantom power or 9V battery.

Aluminium boom pole precision machined 3m, 850gr

Καλάμι boom 0,84 έως 3m. 850gr με standard πάσσο 3/8

Featuring a tight polar pattern and tailored-for-voice frequency response, the RODE Procaster is perfect for every application where a great sounding, rugged microphone with superior ambient noise rejection is demanded.RΨDE Procaster main features include:Broadcast quality soundHigh output dynamic capsuleBalanced, low impedance outputInternal shock mounting of capsule for low handling noiseInternal pop-filter to reduce plosivesRobust, all metal constructionAcoustic Principle: DynamicDirectional Pattern: CardioidFrequency range: 75 Hz - 18 kHzOutput impedance: 320OSensitivity: -56 dB re 1 Volt/Pascal (1.6 mV @ 94 dB SPL) +/- 2 dB @ 1kHzWeight: 695gDimensions: 214mmH x 53mmW x 53mmD

The Rode M1 can be perfect for long tours as it is built very solid with a solid die-cast body and a sturdy dynamic capsule.The Rode M1 main features include:Live dynamic vocal microphoneHigh output dynamic capsuleGold plated XLR connectorsInternal pop-filter to reduce plosivesFeedback rejecting pick-up patternHeavy duty metal bodyLow handling noiseDesigned and manufactured in AustraliaLifetime Warranty

Shockmount  for Rode microphones ΝΤ-2Α, ΝΤ-1000, ΝΤ-2000, ΝΤΚ, Κ2, Classic II.

Like its name suggests this RODE microphone was specifically designed ‘ON-AIR’ applications where wide frequency response and low distortion are demanded. 
Winner of the Radio World/US National Association of Broadcasters (NAB) ‘What’s Cool’ award in 1998, the Broadcaster has become an industry standard when studio sound quality is required for on air applications. 
Utilizing an Australian designed and manufactured RΨDE 1” externally biased condenser transducers, the Broadcaster features a switch-able high pass filter to remove low frequency rumble. A unique ‘ON-AIR’ LED indicator can be switched “on” or “off” by shorting contacts on the 5 pin audio connector. This feature allows console operators to warn the ‘Talent’ that the mic is live.    •    Acoustic principle: Externally polarised 25mm (1”) condenser    •    Directional pattern: Cardioid    •    Frequency range: 20 Hz ~ 20 kHz    •    Output impedance: 40Ω    •    Signal noise ratio din iec 651: >80 dB (1kHz rel 1 Pa; per IEC651, IEC268-15)    •    Equvalent noise: 114 dB (per IEC651, IEC268-15)    •    Power supply voltage: P48, P24 phantom    •    Weight without battery: 577g    •    Weight with battery: 1.3kg    •    Dimensions width: 167mm    •    Dimensions depth: 50mm    •    Dimensions height: 50mm

The Stereo wonder. The new NT4, a visually striking microphone that solves the age-old problem of stereo recording by eliminating the need to purchase matched pairs and the associated complex set-up bars and adaptors to get professional results. With a fixed 90 Deg. X/Y configuration and perfectly matched stereo condenser capsules, the NT4 lets you record any source with immaculate stereo detail.

The NT4 has a 128 dB dynamic range, 143 dBA SPL and low self-noise. Offering selectable battery or phantom power operation with power indicator light, the NT4 is ideally suited to both studio and location recording.

The NT4 comes supplied in a custom carry case with a windshield, XLR to mini-jack and dual XLR cables for portable DAT or professional balanced input connection.    •    Directional pattern: Cardioid per capsule    •    Frequency range: 20Hz - 20kHz    •    Output impedance: 200Ohm per side    •    Signal noise ratio din iec 651: 78dB    •    Equvalent noise: 128 dB    •    Power supply voltage: P48 (38V–52V), P24 (20V-26V), P12 (10.8V-13.2V), 9V battery    •    Current consumption: 4 mA, 2 mA, 2.8 mA, 2.4mA    •    Weight without battery: 480g    •    Weight with battery: 2.3kg

The NT5 matched pairs are a masterpiece of small-diaphragm cardioid-condenser microphone design.

Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a .5” capsule, an active J-FET impedance converter with bipolar output buffer.

Finished in durable satin nickel, the NT5 is intended for either single or stereo X/Y mic set-ups. The NT5 matched pairs comesupplied in a custom carry case with windshields and mounts.     •    Acoustic principle: Externally polarised single diaphragm    •    Directional pattern: Cardioid    •    Frequency range: 20Hz - 20kHz    •    Output impedance: 100Ω    •    Signal noise ratio din iec 651: 78dB    •    Equvalent noise:

The world's first large diaphragm condenser studio microphone with seamlessly variable Polar Patterns, Filter and Pad located conveniently on the microphone body.

The NT2000’s state of the art surface-mount electronics combined with the new Australian designed and manufactured HF1 Capsule, provide extremely low self-noise (7 dBA) and a maximum SPL of 147 dB (157 dB with pad fully engaged) ensuring exceptional results and the ultimate in recording creativity.

The NT2000 is supplied with the SM2 Shock Mount, together in a durable custom carry case.     •    Acoustic principle: Externally polarised 25 mm (1”) dual diaphragm condenser    •    Directional pattern: Multipattern    •    Frequency range: 20Hz - 20KHz    •    Output impedance: 200 ohms    •    Signal noise ratio din iec 651: 87 dB (1kHz rel 1Pa)    •    Equvalent noise: 7 dBA SPL (per IEC651, IEC268-15)    •    Maximum spl: 147 dB (@ 1% THD into 1K ohm) 157dB (@ 1% THD into 1K ohm) with pad set to maximum    •    Sensitivity: -36 db re 1 Volt/Pasca (16 mv @94db SPL) +/- 2 dB    •    Dynamic range din iec 651: 140 dB (per IEC651, IEC268-15)    •    Power supply voltage: Phantom P48    •    Weight without battery: 831 gm    •    Weight with battery: 2.6 kg

The RΨDE NTK is the multi award-winning Class-A tube microphone that has found a home with tens of thousands of professionals around the world. 

The heart of the NTK is the Australian designed and manufactured HF-2 capsule.The electronic circuitry complementing this very sensitive transducer includes a hand-selected twin-triode 6922 valve and audiophile grade components and lay-out. The result is an ultra-wide dynamic range, very low noise, and stunning tube warmth. The NTK‘s rich valve sound is ideal for vocals, acoustic instruments, drum overheads, guitar amps and pianos.

The NTK comes with a dedicated power supply, internal capsule shock mounting, stand mount, zip pouch and a 30’ cable.

The VideoMic Me-L is compatible with all Apple iOS devices with a Lightning port and running iOS 11 or higherSpecifications:Acoustic Principle Pressure Gradient Electret CondenserActive Electronics n/aPolar Pattern CardioidFrequency Range 20Hz-20kHzSignal to noise Ratio 74.5 dBEquivalent Noise 19.5 dBA SPL (as per IEC651)Maximum SPL 115 dB SPL (1kHz @ 1m)Power Requirements Powered by iOS deviceOutput Connection Lightning, 3.5mm TRSAnalog Outputs 3.5mm TRS Headphone JackComputer Connectivity Lightning ConnectorSimultaneous I/O 1 in, 2 outBit Depth 24-bitSample Rates 44.1 and 48 kHzDirect Monitor YesBus Powered YesOS Requirements iOS 11Equivalent Input Noise @ Maximum Gain n/aMaterial AluminiumColour BlackWeight (g) 28 

Compact directional on-camera microphone powered via Lithium-Ion batteries, 2 x AA Batteries or Micro USB with automatic power function.Specifications:Acoustic Principle: Line GradientActive Electronics: JFET impedance converterCapsule: 0.55"Polar Pattern: SupercardioidFrequency Range: 20Hz-20kHz (selected HPF @75Hz/150Hz)Output Impedance: 200ΩMaximum SPL: 133dBSPLMaximum Output Level: 7.7dBu (@ 1kHz, 1% THD into 1KΩ load)Sensitivity: -33.6dB re 1 Volt/Pascal (21.20mV @ 94 dB SPL) +/- 2 dB @ 1kHzEquivalent Noise Level (A-weighted): 14dBAPower Options: Internal battery, USB bus powered, AA BatteryWeight: 122gDimensions: 111mm x 66mm x 170mmOutput: Minijack Output Includes:VideoMic Pro+ Compact Directional On-camera MicrophoneMicro USB cableLB-1 Lithium-Ion Rechargeable BatteryDetachable 3.5mm TRS Cable

The new Stereo VideoMic Pro provides a high quality stereo option for videographers, and is ideal for recording music, and the atmospheric ambience essential in building a realistic audio scene. Based around the all new capsule with its matched pair of high sensitivity ½”cardioid condensers in a coincident XY pair, the Stereo VideoMic Pro provides a wide stereo image with natural depth.Another new addition is the integrated Rycote® Lyre® based shock mounting system, which separates the Stereo VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.The Stereo VideoMic Pro, with its ergonomic form factor, make it perfectly suited to DSLR, consumer camcorders and large-sensor video cameras. The newly designed Kevlar reinforced braided cable, as well as the improved foam windscreen, provides excellent acoustic decoupling from the camera and offers significantly lower noise transference and higher sensitivity.The user friendly designed rear of the microphone body features the power and equalisation controls, including a high pass filter at 75Hz which is designed to cut out the noise generated by air conditioning, traffic and other undesirable low frequency interference.A -10dB PAD allows the user to reduce the sensitivity of the microphone, making it suitable for recording loud sound sources such as live music or at sporting events.Like the VideoMic Pro, the Stereo VideoMic Pro features a +20dB level boost specifically designed to provide a higher quality signal with DSLR cameras. When activated, the typically low quality camera preamp level can be reduced, resulting in a lower noise floor and much clearer recording.Features:Rycote® Lyre® shock mounting onboardBroadcast recording quality on-camera microphoneAll new matched pair 1⁄2” condenser capsules in XY stereo configurationImproved foam windscreenUltra lightweight, compact form factorOn mic power and EQ controlsTwo step High Pass Filter (flat, 75Hz)Three position level control (-10dB, 0, +20dB)9V battery powered - over 100 hours use (alkaline)New Kevlar reinforced braided cableBilleted metal camera shoe mount with 3/8” thread for easy boompole mountingSpecifications:Acoustic Principle: Pressure GradientActive Electronics: JFET impedance converterCapsule: 0.50"Address Type: EndFrequency Range: 40Hz - 20kHzOutput Impedance: 200ΩMaximum SPL: 134dB SPL (@ 1kHz, 1% THD into 1KΩ load)Sensitivity: -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHzEquivalent Noise Level (A-weighted): 18dB-AWeight: 116gmDimensions: 134mmH x 80mmW x 115mmD 

The VideoMic Me is a compact and lightweight, high-quality directional microphone with that connects directly to the iPhone TRRS microphone/headphone socket. Its flexible mounting bracket accommodates a wide range of smartphones and allows the microphone to be fitted for primary camera or front camera ('selfie') use. A 3.5mm headphone jack on the rear allows for play-through of audio while recording (app dependent) as well as easy playback of your videos without having to remove the microphone. The VideoMic Me includes a deluxe furry windshield for shooting outdoors or in adverse weather.Specifications:Acoustic Principle: Pressure GradientActive Electronics: JFET impedance converterCapsule: 0.50"Polar Pattern: CardioidAddress Type: EndFrequency Range: 100Hz - 20kHzMaximum SPL: 140dB SPL (@ 1kHz, 1% THD into 1KΩ load)Sensitivity: -33.0dB re 1 Volt/Pascal (22.00mV @ 94 dB SPL) +/- 2 dB @ 1kHzEquivalent Noise Level (A-weighted): 20dB-AWeight: 34gmDimensions: 38mmH x 21mmW x 80mmDOutput: TRRS Output

Rode VideoMic Pro Super Cardioid Condenser Microphone with Rycote OnboardFeatures:All new capsule with lower noise and higher sensitivityCompact form factor (150mm)9V battery powered - over 70 hours use (alkaline)Integrated foam windscreenTwo step High Pass Filter (flat, 80Hz)Camera shoe mount with 3/8" thread for easy boompole mountingRycote Lyre shock mounting onboardBroadcast recording quality condenser microphoneUltra lightweight (85g)Integrated shock mounting3.5mm stereo mini-jack output (dual mono)Three position level control (-10dB, 0, +20dB)10 year warranty with online registration at www.rodemic.com/warranty

The NTG4 builds on the platform created by RODE's award-winning NTG1 shotgun microphone. A broadcast-quality directional condenser microphone designed to provide premium audio recording in a versatile range of applications including on-camera and boom mounted.

Building on the popularity and acceptance of the RODE NTG2, the NTG4+ features an all-new condenser capsule with low noise, high sensitivity and the convenience of on-board equalisation/level control via digital switching. The NTG4+ is the very first microphone to feature an in-built battery that provides 150+ hours of operation with the convenience of USB charging.Features:Broadcast sound qualityLow noise circuitryInternal rechargeable lithium battery, supplying over 150 hours operationFully charged in under two hours via MicroUSBRugged metal constructionConvenient digital switchingHigh Frequency BoostHigh Pass Filter (Flat/75Hz)PAD (-10db)MicroUSB cable included 

Compact Audio InterfaceThe AI-Micro is an ultra-compact dual-channel interface for recording high-quality audio to a mobile device or computer. Featuring two auto-sensing inputs for connecting virtually any microphone with a 3.5mm output, headphone monitoring, a universal USB output for use with smartphones, tablets and computers, and compatibility with RØDE apps for supercharged sound, the AI-Micro allows you to record without limits.  Key Features:Ultra-compact dual-channel audio interface for computers and mobile devices  Compatible with virtually any microphone with a 3.5mm output, including RØDE VideoMics, lavaliers, wireless systems and stereo microphones​Auto-sensing inputs for connecting TRS or TRRS microphones High-quality headphone output for zero-latency audio monitoring and playback Connects seamlessly to computers, smartphones and tablets via the universal USB output (USB-A, USB-C and Lightning cables supplied) Compatible with the RØDE app suite for expanded features and functionality, on-the-go configuration and broadcast-quality recording on any device Incredible Audio, Anywhere  The AI-Micro allows you to capture high-quality audio on your mobile or computer with ease. It features two 3.5mm inputs for connecting a wide range of microphones, including RØDE VideoMics, lavaliers, wireless systems like the Wireless GO. These are auto-sensing inputs that detect whether a TRS or TRRS microphone is connected and automatically adapt to accommodate – no adaptors needed. Input 1 can also be configured as a single stereo TRS input for use with stereo microphones. High-quality microphone preamps and high-resolution (24-bit/48kHz) recording ensure crystal-clear audio capture on any device, with a headphone output for echo-free audio monitoring and playback. Whether you're interviewing, podcasting, presenting, or livestreaming, record incredible audio anywhere with the AI-Micro. Universal Compatibility With All Your DevicesThe AI-Micro can connect seamlessly to all your devices via its universal USB output. It is supplied with USB-A, USB-C and Lightning cables, so you can get recording instantly, and is plug-and-play compatible with Mac, Windows, iOS and Android devices. Portable recording has never been easier.Pocket-sized PortabilityWeighing less than 20 grams, the AI-Micro is extremely compact and lightweight. Just add two lavalier microphones and you have a complete, studio-quality recording setup that fits in your pocket. Perfect for interviewing in the field, on-the-go podcasting, and making video calls or livestreaming at home.  AI-Micro User GuideThe AI-Micro User Guide explains everything you need to know about using your AI-Micro. This comprehensive guide covers everything from getting started through to updating device firmware and how to access expanded features and functionality with the RØDE app suite, including RØDE Connect, RØDE Reporter and RØDE Central.

Single-channel Audio InterfaceThe AI-1 is a professional-grade single-channel audio interface that delivers exceptional audio quality for everything from bedroom music recording to livestreaming and podcasting. Featuring a studio-grade preamp, a high-quality Neutrik™ combo jack for connecting microphones or instruments, and a high-power headphone amplifier for crystal-clear audio monitoring and playback, it’s the perfect interface for recording studio-quality audio at home.Studio-quality Sound With EaseWith a single input and streamlined controls, the AI-1 is incredibly simple to use – just connect it to your computer, plug in your microphone or instrument, and hit record. Under the hood, the AI-1 packs plenty of punch, including an ultra-low-noise, high-gain studio-grade preamp for recording pristine audio, balanced ¼-inch outputs for connecting your favourite speakers, and a high-power headphone amplifier capable of driving professional high-impedance models for flawless monitoring.Get Connected and CreateThe AI-1 features a high-quality Neutrik combo jack for connecting both XLR and ¼-inch cables, so you can plug in your microphone, guitar, bass, or synthesiser with ease. Switchable phantom power ensures any microphone is accommodated, while the simple indicator LED allows you to monitor your input level for crystal-clear audio every time. Every AI-1 also comes with a free version of Ableton Lite, so you can get recording right away. Whether you’re livestreaming or making multi-layered music, the AI-1 will capture your sonic vision in every detail.RØDE CentralRØDE Central is an easy-to-use companion app for the AI-1 (and other RØDE devices) that allows you to access device information and update to the latest firmware. The latest firmware version adds an extended gain range for enhanced performance with low-output dynamic microphones. To update, download RØDE Central below and follow the prompts.Note: OS Requirements – MacOS 10.13 or later; Windows 10 Version 1803 or later; iOS 14 or later; Android 9.0 or later.

The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. A directional microphone, the VideoMicro reduces distracting peripheral sounds and focusses on the audio in front of the camera. Its pickup is more forgiving than RODE’s other on-camera microphones providing a more natural sound when recording indoors. Perfect for capturing incredible audio to accompany inspiring vision. The microphone body is made from aluminum, giving it a high level of RF rejection, and is finished in RODE’s high-grade ceramic anti-glare black coating. Included with the VideoMicro is a camera shoe mount featuring a Rycote Lyre shock mount. Featuring a suspension structure composed of a hard-wearing thermoplastic, it is far more effective at minimising unwanted vibrations, handling and cable-borne noise than traditional elastic suspensions. Virtually indestructible, the Rycote Lyre will never sag, snap, wear out or require rethreading to maintain its effectiveness. Also included is the WS9 synthetic furry wind shield with foam inner cell, designed for use in outdoor scenarios where wind and environmental noise can inhibit recordings. Optionally available is the RODE SC7, a TRS to TRRS cable that allows the VideoMicro to be used with smartphones, to capture crystal clear, directional sound for video and video applications such as Periscope.Compact size and lightweight - only 80mm (3’) long and 42gm (1.5oz)All-metal microphone bodyNo battery required (powered by camera plug-in power - min 3V)Rycote® Lyre® shock mount includedDeluxe furry windshield includedDesigned and manufactured in AustraliaThe camera of the photograph is not included.

The smartLav+ is a broadcast-grade wearable microphone designed for use in a wide range of applications, from the boardroom to the pulpit, the car to the classroom.   The RØDE smartLav+ uses a standard TRRS connection, which plugs directly into your smartphone or tablet's headset input. Compatible with the iPhone, iPad and iPod touch, in addition to a wide range of TRRS devices.By employing an omni-directional capsule that picks up sound equally from all around the microphone, the smartLav+ can be mounted in a variety of positions and orientations on the subject. The smartLav is fully compatible with the iPhone 5S, iPhone 5, iPhone 5C, iPhone 4S, iPhone 4, iPad Air, iPad (3rd generation), iPad 2, iPad mini and iPod touch (5th generation).

The RODE VideoMic is everything you need to recordcrystal clear audioto match the high definition video of todays cameras. The VideoMic is designed for simplicity of operationso you don't need to be an expert to get professional results. The RΟDE VideoMic is a professional grade shotgun microphone. Based on the latest ‘Film industry’ technology, the VideoMic is designed specifically for use with high quality Digital Video Cameras. The microphone exhibits low noise and an unusually wide bandwidth for its size. It is ultra lightweight, yet rugged due to it’s ABS construction. The VideoMic is powered by a standard 9 V battery and offers a Low Battery LED status indicator and a switchable high pass filter to reduce unwanted low frequency rumble. The VideoMic attaches to any Camcorder that has the standard camera-shoe fitting and utilizes a stereo mini jack for audio output. Frequency response40Hz-20kHz, selectable HPF @ 80Hz/12dB/octaveSensitivity-38 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHzΙmpedance200ΩΤotal harmonic distortion134dB SPL (@ 1kHz, 1% THD into 1KΩ load)Dimensions250mm x 65mmx 102mmWeight176gm 

The new RODE NTG-1 is a lightweight condenser shotgun microphone, specifically designed for professional applications within the film, video, television, voice-over and ENG industries. The NTG-1 provides an electronically balanced output stage and operates on 48 V to the P48 standard. The NTG-1 offers wide bandwidth and a controlled polar response coupled with low noise SMT electronics. The NTG-1 is extremely lightweight making it ideal for mounting directly to video cameras (with optional accessories) or a Boom pole.The NTG-1 comes complete with mount and windshield. The supplied windscreen effectively suppresses wind noise when recording outdoors in moderate conditions. Optional accessories are available for more demanding applications.

The perfect suspension shock mount for the Procaster or Podcaster, the PSM-1 removes the ability for external vibrations to manipulate the microphones positioning.The PSM-1 gives you a sense of confidence when using your microphone in environments where there is a lot of movement that may interfere with the microphones performance.  

The RØDE Lavalier is a discreet lavalier or lapel style microphone that provides simple and intuitive audio in any application.The Lavalier's low self noise, user friendly omni-directional polar pattern and minimal appearance make it an ideal solution for film, television, video, theatre, house of worship and anywhere where a high quality microphone needs to be heard but not seen.The microphone capsule is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance.The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the included cable management clips ensure that you are able to minimise the microphone and cable visibility, while providing maximum mobility for the wearer. Included AccessoriesΑntitrauma caseWS-LAVMinifur LAVMicon cableLAV clipSpanner