100 Volts Amplifiers

The CEP series are professional 70/100V multi-channel energy-efficient amplifiers. The one unit height device comes into two models. The CEP408 offers four channels and has an output power of 80 Watt. Both low impedance as 70/100V, deliver high-quality amplification distributed over multiple zones in various applications. With its compact and lightweight design, the CEP series is designed with high efficiency and reliability by providing input linking through miniature switches at the back of the device in combination with Class-D amplifier technology. These switches allow daisy linking inputs from one channel to another by simply pressing the switch.The highly efficient Class-D amplifier technology delivers an uncompromised sound experience in the most effective way. The input connections are performed with 3-Pin Terminal block connectors while the output connections are performed with a 4-pin Terminal block connector.The multi-channel amplifier is Energy Star compliant yet can be enabled or disabled with a standby switch on the back of the device. This amplifier is an HE (1RU) 19” unit. In order to ensure maximum installer/maintenance convenience, the CEP is passively cooled.Same power, less energy usageThese multi-channel amplifiers are ENERGY STAR® compliant yet can be enabled or disabled with a standby switch on the back of the device, which enables or disables the 'Auto standby mode’.Silent passive coolingIn order to reach maximum installer and maintenance convenience all CEP series devices are fully passively cooled. This is an energy-efficient and silent solution for its cooling needs.Uncompromised sound experienceThe highly efficient Class-D amplifier technology delivers an uncompromised sound experience in the most effective way. Miniature switches at the back allow you to daisy link inputs from one channel to another by just a single press on the switch.Amplification for any applicationThese both low impedance as 70/100V amplifiers are designed to deliver high-quality amplification, distributed over multiple zones, like small offices, retail or a school environment.

The CEP series are professional 70/100V multi-channel energy-efficient amplifiers. The one unit height device comes into two models. The CEP408 offers four channels and has an output power of 80 Watt. Both low impedance as 70/100V, deliver high-quality amplification distributed over multiple zones in various applications. With its compact and lightweight design, the CEP series is designed with high efficiency and reliability by providing input linking through miniature switches at the back of the device in combination with Class-D amplifier technology. These switches allow daisy linking inputs from one channel to another by simply pressing the switch.The highly efficient Class-D amplifier technology delivers an uncompromised sound experience in the most effective way. The input connections are performed with 3-Pin Terminal block connectors while the output connections are performed with a 4-pin Terminal block connector.The multi-channel amplifier is Energy Star compliant yet can be enabled or disabled with a standby switch on the back of the device. This amplifier is an HE (1RU) 19” unit. In order to ensure maximum installer/maintenance convenience, the CEP is passively cooled.Same power, less energy usageThese multi-channel amplifiers are ENERGY STAR® compliant yet can be enabled or disabled with a standby switch on the back of the device, which enables or disables the 'Auto standby mode’.Silent passive coolingIn order to reach maximum installer and maintenance convenience all CEP series devices are fully passively cooled. This is an energy-efficient and silent solution for its cooling needs.Uncompromised sound experienceThe highly efficient Class-D amplifier technology delivers an uncompromised sound experience in the most effective way. Miniature switches at the back allow you to daisy link inputs from one channel to another by just a single press on the switch.Amplification for any applicationThese both low impedance as 70/100V amplifiers are designed to deliver high-quality amplification, distributed over multiple zones, like small offices, retail or a school environment.

Uncommon strength, common senseThe SCP series is a range of extremely powerful compact dual-channel power amplifiers for commercial use. These half 19” devices can be used in stereo low impedance or 70/100V bridge mode. There are 3 different models to serve a wide range of applications with power ratings that vary between 240W up to 600W in a half 19” rack space housing.The compact and elegant design of the half 19” rack space enclosure allows for single installation in a 10.5” equipment rack, or side-by-side (two devices) in a 19” equipment rack. Of course, desktop installation or mounting in an equipment rack using the MBS310 series mounting adapters is possible.You may wonder if so much power in such a small enclosure could cause some heating issues? Not at all, the SCP series is designed in a unique way so that optimal cooling is established, this by active cooling on the SCP224 and SCP230 in order to improve thermal comfort without the need for additional actions.A connection to the WP2xx series input wall panels or volume controllers can be made via the RJ45 connector on the back of the SCP. This allows for a cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.Equipped with a standby mode switch, the SCP series will enter an energy-saving standby mode after a period of inactivity making him unique in the market. This feature together with the overall energy-efficient design makes the SCP meet the high standards of the Energy Star certification.When you combine the SCP series with a suitable pre-amplifier or wall-mounted input panel you create a relatively powerful and complete solution for background music installations.WP2xx & VC seriesThese input wall panels or volume controllers can be connected via a RJ45 connector on the back of the SCP. A cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.Optimal coolingSo much power in such a small enclosure could cause some heating issues? Not at all, the SCP series are designed in a unique way so that optimal cooling is established, passive cooling on the SCP212 and active cooling on the SCP224 and SCP230.Same power, less energyOptimal power consumption with ENERGY STAR® compliant standby-functionality, easy controllable with a switch on the back of the device. Enable or disable the 'Auto standby mode' whenever you like.

Uncommon strength, common senseThe SCP series is a range of extremely powerful compact dual-channel power amplifiers for commercial use. These half 19” devices can be used in stereo low impedance or 70/100V bridge mode. There are 3 different models to serve a wide range of applications with power ratings that vary between 240W up to 600W in a half 19” rack space housing.The compact and elegant design of the half 19” rack space enclosure allows for single installation in a 10.5” equipment rack, or side-by-side (two devices) in a 19” equipment rack. Of course, desktop installation or mounting in an equipment rack using the MBS310 series mounting adapters is possible.You may wonder if so much power in such a small enclosure could cause some heating issues? Not at all, the SCP series is designed in a unique way so that optimal cooling is established, this by active cooling on the SCP224 and SCP230 in order to improve thermal comfort without the need for additional actions.A connection to the WP2xx series input wall panels or volume controllers can be made via the RJ45 connector on the back of the SCP. This allows for a cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.Equipped with a standby mode switch, the SCP series will enter an energy-saving standby mode after a period of inactivity making him unique in the market. This feature together with the overall energy-efficient design makes the SCP meet the high standards of the Energy Star certification.When you combine the SCP series with a suitable pre-amplifier or wall-mounted input panel you create a relatively powerful and complete solution for background music installations.WP2xx & VC seriesThese input wall panels or volume controllers can be connected via a RJ45 connector on the back of the SCP. A cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.Optimal coolingSo much power in such a small enclosure could cause some heating issues? Not at all, the SCP series are designed in a unique way so that optimal cooling is established, passive cooling on the SCP212 and active cooling on the SCP224 and SCP230.Same power, less energyOptimal power consumption with ENERGY STAR® compliant standby-functionality, easy controllable with a switch on the back of the device. Enable or disable the 'Auto standby mode' whenever you like.

Uncommon strength, common senseThe SCP series is a range of extremely powerful compact dual-channel power amplifiers for commercial use. These half 19” devices can be used in stereo low impedance or 70/100V bridge mode. There are 3 different models to serve a wide range of applications with power ratings that vary between 240W up to 600W in a half 19” rack space housing.The compact and elegant design of the half 19” rack space enclosure allows for single installation in a 10.5” equipment rack, or side-by-side (two devices) in a 19” equipment rack. Of course, desktop installation or mounting in an equipment rack using the MBS310 series mounting adapters is possible.You may wonder if so much power in such a small enclosure could cause some heating issues? Not at all, the SCP series is designed in a unique way so that optimal cooling is established, this by passive cooling on the SCP212 in order to improve thermal comfort without the need for additional actions.A connection to the WP2xx series input wall panels or volume controllers can be made via the RJ45 connector on the back of the SCP. This allows for a cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.Equipped with a standby mode switch, the SCP series will enter an energy-saving standby mode after a period of inactivity making him unique in the market. This feature together with the overall energy-efficient design makes the SCP meet the high standards of the Energy Star certification.When you combine the SCP series with a suitable pre-amplifier or wall-mounted input panel you create a relatively powerful and complete solution for background music installations.WP2xx & VC seriesThese input wall panels or volume controllers can be connected via a RJ45 connector on the back of the SCP. A cost-effective plug & play solution to extend or introduce brand new input possibilities and control options.Optimal coolingSo much power in such a small enclosure could cause some heating issues? Not at all, the SCP series are designed in a unique way so that optimal cooling is established, passive cooling on the SCP212 and active cooling on the SCP224 and SCP230.Same power, less energyOptimal power consumption with ENERGY STAR® compliant standby-functionality, easy controllable with a switch on the back of the device. Enable or disable the 'Auto standby mode' whenever you like.

Οι AMP35E και AMP60E είναι επαγγελματικοί ενισχυτές με μίκτη 35W ή 60W με έξοδο σταθερής τάσης (70 / 100V) ή σταθερή αντίσταση (4 / 8Ω). Αυτή η σειρά ενισχυτών έχει σχεδιαστεί για να ικανοποιεί τις ανάγκες ενός μεγάλου εύρους εγκαταστάσεων commercial ήχου με τον πιο ευέλικτο και επαγγελματικό τρόπο. Η σειρά έχει σχεδιαστεί για να εγγυηθεί τη μέγιστη αξιοπιστία σε παρατεταμένη χρήση.Γενικά χαρακτηριστικά :• Κύκλωμα προστασίας υπερφόρτωσης και βραχυκυκλώματος ηχείων• Ένδειξη εκκίνησης LED• (Master) Main level control• Xωριστά level controls για είσοδο 1 , 2 και AUX• Ρύθμιση μπάσων και πρίμων• 2 είσοδοι MIC / MIC Phantom 48V / LINE balanced σε τερματικά Euroblock• 1 AUX Line RCA Input• MIC 1 Input με λειτουργία προτεραιότητας• 4 έξοδοι, δύο σε σταθερή αντίσταση (8 / 4Ω) και δύο σε σταθερή τάση (70 / 100V)Προδιαγραφές :Μοντέλο: AMP60EΙσχύς εξόδου RMS 60 WΕίσοδοι 2x MIC / PH / LINE (3,5 mm EUROBLOCK) 1x AUX (RCA L & R)Ευαισθησία εισόδου MIC: -50 dBv / 1 kΩ balanced PH: όπως παραπάνω με φανταστική τροφοδοσία 24V LINE: -10 dBv / 100 kΩ balanced AUX: -10 dBv / 47 kΩ unbalancedΧειριστήρια MASTER VOLUME CONTROL 1 TREBLE TONE CONTROL 1 BASS TONE CONTROL 2 MIC / LINE VOLUME CONTROLS 1 AUX VOLUME CONTROL 1 ΠΡΟΤΕΡΑΙΟΤΗΤΑ στο MIC / LINE 1Tone Controls Shelving +/- 10 dB @ 10 kHz Ράφια +/- 10 dB @ 100 HzΈξοδος ηχείων 100 / 70V / 8Ω / 4ΩBύσμα εξόδου 5,08 mm EUROBLOCKΑπόκριση συχνότητας 60Hz -20KHz (-3dB)Παραμόρφωση (THD)

The COM108 is a compact but versatile public address mixing amplifier which offers solutions for small to medium size audio systems in commercial installations. Typical application are background music systems in retail stores, bars, restaurants and office buildings. The compact and simple design allows installation in any location and operation through any possible user. The amplifier is designed using Class-D amplifier technology and delivers an output power of 80 Watt to constant voltage (100V and 70V) or low impedance (4 Ohm) audio systems. A switch mode power supply allows compatibility with a wide variation of mains voltages for global compatibility. A stereo line input allows connection for a wide variation of audio sources such as media players, radio tuners, internet audio players, ... and many more. A balanced mic / line input allows connection for an announcement microphone with compatibility for condenser microphones using the integrated phantom power supply (15V). A priority switch overrides the background music when enabled, and compatibility with voice file players is guaranteed by the wide gain adjustment possibility (0 dB - +50 dB). The COM108 is a table-top standing device, while rack mounting in 10.5" or 19" equipment racks is possible using an optionally available mounting set (MBS310).

The COM104 is a compact but versatile public address mixing amplifier which offers solutions for small to medium size audio systems in commercial installations. Typical applications are background music systems in retail stores, bars, restaurants and office buildings. The compact and simple design allows installation in any location and operation through any possible user. The amplifier is designed using Class-D amplifier technology and delivers an output power of 40 Watt to constant voltage (100V and 70V) or low impedance (4 Ohm) audio systems. A switch mode power supply allows compatibility with a wide variation of mains voltages for global compatibility. A stereo line input allows connection for a wide variation of audio sources such as media players, radio tuners, internet audio players, ... and many more. A balanced mic/line input allows connection for an announcement microphone with compatibility for condenser microphones using the integrated phantom power supply (15V). A priority switch overrides the background music when enabled, and compatibility with voice file players is guaranteed by the wide gain adjustment possibility (0 dB - +50 dB). The COM104 is a table-top standing device, while rack mounting in 10.5" or 19" equipment racks is possible using an optionally available mounting set (MBS310).

The COM12 is a public address amplifier, with a power up to 120 W. It contains a wide variation of input possibilities for all kinds of connection purposes, such as 2 unbalanced stereo line level inputs which are switchable between Line and Microphone level, 2 balanced inputs which are switchable between Line and Microphone level, and two balanced inputs which are selectable between Line and Microphone level with priority settings and phantom power.

The COM24 is a public address amplifier, with a power up to 240 W. It contains a wide variation of input possibilities for all kinds of connection purposes, such as 2 unbalanced stereo line level inputs which are switchable between Line and Microphone level, 2 balanced inputs which are switchable between Line and Microphone level, and two balanced inputs which are selectable between Line and Microphone level with priority settings and phantom power.