Power Conditioners

Featuring the Furman IT-REF 16 E I Discrete Symmetrical AC Power Source (16A, 230 VAC). This power source filter is built with many revolutionary technologies such as Linear Filtration Technology (LiFT), Discrete Symmetrical Balanced Power, and Power Factor Technology. These technological developments help eliminate equipment failure, reduce differential AC noise, and extreme voltage spikes. This conditioner can be used in studios, live sound, broadcast facilities, and home theaters.Furman’s filtration technology (LiFT) suppresses linear AC noise evenly across a very wide bandwidth. Resulting in a lower noise floor for the user’s audio system, better picture on video displays, and protection from the possibility of data corruption or loss. It dramatically reduces differential AC noise while feeding the users devices clean, filtered AC power. The IT-REF 16 E I ensures consistent peak performance from the user’s equipment.The Discrete Symmetrically Balanced Power technology from Furman splits incoming voltage (230V on the line terminal and 0V on the neutral and ground) into perfect halves on the transformer’s output. With 115V on the line and 115V on the neutral, the new center-tapped ground remains at 0V AC. Ensuring that connected equipment is free of AC ground contamination from the power amplifier. Furman's newly refined Dual-Screen Transformers also turnout the widest bandwidth of noise-reduction possible. Which enables the IT-REF 16 E I to provide unprecedented levels of audio and video detail.Furman has also designed Power Factor Technology to help power amplifiers to accurately reproduce audio signals while sounding their best. This technology does so by supplying a momentary current reservoir which provides over 80 amps of peak current and lowers the AC line impedance for power amplifiers.Series Multi-Stage Protection (SMP) offers protection to connected equipment from daily exposure to, even the highest level, of spikes and surges. SMP absorbs the surges without deterioration of the circuit or contamination to the ground line. It maximizes the longevity of connected equipment, provides peak performance, and minimizes the risk of downtime or failure.With all of these technologies and features, the IT-REF 16 E I is a smart addition to any AV system. Bringing faster sonic transients, crisper colors, greater gray and black scale definition to the users displays. While relaying pure harmonics and ambiance in the systems audio.

POWER CONDITIONER / SMART SEQUENCER 230V/ SMPSMP (Series Multi-Stage Protection Plus)Surge Protection - Series Multi-Stage Protection Technology provides the highest level of surge & spike protection available.LiFT (Linear Filtering Technology)Noise Filtration - Linear Filtration Technology reduces AC noise linearly across a very wide bandwidth for unequaled audio & video clarity.E.V.S. (Extreme Voltage Shutdown)Voltage Protection - Extreme Voltage Shutdown circuity safely powers down itself and connected equipment during unsafe voltage periods.

DC Block 6 is designed to improve the quality of AC electricity that powers audio and AV systems.Electrical current has a fundamental effect on the audio signal as it passes through a system, from the source and amplifiers to the speakers.The supply in a typical home is subject to interference caused by a number of problems, causing the AC waveform to be distorted before it reaches each device. This creates noise in the audio signal, which degrades the sound quality – a situation that continues to be demonstrated as more and more devices are added to the electric home's electrical network.DC power supplyA common problem is 'mains DC' – a problem known to affect the performance of audio equipment, especially amplifiers. In theory, the electrical current we receive from the outlets in our homes should be pure AC, with a perfectly symmetrical sine wave that alternates between positive and negative phases.DC voltageAC power transformers commonly used in home audio equipment cannot tolerate the presence of significant DC voltage levels without compromise. Less than 500 mV DC - typical in an average household power supply - can be enough to saturate transformers of the kind often found in amplifiers, which adversely affects sound performance and can cause audible mechanical vibration.The audiolab DC BLOCK 6 is a six-way solution to this very common problemBy blocking or canceling the DC voltage found in the AC supply, the DC BLOCK 6 corrects the DC offset and rebalances the grid sine wave. However, dealing with 'DC to mains' is not the only benefit this double-acting device offers – it also contains a high-performance audio-grade filtering circuit that removes RFI/EMI contaminants from the power supply. This is effective at reducing both differential-mode noise (exacerbated by the cheap switch-mode power supplies used by many home appliances) and common-mode noise (exacerbated by airborne interference from phones, Wi-Fi and Bluetooth networks).A specialized six-way power optimizer of such impressive efficiency, the DC 6 block is available in black or silver. It comes with a full set of power cables – six IEC C14 to C13 cables to connect its sockets to the user's system components, as well as a cable to connect it to the mains.

DC Block 6 is designed to improve the quality of AC electricity that powers audio and AV systems.Electrical current has a fundamental effect on the audio signal as it passes through a system, from the source and amplifiers to the speakers.The supply in a typical home is subject to interference caused by a number of problems, causing the AC waveform to be distorted before it reaches each device. This creates noise in the audio signal, which degrades the sound quality – a situation that continues to be demonstrated as more and more devices are added to the electric home's electrical network.DC power supplyA common problem is 'mains DC' – a problem known to affect the performance of audio equipment, especially amplifiers. In theory, the electrical current we receive from the outlets in our homes should be pure AC, with a perfectly symmetrical sine wave that alternates between positive and negative phases.DC voltageAC power transformers commonly used in home audio equipment cannot tolerate the presence of significant DC voltage levels without compromise. Less than 500 mV DC - typical in an average household power supply - can be enough to saturate transformers of the kind often found in amplifiers, which adversely affects sound performance and can cause audible mechanical vibration.The audiolab DC BLOCK 6 is a six-way solution to this very common problemBy blocking or canceling the DC voltage found in the AC supply, the DC BLOCK 6 corrects the DC offset and rebalances the grid sine wave. However, dealing with 'DC to mains' is not the only benefit this double-acting device offers – it also contains a high-performance audio-grade filtering circuit that removes RFI/EMI contaminants from the power supply. This is effective at reducing both differential-mode noise (exacerbated by the cheap switch-mode power supplies used by many home appliances) and common-mode noise (exacerbated by airborne interference from phones, Wi-Fi and Bluetooth networks).A specialized six-way power optimizer of such impressive efficiency, the DC 6 block is available in black or silver. It comes with a full set of power cables – six IEC C14 to C13 cables to connect its sockets to the user's system components, as well as a cable to connect it to the mains.

Audiolab DC Block Current FilterThe DC Block is designed to improve the quality of the AC power that powers our audio and AV systems.Electrical current has a fundamental influence on the audio signal as it passes through a system, from source to amplifier and then to speakers. The power supply in a typical home is subject to interference caused by a number of issues, causing the AC waveform to distort before it reaches each machine. This creates noise in the audio signal, which degrades the sound quality.This situation is getting worse as the electrical devices we use in our homes are multiplying.A common issue is 'mains DC' - a problem known to affect the performance of audio equipment, especially amplifiers. In theory, the electrical current we receive from the outlets in our homes should be pure AC, with a perfectly symmetrical sine wave alternating between positive and negative phases. However, the presence of "unbalanced loads" - countless household appliances that unevenly use the AC power available on the grid, from dimmer switches to kitchen appliances to computer power supplies - cause the waveform to be offset, resulting in the presence of a DC voltage on the AC supply.DC voltageAC transformers commonly used in home audio equipment cannot tolerate the presence of significant DC voltage levels without endangering them. Less than 500mV DC - typical in an average household power supply - can be enough to saturate toroidal transformers often found in amplifiers, which negatively affects audio performance and can cause sonic mechanical vibrations.By blocking or canceling the DC voltage present in the AC supply, the Audiolab DC Block corrects the DC offset and balances the mains sine wave. But dealing with "DC to mains" isn't the only benefit this dual power device offers, it also contains a high efficiency filtering circuit that removes RFI/EMI contaminants from the power supply. This is effective at reducing both differential operation noise (exacerbated by the cheap switching power supplies used by many home appliances) and operation noise (exacerbated by airborne interference from phones, Wi-Fi and Bluetooth networks).Simple to useUsing the DC block is simple - plug the output into the IEC socket of an audio/AV device, then plug its input into a socket (both cables supplied). The device is designed to be used for a single audio or AV device in the system. Audiolab recommends purchasing a DC Block, connecting it to the integrated amplifier or power amplifier in your system to get the most benefit. If possible, further units can be purchased for use with the rest of the system devices, preamps, sources, etc.

Audiolab DC Block Current FilterThe DC Block is designed to improve the quality of the AC power that powers our audio and AV systems.Electrical current has a fundamental influence on the audio signal as it passes through a system, from source to amplifier and then to speakers. The power supply in a typical home is subject to interference caused by a number of issues, causing the AC waveform to distort before it reaches each machine. This creates noise in the audio signal, which degrades the sound quality.This situation is getting worse as the electrical devices we use in our homes are multiplying.A common issue is 'mains DC' - a problem known to affect the performance of audio equipment, especially amplifiers. In theory, the electrical current we receive from the outlets in our homes should be pure AC, with a perfectly symmetrical sine wave alternating between positive and negative phases. However, the presence of "unbalanced loads" - countless household appliances that unevenly use the AC power available on the grid, from dimmer switches to kitchen appliances to computer power supplies - cause the waveform to be offset, resulting in the presence of a DC voltage on the AC supply.DC voltageAC transformers commonly used in home audio equipment cannot tolerate the presence of significant DC voltage levels without endangering them. Less than 500mV DC - typical in an average household power supply - can be enough to saturate toroidal transformers often found in amplifiers, which negatively affects audio performance and can cause sonic mechanical vibrations.By blocking or canceling the DC voltage present in the AC supply, the Audiolab DC Block corrects the DC offset and balances the mains sine wave. But dealing with "DC to mains" isn't the only benefit this dual power device offers, it also contains a high efficiency filtering circuit that removes RFI/EMI contaminants from the power supply. This is effective at reducing both differential operation noise (exacerbated by the cheap switching power supplies used by many home appliances) and operation noise (exacerbated by airborne interference from phones, Wi-Fi and Bluetooth networks).Simple to useUsing the DC block is simple - plug the output into the IEC socket of an audio/AV device, then plug its input into a socket (both cables supplied). The device is designed to be used for a single audio or AV device in the system. Audiolab recommends purchasing a DC Block, connecting it to the integrated amplifier or power amplifier in your system to get the most benefit. If possible, further units can be purchased for use with the rest of the system devices, preamps, sources, etc.

Network LAN filter The LAN iSilencer removes the electrical noise that distorts the audio signal from your network.It reduces the noise floor and interference.It is perfect for you if you use a wired connection and want to reduce/minimise network noise.Reduce router "noise"Loving your network streamer but getting interference via your Ethernet cable?The LAN iSilencer’s advanced tech prevents noise from interfering with the digital signal.You can connect it:To your routerTo switchesDirectly to your Ethernet wall socketGigatastic!The LAN iSilencer supports Gigabit Ethernet with no speed restrictionsIt’s shielded case with integral ground wire blocks external interference (RFI), minimises packet loss and ensures stable signal transmission.Transient Voltage Suppressor (TVS) projects your equipment against surges and voltage transients.The LAN iSilencer has a zero-jitter memory buffer and galvanically-isolated inputs to eradicate digital distortion.The LAN iSilencer boasts premium galvanic isolation technology, where electrical circuits are separated to eliminate stray currents. Audio signals can pass between galvanically isolated circuits to block differences in ground potential or currents induced by AC power.

Is your audio still taking a beating from buzz and hum? iFi’s iDefender+ is for those battling with noisy audio due to unwanted ground loops in their audio chain. Beat the buzz Is your audio still plagued by hum and buzz? Using multiple plugs within your audio chain means separate earth/ground points. These multiple earth or ground points cause a ground loop problem. This creates an unwanted chain of noise, buzz and distortion. Struggle no more. iFi’s iDefender+ provides the simple, effective solution you need. Break the loop When plugged into the source device’s USB socket, the iDefender+ detects whether there is a ground loop problem. It breaks the ground loop by ‘intelligently’ disconnecting the computer’s earth and, as well as eradicating audible ground-loop hum, it lowers the system noise floor, improving resolution and dynamic contrast. Using a USB DAC? Are you using the iDefender+ with a DAC that relies on USB power from a computer rather than power from the mains or a built-in battery? Good news. The iDefender+ offers an additional benefit. If an external power supply is plugged into the USB-C socket on its side, it blocks power from the computer and instead feeds the DAC with ‘clean’ power from the external supply. If a high-quality, low-noise power adapter such as iFi’s iPower X is used, the performance of the USB DAC will be significantly improved. New and improved. We’ve upgraded the circuitry; low-ESR tantalum capacitors have been added for improved input and output filtering.  Filtering capacitance has been increased 10-fold. The iDefender+ now comes in 3 versions and includes the newer USB-C connector. USB-A to USB-A USB-C to USB-A USB-C to USB-C Beat the buzz with the iDefender+.

Let the iPurifier3 improve your USB audio playback experience. Gremlins beware Computer audio often comes with annoying noise and jitter. The iPurifier3 is for anyone into USB audio who regularly battles with these irritating audio gremlins. Never fear, let the iPurifier3 be your system’s white knight. The white knight The third generation and slightly larger reincarnation of the iPurifier measures just 69 x 19 x 20mm in its new, dashing white armour. Both Type A and B are available. It uses iFi Active Noise Cancellation2 tech to decrease noise by 100x or -40dB in comparison to the common noise filter. REclock, REgenerate, REbalance® Our state-of-the-art REclock, REgenarate and REbalance2® technology will get your audio back on track. Put simply, it actively ‘restores’ the USB audio+power streams which eliminates jitter and ensures smooth passage for your music. REbalance® actually removes distortion caused by DC offset. Dashing. Durable. The iPurifier3 is set up for all future PCM, DSD and DXD formats. And it’s not just better looking on the outside, it’s been improved on the inside with updated components. No need to worry about upgrading for years to come. It will improve your USB audio playback experience faster than you can say King Arthur and the Round Table.

Does your USB audio system suffer from annoying background noise? Our new and improved iSilencer+ is a must if you want to enjoy vivid, open music. Enjoy the ‘new’ silence. Connecting audio gear via USB can have pros and cons. While capable of passing hi-res data at max resolution and allowing bit-perfect transfer, USB was not created specifically for audio. It carries both power and data. It is susceptible to electrical noise, for example, from the computer’s power supply. This has a negative effect on sound quality. Fear not! At iFi, we first banished these gremlins with the iSilencer3.0 and now, we’re making silence sound even better with the iSilencer+. Plug. Play. Pop free. Electrical noise on USB causes errors, data loss and poor signal integrity. You will hear these as distortion – pops, clicks and delays. The iSilencer+ solves all of this quickly and easily. It plugs directly into the USB port of your computer as a link between your computer and your DAC. It will remove electrical noise, both EMI and RFI, at source. Your music will seem clearer, warmer, and more transparent with improved bass. Double whammy. As well as plugging the iSilencer+ into the active USB port between the computer and DAC, it can also be plugged into unused USB ports too. This will further reduce radiated EMI. Each time the number of units (and therefore the number ANC II circuits) is doubled, noise reduction capability also doubles. Double whammy. Silence. Improved. The iSilencer+ uses our latest Active Noise Cancellation II® technology. It decreases noise in a similar way to noise-cancelling headphones. We use our REBalance® tech to get rid of clicks and distortion. We’ve upgraded the circuitry; low-ESR tantalum capacitors have been added for improved input and output filtering.  Filtering capacitance has been increased 10-fold. Why iSilencer+? We’ve added several flavours – it comes in 3 versions and includes the newer USB-C connector. USB-A to USB-A USB-C to USB-A USB-C to USB-C Why did we name it iSilencer+? Simply because it just gives you more – more options, improved filtering, and just more silence.

Does your USB audio system suffer from annoying background noise? Our new and improved iSilencer+ is a must if you want to enjoy vivid, open music. Enjoy the ‘new’ silence. Connecting audio gear via USB can have pros and cons. While capable of passing hi-res data at max resolution and allowing bit-perfect transfer, USB was not created specifically for audio. It carries both power and data. It is susceptible to electrical noise, for example, from the computer’s power supply. This has a negative effect on sound quality. Fear not! At iFi, we first banished these gremlins with the iSilencer3.0 and now, we’re making silence sound even better with the iSilencer+. Plug. Play. Pop free. Electrical noise on USB causes errors, data loss and poor signal integrity. You will hear these as distortion – pops, clicks and delays. The iSilencer+ solves all of this quickly and easily. It plugs directly into the USB port of your computer as a link between your computer and your DAC. It will remove electrical noise, both EMI and RFI, at source. Your music will seem clearer, warmer, and more transparent with improved bass. Double whammy. As well as plugging the iSilencer+ into the active USB port between the computer and DAC, it can also be plugged into unused USB ports too. This will further reduce radiated EMI. Each time the number of units (and therefore the number ANC II circuits) is doubled, noise reduction capability also doubles. Double whammy. Silence. Improved. The iSilencer+ uses our latest Active Noise Cancellation II® technology. It decreases noise in a similar way to noise-cancelling headphones. We use our REBalance® tech to get rid of clicks and distortion. We’ve upgraded the circuitry; low-ESR tantalum capacitors have been added for improved input and output filtering.  Filtering capacitance has been increased 10-fold. Why iSilencer+? We’ve added several flavours – it comes in 3 versions and includes the newer USB-C connector. USB-A to USB-A USB-C to USB-A USB-C to USB-C Why did we name it iSilencer+? Simply because it just gives you more – more options, improved filtering, and just more silence.

Is your audio still taking a beating from buzz and hum? iFi’s iDefender+ is for those battling with noisy audio due to unwanted ground loops in their audio chain. Beat the buzz Is your audio still plagued by hum and buzz? Using multiple plugs within your audio chain means separate earth/ground points. These multiple earth or ground points cause a ground loop problem. This creates an unwanted chain of noise, buzz and distortion. Struggle no more. iFi’s iDefender+ provides the simple, effective solution you need. Break the loop When plugged into the source device’s USB socket, the iDefender+ detects whether there is a ground loop problem. It breaks the ground loop by ‘intelligently’ disconnecting the computer’s earth and, as well as eradicating audible ground-loop hum, it lowers the system noise floor, improving resolution and dynamic contrast. Using a USB DAC? Are you using the iDefender+ with a DAC that relies on USB power from a computer rather than power from the mains or a built-in battery? Good news. The iDefender+ offers an additional benefit. If an external power supply is plugged into the USB-C socket on its side, it blocks power from the computer and instead feeds the DAC with ‘clean’ power from the external supply. If a high-quality, low-noise power adapter such as iFi’s iPower X is used, the performance of the USB DAC will be significantly improved. New and improved. We’ve upgraded the circuitry; low-ESR tantalum capacitors have been added for improved input and output filtering.  Filtering capacitance has been increased 10-fold. The iDefender+ now comes in 3 versions and includes the newer USB-C connector. USB-A to USB-A USB-C to USB-A USB-C to USB-C Beat the buzz with the iDefender+.

Quiet as a battery. None of the hassle.

Is your audio still taking a beating from buzz and hum? iFi’s iDefender+ is for those battling with noisy audio due to unwanted ground loops in their audio chain. Beat the buzz Is your audio still plagued by hum and buzz? Using multiple plugs within your audio chain means separate earth/ground points. These multiple earth or ground points cause a ground loop problem. This creates an unwanted chain of noise, buzz and distortion. Struggle no more. iFi’s iDefender+ provides the simple, effective solution you need. Break the loop When plugged into the source device’s USB socket, the iDefender+ detects whether there is a ground loop problem. It breaks the ground loop by ‘intelligently’ disconnecting the computer’s earth and, as well as eradicating audible ground-loop hum, it lowers the system noise floor, improving resolution and dynamic contrast. Using a USB DAC? Are you using the iDefender+ with a DAC that relies on USB power from a computer rather than power from the mains or a built-in battery? Good news. The iDefender+ offers an additional benefit. If an external power supply is plugged into the USB-C socket on its side, it blocks power from the computer and instead feeds the DAC with ‘clean’ power from the external supply. If a high-quality, low-noise power adapter such as iFi’s iPower X is used, the performance of the USB DAC will be significantly improved. New and improved. We’ve upgraded the circuitry; low-ESR tantalum capacitors have been added for improved input and output filtering.  Filtering capacitance has been increased 10-fold. The iDefender+ now comes in 3 versions and includes the newer USB-C connector. USB-A to USB-A USB-C to USB-A USB-C to USB-C Beat the buzz with the iDefender+.

GND control. Take out speaker hum. Ground control to Major components. The optimum configuration for each system is one Ground/Earth for the whole system. If a system has multiple Grounds/Earths, then it often creates unwanted ground loops. These systems will then have an annoying low-frequency hum (emitted from the speakers). Current solutions either jeopardise (i) both safety and EMI shielding (e.g. cheater plug), or (ii) EMI shielding. And most are single country (US) uses only. The GND Defender in the correct way, intelligently detects a ground loop and will cut the ground for that component. AI ground detection. With a GND Defender at the IEC power input, it will intelligently detect and remove the ground loop at the component. Behind this, the GND Defender: Intelligently breaks DC ground loops to eliminate ground loop hum EMI shielding is retained Equipment Safety is unaffected (not a ground lift – so maintains equipment safety ground) If multiple ground loops exist, more than one GND Defender may be required. The GND Defender is smarter than the average ground lift. By a long way. Battleship build. The GND Defender is not only at the cutting-edge in terms of technology but also safety: High-performance glass passivated semiconductor High Case Dielectric Strength of 1500VRMS UL Listed X7R Capacitor High-temperature stability Flame resistant IEC socket/connector/chassis Fireproof polymers UL94-V0 Remember that best practice is to always keep at least one direct power cable connection.

The amplifier is the heart of your system. If you have a mechanical hum, deploy the DC Blocker. Got big amplifier. Bye bye mechanical hum. Many large amplifiers have a really annoying mechanical hum (emitted from the toroidal transformer itself). You can hear it when you place your ear close or next to the chassis. This is caused by a small amount of DC voltage in the mains which makes its way through to the mains transformer, it will become ‘saturated’ and start to hum like a trooper. The DC Blocker is a clever device that you place at the IEC (at the rear power inlet) and as its name implies, it stops DC from getting into the amplifier. It therefore eliminates amplifier transformer hum. Cute. Clever. All the benefits of cutting out annoying hum with no drawbacks. Intelligently stops any DC voltage from the mains to eliminate transformer hum EMI shielding is retained Equipment safety is unaffected Behind every good component is a DC Blocker. The bigger the amplifier, usually, the larger the toroidal which is susceptible to residual DC voltage. JUst add the DC Blocker at the IEC to stop DC from getting in. 90-240V Maximum rating >10A, continuous current rating 7A Small size, universal application, won’t block any other connectors, sockets, or cables

AudioQuest is proud to introduce our Niagara 7000 Low-Z Power Noise-Dissipation System, a complete rethinking of AC power filtration, designed by one of the field’s foremost experts, Garth Powell. As with every AQ product before, and more recently our DragonFly USB DAC and NightHawk headphones, we would not have entered this field if we didn’t think we had something special and significant to offer. In Niagara 7000, we believe we’ve created a product that revolutionizes the art and science of AC power—a product that will inspire audio/video enthusiasts and help to create an even more immersive, emotionally compelling experience. In designing Niagara 7000, we aimed to successfully address problems that prevent today’s audio/video components from achieving their potential. Due to the great increase in airborne and AC-line-transmitted radio signals, combined with overtaxed utility lines and the ever-increasing demands from high-definition audio/video components, a complete rethinking of AC power technology is needed to provide our A/V systems with the power required to fulfill their potential. Further, today’s power amplifiers are being taxed for instantaneous peak-current demand, even when they’re driven at modest volumes. Although we have seen a substantial increase in dynamic range from much of our audio software, the loudspeakers we employ to reproduce them are often no more efficient than they were 50 years ago. This places great demands on an amplifier’s power supply, as well as the source AC power supplying it. In our efforts to properly accommodate the promise of today’s ever-increasing bandwidth and dynamic range, the Niagara 7000 affords extremely low system noise and provides superior current delivery across a very wide range of frequencies. Through differential sample tests and spectrum analysis, it can be proven that up to a third of a high-resolution (low-level) audio signal can be lost, masked, or highly distorted by the vast levels of noise riding along the AC power lines that feed our components. This noise couples with the signal circuitry as current noise and through AC ground, permanently distorting and/or masking the source signal. Our systems’ sensitive components need better alternating current. We realize that true audio/video optimization is never a matter of any one secret or exotic circuit. When it comes to noise dissipation for AC power, many approaches can yield meaningful results. However, these approaches may also impart ringing, current compression, and non-linear distortions that can render the cure worse than the disease. While there currently exist a number of AC power conditioners, isolation transformers, regeneration amplifiers, and battery back-up system topologies, Niagara 7000 takes a holistic, science-based approach to AC power technology and represents a comprehensive solution to the ever-increasing noise that plagues our power lines. In the Niagara 7000, you’ll find optimized radio-frequency lead directionality, run-in capacitor forming technologies developed by Jet Propulsion Laboratories and NASA, and AC inlet and outlet contacts with heavy silver plating over extreme-purity copper assuring the tightest grip possible. The Niagara 7000 uses our patented AC Ground Noise-Dissipation System, the world’s first Dielectric-Biased AC Isolation Transformers, and the widest bandwidth-linearized noise-dissipation circuit in the industry. Our unique passive/active Transient Power Correction Circuit features an instantaneous current reservoir of over 90 amps peak, specifically designed for today’s current-starved power amplifiers. Most AC power products featuring “high-current outlets” merely minimize current compression; the Niagara 7000 corrects it. With an AudioQuest Niagara 7000, music lovers can finally experience the clarity, dimensionality, frequency extension, dynamic contrast, and grip their A/V systems have been capable of delivering—if only the power had been right! Technical Specifications: Patented Dielectric-Biased Symmetrical Power Isolation Transformers: 2 for source component outlet banks Transient Power Correction: 90 amps peak. Provides a current reservoir for any power amplifier (up to 25mS) Level-X Ultra-Linear Noise-Dissipation Technology: More than 23 octaves differential-mode filtering (3kHz–1GHz in excess of 24dB reduction) and 20 octaves common-mode filtering (60Hz–100MHz in excess of 30dB reduction) with linear response, optimized for varying line and load impedance Patented Ground Noise-Dissipation System (All outlets): 6 banks of direction-controlled ground noise-dissipation Non-Sacrificial Surge Protection: Withstands multiple AC surges and spikes up to 6000V/3000A without sustaining damage–sonically non-invasive Maximum RMS Input Current: 20 Amps (RMS) Maximum RMS Current per Source Component Output Bank: 5 Amps (RMS) Outlets: Source (8); High-Current (4) Dimensions: 17.5" W x 5.24" H x 17.2" D (3-RU Rack Mount Kits Optional) Weight: 86 lbs.

The science of AC power delivery is not a simple one; it demands focus, and the devil is in the details. In fact, the great increase in airborne and AC-line-transmitted radio signals, combined with overtaxed utility lines and the ever-increasing demands from high-definition audio/video components, has rendered our utilities’ AC power a somewhat antiquated technology. Where Alternating Current (AC) is concerned, we’re relying on a century-old technology created for incandescent lights and electric motors—technology that was certainly never meant to power the sophisticated analog and digital circuits used in today’s premium audio/video systems. To properly accom-modate the promise of today’s ever-increasing bandwidth and dynamic range, we must achieve extraordinarily low noise across a very wide range of frequencies. Further, today’s power amplifiers are being taxed for instantaneous peak-current demand, even when they’re driven at modest volumes. Although we have seen a substantial increase in dynamics from much of our audio software, the loudspeakers we employ to reproduce them are often no more efficient than they were two to four decades ago. This places great demands on an amplifier’s power supply, as well as the source AC power supplying it. Our systems’ sensitive components need better alternating current—a fact that has resulted in a host of AC power conditioning, isolation transformer, regeneration amplifier, and battery back-up system topologies. Through differential sample tests and spectrum analysis, it can be proven that up to a third of a high-resolution (low-level) audio signal can be lost, masked, or highly distorted by the vast levels of noise riding along the AC power lines that feed our components. This noise couples into the signal circuitry as current noise and through AC ground, permanently distorting and/or masking the source signal. Given that the stakes are so high, all sincere attempts to solve this problem must be applauded. Once the audio/video signal is gone, it’s gone forever… For AudioQuest, honoring the source is never a matter of simply using premium “audiophile-grade parts” or relying on a proprietary technology—common approaches within our community. For years, we have all been witness to the same, seemingly endless audiophile debates: valves versus transistors; analog versus digital; can cables really make a difference?; and on and on. While we, too, can brag about our many unique technologies, we realize that true audio/video optimization is never a matter of any one secret or exotic circuit. When it comes to noise filtering for AC power, many approaches can yield meaningful results. However, these approaches may also impart ringing, current compression, and non-linear distortions that can render the cure worse than the disease! The Niagara 5000 features our patented AC Ground Noise- Dissipation System, the widest bandwidth-linearized AC filter in the industry, and our unique passive/active Transient Power Correction Circuit. Boasting an instantaneous current reservoir of over 90 amps peak, the Niagara 5000 is specifically designed for today’s current-starved power amplifiers. Many AC power products featuring “high-current outlets” merely minimize current compression; the Niagara 5000 corrects it. Though it’s easy to tout a given technology, it’s quite another thing to create a solution that is consistent, holistic, functional, and that honors verifiable science. It’s not enough to reduce AC line noise and its associated distortions at just one octave, thus leaving vulnerable the adjacent octaves and octave partials to noise, resonant peaking, or insufficient noise reduction. Consistency is key. We should never accept superior resolution in one octave, only to suffer from masking effects a half-octave away and ringing artifacts two octaves from there. This is the principal criterion for AudioQuest’s Low-Z Power Noise-Dissipation System. The Niagara 5000 represents over 20 years of exhaustive research and proven AC power products designed for audiophiles, broadcast engineers, and professional-audio applications. Every conceivable detail has been addressed: In the Niagara 5000, you’ll find optimized radio-frequency lead directionality, capacitor run-in forming technologies developed by Jet Propulsion Laboratories and NASA, and AC inlet and outlet contacts with heavy silver plating over extreme-purity copper, assuring the tightest grip possible. A great system is built from a solid foundation, and that foundation starts with power. With an AudioQuest Niagara 5000, you’ll experience for the first time the clarity, dimensionality, frequency extension, dynamic contrast, and grip your system has always been capable of delivering—if only the power had been right! We welcome you to experience the Niagara 5000 and hear firsthand the remarkable results of highly optimized power management: startlingly deep silences, stunning dynamic freedom, outstanding retrieval of ambience cues, and gorgeous delineation of instruments and musicians in space. Once you’ve experienced it, it may seem so elegant, so logical, and so obvious that you find yourself wondering why it hadn’t been done before. Technical Specifications: Transient Power Correction: 90 amps peak. Provides a current reservoir for any power amplifier (up to 25mS) Level-X Ultra-Linear Noise-Dissipation Technology: More than 23 octaves differential-mode filtering (3kHz–1GHz in excess of 24dB reduction) and 16 octaves common-mode filtering (20kHz–100MHz in excess of 30dB reduction) with linear response, optimized for varying line and load impedance Patented Ground Noise-Dissipation System. (All outlets): 6 banks of direction-controlled ground noise-dissipation Non-Sacrificial Surge Protection: Withstands multiple AC surges and spikes up to 6000V/3000A without sustaining damage—sonically non-invasive Maximum RMS Input Current: 20 Amps (RMS) Outlets: Source (8); High-Current (4) Dimensions: 17.5" W x 5.24" H x 17.2" D (3-RU Rack Mount Kits Optional) Weight: 38 lbs.

The science of AC power delivery is not a simple one; it demands focus, and the devil is in the details. In fact, the great increase in airborne and AC-line-transmitted radio signals, combined with overtaxed utility lines and the ever-increasing demands from high-definition audio/video components, has rendered our utilities’ AC power a somewhat antiquated technology. Where Alternating Current (AC) is concerned, we’re relying on a century-old technology created for incandescent lights and electric motors—technology that was certainly never meant to power the sophisticated analog and digital circuits used in today’s premium audio/video systems. To properly accommodate the promise of today’s ever-increasing bandwidth and dynamic range, we must achieve extraordinarily low noise across a very wide range of frequencies. Further, today’s power amplifiers are being taxed for instantaneous peak-current demand, even when they’re driven at modest volumes. Although we have seen a substantial increase in dynamics from much of our audio software, the loudspeakers we employ to reproduce them are often no more efficient than they were two to four decades ago. This places great demands on an amplifier’s power supply, as well as the source AC power supplying it. Our systems’ sensitive components need better alternating current—a fact that has resulted in a host of AC power conditioning, isolation transformer, regeneration amplifier, and battery back-up system topologies. Through differential sample tests and spectrum analysis, it can be proven that up to a third of a high-resolution (low-level) audio signal can be lost, masked, or highly distorted by the vast levels of noise riding along the AC power lines that feed our components. This noise couples into the signal circuitry as current noise and through AC ground, permanently distorting and/or masking the source signal. Given that the stakes are so high, all sincere attempts to solve this problem must be applauded. Once the audio/video signal is gone, it’s gone forever… For AudioQuest, honoring the source is never a matter of simply using premium “audiophile-grade parts” or relying on a proprietary technology—common approaches within our community. For years, we have all been witness to the same, seemingly endless audiophile debates: valves versus transistors; analog versus digital; can cables really make a difference?; and on and on. While we, too, can brag about our many unique technologies, we realize that true audio/video optimization is never a matter of any one secret or exotic circuit. When it comes to noise filtering for AC power, many approaches can yield meaningful results. However, these approaches may also impart ringing, current compression, and non-linear distortions that can render the cure worse than the disease! The Niagara 3000 features our patented AC Ground Noise- Dissipation System, the widest bandwidth-linearized AC filter in the industry, and our unique passive/active Transient Power Correction Circuit. Boasting an instantaneous current reservoir of over 55 amps peak, the Niagara 3000 is specifically designed for today’s current-starved power amplifiers. Many AC power products featuring “high-current outlets” merely minimize current compression; the Niagara 3000 corrects it. Though it’s easy to tout a given technology, it’s quite another thing to create a solution that is consistent, holistic, functional, and that honors verifiable science. It’s not enough to reduce AC line noise and its associated distortions at just one octave, thus leaving vulnerable the adjacent octaves and octave partials to noise, resonant peaking, or insufficient noise reduction. Consistency is key. We should never accept superior resolution in one octave, only to suffer from masking effects a half-octave away and ringing artifacts two octaves from there. This is the principal criterion for AudioQuest’s Low-Z Power Noise-Dissipation System. The Niagara 3000 represents over 20 years of exhaustive research and proven AC power products designed for audiophiles, broadcast engineers, and professional-audio applications. Every conceivable detail has been addressed: In the Niagara 3000, you’ll find optimized radio-frequency lead directionality, capacitor run-in forming technologies developed by Jet Propulsion Laboratories and NASA, and AC inlet and outlet contacts with heavy silver plating over extreme-purity copper, assuring the tightest grip possible. A great system is built from a solid foundation, and that foundation starts with power. With an AudioQuest Niagara 3000, you’ll experience for the first time the clarity, dimensionality, frequency extension, dynamic contrast, and grip your system has always been capable of delivering—if only the power had been right! We welcome you to experience the Niagara 3000 and hear firsthand the remarkable results of highly optimized power management: startlingly deep silences, stunning dynamic freedom, outstanding retrieval of ambience cues, and gorgeous delineation of instruments and musicians in space. Once you’ve experienced it, it may seem so elegant, so logical, and so obvious that you find yourself wondering why it hadn’t been done before. SPECIFICATIONS Transient Power Correction: 55 amps peak. Provides a current reservoir for any power amplifier (up to 25mS) Level-X Linear Noise-Dissipation Technology: More than 21 octaves differential-mode filtering (10kHz–1GHz in excess of 24dB reduction) with linear response, optimized for varying line and load impedance Patented Ground Noise-Dissipation System (All outlets): 3 banks of direction-controlled ground noise-dissipation Input Current Maximum Capacity: 20 amps RMS (total). Non-Sacrificial Surge Protection: Withstands multiple AC surges and spikes up to 6000V/3000A without sustaining damage—sonically non-invasive Maximum RMS Input Current: 15 Amps (RMS) Outlets: Source (5); High-Current (2) Dimensions: 17.5" W x 3.45" H x 15.2" D (2-RU Rack Mount Kit included) Weight: 25 lbs.

Niagara 1200 brings the benefits of highly optimized power management to far more music lovers and replaces the amazingly well-received Niagara 1000. The most obvious difference between the Niagaras 1000 and 1200, other than the 1200’s gorgeous textured bright finish, are the more universally useful shape and surprisingly substantial weight. The 1200 can now sit on a shelf like a component, with all the in and out cables in the back. It can be used ‘face’ down with the outlets in the air, fitting much better in the space between furniture and the wall. And, the 1200 is designed to stand on one end. 100% of the performance in a more useful package – and still only $999.95 Designed by Garth Powell, the Niagara 1200 embodies the very same design philosophy and incorporates the same patented technology found in its larger siblings, the Niagara 5000 and Niagara 7000, but packs it into a smaller, sleeker enclosure—at a fraction of the price. Much like the Niagara 5000 and 7000, the Niagara 1200 uses ultra-low resistance solid-core wiring optimized for low-noise directionality, capacitor forming technologies that vastly improve linearity and minimize distortion, and low-impedance AC inlet and outlet contacts with heavy silver plating over high-purity Beryllium Copper for superior noise dissipation. Similarly, Niagara 1200 features our non-sacrificial surge protection, patented Ground Noise-Dissipation technology, and over-voltage shutdown. The Niagara 1200’s non-sacrificial protection circuits ensure that your system is thoroughly protected from AC surges and spikes, and the Niagara 1200 protects itself—no damage, no down time. Set it and forget it. The Niagara 1200 employs AudioQuest’s patented Ground-Noise Dissipation System and Linear Noise-Dissipation Technology and fits seven high-performance outlets into its sleek cabinet-friendly chassis. Input current maximum capacity is 15 amps RMS in the 1200. Technical Specifications: Level-X Linear Noise-Dissipation Technology: More than 19 octaves of AC differential filtering (20kHz–1Ghz in excess of 24dB) with linear response, optimized for varying line and load impedance Patented Ground Noise-Dissipation System (All outlets): 2 banks of direction-controlled ground noise-dissipation Non-Sacrificial Surge Protection: Withstands multiple AC surges and spikes up to 6000V/3000A without sustaining damage—sonically non-invasive Maximum RMS Input Current: 15 Amps (RMS) Outlets: Source (5); High-Current (2) Dimensions: 19.4" W x 3.2 H" x 7.5" D Weight: 18 lbs.

Torus Power’s “TOT” Series consists of three compact models that bring toroidal power conditioning to a new price point. Compact in size, affordable for most applications and packed with features, the TOT Series is an easy choice to improve performance of all audio and video systems.The TOT Max, rated at 15 Amps, can provide current to demanding power hungry systems including substantial power amplifiers.All TOT models feature a courtesy USB charger outlet. Options include a dress aluminum faceplate (Black or Silver) and a 19” rack mount adapter kit. TOT units include circuit protection through a replaceable varistor. Torus Power non-sacrificial Series Mode Surge Suppression (SMSS) is also available as a factory-installed option.  CONFIGURATION STAND ALONE 19″ RACK MOUNT (RK) CHASSIS 2U INPUT VOLTAGE 120V OUTPUT VOLTAGE 120V INPUT CIRCUIT BREAKER 1 X 15A FUSE OUTPUT CURRENT 15 A POWER RATING 1725VA FREQUENCY 60Hz NO. OUTLETS 8 INLET TYPE IEC 15A OUTLET TYPE 4 DUPLEX 5-15R WEIGHT KG 17.7 KG 18.1 KG WEIGHT LBS 38.9 LBS 39.8 LBS DIMENSIONS W X H X D MM  318 X 101 X 369 480 X 88 X 373 DIMENSIONS W X H X D IN 12.5 X 4.0 X 14.5 18.9 X 3.4 X 14.7 Each model is available with SMSS (Series Mode Surge Suppression) factory installed as an option

Torus Power’s “TOT” Series consists of three compact models that bring toroidal power conditioning to a new price point. Compact in size, affordable for most applications and packed with features, the TOT Series is an easy choice to improve performance of all audio and video systems. The TOT Mini, rated at 7 Amps, is ideal to provide clean power to Audio/Video systems, projectors, flat panels, powered speakers, media/ source players, processors, or network devices. SPECIFICATIONS CONFIGURATION SHELF MODEL 19″ RACK MOUNT (RK) CHASSIS 2U INPUT VOLTAGE 120V OUTPUT VOLTAGE 120V INPUT CIRCUIT BREAKER 1 X 8A FUSE OUTPUT CURRENT 7A POWER RATING 805VA FREQUENCY 60Hz NO. OUTLETS 6 INLET TYPE IEC 15A OUTLET TYPE 3 DUPLEX 5-15R WEIGHT KG 11.6 12 WEIGHT LBS 25.5 26.4 DIMENSIONS W X H X D MM 318 X 101 X 268 480 X 88 X 271 DIMENSIONS W X H X D IN 12.5 X 4.0 X 10.5 18.9 X 3.4 X 10.7 Each model is available with SMSS (Series Mode Surge Suppression) factory installed as an option.

Furman M-10X E Install an M-10x E in to the top slot of your rack, and the ten switched outlets in the rear panel will power up and protect all your equipment up to a 10-amp load. A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system.ApplicationsINSTRUMENT RIGSYou've got a rack for your effects, preamps, tuner...You're going to plug that into the wall? One big spike and your rig is up in smoke. Furman's standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's standard level RFI/EMI filtration, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp. Plus, dual pull-out lamps (M-10Lx E) let you see your rack without turning the house lights on.RECORDINGCan't track down where that noise is coming from? Your mix sounding flat? With Furman's standard level RFI/EMI filtration you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 10A capacity and eleven total outlets, it's enough to power your whole home studio.DJ EQUIPMENTBars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's standard level protection and filtration keeps the bad stuff out.PRO AUDIOWhen you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.

The Classic Series from Furman brings together superior protection and outstanding performance in a sturdy, rack-mountable design. The Classic Series features Furman’s revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS). Together, these technologies comprise what is, without question, one of the world's most advanced and comprehensive transient voltage surge supressors.Instrument RigsYou've got a rack for your effects, preamps, tuner...You're going to plug that into the wall? One big spike and your rig is up in smoke. Furman's advanced Series Multi-Stage Protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's advanced Linear Filtering Technology, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.RecordingCan't track down where that noise is coming from? Your mix sounding flat? With Furman's advanced Linear Filtering Technology you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's advanced advanced Series Multi-Stage Protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and eleven total outlets, it's enough to power your whole home studio.DJ EquipmentBars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's advanced Series Multi-Stage Protection and LiFT keeps the bad stuff out and the dual pull-out front panel lights let you discreetly see your board and gear without distracting from the show on the dance floor.Pro AudioWhen you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's advanced Linear Filtering Technology. It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.Features:Type: Balanced armatureFrequency Response: 20 – 18,000 HzSensitivity: 107 dB/mWImpedance: 44 ohmsWeight: 9 g (0.3 oz), without cableCable: Detachable 1.6 m (5.2') with A2DC connectorsConnector: 3.5 mm (1/8") gold-plated stereo mini-plug, L-shapedAccessories Included: Carrying case, silicone eartips (XS/S/M/L), 6.3 mm (1/4") adapter 

The 6 Amp P-1400 AR E delivers a stable 230 volts of AC power to protect equipment from problems caused by AC line voltage irregularities such as sags, brownouts, or overvoltages - all of which can cause sensitive electronic equipment to malfunction or sustain damage.The P-1400 AR E accepts any input voltage from 188V to 270V and transforms it to a constant output of 230V or 240V (switchable), ±10V. Voltages beyond that range may also be converted to usable levels, depending on the range variance.Additionally, the P-1400 AR E is a full-featured power conditioner that filters and purifies AC power, reducing line noise and ensuring optimum performance. Not only will your equipment perform better with Furman’s Linear Filtering Technology (LiFT), but it will also be fully protected by our exclusive Series Multi-Stage Protection (SMP), and Extreme Voltage Shutdown (EVS). This circuitry provides the highest level of power protection available.Features:Surge ProtectionFurman’s exclusive SMP technology provides the highest level of surge & spike protection available.LiFT offers AC power filtering to ensure clean power for unequaled audio & video clarity.nAdvanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.LED status indicators warn you when voltage is outside of nominal range or when protection has been compromised.True RMS Voltage Regulation delivers a stable 120 volts of AC power to protect equipment from problems caused by AC lne voltage irregularities.Front panel USB convenience outlets allows you to charge most media devices or power a USB lamp.Large digital voltmeter / ammeter, with discrete dimmer button, displays line votlage and true RMS current draw.Isolated outlet banks minimize inter-component interference and noise contamination.6 Amp rating featuring a high inrush magnetic circuit breaker for added protection.11 total outlets (10 rear panel outlets and one front panel convenience outlet).Rear panel BNC connector powers any standard gooseneck lamp for rear rack illumination. 

The Classic Series From Furman Brings Together Superior Protection And Outstanding Performance In A Sturdy, Rack-mountable Design. The Classic Series Features Furman’s Revolutionary Series Multi-stage Protection (Smp), Linear Filtering Technology (Lift), And Extreme Voltage Shutdown (Evs). Together, These Technologies Comprise What Is, Without Question, One Of The World's Most Advanced And Comprehensive Transient Voltage Surge Supressors.Instrument RigsYou've Got A Rack For Your Effects, Preamps, Tuner...you're Going To Plug That Into The Wall? One Big Spike And Your Rig Is Up In Smoke. Furman's Advanced Series Multi-stage Protection Defends Your Gear From The Spikes And Surges That Are So Common At Gigs And Practice Spots. With Furman's Advanced Linear Filtering Technology, You'll Get A Quieter Tone Without Pops, Crackles, And The Local Radio Station Coming Out Of Your Amp.RecordingCan't Track Down Where That Noise Is Coming From? Your Mix Sounding Flat? With Furman's Advanced Linear Filtering Technology You'll Lower The Noise Floor Caused By The Dirty Ac Power Coming Into Your Console Or Daw. Furman's Advanced Advanced Series Multi-stage Protection Keeps Your Sensitive Digital Equipment From Acting Funny Or Burning Up Due To Everyday Spikes And Surges. With A 15a Capacity And Eleven Total Outlets, It's Enough To Power Your Whole Home Studio.Dj EquipmentBars, Clubs And Other Event Venues Have Some Of The Worst Power Out There - From Air Compressors Turning On And Off To Light Shows Pulling Current Loads Up And Down, The Ac Power Can Be A Strain On The Circuits In Your Rig. Furman's Advanced Series Multi-stage Protection And Lift Keeps The Bad Stuff Out And The Dual Pull-out Front Panel Lights Let You Discreetly See Your Board And Gear Without Distracting From The Show On The Dance Floor.Pro AudioWhen You're Out There Gigging, You Never Know What Kind Of Power You're Going To Get. The Wear And Tear On Mobile Rigs Eventually Takes It Toll - That's Why It's Smart To Plug Into Furman's Advanced Linear Filtering Technology. It Keeps Your Equipment Safe And Sounding Clean. Whether You're Setting Up A Show At The Local Club Or Powering Up The Church Band For Their Next Service, Make Sure You Give Them Power They Can Trust.Features:Furman's exclusive SMP technology provides the highest level of surge & spike protection available.LiFT offers AC power filtering to ensure clean power for unequaled audio & video clarity.Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.Dual smooth track retractable LED lights illuminate equipment in your rack.LED status indicators warn you when voltage is outside of nominal range or when protection has been compromised.Front panel convenience charger allows you to charge most media devices or power a USB lamp.Large digital voltmeter / ammeter, with discrete dimmer button, displays line votlage and true RMS current draw.Isolated outlet banks minimize inter-component interference and noise contamination.16 Amp rating featuring a high inrush magnetic circuit breaker for added protection.11 total outlets (10 rear panel outlets and one front panel convenience outlet).Rear panel BNC connector powers any standard gooseneck lamp for rear rack illumination. 

10 Amp compact power conditioner with auto-resetting voltage protection. Export. The AC-210AE compact power conditioner features Furman’s revolutionary SMP technology. Furman’s Series Multi-Stage Protection (SMP) circuit features our exclusive Linear Filter Technology (LiFT) and Extreme Voltage Shutdown (EVS). Together, these technologies comprise what is, without question, the world’s most advanced and comprehensive transient voltage surge suppressor.SMP (Series Multi-Stage Protection Plus)Furman’s SMP surge suppression virtually eliminates service calls. Traditional surge suppression circuits sacrifice themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so with SMP. With Furman’s SMP, damaging transient voltages are safely absorbed, clamped and dissipated - no sacrificed parts, no service calls, no down time.Unique to Furman’s SMP is its unparalleled clamping voltage, even when tested beyond the grueling specifications of - USA/CIDA’s A-1-1 test. While other designs offer clamping voltages that are well above 300VAC peak (far beyond long accepted professional standards), Furman’s SMP clamps at 376VAC peak, 275 VAC RMS even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furman’s SMP technology.LiFT (Linear Filtering Technology)Unfortunately, traditional AC filter/conditioners have been designed for unrealistic laboratory conditions. Prior technologies could actually harm audio and video performance more than they help, due to the resonant peaking of their antiquated, non-linear designs. Under certain conditions, these designs can actually add more than 10 dB of noise to the incoming AC line! Worse still, lost digital data, the need to reboot digital presets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground. Furman’s SMP with LiFT takes another approach, ensuring optimal performance through linear filtering and no leakage to ground.E.V.S. (Extreme Voltage Shutdown)Furman’s trusted overvoltage circuitry protects against all too frequent accidental connections to extreme voltage by shutting off the incoming power until the overvoltage condition is corrected.Compact Chassis DesignAt only 1.75'H x 5'W x 8.5'D, and weighing in at only 3 lbs., the AC-210 A E's compact, low-profile design makes it ideal for mounting to the back of a flat-screen television, or anywhere that discretely located, remote power protection and purification are needed.Features:Furman's exclusive SMP Technology provides the highest level of surge & spike protection availableLiFT offers linear AC power filtering to ensure clean power for unequaled audio & video clarityAuto-Reset EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditionsLED indicators provide information on power quality and operational status of unit10 amp rating featuring circuit breaker for added protectionZero ground contamination circuitry protects critical video circuitsCompact chassis design easily attaches to any flat screen television mount or any other remote location

Install An M-10lx E In To The Top Slot Of Your Rack, And The Ten Switched Outlets In The Rear Panel Will Power Up And Protect All Your Equipment Up To A 10-amp Load. Illuminate Your Rack With Two Retractable, Front Panel Lights.A Merit Series Power Conditioner Is The Perfect Low-cost Ac Power Solution For Any Rack Mount System. The M-10lx E Features Two Slide Out, Swiveling Light Fixtures To Provide Discreet Illumination Of Your Equipment On Stages, In Studios, And In Other Dark Places. A Dimmer Knob Lets You Adjust The Lamp Brightness To Just The Right Level.Instrument RigsYou've Got A Rack For Your Effects, Preamps, Tuner...you're Going To Plug That Into The Wall? One Big Spike And Your Rig Is Up In Smoke. Furman's Standard Level Surge/spike Protection Defends Your Gear From The Spikes And Surges That Are So Common At Gigs And Practice Spots. With Furman's Standard Level Rfi/emi Filtration, You'll Get A Quieter Tone Without Pops, Crackles, And The Local Radio Station Coming Out Of Your Amp. Plus, Dual Pull-out Lamps Let You See Your Rack Without Turning The House Lights On.RecordingCan't Track Down Where That Noise Is Coming From? Your Mix Sounding Flat? With Furman's Standard Level Rfi/emi Filtration You'll Lower The Noise Floor Caused By The Dirty Ac Power Coming Into Your Console Or Daw. Furman's Standard Level Surge And Spike Protection Keeps Your Sensitive Digital Equipment From Acting Funny Or Burning Up Due To Everyday Spikes And Surges. With A 10a Capacity And Eleven Total Outlets, It's Enough To Power Your Whole Home Studio.Dj EquipmentBars, Clubs And Other Event Venues Have Some Of The Worst Power Out There - From Air Compressors Turning On And Off To Light Shows Pulling Current Loads Up And Down, The Ac Power Can Be A Strain On The Circuits In Your Rig. Furman's Standard Level Protection And Filtration Keeps The Bad Stuff Out And The Dual Pull-out Front Panel Lights Let You Discreetly See Your Board And Gear Without Distracting From The Show On The Dance Floor.Pro AudioWhen You're Out There Gigging, You Never Know What Kind Of Power You're Going To Get. The Wear And Tear On Mobile Rigs Eventually Takes It Toll - That's Why It's Smart To Plug Into Furman's Standard Level Protection And Rfi/emi Filtration. It Keeps Your Equipment Safe And Sounding Clean. Whether You're Setting Up A Show At The Local Club Or Powering Up The Church Band For Their Next Service, Make Sure You Give Them Power They Can TrustFeatures:AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)Spike & surge protection ensures equipment stays safe and your power stays clean10 rear panel outlets and 1 front panel convenience outlet10 amp rating, with circuit breakerFront panel indicator LED lets you know that your equipment is being protectedTwo retractable LED light fixtures with dimmer control for convenient rack illumination

The Classic Series From Furman Brings Together Superior Protection And Outstanding Performance In A Sturdy, Rack-mountable Design. The Classic Series Features Furman’s Revolutionary Series Multi-stage Protection (Smp), Linear Filtering Technology (Lift), And Extreme Voltage Shutdown (Evs). Together, These Technologies Comprise What Is, Without Question, One Of The World's Most Advanced And Comprehensive Transient Voltage Surge Supressors.Instrument RigsYou've Got A Rack For Your Effects, Preamps, Tuner...you're Going To Plug That Into The Wall? One Big Spike And Your Rig Is Up In Smoke. Furman's Advanced Series Multi-stage Protection Defends Your Gear From The Spikes And Surges That Are So Common At Gigs And Practice Spots. With Furman's Advanced Linear Filtering Technology, You'll Get A Quieter Tone Without Pops, Crackles, And The Local Radio Station Coming Out Of Your Amp.RecordingCan't Track Down Where That Noise Is Coming From? Your Mix Sounding Flat? With Furman's Advanced Linear Filtering Technology You'll Lower The Noise Floor Caused By The Dirty Ac Power Coming Into Your Console Or Daw. Furman's Advanced Advanced Series Multi-stage Protection Keeps Your Sensitive Digital Equipment From Acting Funny Or Burning Up Due To Everyday Spikes And Surges. With A 15a Capacity And Eleven Total Outlets, It's Enough To Power Your Whole Home Studio.Dj EquipmentBars, Clubs And Other Event Venues Have Some Of The Worst Power Out There - From Air Compressors Turning On And Off To Light Shows Pulling Current Loads Up And Down, The Ac Power Can Be A Strain On The Circuits In Your Rig. Furman's Advanced Series Multi-stage Protection And Lift Keeps The Bad Stuff Out And The Dual Pull-out Front Panel Lights Let You Discreetly See Your Board And Gear Without Distracting From The Show On The Dance Floor.Pro AudioWhen You're Out There Gigging, You Never Know What Kind Of Power You're Going To Get. The Wear And Tear On Mobile Rigs Eventually Takes It Toll - That's Why It's Smart To Plug Into Furman's Advanced Linear Filtering Technology. It Keeps Your Equipment Safe And Sounding Clean. Whether You're Setting Up A Show At The Local Club Or Powering Up The Church Band For Their Next Service, Make Sure You Give Them Power They Can Trust..Features:Furman's exclusive SMP technology provides the highest level of surge & spike protection available.LiFT offers AC power filtering to ensure clean power for unequaled audio & video clarity.Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.Dual smooth track retractable LED lights illuminate equipment in your rack.LED status indicators warn you when voltage is outside of nominal range or when protection has been compromised.Isolated outlet banks minimize inter-component interference and noise contamination.10 Amp rating featuring a high inrush magnetic circuit breaker for added protection.11 total outlets (10 rear panel outlets and one front panel convenience outlet).Rear panel BNC connector powers any standard gooseneck lamp for rear rack illumination.

The most widely recognized and trusted name in AC power conditioning is proud to introduce the PS-8RE III power conditioner / sequencer, featuring Furman’s revolutionary SMP technology, LiFT, EVS and a high current TVZ-MOV. Furman's Series Multi-Stage Protection (SMP) circuit also features our exclusive Linear Filter Technology (LiFT) with Extreme Voltage Shutdown (EVS) and a high current TVZ-MOV. Together, these technologies comprise what is, without question, the world's most advanced and comprehensive transient voltage surge suppressorSMP (Series Multi-Stage Protection Plus)SMP surge suppression virtually eliminates service calls. Traditional surge suppression circuits sacrifice themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so with SMP. With Furman’s SMP, damaging transient voltages are safely absorbed, clamped and dissipated - no sacrificed parts, no service calls, no down time.Unique to Furman’s SMP is its unparalleled clamping voltage, even when tested beyond the grueling specifications of - USA/CIDA’s A-1-1 test. While other designs offer clamping voltages that are well above 300VAC peak (far beyond long accepted professional standards), Furman’s SMP clamps at 376VAC peak, 266 VAC RMS even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furman’s SMP technology.LiFT (Linear Filtering Technology)Unfortunately, traditional AC filter/conditioners have been designed for unrealistic laboratory conditions. Prior technologies could actually harm audio and video performance more than they help, due to the resonant peaking of their antiquated, non-linear designs. Under certain conditions, these designs can actually add more than 10 dB of noise to the incoming AC line! Worse still, lost digital data, the need to reboot digital presets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground. Furman’s SMP with LiFT takes another approach, ensuring optimal performance through linear filtering and no leakage to ground.E.V.S. (Extreme Voltage Shutdown)Furman’s trusted overvoltage circuitry protects against all too frequent accidental connections to high voltages by shutting off the incoming power until the overvoltage condition is corrected.Rear Panel BNC ConnectorFor rear panel illumination, a BNC connector is provided for connection of any standard gooseneck lamp, such as the Furman GN-LED or GN-I (sold separately).SequencingThe PS-8RE III Power Conditioner/Sequencers is capable of powering up a rack full of equipment in a 3-step delayed sequence. The sequence is reversed for power-down. The sequence can be initiated with either momentary or maintained switches, locally or remotely. A duplex outlet is provided fFeatures:Series Multi-Stage Protection (SMP) for virtually maintenance free protection from surges and spikes - no sacrificed parts, no service calls, and no downtimeFurman’s unequaled Linear Filtering Technology (LiFT) rids systems of AC line noise for consistent audio/video clarityAutomatic Extreme Voltage Shutdown (E.V.S.) powers down equipment during a prolonged extreme over-voltageSix sequenced rear panel outlets (in 3 groups), two switched rear panel outlets, and one front panel switched outletMomentary and Maintained sequencing via rear panel terminal block or front panel switch10 amp rating

Designed for the most critical, ultra-low noise installations, the P-2300 IT E supplies up to 10 amps of balanced AC power ideal for recording studios, broadcast stations, video production facilities, or any environment requiring a pristine, studio-quality signal-to-noise ratio.The P-2300 IT E features a specially wound and shielded toroidal balanced isolation transformer specifically designed to reduce hum pickup by sensitive equipment when ultra-low-noise is a must. Additionally, Furman’s revolutionary Series Multi-Stage Protection (SMP), Extreme Voltage Shutdown (EVS), and Linear Filtering Technology (LiFT) are combined to ensure what our customers have grown to expect from Furman — uncompromised protection and purification.Symmetrically Balanced PowerFurman’s Symmetrically Balanced Power provides a virtually invisible noise floor by reworking incoming AC into a balanced power output. Similar to a balanced audio signal, balanced power splits a single voltage path into two separate voltage paths which are in opposite polarity, cancelling out noise and distortion on the incoming line. This noise reduction is extraordinarily efficient and linear across a huge frequency range, unveiling harmonics, overtones and low-level signals commonly masked by AC line noise.Unmatched ProtectionFurman’s SMP and EVS circuitry safeguards equipment from transient voltage events (such as surges and spikes), as well as sustained overvoltage conditions (commonly caused by wiring faults), for complete and comprehensive protection of sensitive equipment.Innovative Convenience and Monitoring FeaturesThe P-2300 IT E’s front panel LED window displays incoming voltage or output current, with ”Protection OK”, ”Extreme Voltage” and color-coded ”Voltage Range” indicators for comprehensive power monitoring. A front panel USB outlet charges most personal media devices and cell phones right at your equipment rack. Universal IEC C-13 receptacles (12 rear panel, 2 front panel) and a removable power cord ensure compatibility with regional power requirementsFeatures:Symmetrically balanced power virtually eliminates common mode noise for the lowest noise floor possible.Furman’s exclusive SMP technology provides the highest level of surge & spike protection available.LiFT offers AC power filtering to ensure clean power for unequaled audio & video clarity.Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.Protection OK, Extreme Voltage and color-coded voltage range indicators provide information on power quality and operational status of unit.Large LED voltmeter/ammeter displays incoming voltage and output current draw.Isolated outlet banks minimize inter-component interference and noise contamination.Front panel USB convenience outlets allows you to charge most media devices or power a USB lamp.10 amp rating featuring a high inrush magnetic circuit breaker for added protection.14 total outlets (twelve rear panel outlets and two front panel convenience outlet)..

The mains power supply is the ‘gasoline’ that fuels an audio system. And, whether it is clean or contaminated, it has a material impact upon the quality/enjoyment of playback.The AC iPurifier is the latest iFi product from the ‘power products’ stable to clean-up noisy mains supplies. It is no ordinary mains purification product. Technologically advanced, it’s an active not a passive product so it goes above and beyond and cancels far more noise across the frequency range than other passive deviceFeatures:Active Noise Cancellation (ANC),  military technology, most advanced noise-cancellation available.Wireless Purification System, Complex circuit that significantly reduces power-line noise without audible or visible side-effects.Ground/Earth connection diagnostic,  detection of missing Ground/Earth.Polarity connection diagnostic, detection of polarity fault.Audio Earth connection, this adds a solid Ground/Earth with ground-loop prevention circuit built-in.Overvoltage Surge Protection, Auto-recovery.Specifications:Noise reduction: > 40dB (> 100x)Surge Protection: max. 30,000A @ 1,000V/10uSOperating Voltage: 90V – 265VSize/Weight: (USA): ø 40mm x 105mm (L) 108 (g) / 0.24 (lbs)(EU): ø 40mm x 115mm (L) 126 (g) / 0.28 (lbs)Warranty period: 12months