Turntables

Experience sophisticated sound with the Music Hall MMF Mark 1 turntable. Music Hall founder, Roy Hall’s signature sound can be heard in the entire Music Hall range, and the Mark 1 is no exception!Featuring an all-new tonearm design, the Mark 1 delivers exceptional rigidity and internal damping, with a precision aluminum headshell, CNC-machined tonearm flange, and fully adjustable VTA – a feature almost never seen in this price-range. The magnetic anti-skating feature and factory-set pre-adjusted and fixed counterweight make setup a breeze.The Mark 1 also boasts a high-quality, super-fast, and dynamic low mass Ortofon OM 5E cartridge, perfectly matched to the characteristics of the tonearm, creating a beautiful, full-bodied sound that until now has been impossible to achieve in a budget turntable. With the Music Hall MMF Mark 1, you can enjoy premium audio performance without compromise.Feature List:extremely quiet belt drive, 2-speed turntablealuminum die-cast platter33 1⁄3 and 45rpmbuilt-in phono amp or direct line outstatic balanced S-shaped tonearm w/detachable headshellhigh quality Ortofon OM 5E cartridge properly aligned and mountedanti-skating control for increased stereo balance+/- 10% adjustable pitch controldust cover includeddesigned and developed in the US and Francew17.7 x d13.8 x h5.7in12lbs (package) 5.5kglow noise, belt-drive designhigh-gloss piano lacquer finish or walnut veneerhigh quality 8.6” S-shape aluminium tonearmprecision aluminium headshell and VTA adjustmentdynamically balanced and damped counterweightmagnetic anti-skatingAC synchronous motor for superior speed stabilityprecision stainless steel main bearing sheathed in Tef-lon® for noise-free fluid operationdynamically balanced alloy platter with soft felt mathigh quality gold RCA connectorsspecial vibration-damping adjustable feetdust cover and 45rpm adaptor included

The Music Hall MMF11.3 turntable is a result of the passion and expertise of its designer, Roy Hall. Years of research and development have culminated in this masterpiece, which boasts a unique quadruple-plinth design with improved TPE vibration isolation and a new freestanding and completely isolated motor assembly.The MMF11.3's fully adjustable VTA, azimuth, and dampened arm lift, along with its exclusive microprocessor electronic speed control with dual motor single flywheel drive system, allow for precise control and an unrivaled listening experience. The 9cc Evolution carbon fiber tonearm uses hardened Swiss ABEC 7 ball races in inverted bearing and is internally wired with flexible wire drawn from high purity copper.This turntable's inverted ceramic main bearing ensures ultra-quiet operation, while its adjustable magnetic-levitation feet and one-piece 7.4 lbs. (3.35 kg) acrylic platter provide superior stability and reduced vibration. The MMF11.3 also comes with a detachable phono cable, high quality gold-plated RCA connectors, and a large removable acrylic dust cover.Packed securely in a substantial wood box and with an excellent instruction manual for easy assembly, the Music Hall MMF11.3 turntable is the pinnacle of design and performance. Experience the ultimate in audio fidelity and bring your vinyl collection to life with the MMF11.3.Features List:music hall’s unique quadruple-plinth design with improved TPE vibration isolationnew freestanding and completely isolated motor assemblydual motor and flywheel assembly is located on the center left side of the turntable eliminating all motor and belt vibration from the cartridgeone-piece 9cc Evolution carbon fiber tonearmtonearm uses hardened Swiss ABEC 7 ball races in inverted bearingtonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectorscounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperfully adjustable VTA, azimuth, and dampened arm liftexclusive microprocessor electronic speed control with dual motor single flywheel drive system33 1/3 and 45rpm speed change at the touch of a buttonadjustable magnetic-levitation feetinverted ceramic main bearing for ultra-quiet operation7.4lbs (3.35kg) acrylic platterdetachable phono cablehigh quality gold-plated RCA connectorsdisplay-style large removable acrylic dust coverpacked securely in a substantial wood boxexcellent instruction manual and easy assembly

The Music Hall MMF11.3 turntable is a result of the passion and expertise of its designer, Roy Hall. Years of research and development have culminated in this masterpiece, which boasts a unique quadruple-plinth design with improved TPE vibration isolation and a new freestanding and completely isolated motor assembly.The MMF11.3's fully adjustable VTA, azimuth, and dampened arm lift, along with its exclusive microprocessor electronic speed control with dual motor single flywheel drive system, allow for precise control and an unrivaled listening experience. The 9cc Evolution carbon fiber tonearm uses hardened Swiss ABEC 7 ball races in inverted bearing and is internally wired with flexible wire drawn from high purity copper.This turntable's inverted ceramic main bearing ensures ultra-quiet operation, while its adjustable magnetic-levitation feet and one-piece 7.4 lbs. (3.35 kg) acrylic platter provide superior stability and reduced vibration. The MMF11.3 also comes with a detachable phono cable, high quality gold-plated RCA connectors, and a large removable acrylic dust cover. The combination of the Music Hall MMF 11.3 with the Ortofon Cadenza cartridge is an excellent choice for audiophiles seeking high sound quality and precision. The Ortofon Cadenza, especially the Cadenza Black model, is renowned for its exceptional clarity, frequency reproduction accuracy, and sound transparency.Packed securely in a substantial wood box and with an excellent instruction manual for easy assembly, the Music Hall MMF11.3 turntable is the pinnacle of design and performance. Experience the ultimate in audio fidelity and bring your vinyl collection to life with the MMF11.3.Features List:music hall’s unique quadruple-plinth design with improved TPE vibration isolationnew freestanding and completely isolated motor assemblydual motor and flywheel assembly is located on the center left side of the turntable eliminating all motor and belt vibration from the cartridgeone-piece 9cc Evolution carbon fiber tonearmtonearm uses hardened Swiss ABEC 7 ball races in inverted bearingtonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectorsOrtofon Cadenza Black pre-installed and calibratedcounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperfully adjustable VTA, azimuth, and dampened arm liftexclusive microprocessor electronic speed control with dual motor single flywheel drive system33 1/3 and 45rpm speed change at the touch of a buttonadjustable magnetic-levitation feetinverted ceramic main bearing for ultra-quiet operation7.4lbs (3.35kg) acrylic platterdetachable phono cablehigh quality gold-plated RCA connectorsdisplay-style large removable acrylic dust coverpacked securely in a substantial wood boxexcellent instruction manual and easy assembly

The Music Hall MMF11.3 turntable is a result of the passion and expertise of its designer, Roy Hall. Years of research and development have culminated in this masterpiece, which boasts a unique quadruple-plinth design with improved TPE vibration isolation and a new freestanding and completely isolated motor assembly.The MMF11.3's fully adjustable VTA, azimuth, and dampened arm lift, along with its exclusive microprocessor electronic speed control with dual motor single flywheel drive system, allow for precise control and an unrivaled listening experience. The 9cc Evolution carbon fiber tonearm uses hardened Swiss ABEC 7 ball races in inverted bearing and is internally wired with flexible wire drawn from high purity copper.This turntable's inverted ceramic main bearing ensures ultra-quiet operation, while its adjustable magnetic-levitation feet and one-piece 7.4 lbs. (3.35 kg) acrylic platter provide superior stability and reduced vibration. The MMF11.3 also comes with a detachable phono cable, high quality gold-plated RCA connectors, and a large removable acrylic dust cover. The combination of the Music Hall MMF 11.3 with the Ortofon Cadenza cartridge is an excellent choice for audiophiles seeking high sound quality and precision. The Ortofon Cadenza, especially the Cadenza Black model, is renowned for its exceptional clarity, frequency reproduction accuracy, and sound transparency.Packed securely in a substantial wood box and with an excellent instruction manual for easy assembly, the Music Hall MMF11.3 turntable is the pinnacle of design and performance. Experience the ultimate in audio fidelity and bring your vinyl collection to life with the MMF11.3.Features List:music hall’s unique quadruple-plinth design with improved TPE vibration isolationnew freestanding and completely isolated motor assemblydual motor and flywheel assembly is located on the center left side of the turntable eliminating all motor and belt vibration from the cartridgeone-piece 9cc Evolution carbon fiber tonearmtonearm uses hardened Swiss ABEC 7 ball races in inverted bearingtonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectorsOrtofon Cadenza Black pre-installed and calibratedcounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperfully adjustable VTA, azimuth, and dampened arm liftexclusive microprocessor electronic speed control with dual motor single flywheel drive system33 1/3 and 45rpm speed change at the touch of a buttonadjustable magnetic-levitation feetinverted ceramic main bearing for ultra-quiet operation7.4lbs (3.35kg) acrylic platterdetachable phono cablehigh quality gold-plated RCA connectorsdisplay-style large removable acrylic dust coverpacked securely in a substantial wood boxexcellent instruction manual and easy assembly

The Music Hall MMF-9.3 SE Turntable is an audiophile-grade, two-speed belt-driven turntable featuring a distinctive triple plinth construction that isolates the critical sound reproducing components for the best possible performance. The turntable boasts a classic-looking walnut real wood veneer finish that exudes elegance and sophistication.The MMF-9.3 SE comes equipped with a one-piece full carbon fiber tonearm with a counterweight that is decoupled from the arm and acts as a resonance damper. The completely isolated/decoupled DC motor has 33 1⁄3 and 45 rpm speed controls located in the front left corner of the turntable to cancel out any potential vibration from the motor/belt to the cartridge.In addition to the optional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylus, the MMF-9.3 SE includes an inverted ceramic main bearing for super quiet, fluid operation, a non-resonant 1” thick acrylic platter, and high-quality gold RCA connectors and detachable phono cable. It also comes with adjustable tip toe feet with anti-scratch cups, a built-in round spirit level for proper leveling, and a dust cover and 45 rpm adaptor. With excellent instruction manual and easy assembly, the MMF-9.3 SE is a true standout turntable.Feature List:music hall’s unique triple plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 1⁄3 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance damping puckoptional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylusthe cartridge supplied is properly aligned and mountedinverted ceramic main bearing for super quiet, fluid operationnon resonant, 1” thick acrylic plattersoft felt platter mathigh quality gold RCA connectors and detachable phono cableadjustable tip toe feet with anti scratch cupslow noise fully manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly

Elevate your music experience with the Music Hall MMF-7.3 Turntable. This exceptional turntable boasts a unique dual-plinth construction, which minimizes unwanted resonance and vibrations for the most accurate sound reproduction possible.Featuring a one-piece full carbon fiber tonearm and fully adjustable VTA, azimuth, and dampened arm lift mechanism, the MMF-7.3 allows for precise tracking and retrieval of musical nuances. The turntable's counterweight's center of gravity is level with the stylus tip, reducing unwanted resonances and vibrations and acting as a resonance damper for superior sound quality.The MMF-7.3 comes with an Ortofon 2M Bronze cartridge with a nude fine line stylus, properly aligned and mounted for the highest quality playback possible. The precision stainless steel main bearing sheathed in Teflon ensures noise-free, fluid operation, while the non-resonant acrylic platter with metal screw-on record clamp and soft felt mat provide exceptional stability and record coupling for improved playback.Experience music like never before with the Music Hall MMF-7.3 Turntable. With its exceptional design, cutting-edge tonearm technology, and superior cartridge options, this turntable is a must-have for any music enthusiast.Feature List:music hall’s unique dual-plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance-damping puckOrtofon 2M Bronze cartridge with a nude fine line stylusthe supplied cartridge is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operationnon-resonant acrylic platter with metal screw-on record clamp and soft felt mathigh-quality gold RCA connectors and detachable phono cableadjustable tip-toe feet with anti scratch cupslow-noise, fully-manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly

Elevate your music experience with the Music Hall MMF-7.3 Turntable. This exceptional turntable boasts a unique dual-plinth construction, which minimizes unwanted resonance and vibrations for the most accurate sound reproduction possible.Featuring a one-piece full carbon fiber tonearm and fully adjustable VTA, azimuth, and dampened arm lift mechanism, the MMF-7.3 allows for precise tracking and retrieval of musical nuances. The turntable's counterweight's center of gravity is level with the stylus tip, reducing unwanted resonances and vibrations and acting as a resonance damper for superior sound quality.The MMF-7.3 comes with an Ortofon 2M Bronze cartridge with a nude fine line stylus, properly aligned and mounted for the highest quality playback possible. The precision stainless steel main bearing sheathed in Teflon ensures noise-free, fluid operation, while the non-resonant acrylic platter with metal screw-on record clamp and soft felt mat provide exceptional stability and record coupling for improved playback.Experience music like never before with the Music Hall MMF-7.3 Turntable. With its exceptional design, cutting-edge tonearm technology, and superior cartridge options, this turntable is a must-have for any music enthusiast.Feature List:music hall’s unique dual-plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance-damping puckOrtofon 2M Bronze cartridge with a nude fine line stylusthe supplied cartridge is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operationnon-resonant acrylic platter with metal screw-on record clamp and soft felt mathigh-quality gold RCA connectors and detachable phono cableadjustable tip-toe feet with anti scratch cupslow-noise, fully-manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly

Looking for an exceptional sound performance with uncompromising features? The music hall MMF-3.3 turntable is the perfect entry-level table for audiophiles seeking a stunning listening experience. With over 30 years of research and development behind it, this exquisite turntable utilizes unique dual-plinth technology to isolate the electronics and motor from the main bearing and tonearm, ensuring superior sound quality.The MMF-3.3 comes complete with a carbon fiber tonearm and precision-mounted Ortofon 2M Red cartridge for unparalleled tracking ability and exceptional performance. The arm is housed in a 4-point gimbal bearing construction using Swiss ABEC bearings, providing a superior experience compared to competitors' lesser 2-point bearing systems.With built-in electronic speed control for 33/45/and 78, switching speeds is a breeze at the touch of a button. The exquisite red finish of the MMF-3.3 is complemented by high-quality components such as special vibration damping adjustable feet, a high-precision stainless steel and bronze main bearing assembly, and gold RCA connectors with detachable phono cable.Rediscover the warmth and richness of your vinyl collection with the MMF-3.3. The perfect choice for audiophiles seeking a high-end turntable that delivers exceptional sound quality and uncompromising features. Don't settle for less when it comes to your music - upgrade to the MMF-3.3 today!Feature List:Music Hall’s unique dual-plinth design – isolating the electronics and motor from the main bearing and tonearm33⅓, 45, or 78rpm speeds at the touch of a buttonElectronic speed controlled DC motor for superior speed stability, isolated on lower plinthCustom carbon fiber tonearm with alloy headshell for superb tracking abilityFlexible internal tonearm wire drawn from high purity copperCounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperHighly regarded Ortofon 2M Red cartridge with replaceable elliptical stylusThe cartridge supplied is properly aligned and mountedHigh precision stainless steel and bronze main bearing assembly for quiet fluid operationSpecial vibration damping adjustable feetHigh quality gold RCA connectors with detachable phono cableFull-size alloy platter and felt matQuick and easy to assembleDust cover and 45rpm adaptor included

Looking for an exceptional sound performance with uncompromising features? The music hall MMF-3.3 turntable is the perfect entry-level table for audiophiles seeking a stunning listening experience. With over 30 years of research and development behind it, this exquisite turntable utilizes unique dual-plinth technology to isolate the electronics and motor from the main bearing and tonearm, ensuring superior sound quality.The MMF-3.3SE comes complete with a carbon fiber tonearm and precision-mounted Ortofon 2M Red cartridge for unparalleled tracking ability and exceptional performance. The arm is housed in a 4-point gimbal bearing construction using Swiss ABEC bearings, providing a superior experience compared to competitors' lesser 2-point bearing systems.With built-in electronic speed control for 33/45/and 78, switching speeds is a breeze at the touch of a button. The exquisite white finish of the MMF-3.3 is complemented by high-quality components such as special vibration damping adjustable feet, a high-precision stainless steel and bronze main bearing assembly, and gold RCA connectors with detachable phono cable.Rediscover the warmth and richness of your vinyl collection with the MMF-3.3. The perfect choice for audiophiles seeking a high-end turntable that delivers exceptional sound quality and uncompromising features. Don't settle for less when it comes to your music - upgrade to the MMF-3.3 today!Feature List:Music Hall’s unique dual-plinth design – isolating the electronics and motor from the main bearing and tonearm33⅓, 45, or 78rpm speeds at the touch of a buttonElectronic speed controlled DC motor for superior speed stability, isolated on lower plinthCustom carbon fiber tonearm with alloy headshell for superb tracking abilityFlexible internal tonearm wire drawn from high purity copperCounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperHighly regarded Ortofon 2M Red cartridge with replaceable elliptical stylusThe cartridge supplied is properly aligned and mountedHigh precision stainless steel and bronze main bearing assembly for quiet fluid operationSpecial vibration damping adjustable feetHigh quality gold RCA connectors with detachable phono cableFull-size alloy platter and felt matQuick and easy to assembleDust cover and 45rpm adaptor included

Meet the Music Hall MMF-2.3 turntable, the perfect mix of beauty and precision. With a top tier 8.6” carbon fiber tonearm and vibration damping adjustable feet, the MMF-2.3 is an excellent choice for any music lover. This table boasts a low noise fully manual belt-drive design, a separately isolated DC synchronous motor, and two-speed stepped motor pulley for 33 1⁄3 and 45 rpm. The included music hall Spirit moving-magnet cartridge with replaceable elliptical stylus has been properly aligned and mounted for superior sound.Constructed with high-quality components, the MMF-2.3 focuses on the critical components: bearing, motor, and tonearm, for quiet, fluid operation. The high precision stainless steel and bronze bearing assembly ensures accurate speed and stability, while the full-size alloy platter and felt mat deliver optimal sound. The tonearm is fully adjustable for VTA and azimuth, with a 4-point gimbal bearing assembly using ultra-precision ABEC bearings. The MMF-2.3 even includes detachable phono cables and a dust cover.Not only does the MMF-2.3 turntable offer amazing performance, but it also comes in three stunning finishes: Gloss White, Gloss Black, and Ferrari Red. Quick and easy to assemble, this table is perfect for anyone looking for a high-quality, easy-to-use turntable that delivers an outstanding listening experience. Don't wait, get your hands on the Music Hall MMF-2.3 turntable today and take your vinyl listening to the next level.including phono-preamp Feature List:special vibration damping adjustable feettop tier 8.6” carbon fiber tonearm with aluminum headshellfully adjustable VTA, azimuth, and dampened arm lift mechanismtonearm features a 4-point gimbal bearing assembly using ultra-precision ABEC bearingslow noise fully manual belt-drive designseparately isolated DC synchronous motor for superior speed stabilitytwo-speed stepped motor pulley for 33 1⁄3 and 45rpmmusic hall Spirit moving-magnet cartridge with replaceable elliptical stylusthe cartridge supplied is properly aligned and mountedhigh precision stainless steel and bronze bearing assembly for quiet, fluid operationhigh quality gold RCA connectors with detachable phono cablefull-size alloy platter and felt matexcellent instruction manualquick and easy to assembledust cover and 45rpm adaptor

The Elipson Chroma 400 is a belt-driven manual turntable with an elegant design offering a lacquered paint or satin wood finish. Benefiting from our latest electronic and mechanical technologies, it is assembled in France in our premises.The Elipson Chroma 400 offers the characteris-tics that contributed to the success of the Omega models such as the OTT (Orbital Torsion Tonearm) tonearm in carbon, its digital processing system of the motor rotation. It is distinguished by a new axis system for an even more precise rotation, an improved drive motor with optimized damping, a graduated counterweight, as well as by the addition of a cue control lever for your comfort of use.

The Elipson Chroma 400 is a belt-driven manual turntable with an elegant design offering a lacquered paint or satin wood finish. Benefiting from our latest electronic and mechanical technologies, it is assembled in France in our premises.The Elipson Chroma 400 offers the characteris-tics that contributed to the success of the Omega models such as the OTT (Orbital Torsion Tonearm) tonearm in carbon, its digital processing system of the motor rotation. It is distinguished by a new axis system for an even more precise rotation, an improved drive motor with optimized damping, a graduated counterweight, as well as by the addition of a cue control lever for your comfort of use.

DescriptionTHORENS is expanding its range and is presenting another fully automatic turntable for all vinyl fans with the brand-new modelThe TD 101 A is the little brother of the TD 102A and open a completely new chapter in the field of fully automatic turntables from THORENS. The newly developed mechanics of the TD 101 A guarantee the lowest possible frictional resistance of all mechanical components.The turntable comes with a newly developed aluminum tonearm, including the preassembled AT 3600 cartridge from Audio Technica. The switchable integrated phono preamplifier guarantees complete connectivity with all modern audio systems.

The Music Hall MMF11.3 turntable is a result of the passion and expertise of its designer, Roy Hall. Years of research and development have culminated in this masterpiece, which boasts a unique quadruple-plinth design with improved TPE vibration isolation and a new freestanding and completely isolated motor assembly.The MMF11.3's fully adjustable VTA, azimuth, and dampened arm lift, along with its exclusive microprocessor electronic speed control with dual motor single flywheel drive system, allow for precise control and an unrivaled listening experience. The 9cc Evolution carbon fiber tonearm uses hardened Swiss ABEC 7 ball races in inverted bearing and is internally wired with flexible wire drawn from high purity copper.This turntable's inverted ceramic main bearing ensures ultra-quiet operation, while its adjustable magnetic-levitation feet and one-piece 7.4 lbs. (3.35 kg) acrylic platter provide superior stability and reduced vibration. The MMF11.3 also comes with a detachable phono cable, high quality gold-plated RCA connectors, and a large removable acrylic dust cover.Packed securely in a substantial wood box and with an excellent instruction manual for easy assembly, the Music Hall MMF11.3 turntable is the pinnacle of design and performance. Experience the ultimate in audio fidelity and bring your vinyl collection to life with the MMF11.3.Features List:music hall’s unique quadruple-plinth design with improved TPE vibration isolationnew freestanding and completely isolated motor assemblydual motor and flywheel assembly is located on the center left side of the turntable eliminating all motor and belt vibration from the cartridgeone-piece 9cc Evolution carbon fiber tonearmtonearm uses hardened Swiss ABEC 7 ball races in inverted bearingtonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectorscounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperfully adjustable VTA, azimuth, and dampened arm liftexclusive microprocessor electronic speed control with dual motor single flywheel drive system33 1/3 and 45rpm speed change at the touch of a buttonadjustable magnetic-levitation feetinverted ceramic main bearing for ultra-quiet operation7.4lbs (3.35kg) acrylic platterdetachable phono cablehigh quality gold-plated RCA connectorsdisplay-style large removable acrylic dust coverpacked securely in a substantial wood boxexcellent instruction manual and easy assembly

The Music Hall MMF-9.3 SE Turntable is an audiophile-grade, two-speed belt-driven turntable featuring a distinctive triple plinth construction that isolates the critical sound reproducing components for the best possible performance. The turntable boasts a classic-looking walnut real wood veneer finish that exudes elegance and sophistication.The MMF-9.3 SE comes equipped with a one-piece full carbon fiber tonearm with a counterweight that is decoupled from the arm and acts as a resonance damper. The completely isolated/decoupled DC motor has 33 1⁄3 and 45 rpm speed controls located in the front left corner of the turntable to cancel out any potential vibration from the motor/belt to the cartridge.In addition to the optional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylus, the MMF-9.3 SE includes an inverted ceramic main bearing for super quiet, fluid operation, a non-resonant 1” thick acrylic platter, and high-quality gold RCA connectors and detachable phono cable. It also comes with adjustable tip toe feet with anti-scratch cups, a built-in round spirit level for proper leveling, and a dust cover and 45 rpm adaptor. With excellent instruction manual and easy assembly, the MMF-9.3 SE is a true standout turntable.Feature List:music hall’s unique triple plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 1⁄3 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance damping puckoptional Goldring Eroica LX low-output moving-coil cartridge with Gyger II line contact stylusthe cartridge supplied is properly aligned and mountedinverted ceramic main bearing for super quiet, fluid operationnon resonant, 1” thick acrylic plattersoft felt platter mathigh quality gold RCA connectors and detachable phono cableadjustable tip toe feet with anti scratch cupslow noise fully manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly

Elevate your music experience with the Music Hall MMF-7.3 Turntable. This exceptional turntable boasts a unique dual-plinth construction, which minimizes unwanted resonance and vibrations for the most accurate sound reproduction possible.Featuring a one-piece full carbon fiber tonearm and fully adjustable VTA, azimuth, and dampened arm lift mechanism, the MMF-7.3 allows for precise tracking and retrieval of musical nuances. The turntable's counterweight's center of gravity is level with the stylus tip, reducing unwanted resonances and vibrations and acting as a resonance damper for superior sound quality.The MMF-7.3 comes with an Ortofon 2M Bronze cartridge with a nude fine line stylus, properly aligned and mounted for the highest quality playback possible. The precision stainless steel main bearing sheathed in Teflon ensures noise-free, fluid operation, while the non-resonant acrylic platter with metal screw-on record clamp and soft felt mat provide exceptional stability and record coupling for improved playback.Experience music like never before with the Music Hall MMF-7.3 Turntable. With its exceptional design, cutting-edge tonearm technology, and superior cartridge options, this turntable is a must-have for any music enthusiast.Feature List:music hall’s unique dual-plinth constructionone-piece full carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance dampercompletely isolated/decoupled DC motor with 33 and 45rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridgemotor sits on its own resonance-damping puckOrtofon 2M Bronze cartridge with a nude fine line stylusthe supplied cartridge is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operationnon-resonant acrylic platter with metal screw-on record clamp and soft felt mathigh-quality gold RCA connectors and detachable phono cableadjustable tip-toe feet with anti scratch cupslow-noise, fully-manual belt drive designbuilt-in round spirit level for proper levelingdust cover and 45rpm adaptor includedexcellent instruction manual and easy assembly

The MMF-5.3's distinctive design features top and bottom platforms separated by viso-elastic cones, which provide vibration damping. The turntable comes complete with an Ortofon 2M Blue cartridge, properly aligned and mounted, and a counterweight that is decoupled from the arm to act as a resonance damper. The precision stainless steel main bearing is sheathed in Teflon for noise-free fluid operation.The MMF-5.3 is more than just a turntable - it's a complete package. The gorgeous high-gloss piano black lacquer finish, top-tier 9" carbon fiber tonearm, and fully adjustable VTA, azimuth, and dampened arm lift mechanism make this turntable a work of art. The DC synchronous motor provides superior speed stability, and the two-speed stepped motor pulley allows for 33 1/3 and 45 rpm playback. Other features include high-quality gold RCA connectors, detachable phono cable, special vibration damping adjustable feet, built-in round spirit level for proper leveling, and a dust cover and 45 rpm adapter. The Music Hall MMF-5.3 Turntable truly has it all.Feature List:Music Hall’s unique dual-plinth constructiontop tier 9” carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damperDC synchronous motor for superior speed stability, separately isolated on the lower platformtwo-speed stepped motor pulley for 33 1/3 and 45rpmOrtofon 2M Blue cartridge with replaceable nude elliptical diamond stylusthe cartridge supplied is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free fluid operationalloy platter with soft felt mat screw-on record clamphigh quality gold RCA connectorsdetachable phono cablespecial vibration damping adjustable feetbuilt-in round spirit level for proper levelinglow noise fully manual belt-drive designexcellent instruction manual and easy assemblydust cover and 45rpm adaptor included

The Music Hall Stealth Turntable is a game changer for vinyl enthusiasts. The first direct drive turntable from Music Hall, the Stealth features a brushless, low-torque motor that automatically stops running at the end of a record. But that's not all - this 11kg turntable is built with an unusually heavy, multi-layer and well-damped chassis, and large, viscous-elastomer damped height-adjustable feet that attenuate external vibrations.With touch-activated speed controls for ease of use, the Stealth is a 3-speed direct drive turntable that comes complete with an S-shaped tonearm, a detachable headshell, and a factory-mounted, precision aligned Ortofon 2M Blue cartridge. You can adjust the VTA of the aluminum tonearm while the record is playing, and the platter is a hefty 1.8kg, elastomer-damped aluminum construction.The Stealth is not just a beautiful turntable - it's a sound foundation for your vinyl collection. The vibration-damping rubber platter mat and feet work together to reduce unwanted resonance and noise, while the Ortofon 2M Blue cartridge delivers a clear, detailed sound. And when you're done listening, simply use the touch controls to stop the motor, or let the automatic standby mode kick in after 20 minutes of non-use. The Stealth also comes with removable RCA cables and a cloth dust cover for easy storage. Overall, the Music Hall Stealth Turntable is a top-of-the-line choice for vinyl enthusiasts looking for a direct drive design and exceptional performance.Feature List:direct drive designlow torque, brushless motor touch-activated electronic speed control33 1⁄3, 45, and 78rpmmotor automatically stops at the end of the recordautomatic standby mode activated after 20 minutes of non-usealuminum tonearm with VTA that can be adjusted while the record is playingremovable head shellOrtofon 2M Blue cartridge comes pre-mounted and precision-aligned1.8kg aluminum plattervibration-damping rubber platter matvibration-damping feetcloth dust coverremovable RCA cables

The Music Hall MMF-5.3SE Walnut Turntable is a top-of-the-line audio device designed for audiophiles who want the best sound quality possible. Its dual-plinth construction, with the critical sound reproducing components on the top platform and the motor, switch, wiring, and feet on the bottom platform, ensures that the sound is clear, precise, and free from interference.The MMF-5.3SE's gorgeous walnut real wood veneer finish and classic design make it a stylish addition to any room. It comes complete with a top-tier 9" carbon fiber tonearm that is fully adjustable, as well as a precision stainless steel main bearing sheathed in Teflon for noise-free fluid operation. The turntable also features a counterweight that is decoupled from the arm to act as a resonance damper, a DC synchronous motor for superior speed stability, and a two-speed stepped motor pulley for 33 1/3 and 45 rpm playback.Other features of the MMF-5.3SE include high-quality gold RCA connectors, detachable phono cable, special vibration damping adjustable feet, built-in round spirit level for proper leveling, and a dust cover and 45 rpm adapter. The Music Hall MMF-5.3SE Walnut Turntable truly has it all, and is a must-have for anyone who values high-quality sound and stylish designFeature List:Music Hall’s unique dual-plinth constructiontop tier 9” carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damperDC synchronous motor for superior speed stability, separately isolated on the lower platformtwo-speed stepped motor pulley for 33 1/3 and 45rpmOrtofon 2M Blue cartridge with replaceable nude elliptical diamond stylusthe cartridge supplied is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free fluid operationalloy platter with soft felt mat screw-on record clamphigh quality gold RCA connectorsdetachable phono cablespecial vibration damping adjustable feetbuilt-in round spirit level for proper levelinglow noise fully manual belt-drive designexcellent instruction manual and easy assemblydust cover and 45rpm adaptor included

mmf-5.3 TurntableThe Music Hall mmf-5.3 turntable is 2-Speed belt driven audiophile turntable employing the unique dual-plinth construction originated by Music Hall.Distinctive DesignThe distinctive design isolates the critical sound reproducing components; platter, main bearing, tonearm, and cartridge on the top platform from the motor, switch, wiring, and feet which are mounted on the bottom platform.A Complete PackageViso-elastic cones separate the two platforms and provide vibration damping. The mmf-5.3 comes complete with an Ortofon 2M Blue cartridge.Dust CoverThe included hinged dust cover keeps your mmf-5.3wh protected.Pre-Mounted CartridgeAn Ortofon 2M Blue cartridge comes precision mounted and aligned.Built-In LevelThe 5.3wh has a built-in round spirit level for proper leveling.Rear Viewtop-quality RCA jacks and special vibration damping adjustable feet.Feature List:Music Hall’s unique dual-plinth constructiontop tier 9” carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damperDC synchronous motor for superior speed stability, separately isolated on the lower platformtwo-speed stepped motor pulley for 33 1/3 and 45rpmOrtofon 2M Blue cartridge with replaceable nude elliptical diamond stylusthe cartridge supplied is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free fluid operationalloy platter with soft felt mat screw-on record clamphigh quality gold RCA connectorsdetachable phono cablespecial vibration damping adjustable feetbuilt-in round spirit level for proper levelinglow noise fully manual belt-drive designexcellent instruction manual and easy assemblydust cover and 45rpm adaptor included

The MMF-5.3's distinctive design features top and bottom platforms separated by viso-elastic cones, which provide vibration damping. The turntable comes complete with an Ortofon 2M Blue cartridge, properly aligned and mounted, and a counterweight that is decoupled from the arm to act as a resonance damper. The precision stainless steel main bearing is sheathed in Teflon for noise-free fluid operation.The MMF-5.3 is more than just a turntable - it's a complete package. The gorgeous high-gloss red colored lacquer finish, top-tier 9" carbon fiber tonearm, and fully adjustable VTA, azimuth, and dampened arm lift mechanism make this turntable a work of art. The DC synchronous motor provides superior speed stability, and the two-speed stepped motor pulley allows for 33 1/3 and 45 rpm playback. Other features include high-quality gold RCA connectors, detachable phono cable, special vibration damping adjustable feet, built-in round spirit level for proper leveling, and a dust cover and 45 rpm adapter. The Music Hall MMF-5.3 Turntable truly has it all.Feature List:Music Hall’s unique dual-plinth constructiontop tier 9” carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damperDC synchronous motor for superior speed stability, separately isolated on the lower platformtwo-speed stepped motor pulley for 33 1/3 and 45rpmOrtofon 2M Blue cartridge with replaceable nude elliptical diamond stylusthe cartridge supplied is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free fluid operationalloy platter with soft felt mat screw-on record clamphigh quality gold RCA connectorsdetachable phono cablespecial vibration damping adjustable feetbuilt-in round spirit level for proper levelinglow noise fully manual belt-drive designexcellent instruction manual and easy assemblydust cover and 45rpm adaptor included

The Music HAll MMF-5.3's distinctive design features top and bottom platforms separated by viso-elastic cones, which provide vibration damping. The turntable comes complete with an Ortofon 2M Blue cartridge, properly aligned and mounted, and a counterweight that is decoupled from the arm to act as a resonance damper. The precision stainless steel main bearing is sheathed in Teflon for noise-free fluid operation.The MMF-5.3 is more than just a turntable - it's a complete package. The gorgeous high-gloss piano black lacquer finish, top-tier 9" carbon fiber tonearm, and fully adjustable VTA, azimuth, and dampened arm lift mechanism make this turntable a work of art. The DC synchronous motor provides superior speed stability, and the two-speed stepped motor pulley allows for 33 1/3 and 45 rpm playback. Other features include high-quality gold RCA connectors, detachable phono cable, special vibration damping adjustable feet, built-in round spirit level for proper leveling, and a dust cover and 45 rpm adapter. The Music Hall MMF-5.3 Turntable truly has it all.Feature List:Music Hall’s unique dual-plinth constructiontop tier 9” carbon fiber tonearmfully adjustable VTA, azimuth, and dampened arm lift mechanismcounterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damperDC synchronous motor for superior speed stability, separately isolated on the lower platformtwo-speed stepped motor pulley for 33 1/3 and 45rpmOrtofon 2M Blue cartridge with replaceable nude elliptical diamond stylusthe cartridge supplied is properly aligned and mountedprecision stainless steel main bearing sheathed in Teflon® for noise-free fluid operationalloy platter with soft felt mat screw-on record clamphigh quality gold RCA connectorsdetachable phono cablespecial vibration damping adjustable feetbuilt-in round spirit level for proper levelinglow noise fully manual belt-drive designexcellent instruction manual and easy assemblydust cover and 45rpm adaptor included

Looking for an exceptional sound performance with uncompromising features? The music hall MMF-3.3SE turntable is the perfect entry-level table for audiophiles seeking a stunning listening experience. With over 30 years of research and development behind it, this exquisite turntable utilizes unique dual-plinth technology to isolate the electronics and motor from the main bearing and tonearm, ensuring superior sound quality.The MMF-3.3SE comes complete with a carbon fiber tonearm and precision-mounted Ortofon 2M Red cartridge for unparalleled tracking ability and exceptional performance. The arm is housed in a 4-point gimbal bearing construction using Swiss ABEC bearings, providing a superior experience compared to competitors' lesser 2-point bearing systems.With built-in electronic speed control for 33/45/and 78, switching speeds is a breeze at the touch of a button. The exquisite walnut veneer finish of the MMF-3.3SE is complemented by high-quality components such as special vibration damping adjustable feet, a high-precision stainless steel and bronze main bearing assembly, and gold RCA connectors with detachable phono cable.Rediscover the warmth and richness of your vinyl collection with the MMF-3.3SE. The perfect choice for audiophiles seeking a high-end turntable that delivers exceptional sound quality and uncompromising features. Don't settle for less when it comes to your music - upgrade to the MMF-3.3SE today!Feature List:Music Hall’s unique dual-plinth design – isolating the electronics and motor from the main bearing and tonearm33⅓, 45, or 78rpm speeds at the touch of a buttonElectronic speed controlled DC motor for superior speed stability, isolated on lower plinthCustom carbon fiber tonearm with alloy headshell for superb tracking abilityFlexible internal tonearm wire drawn from high purity copperCounterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damperHighly regarded Ortofon 2M Red cartridge with replaceable elliptical stylusThe cartridge supplied is properly aligned and mountedHigh precision stainless steel and bronze main bearing assembly for quiet fluid operationSpecial vibration damping adjustable feetHigh quality gold RCA connectors with detachable phono cableFull-size alloy platter and felt matQuick and easy to assembleDust cover and 45rpm adaptor included

Meet the Music Hall MMF-2.3 turntable, the perfect mix of beauty and precision. With a top tier 8.6” carbon fiber tonearm and vibration damping adjustable feet, the MMF-2.3 is an excellent choice for any music lover. This table boasts a low noise fully manual belt-drive design, a separately isolated DC synchronous motor, and two-speed stepped motor pulley for 33 1⁄3 and 45 rpm. The included music hall Spirit moving-magnet cartridge with replaceable elliptical stylus has been properly aligned and mounted for superior sound.Constructed with high-quality components, the MMF-2.3 focuses on the critical components: bearing, motor, and tonearm, for quiet, fluid operation. The high precision stainless steel and bronze bearing assembly ensures accurate speed and stability, while the full-size alloy platter and felt mat deliver optimal sound. The tonearm is fully adjustable for VTA and azimuth, with a 4-point gimbal bearing assembly using ultra-precision ABEC bearings. The MMF-2.3 even includes detachable phono cables and a dust cover.Not only does the MMF-2.3 turntable offer amazing performance, but it also comes in three stunning finishes: Gloss White, Gloss Black, and Ferrari Red. Quick and easy to assemble, this table is perfect for anyone looking for a high-quality, easy-to-use turntable that delivers an outstanding listening experience. Don't wait, get your hands on the Music Hall MMF-2.3 turntable today and take your vinyl listening to the next level. Feature List:special vibration damping adjustable feettop tier 8.6” carbon fiber tonearm with aluminum headshellfully adjustable VTA, azimuth, and dampened arm lift mechanismtonearm features a 4-point gimbal bearing assembly using ultra-precision ABEC bearingslow noise fully manual belt-drive designseparately isolated DC synchronous motor for superior speed stabilitytwo-speed stepped motor pulley for 33 1⁄3 and 45rpmmusic hall Spirit moving-magnet cartridge with replaceable elliptical stylusthe cartridge supplied is properly aligned and mountedhigh precision stainless steel and bronze bearing assembly for quiet, fluid operationhigh quality gold RCA connectors with detachable phono cablefull-size alloy platter and felt matexcellent instruction manualquick and easy to assembledust cover and 45rpm adaptor

Meet the Music Hall MMF-2.3 turntable, the perfect mix of beauty and precision. With a top tier 8.6” carbon fiber tonearm and vibration damping adjustable feet, the MMF-2.3 is an excellent choice for any music lover. This table boasts a low noise fully manual belt-drive design, a separately isolated DC synchronous motor, and two-speed stepped motor pulley for 33 1⁄3 and 45 rpm. The included music hall Spirit moving-magnet cartridge with replaceable elliptical stylus has been properly aligned and mounted for superior sound.Constructed with high-quality components, the MMF-2.3 focuses on the critical components: bearing, motor, and tonearm, for quiet, fluid operation. The high precision stainless steel and bronze bearing assembly ensures accurate speed and stability, while the full-size alloy platter and felt mat deliver optimal sound. The tonearm is fully adjustable for VTA and azimuth, with a 4-point gimbal bearing assembly using ultra-precision ABEC bearings. The MMF-2.3 even includes detachable phono cables and a dust cover.Not only does the MMF-2.3 turntable offer amazing performance, but it also comes in three stunning finishes: Gloss White, Gloss Black, and Ferrari Red. Quick and easy to assemble, this table is perfect for anyone looking for a high-quality, easy-to-use turntable that delivers an outstanding listening experience. Don't wait, get your hands on the Music Hall MMF-2.3 turntable today and take your vinyl listening to the next level. Feature List:special vibration damping adjustable feettop tier 8.6” carbon fiber tonearm with aluminum headshellfully adjustable VTA, azimuth, and dampened arm lift mechanismtonearm features a 4-point gimbal bearing assembly using ultra-precision ABEC bearingslow noise fully manual belt-drive designseparately isolated DC synchronous motor for superior speed stabilitytwo-speed stepped motor pulley for 33 1⁄3 and 45rpmmusic hall Spirit moving-magnet cartridge with replaceable elliptical stylusthe cartridge supplied is properly aligned and mountedhigh precision stainless steel and bronze bearing assembly for quiet, fluid operationhigh quality gold RCA connectors with detachable phono cablefull-size alloy platter and felt matexcellent instruction manualquick and easy to assembledust cover and 45rpm adaptor

Meet the Music Hall MMF-2.3 turntable, the perfect mix of beauty and precision. With a top tier 8.6” carbon fiber tonearm and vibration damping adjustable feet, the MMF-2.3 is an excellent choice for any music lover. This table boasts a low noise fully manual belt-drive design, a separately isolated DC synchronous motor, and two-speed stepped motor pulley for 33 1⁄3 and 45 rpm. The included music hall Spirit moving-magnet cartridge with replaceable elliptical stylus has been properly aligned and mounted for superior sound.Constructed with high-quality components, the MMF-2.3 focuses on the critical components: bearing, motor, and tonearm, for quiet, fluid operation. The high precision stainless steel and bronze bearing assembly ensures accurate speed and stability, while the full-size alloy platter and felt mat deliver optimal sound. The tonearm is fully adjustable for VTA and azimuth, with a 4-point gimbal bearing assembly using ultra-precision ABEC bearings. The MMF-2.3 even includes detachable phono cables and a dust cover.Not only does the MMF-2.3 turntable offer amazing performance, but it also comes in three stunning finishes: Gloss White, Gloss Black, and Ferrari Red. Quick and easy to assemble, this table is perfect for anyone looking for a high-quality, easy-to-use turntable that delivers an outstanding listening experience. Don't wait, get your hands on the Music Hall MMF-2.3 turntable today and take your vinyl listening to the next level. Feature List:special vibration damping adjustable feettop tier 8.6” carbon fiber tonearm with aluminum headshellfully adjustable VTA, azimuth, and dampened arm lift mechanismtonearm features a 4-point gimbal bearing assembly using ultra-precision ABEC bearingslow noise fully manual belt-drive designseparately isolated DC synchronous motor for superior speed stabilitytwo-speed stepped motor pulley for 33 1⁄3 and 45rpmmusic hall Spirit moving-magnet cartridge with replaceable elliptical stylusthe cartridge supplied is properly aligned and mountedhigh precision stainless steel and bronze bearing assembly for quiet, fluid operationhigh quality gold RCA connectors with detachable phono cablefull-size alloy platter and felt matexcellent instruction manualquick and easy to assembledust cover and 45rpm adaptor

The Music Hall MMF-1.5 turntable is a beautifully refined piece that sets your world to groove and your feet to dance. Its superior S-shaped alloy tonearm, top-quality Music Hall Melody cartridge, and 3-speed belt drive design deliver exceptional sound quality, while the built-in phono preamp allows you to connect directly to your current system. The included hinged dust cover keeps your MMF-1.5 protected when not in use. With a built-in speed control circuit, the MMF-1.5 ensures the accuracy of its 3 speeds, providing you with an immersive listening experience from start to finish.Feature List:gorgeous real cherry wood veneerbuilt-in phono pre-amplifier which is by-passable if plugging into an existing phono pre-ampS-shaped aluminum tonearm, 9″removable headshell for easy cartridge changinglow noise belt-drive designstiff and solid MDF plinthseparately isolated DC synchronous motor for superior speed stabilitythree-speed motor provides 33⅓, 45, and 78rpmproperly aligned and mounted Music Hall Melody moving magnet cartridgeadjustable electronic speed controlspecial vibration damping feethigh quality gold RCA connectors with detachable phono cable includedfull-size aluminum platter and special vibration damping platter matworldwide compatibilityexcellent instruction manualdust cover and 45rpm adaptorquick and easy to assemble

The Music Hall MMF-1.3 Turntable is the perfect choice for audiophiles looking for an affordable and high-quality turntable. With a built-in phono preamplifier and pre-mounted cartridge, you can start listening to your favorite records right out of the box. The simplified construction of the MMF-1.3 allows for unrivaled focus on the critical components, resulting in exceptional sound quality. The 3-speed belt driven turntable comes complete with a hinged dust cover and a precision-aligned Audio-Technica cartridge. Plus, the built-in speed control circuit ensures the accuracy of the MMF-1.3’s speeds. Upgrade your vinyl listening experience with the Music Hall MMF-1.3 Turntable today!Feature List:belt driveelectronic speed controlled motor33 1⁄3, 45, and 78rpmaluminum tonearm with removable headshellpiano black MDF plinthvibration-damping rubber platter matAudio Technica AT3600L cartridgealuminum platterdust coverbuilt-in phono pre-ampremovable RCA cablesvibration damping feet

The US-1 turntable from Music Hall is the perfect choice for anyone who wants to enjoy the warm and rich sound of vinyl records. It's easy to set up and comes with everything you need to start playing your favorite albums in no time. This turntable has a sleek and stylish high gloss black finish, and comes with a built-in phono preamp, cartridge, dust cover, and all necessary cables and software. With a quiet belt drive and static balanced S-shaped tonearm, you can enjoy a smooth and stable performance with minimal noise and distortion. Whether you're a longtime vinyl enthusiast or just getting started, the US-1 turntable is a convenient, user-friendly, and affordable choice that will bring new life to your music collection.Feature List:extremely quiet belt drive, 2-speed turntablealuminum die-cast platter33 1⁄3 and 45rpmbuilt-in phono amp or direct line outstatic balanced S-shaped tonearm w/detachable headshellAudio Technica AT3600L moving-magnet cartridge suppliedanti-skating control for increased stereo balance+/- 10% adjustable pitch controldust cover includeddesigned and developed in the US and Francew17.7 x d13.8 x h5.7in12lbs (package) 5.5kg

The Music Hall Classic turntable is a modern take on a classic design, inspired by turntables of the past and built with the best of today's technology. This 2-speed belt-driven turntable comes complete with a tonearm, mounted Music Hall Spirit cartridge, and built-in phono preamp, delivering exceptional sound quality with precision-aligned speed control. With adjustable vibration-damping feet and semi-automatic operation, the Classic is both easy to use and stylish, featuring a dark walnut wood veneer finish that complements any room. The built-in phono preamp also allows for easy connection to your existing system, making the Classic the perfect choice for anyone looking for an affordable yet high-quality turntable.Feature List:semi-automatic (auto lift & shut off)factory mounted music hall spirit cartridge included aluminum platter with felt matremovable head shelladjustable vibration damping feettouch sensitive electronic speed control 33/45 rpmbuilt-in by-passable phono ampunique uni-pivot tonearm designaccurate line for perfect counterweight positiondust cover

With over 25 years of experience in the DJ and pro audio industry, Reloop is one of the market leaders for DJ, HiFi turntables and accessories. Especially developed for music lovers and sound purists, Reloop presents the HiFi turntable TURN 3 MK2.Quiet DC driveThe heart of the TURN 3 MK2 is a synchronous belt drive, powered by a low-vibration DC motor - motor noises are thus hardly perceptible.Revised tonearm constructionThe redesigned tonearm, especially developed for the TURN 3 MK2, offers a remarkably good tracking performance for an outstanding sound experience. Headshell connectionThe headshell connection is equipped with a GM/SME mechanism. This allows the preferred headshells and systems to be individually mounted on the tonearm.Electronic speed control for 33, 45 & 78 rpmThe TURN 3 MK2 eliminates the need to change the drive belt. Depending on the choice of record, the desired speed can be conveniently set to 33, 45 or 78 RPM with the large speed control knob. Even shellac records can be played back when using a suitable pick-up system.Semi-automatic stopWith the integrated semi-automatic control, the TURN 3 MK2 automatically stops at the end of a record. In addition, it is possible to deactivate the semi-automatic control in order to control the playback manually.USB recording functionThe integrated USB interface allows you to digitise your favourite records directly on PC/MAC in CD quality. Ideal for listening on the go or for archiving your cherished vinyl collection.High-end pre-amplifierEquipped with a high-end pre-amp, the Reloop TURN 3 MK2 can be easily and directly connected to an amplifier, even without a phono input. A separate pre-amplifier is thus not absolutely necessary.Precision-manufactured die-cast aluminium turntable The turntable of the TURN 3 MK2 is made of a heavy aluminium die-cast construction, which provides a solid and consistent rotational performance. The heavy and precise fabrication also adds additional mass, helping to eliminate unwanted resonances for the best possible acoustic results.Anti-skating wheelThe anti-skating adjustment of the tonearm can be conveniently set via a special wheel for perfect tracking adjustment.Gold-plated connectionsThe gold-plated connections guarantee purest signal transmission and ensure maximum flexibility, all cables are detachable.Shock-absorbing feetDecoupled, shock-absorbing feet help to prevent any unwanted vibrations and guarantee a clean audio signal. Solid base with piano finishThe sturdy and solid MDF base, covered with a fine piano finish, ensures a detailed and warm sound image. Immediate listening pleasure with hi-tech Ortofon cartridgeThe TURN 3 MK2 is equipped with a pre-assembled, high-quality Ortofon 2M Red pick-up system.The Reloop TURN 3 MK2's improved construction and carefully selected components deliver exquisite sound characteristics at an extraordinary price that surprises and delights audiophiles in equal measure!

The McIntosh MT2 Precision Turntable combines the latest in turntable technology and design to deliver both superb performance and accurate playback. The MT2 is a great way to upgrade your home audio system to play vinyl albums. A full complement of features allows for all recordings to be reproduced with flawless realism. Its advanced electronic and mechanical design will give you many years of smooth, trouble-free operation. A subtle green glow emanates from under the platter and the outside edges of the plinth for a touch of refined ambiance.The MT2 plays both 33-1/3 and 45 rpm records. It’s virtually ready to use out of the box with just a few setup steps to complete and then you’ll be enjoying your vinyl in no time.Sumiko Moonstone phono cartridge installed on the MT2 Precision Turntable.The MT2 comes with a Sumiko Moonstone cartridge, a next-gen moving magnet phono pickup. The Moonstone phono cartridge is dressed to impress. It has low moving-mass and output, and is topped off with their listen-tested 0.3 x 0.7 mil elliptical diamond. Moonstone transcribes sonic imagery with weight, richness, depth, and keenly realistic texture. The sonic image is suspended and well-controlled over a nearly-absent noise floor, providing fantastic clarity without etch nor confusion.The tonearm is constructed from dural-aluminum with special damping materials and is light weight yet highly rigid. The noise free vertical bearings feature two precision ceramic surfaces with damping fluid; the horizontal bearing is a gimballed sapphire design.The belt driven, solid black outer platter is made from a special dynamically balanced polyoxymethylene (POM) and is over 1” thick. This heftiness helps to both resist and absorb external vibrations that can cause noise during playback; its large mass also provides the perfect flywheel action for stable playback speed. The inner platter is made of CNC-precision milled aluminum. The platters rotate on a polished and tempered steel shaft in a sintered bronze bushing.The DC motor is driven by an external voltage-stabilized power supply and is completely decoupled from the chassis, isolating your records from any mechanical interference. Its sturdy plinth has a resonance optimized and highly compressed wood base with black lacquer finish, while the top and middle acrylic plates help absorb unwanted vibrations.A clear, contoured dust cover is included. The MT2 turntable is compatible with a variety of McIntosh phono preamplifiers, stereo preamplifiers, integrated amplifiers and home theater processors with phono inputs; virtually any of our amplifiers and speakers can be used to complete your audio system"McIntosh uses the word ‘precision’ in its description of this deck - we’d add rock-solid. It laid open a classic rock mix with a combination of solidity to the bass elements and precision to the highs in a sound which was often too enjoyable to analyse; LPs came and went with very few review notes going down on paper, such was our distraction by the MT2’s presentation." - Sound+ImageA "well built, great sounding record player" that's "made for people who love vinyl... rich sound, solid bass and comfortable sound balance." - Lyd & Bilde

The TecnoDec is our entry level turntable and it shares many features developed for its bigger brother the GyroDec. Such as a vibration dampening impedance matched platter, inverted oil circulating main bearing and a free standing motor unit. The TecnoDec is an unsuspended turntable that utilises technologies and materials only found in much more expensive turntables, to perform well above its price point. FEATURESPure Sorbothane feet inserts: These isolate the turntable from the supporting surface.Inverted oil circulating main bearing: Contrary to traditional designs, our main bearing has the point of rotation at the top of the assembly, not at the bottom. This orientation allows us to fully lubricate the inside of the entire bearing while the platter is turning. We achieve this by way of a modified Archimedean screw that we machine into the inside bore of the bearing. The oil is drawn from a reservoir at the base of the main bearing up to the thrust ball at the top, fully lubricating as it goes, it then returns to the reservoir via a waste hole drilled into the bearing spindle. Lubricating the precision parts of the main bearing in this way means that any potential for noise or vibration created by the rotation of the platter is avoided.Impedance-matched platter: The platter material was chosen for its vibration dampening characteristics and because sonically it is a very similar material to vinyl, so it has a very neutral sound characteristic.Free standing motor unit: The motor unit used to drive the turntable is completely separate to the turntable, meaning it doesn’t touch the turntable in anyway. The only connection between the motor and the turntable is the drive belt that drives the platter. This stops any noise or vibrations created when the motor is running, getting through to the sensitive parts of the turntable.

The single speed RP78 has been designed and engineered to achieve outstanding performance way beyond the expectations of a product at this price point. Using our latest 24 V motor technology the new Planar 78 is also fitted with the latest RB220 precision tonearm.For the Love of 78 RPM RecordsDesigned solely for the reproduction of 78 rpm records, we have omitted any unnecessary gimmicks allowing us to concentrate the manufacturing costs on the high quality parts necessary to reproduce records accurately. The minimalist design of the Rega Planar 78 and the use of extremely high quality components ensure that your turntable should last for many years.The RB220 offers astonishing performance and is one of Rega’s best selling tonearms. An evolution of the famous RB250, which was supplied as standard on early Planar 2 and P2 turntable, the RB220 uses our patent pending ultra lightweight high quality polymer bearing selected, high quality vertical and horizontal bearings.The tonearm uses our die-cast tube and the three point fixing technique based on the mounting design system. This system reduces stress on the plinth and tonearm and offers greater stability though the arm. All of which translates into more music for you the listener.

Professional direct drive turntableA reborn classicThe PLX-1000 is precision engineered for the booth, drawing on 50 years’ experience of making high-end turntables. The result is a familiar layout with some next generation improvements, including a high-torque direct drive system, multi-pitch control, club-grade build and sound quality, and detachable power and audio cables.Turn the tablesThe high-torque direct drive ensures stable rotation and exceptional control – and it reaches 33⅓ rpm in just 0.3 seconds thanks to a starting torque of 4.5kg/cm (or more).Excellent sound designThe PLX-1000’s heavy-mass, die-cast zinc chassis prevents resonance and vibrations. The lower part of the unit is reinforced with 8mm-thick resin, plus 9mm-thick, vibration-damping material at the base. Plus the rubber-insulated tone arm reduces howling effects, while rubber and springs on the dampening parts of the insulator absorb external vibrations.Pick up the paceMulti-tempo control lets you instantly pick up or slow down the track to ±8%, ±16% and ±50%, while a simple reset button instantly reverts to ±0%.Flexible connectivityInterchangeable power and audio cables can be easily connected and replaced, and pro-grade gold-plated RCA jacks ensure low impedance and an amazing sound quality.

Direct Drive Turntable System SL-1500C The Latest Coreless Direct Drive Motor Achieves High-precision Stable Rotation The technologies acquired through the development of the SL-1200 Series and the high-end SL-1000R model were lavishly inserted into the motor drive unit, a key part of the turntable. The motor exclusively tunes the single-rotor, coreless direct drive motor adopted by the SL-1200GR in order to read the high rotation accuracy and high-precision signals of the record. Optimal motor control is conducted for the inertial mass of the two-layer structure platter on which the vinyl record is placed with deadening rubber on the entire back surface to eliminate unwanted resonance in the aluminium die-cast platter to eliminate the rotation irregularity called cogging. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fiber to achieve a two-layer construction. The insulator is comprised of a spring and rubber to provide optimal vibration-damping characteristics. The tonearm is a static-balance universal S-shape tonearm, another Technics tradition. By adopting a high-precision bearing using the same gimbal suspension construction and machined housing as the SL-1200 Series, high initial sensitivity is achieved. In addition, reliability has been improved by incorporating a removable power cable and gold-plated terminals, which have less sound quality degradation, for the PHONO and LINE terminals. Complete Turntable with a Built-in Phono Equalizer and Cartridge Complete Turntable with a Built-in Phono Equalizer and Cartridge In order to enjoy playing analogue records more comfortably, the SL-1500C features a built-in phono equalizer and bundled cartridge. There is no need to separately prepare either one, making it easy to link with a wide range of audio equipment. The shield structure of the built-in phono equalizer suppresses the effects of external noise and noise from the power supply. It is also equipped with a switch to turn the LINE output off when it is not being used. The turntable has been designed to thoroughly shut-out adverse effects to the PHONO output. The dedicated power supply for the PHONO output terminal is isolated from the power supply for the LINE output terminal, and has been designed to prioritize sound quality by minimising the wiring of the PHONO signal. The isolated terminals also prevent wiring mistakes. An Ortofon 2M RED cartridge, which is highly acclaimed as an MM cartridge, has been selected for the bundled cartridge. Combining this high-quality cartridge with the performance of the SL-1500C will maximise the sound quality of vinyl records. Equipped with an Auto Lifter Function That Allows You to Enjoy Playing Records More Comfortably When the tonearm reaches the end of the record, the Auto Lifter function automatically raises the cartridge. This prevents unnecessary wear on your valuable vinyl records and stylus. By embedding the Auto Lifter function in the base portion of the tonearm, it eliminates impacts to the tonearm. Due to a simple design that doesn’t use motor power, there is no electrical or vibrational impact and it will not prevent the movement of the tonearm. In response to requests from many users regarding the Auto Lifter function, a design that prioritises sound quality was adopted. The functions required to playback records were kept to a bare minimum, achieving simple and easy-to-use operability. Simple Design with Functional Beauty The SL-1500C sports a simple design without unnecessary frills, while retaining the superb operating feel that is a Technics tradition. The attractive appearance lets you enjoy playing records to your heart’s content.　

Direct Drive Turntable System SL-1500C The Latest Coreless Direct Drive Motor Achieves High-precision Stable Rotation The technologies acquired through the development of the SL-1200 Series and the high-end SL-1000R model were lavishly inserted into the motor drive unit, a key part of the turntable. The motor exclusively tunes the single-rotor, coreless direct drive motor adopted by the SL-1200GR in order to read the high rotation accuracy and high-precision signals of the record. Optimal motor control is conducted for the inertial mass of the two-layer structure platter on which the vinyl record is placed with deadening rubber on the entire back surface to eliminate unwanted resonance in the aluminium die-cast platter to eliminate the rotation irregularity called cogging. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fiber to achieve a two-layer construction. The insulator is comprised of a spring and rubber to provide optimal vibration-damping characteristics. The tonearm is a static-balance universal S-shape tonearm, another Technics tradition. By adopting a high-precision bearing using the same gimbal suspension construction and machined housing as the SL-1200 Series, high initial sensitivity is achieved. In addition, reliability has been improved by incorporating a removable power cable and gold-plated terminals, which have less sound quality degradation, for the PHONO and LINE terminals. Complete Turntable with a Built-in Phono Equalizer and Cartridge Complete Turntable with a Built-in Phono Equalizer and Cartridge In order to enjoy playing analogue records more comfortably, the SL-1500C features a built-in phono equalizer and bundled cartridge. There is no need to separately prepare either one, making it easy to link with a wide range of audio equipment. The shield structure of the built-in phono equalizer suppresses the effects of external noise and noise from the power supply. It is also equipped with a switch to turn the LINE output off when it is not being used. The turntable has been designed to thoroughly shut-out adverse effects to the PHONO output. The dedicated power supply for the PHONO output terminal is isolated from the power supply for the LINE output terminal, and has been designed to prioritize sound quality by minimising the wiring of the PHONO signal. The isolated terminals also prevent wiring mistakes. An Ortofon 2M RED cartridge, which is highly acclaimed as an MM cartridge, has been selected for the bundled cartridge. Combining this high-quality cartridge with the performance of the SL-1500C will maximise the sound quality of vinyl records. Equipped with an Auto Lifter Function That Allows You to Enjoy Playing Records More Comfortably When the tonearm reaches the end of the record, the Auto Lifter function automatically raises the cartridge. This prevents unnecessary wear on your valuable vinyl records and stylus. By embedding the Auto Lifter function in the base portion of the tonearm, it eliminates impacts to the tonearm. Due to a simple design that doesn’t use motor power, there is no electrical or vibrational impact and it will not prevent the movement of the tonearm. In response to requests from many users regarding the Auto Lifter function, a design that prioritises sound quality was adopted. The functions required to playback records were kept to a bare minimum, achieving simple and easy-to-use operability. Simple Design with Functional Beauty The SL-1500C sports a simple design without unnecessary frills, while retaining the superb operating feel that is a Technics tradition. The attractive appearance lets you enjoy playing records to your heart’s content.　

Fully Automatic Hifi-Turntable The fully automatic function of the CS 429 provides maximum ease of use. The tonearm automatically lifts, shifts across and drops with the push of a button. Simply place the vinyl record on the platter and push the start button. The CS 429 has a fully adjustable tonearm. This provides the option to change the pickup in the future and to alter the trackingforce and anti-scating accordingly. The internal rubber damping construction decouples the tonearm and platter from external vibrations. This very quiet platform pro-vides an excellent sound performance combined with precise, optical speed control.

Coreless Direct Drive Motor The motor that forms the heart of the direct drive turntable is based on the coreless direct drive motor that was developed for the SL-1200G launched in 2016, and further improved. The double coil twin rotor-type coreless direct drive motor that was newly developed for this purpose had coils on both sides for 12-pole, 18-coil drive, with high enough torque to drive the heavyweight-class platter (approximately 7.9-kg). Offsetting the coils on both sides 60 degrees improved the rigidity of the substrate, suppressing fine vibrations and reducing self-inductance. These improvements achieved stable rotation of 0.015% wow and flutter or less, which is considered to be the measurement limit. Also, the thrust bearings supporting the heavyweight-class platter use a special engineering plastic to provide both high rigidity and reliability. Suppressing Unwanted Motor Vibration The motor that was developed for the SL-1200G served as the platform for the direct drive motor. The double coil, reinforced thrust bearings, and a chassis with increased rigidity achieved a stabilised motor with low centre of gravity. By positioning two stainless steel weights with high rigidity and high specific gravity at the bottom of the chassis, the rigidity and low centre of gravity are maintained. These thorough measures to prevent unwanted vibration help to achieve overwhelming rotary precision and improve S/N. Heavyweight-class Turntable Platter The turntable platter positions tungsten weights, which have an extremely high specific weight and are difficult to process, on the outer periphery of a 10-mm-thick brass weight. The brass weight is laminated onto the aluminium die-cast, giving the platter a total weight of approximately 7.9 kg and an inertial mass of approximately 1 ton·cm. A deadening rubber for eliminating unwanted vibration is also attached to the rear surface to form a 3-layer construction and achieve high rigidity and excellent vibration damping characteristics. Separate Control Unit The control unit is separated from the main unit to suppress the effects of unwanted noise on the main unit. In order to achieve a power supply circuit that provides good regulation for high torque, a switching power supply is used. To reduce the noise reaching the pickup, the switching power supply is equipped with a unique technology that provides a voltage supply with minimal noise by a newly developed "unwanted noise reduction circuit". Also, to minimise the noise even during communication, a highly reliable system that resists the effects of external noise is used for communication between the main unit and the control unit. These thorough noise-reduction measures achieve the world's highest-level S/N. Minute Adjustment and Indication of Rotations This turntable supports not only LP (33 1/3 rpm) and EP (45 rpm) analogue records, but also SP (78 rpm). Rotation (rpm) can also be set down to two decimal places (maximum ±16%) from the control unit. The OLED display is also capable of displaying rotation with accuracy down to two decimal places, so the user can both hear and see extremely precise rotation. SP-10MK2 and SP-10MK3 Compatibility In order to enable users to continue using the turntable base and tonearm of systems including the SP-10MK2 and SP-10MK3, the shape and screw positions of the SP-10R base plate are designed to allow mounting onto the SP-10MK2 and SP-10MK3 for complete backward compatibility. The control unit is also the same shape and size as the SP-10MK2 power unit for trouble-free replacement.

Coreless Direct Drive Motor Achieving Stable Rotation The direct drive system uses a slow-turning motor to directly drive the platter. This system has various advantages. It offers high performance, such as rotation accuracy and powerful torque, does not require replacement of parts and maintains high reliability over a long period of time. On the other hand, the direct drive system was said to produce a rotation irregularity called cogging. For the SL-1200MK7, a new coreless direct drive motor was developed. This motor employs a coreless stator. The removal of the core (iron core) from the stator eliminated the root cause of cogging. Furthermore, the magnetic force of the rotor magnets was improved to the highest possible level, and the gap between the coreless stator and rotor magnets was optimised, thus achieving high-torque-performance equaling that of the SL-1200MK5. Boasting smooth rotation and powerful torque, this motor reproduces sound accurately and faithfully from the groove on an analogue record. Diverse New Functions Adapt to Various Playing Styles Torque / Brake Speed Adjustment The newest digital motor control technology, accumulated through the development of Blu-ray disc products, is applied to improve adjustment by allowing the torque and brake speed to be adjusted individually in four steps. The Pitch Control Function The pitch control function allows fine adjustment of the rotation speed within ±8 % / ±16 %. It does this through digital control, from positional detection of the slider to rotational control of the motor, eliminating the unnecessary DA conversion. This greatly improves tracking performance to achieve accurate and stable pitch adjustment. Reverse Play Function The reverse play function, which brings forth new possibilities of creative performance, makes its first appearance in the SL-1200 Series. In addition to 33-1/3 rpm and 45 rpm, a rotation speed of 78 rpm is supported. *The torque / brake speed adjustment, rotation speed switch, and reverse play can be adjusted by switches on the main unit. High Sensitive Tonearm The tonearm, which has continued to support the leading edge of the DJ scene for many years, inherits the highly reliable static-balance universal S-shape tonearm. Using high-precision bearings, it achieves a higher initial-motion sensitivity than the SL-1200MK6. This accurately tracks the groove on the phonorecord to assure excellent tracking performance with minimum stylus jumping even in harsh playing conditions such as scratching. Stylus Illuminator Featuring a High-brightness and Long-life White LED The stylus illuminator features a new push-type structure for intuitive operation, and employs a high-brightness and long-life white LED. The illumination area and intensity were reviewed to provide improved visibility of the stylus tip even in a dark environment. Power / Phono Cable Terminals The power and phono cable terminals allow detachment of the cables. The phono terminals are gold-plated to minimise sound quality degradation. Since the terminals allow disconnection of the cables, maintenance of the cables is easier. High-rigidity Cabinet and High-damping Insulator The chassis, an essential part for reducing external vibrations, inherits the audio quality enhancement technology fostered through the development of high-end turntables. The aluminium die-cast chassis is rigidly integrated with a special material consisting of ABS mixed with glass fibre to achieve a two-layer construction. The combination of this special high-rigidity material and a metal chassis raised the rigidity and vibration-damping performance to higher levels, realising a robust cabinet for beautiful sound reproduction. The insulator is comprised of a spring and rubber to provide optimal frequency characteristics. This not only assures high sound quality and superb howling resistance, but also effectively shuts out external vibrations under high sound level conditions.

The Elipson Chroma 400 RIAA is a belt-driven manual turntable with an elegant design offering a satin wood finish. Benefiting from our latest technologies, it can be connected directly to any amplifier or active speaker. Assembled in France in our premises, the Elipson Chroma 400 RIAA offers the characteristics that contributed to the success of the Omega models such as the OTT (Orbital Torsion Tonearm) tonearm in carbon, its digital processing system of the motor rotation. It is distinguished by a new axis system for an even more precise rotation, an improved drive motor with optimized damping, a graduated counterweight, as well as by the addition of a cue control lever for your comfort of use. Its integrated Phono-RIAA circuity offers all the features of more expensive separate components with a choice of moving magnet and moving coil cartridge as well as a very high and faithful resolution of vinyl record signals.

The Elipson Chroma 400 RIAA BT is a belt-driven manual turntable with an elegant design offering a satin wood finish. Benefiting from our latest technologies, it can be connected directly to any amplifier, active speaker using RCA cable or in Bluetooth mode (aptX HD) with no loss of signal quality. Assembled in France in our premises, the Elipson Chroma 400 RIAA BT offers the characteristics that contributed to the success of the Omega models such as the OTT (Orbital Torsion Tonearm) tonearm in carbon, its digital processing system of the motor rotation. It is distinguished by a new axis system for an even more precise rotation, an improved drive motor with optimized damping, a graduated counterweight, as well as by the addition of a cue control lever for your comfort of use Its integrated Phono-RIAA circuity offers all the features of more expensive separate components with a choice of moving magnet and moving coil cartridge as well as a very high and faithful resolution of vinyl record signals. It also offers a Bluetooth connection in high resolution 24 bits to enjoy any connected speaker and a USB type B port to digitize your vinyl records.

The Elipson Chroma 400 RIAA is a belt-driven manual turntable with an elegant design offering a satin wood finish. Benefiting from our latest technologies, it can be connected directly to any amplifier or active speaker. Assembled in France in our premises, the Elipson Chroma 400 RIAA offers the characteristics that contributed to the success of the Omega models such as the OTT (Orbital Torsion Tonearm) tonearm in carbon, its digital processing system of the motor rotation. It is distinguished by a new axis system for an even more precise rotation, an improved drive motor with optimized damping, a graduated counterweight, as well as by the addition of a cue control lever for your comfort of use. Its integrated Phono-RIAA circuity offers all the features of more expensive separate components with a choice of moving magnet and moving coil cartridge as well as a very high and faithful resolution of vinyl record signals.

The Elipson Chroma 400 RIAA BT is a belt-driven manual turntable with an elegant design offering a satin wood finish. Benefiting from our latest technologies, it can be connected directly to any amplifier, active speaker using RCA cable or in Bluetooth mode (aptX HD) with no loss of signal quality. Assembled in France in our premises, the Elipson Chroma 400 RIAA BT offers the characteristics that contributed to the success of the Omega models such as the OTT (Orbital Torsion Tonearm) tonearm in carbon, its digital processing system of the motor rotation. It is distinguished by a new axis system for an even more precise rotation, an improved drive motor with optimized damping, a graduated counterweight, as well as by the addition of a cue control lever for your comfort of use Its integrated Phono-RIAA circuity offers all the features of more expensive separate components with a choice of moving magnet and moving coil cartridge as well as a very high and faithful resolution of vinyl record signals. It also offers a Bluetooth connection in high resolution 24 bits to enjoy any connected speaker and a USB type B port to digitize your vinyl records.

Manufactured in France, the Chroma 200 RIAA BT is a vinyl turntable with a satin black finish, incorporating an RIAA phono preamplifier and a Bluetooth APTX HD transmitter. It is equipped with an Ortofon OM10 cell, an aluminium arm with an arm lift for smooth handling. Gear selection (33/45/78 rpm) is automatic. It also benefits from a new digital drive motor, allowing a perfect rotation speed while being quieter. In 2014, Elipson launched the first Bluetooth vinyl turntable on the market, 100% made in France. 6 years later, Elipson offers a new, complete range, while keeping the strength of the initial design of its Vinyl turntable and the know-how of its French factory. Alpha, Omega and Omega Carbon make way for Chroma 200 and Chroma 400 and Chroma Carbon. Many improvements have been made to these three ranges : - arm lift on all models, - new quieter engine and evolution of its damping decoupling - new two-piece top for better flatness - optimisation of electronic cards - new finishes Each of the boards will be delivered with a mechanical balance for an optimal adjustment of the cell. Elipson is very proud to offer you all these improvements, without increasing the selling price of its decks.