Surround Speakers

Elipson Sound Tree red, up to 12 speakersThe Elipson Sound Tree is a unique creation in the world of high fidelity, born from the imagination of designers Maurizio Galante, Lancman Tal and Jean-Yves Le Porcher. It is composed of a subwoofer integrating the amplification - the trunk - and 12 spherical speakers to be suspended from the ceiling - the fruits - connected together by fabric-covered cables - the vines.The Elipson Sound Tree musical tree offers an extremely modular solution for broadcasting music in the most diverse locations. By varying the arrangement of the speakers, it adapts to all spaces, from the most intimate (living room, living room) to the largest (reception room, restaurant room, etc.). Presented for the first time at the Milan Triennale during Design Week, the Elipson Sound Tree musical tree is part of a desire to develop a collection of "Haute Couture" sound objects. The cabinet and speakers thus adopt a very beautiful lacquered finish, the speakers receiving a very beautiful aluminum speaker protection grille.The Elipson Sound Tree is a 3-way audio system, consisting of a subwoofer dedicated to low frequencies and 12 spherical speakers responsible for reproducing medium and high frequencies. The latter are equipped with a 10 cm coaxial speaker with a 20 mm tweeter positioned in its center. The whole is powered by an original Bang & Olufsen Ice Power amplification which combines a high power reserve and very good dynamic qualities.Unparalleled in the world of prestige audio, the Elipson Sound Tree is an astonishing and terribly seductive sound object.HighlightsInnovative designModularityNeat finishIce Power Amplification (B&O)

Nothing enhances your home cinema experience like a dedicated surround sound speaker. A compact, discreet design, yet able to pack in two MPD high-frequency transducers and two 4" (100 mm) mid/bass C-CAM drivers, Gold FX can be flush-mounted and can function in either bi-pole or di-pole modes at the flick of switch.Monitor Audio are masters of the effects speaker, and the Gold FX represents the state of the art.Key FeaturesDiscreet design with flush wall placement – recessed terminationsAngled baffles for optimal dispersionSealed cabinet – for accurate performance when installed in restricted voids or close to a wallSwitchable di-pole/ bi-pole configuration – handed pairsDual MPD high frequency transducer – articulate, extended high frequencies, yet supremely smoothDual 4" Bass/Mid-range drivers with C-CAM cone technologyPureflow silver-plated OFC copper internal cabling – highest quality transfer through the signal chainSingle-bolt-through driver technology – providing increased bracing strength, rigidity and driver/baffle de-couplingHigh-quality crossovers with premium-grade polypropylene film capacitors used throughoutBespoke magnetic grilles – clean visual styling, virtually acoustically transparentDedicated flexible bracket included for easy installation

Nothing enhances your home cinema experience like a dedicated surround sound speaker. A compact, discreet design, yet able to pack in two MPD high-frequency transducers and two 4" (100 mm) mid/bass C-CAM drivers, Gold FX can be flush-mounted and can function in either bi-pole or di-pole modes at the flick of switch.Monitor Audio are masters of the effects speaker, and the Gold FX represents the state of the art.Key FeaturesDiscreet design with flush wall placement – recessed terminationsAngled baffles for optimal dispersionSealed cabinet – for accurate performance when installed in restricted voids or close to a wallSwitchable di-pole/ bi-pole configuration – handed pairsDual MPD high frequency transducer – articulate, extended high frequencies, yet supremely smoothDual 4" Bass/Mid-range drivers with C-CAM cone technologyPureflow silver-plated OFC copper internal cabling – highest quality transfer through the signal chainSingle-bolt-through driver technology – providing increased bracing strength, rigidity and driver/baffle de-couplingHigh-quality crossovers with premium-grade polypropylene film capacitors used throughoutBespoke magnetic grilles – clean visual styling, virtually acoustically transparentDedicated flexible bracket included for easy installation

Nothing enhances your home cinema experience like a dedicated surround sound speaker. A compact, discreet design, yet able to pack in two MPD high-frequency transducers and two 4" (100 mm) mid/bass C-CAM drivers, Gold FX can be flush-mounted and can function in either bi-pole or di-pole modes at the flick of switch.Monitor Audio are masters of the effects speaker, and the Gold FX represents the state of the art.Key FeaturesDiscreet design with flush wall placement – recessed terminationsAngled baffles for optimal dispersionSealed cabinet – for accurate performance when installed in restricted voids or close to a wallSwitchable di-pole/ bi-pole configuration – handed pairsDual MPD high frequency transducer – articulate, extended high frequencies, yet supremely smoothDual 4" Bass/Mid-range drivers with C-CAM cone technologyPureflow silver-plated OFC copper internal cabling – highest quality transfer through the signal chainSingle-bolt-through driver technology – providing increased bracing strength, rigidity and driver/baffle de-couplingHigh-quality crossovers with premium-grade polypropylene film capacitors used throughoutBespoke magnetic grilles – clean visual styling, virtually acoustically transparentDedicated flexible bracket included for easy installation

Nothing enhances your home cinema experience like a dedicated surround sound speaker. A compact, discreet design, yet able to pack in two MPD high-frequency transducers and two 4" (100 mm) mid/bass C-CAM drivers, Gold FX can be flush-mounted and can function in either bi-pole or di-pole modes at the flick of switch.Monitor Audio are masters of the effects speaker, and the Gold FX represents the state of the art.Key FeaturesDiscreet design with flush wall placement – recessed terminationsAngled baffles for optimal dispersionSealed cabinet – for accurate performance when installed in restricted voids or close to a wallSwitchable di-pole/ bi-pole configuration – handed pairsDual MPD high frequency transducer – articulate, extended high frequencies, yet supremely smoothDual 4" Bass/Mid-range drivers with C-CAM cone technologyPureflow silver-plated OFC copper internal cabling – highest quality transfer through the signal chainSingle-bolt-through driver technology – providing increased bracing strength, rigidity and driver/baffle de-couplingHigh-quality crossovers with premium-grade polypropylene film capacitors used throughoutBespoke magnetic grilles – clean visual styling, virtually acoustically transparentDedicated flexible bracket included for easy installation

The DALI ALTECO C-1 is truly a multipurpose speaker in both design and function. DALI wanted to ensure that the ALTECO C-1 is usable as both a height speaker as well as a traditional stereo speaker.By designing the crossover for stereo use and by keeping a strict focus on DALI sound design principles, we have created a speaker that fulfills both criteria. It is the perfect fit for adding height information to a surround setup or taking the role as an out-of-the-way stereo speaker.The ALTECO C-1 delivers believable height information from Atmos, DTS-X and Auro-3D movies in surround setup - not only when “firing up” using the ceiling as a reflector, but also “firing down” from a position up under the ceiling.The ALTECO C-1 is able to achieve this even without special equalizing in order to enhance the effects from HRTF (Head Related Transfer Function) technology. A technology found in Atmos certified speakers.Instead the ALTECO C-1 relies only on the height processing done in the amplifier, when selected. Had we included non-linear HRTF equalizing in the ALTECO C1, it would have been impossible to use it as a versatile neutral speaker, limiting the use to only an up-firing type speaker.Designed the way it is the DALI ALTECO C-1 offers the best from several worlds giving you ultimate flexibility and multiple applications. DUAL SOUND MODEThe unique angular design combined with the dual sound mode enables this speaker to be used in a multitude of different scenarios. Choose 'UP' on the front baffle switch to beam the sound waves either straight out for a soft downwards angle, or by selecting 'DOWN', beaming the sound almost straight down for close position listening.UP-FIRINGThe angular design of this speaker makes it perfect for up-firing use. Combined with a surround receiver that has the ability to render height information (Dolby Atmos, DTS-X or Auro-3D), placing it on top of the front speakers, and even on top of the rear speakers will offer an excellent ceiling reflected rendering of height information in compatible movies and concerts.WOOD FIBRE CONESOur low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.SOFT DOME TWEETERThe dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2). Specifications :Product seriesALTECOFrequency Range (+/-3 dB) [Hz]74 - 25,000 HzSensitivity (2,83 V/1 m) [dB]83.0 dBNominal Impedance [ohms]6 ohmsMaximum SPL [dB]103 dBRecommended Amplifier Power [W]40 - 100 WattCrossover Frequency [Hz]2,100 HzCrossover Principle2-wayHigh frequency driver, Quantity1 x 21 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4.5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire (Spring loaded push button) Recommended PlacementOn-Wall On speaker Recommended Distance From Wall [cm]    1 - 100 cmDimensions (HxWxD) [mm]265 x 160 x 200Weight [kg]2.9 kgAccessories IncludedRubber Feet Manual 

The Reference Premiere RP-502S surround speakers deliver the highest performing and encompassing sound possible. No other brand can bring this theater-quality surround sound experience into your home like Klipsch.HYBRID TRACTRIX® HORN TECHNOLOGYKlipsch proprietary Tractrix® horn-loaded technology ensures high-frequency energy of the Reference Premiere surround sound speaker is aimed directly at the listener and reduces unwanted, artificial reverb caused by indirect sound bouncing off walls - meaning you experience the most clear, detailed, lifelike sound possible.CERAMETALLIC™ WOOFERSKlipsch Proprietary Cerametallic™ woofers are the Reference Premiere surround sound speaker's signature statement for both sound and aesthetics. This extremely light, rigid materials holds its shape while being able to deliver lower frequencies with maximum efficiency.

The Reference Premiere RP-502S surround speakers deliver the highest performing and encompassing sound possible. No other brand can bring this theater-quality surround sound experience into your home like Klipsch.HYBRID TRACTRIX® HORN TECHNOLOGYKlipsch proprietary Tractrix® horn-loaded technology ensures high-frequency energy of the Reference Premiere surround sound speaker is aimed directly at the listener and reduces unwanted, artificial reverb caused by indirect sound bouncing off walls - meaning you experience the most clear, detailed, lifelike sound possible.CERAMETALLIC™ WOOFERSKlipsch Proprietary Cerametallic™ woofers are the Reference Premiere surround sound speaker's signature statement for both sound and aesthetics. This extremely light, rigid materials holds its shape while being able to deliver lower frequencies with maximum efficiency.

With airy high-frequencies, expressive midrange and surprisingly extended bass, the OPTICON LCR MK2 is an on-wall speaker that delivers genuine stereo and surround sound hi-fi performance.A flexible stereo and multichannel speakerThe OPTICON LCR MK2 incorporates the best technologies from the MK2 series in a low-profile, wall-mounted enclosure. Serving as a left, centre or right-channel speaker – hence the name LCR – this multipurpose, wall-mounted surround speaker delivers genuine stereo and multichannel Hi-Fi performance with impressive high-frequencies, an expressive midrange and surprisingly extended bass.Reducing distortion with Soft Magnetic CompoundThe OPTICON LCR MK2 driver magnet system consists of a large ferrite ring magnet surrounding a pole-piece manufactured entirely of the unique DALI SMC (Soft Magnetic Compound) material. The use of SMC greatly reduces mechanical distortion caused by hysteresis and eddy currents, resulting in a drastic reduction in third-order distortion for extended listening pleasure, a relaxed midrange and a surprising amount of detailing.The master of wide dispersionOur signature hybrid tweeter module marries a 29 mm soft dome tweeter with a custom 17 x 45 mm ribbon element. Both drivers are mounted on a cast aluminium faceplate, which provides a solid platform for the drivers and incorporates dispersion control detailing for optimal delivery of the high frequencies for off-axis listening. Our hybrid tweeter offers the best of both worlds – the clarity, speed and dynamics of a dome tweeter with the very high-frequency detail and smooth finesse of a ribbon tweeter.Low loss, low distortion and low colourationThe 6½" bass driver has been designed according to our sound design principles of low loss, low distortion and low colouration. The ideal driver plays only what the amplifier supplies... nothing is added, nothing is taken away. Every component is carefully designed to contribute towards this goal, including the paper pulp and wood fibre cone, which ensures minimal break-up resonance for a high resolution midrange and precise, coherent bass.Ensuring the highest quality productsWith a 25 mm thick front baffle and extra internal bracing, the OPTICON LCR MK2 cabinet is extremely rigid and practically eliminates panel resonance. To ensure the best possible quality product, we manufacture and test OPTICON MK2 series speakers at our production facilities in central Denmark, carrying out everything from cutting and routing of the wood laminate panels to installing the drivers and crossover.

With airy high-frequencies, expressive midrange and surprisingly extended bass, the OPTICON LCR MK2 is an on-wall speaker that delivers genuine stereo and surround sound hi-fi performance.A flexible stereo and multichannel speakerThe OPTICON LCR MK2 incorporates the best technologies from the MK2 series in a low-profile, wall-mounted enclosure. Serving as a left, centre or right-channel speaker – hence the name LCR – this multipurpose, wall-mounted surround speaker delivers genuine stereo and multichannel Hi-Fi performance with impressive high-frequencies, an expressive midrange and surprisingly extended bass.Reducing distortion with Soft Magnetic CompoundThe OPTICON LCR MK2 driver magnet system consists of a large ferrite ring magnet surrounding a pole-piece manufactured entirely of the unique DALI SMC (Soft Magnetic Compound) material. The use of SMC greatly reduces mechanical distortion caused by hysteresis and eddy currents, resulting in a drastic reduction in third-order distortion for extended listening pleasure, a relaxed midrange and a surprising amount of detailing.The master of wide dispersionOur signature hybrid tweeter module marries a 29 mm soft dome tweeter with a custom 17 x 45 mm ribbon element. Both drivers are mounted on a cast aluminium faceplate, which provides a solid platform for the drivers and incorporates dispersion control detailing for optimal delivery of the high frequencies for off-axis listening. Our hybrid tweeter offers the best of both worlds – the clarity, speed and dynamics of a dome tweeter with the very high-frequency detail and smooth finesse of a ribbon tweeter.Low loss, low distortion and low colourationThe 6½" bass driver has been designed according to our sound design principles of low loss, low distortion and low colouration. The ideal driver plays only what the amplifier supplies... nothing is added, nothing is taken away. Every component is carefully designed to contribute towards this goal, including the paper pulp and wood fibre cone, which ensures minimal break-up resonance for a high resolution midrange and precise, coherent bass.Ensuring the highest quality productsWith a 25 mm thick front baffle and extra internal bracing, the OPTICON LCR MK2 cabinet is extremely rigid and practically eliminates panel resonance. To ensure the best possible quality product, we manufacture and test OPTICON MK2 series speakers at our production facilities in central Denmark, carrying out everything from cutting and routing of the wood laminate panels to installing the drivers and crossover.

Theva Surround is the wall-mount speaker from the Theva range. It completes your Home Cinema system and can be easily installed in different spots to enjoy total sound immersion. Boasting a TNF tweeter and a Slatefiber cone speaker driver – both exclusive Focal technologies –, it spatialises every listening session for an uncompromising sound experience. Made in France, Theva Surround has a design with delicate, refined details. With a black finish, metallic rings, magnetic grille and rear vent positioning, every single detail is highly refined. It is the perfect partner for the Theva N°1, Theva N°2, Theva N°3, Theva N°3-D and Theva Center loudspeakers, and the SUB 600P subwoofer, creating a sensational Home Cinema system.

DescriptionWhere versatility and discretion are concerned, M-1 has them in abundance. It’s equally suited to multi-channel or stereo sound, is an outstanding listen with or without a subwoofer, and comes complete with wall-bracket and table stand.'Anywhere' is the perfect positionM-1 is equally at home on a shelf or a wall, thanks to its swiveling multi-position foot, or its bespoke stand will bring it up to the perfect listening height. No matter where you position it, though, its sound will draw your attention.Coloured to blend in or stand outWith a choice of matte black or matte white finishes for both the cabinet and the perforated steel grille , M-1 is ready to blend into the background or make a bold statement — the choice is yours. Either way, it makes a sophisticated statement.Because your theatre is also your homeJudicious industrial design means M-1 will complement your lifestyle, not override it.

DescriptionWhere versatility and discretion are concerned, M-1 has them in abundance. It’s equally suited to multi-channel or stereo sound, is an outstanding listen with or without a subwoofer, and comes complete with wall-bracket and table stand.'Anywhere' is the perfect positionM-1 is equally at home on a shelf or a wall, thanks to its swiveling multi-position foot, or its bespoke stand will bring it up to the perfect listening height. No matter where you position it, though, its sound will draw your attention.Coloured to blend in or stand outWith a choice of matte black or matte white finishes for both the cabinet and the perforated steel grille , M-1 is ready to blend into the background or make a bold statement — the choice is yours. Either way, it makes a sophisticated statement.Because your theatre is also your homeJudicious industrial design means M-1 will complement your lifestyle, not override it.

High power performance with great spatial representation One of the 42 mm tweeter cones is located on each sloping side at the centre of the powerful 17 cm subwoofers: The Cinema Ultra RD 200-THX follows the ideal structure of classic dipole speakers. The two tweeters are – as stipulated by THX® – connected together with reversed polarity to produce a diffuse, very three-dimensional soundscape. Because our cone operates in an extremely wide band, the Cinema Ultra RD 200-THX creates this desired diffuse sound field from as low as 1500 hertz. Despite its small size and moderate overall depth of just 16 centimetres, the effect speaker is capable of impressive sound levels - an important factor for the best cinema sound. And optimum installation is also child´s play thanks to the large number of wall-mounting options, including VESA brackets. HIGH-PERFORMANCE DIPOLE SURROUND LOUDSPEAKER THX Ultra2-certified dipole surround Speaker All of the chassis have been specially developed for the Cimema Ultra set in order to meet the very strict requirements of the THX Ultra2 standard Enveloping surround soundscape without speaker localisation due to the special chassis layout Specially tuned crossover for optimally diffuse sound emission according to the strict requirements of the THX Ultra2 standard Top acoustic performance through individual components developed for high performance in all details Markedly compact and flat enclosure for easy and unobtrusive integration into every home cinema system Various wall-mounting options Can also be used according to the THX Ultra2 guidelines as a rear surround dipole loudspeaker WOOFER-MIDRANGE 8 screw fixings for firm anchoring in the baffle Metal-Core-Technology Rigid ceramic/aluminum sandwich cone and dust cap for optimum precision Flow-optimised, highly stable die-cast aluminium cage to avoid compression effects and resonances TWEETER Extremely large 42 mm high-performance polyfibre-compound cone Computer-optimised Waveguide front panel with integrated diffusor for optimum dispersion characteristics according to the strict THX Ultra2 standard Solid die-cast aluminium enclosure with large pole piece hole Multiple damped coupling volume for particularly low resonance frequency Extremely powerful neodymium annular magnet system for the highest efficiency and outstanding broadband capability Highly resilient precision voice coil on a ventilated aluminium support Fine mesh cover grille for a dscreet look CROSSOVER Single-wiring connection terminal with gold-plated, acrylic sealed terminals Amplitude and phase-optimised crossover to meet the strict THX Ultra2 standard CABINET Removable fabric protection grille with optimum sound transmission and invisible magnet attachment Very stable, braced MDF enclosure with particularly low-resonance, 30 mm thick baffle Sophisticated mounting system with numerous variations Cinema Ultra stealth design comprising: o offset baffle in a high-quality deep black silk matt lacquer finish o durable brushed-metal textured film in anthracite on the body o front panel and trim rings in matt black with a black chrome gloss ring o magnetically held cloth cover on a thin MDF frame o low-reflection metal logo in brushed titanium look Closed housing for reproduction absolutely free of background noise at high levels according to the THX Ultra2 standard CABINET SURFACE Front: black silk matt / body: textured film - anthracite

The Bronze FX has a beautiful new form and has been designed to immerse you in compelling surround sound. Our renowned driver technology ensures an unforgettable home cinema performance. Nothing enhances the home cinema experience like a dedicated surround sound speaker. The compact, discreet design of the Bronze FX incorporates two 25 mm C-CAM Gold Dome tweeters with UD Waveguide and a 5 1/2" C-CAM mid-bass driver to deliver the Monitor Audio sonic magic. We are masters of effects speaker design and the new Bronze FX delivers our renowned surround sound experience to maximum effect. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered grilles for a more discreet appearance Angled baffles for optimal dispersion Discreet design with flush wall placements – recessed terminations Dedicated keyhole wall-mounts included for easy installation Switchable di-pole/ bi-pole configuration – for use when needing to change the phasing for AV systems – handed pairs Sealed cabinet for accurate performance when installed in restricted voids or close to a wall Specifications: System Format: 2-Way Frequency Response (-6 dB): 88 – 25,000 Hz (Free field), 74 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 86 dB Nominal Impedance: 8 ohms Minimum Impedance: 4 ohms Maximum SPL: 108 dBA (pair) Power Handling (RMS): 80 W Recommended Amplifier Requirements: 20 — 80 W Bass Alignment: Sealed Cabinet Crossover Frequency: 2,800 Hz Drive Unit Complement: 1 x 51/2" C-CAM mid-range driver, 2 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 287 x 284 x 124 mm (115/16 x 113/16 x 47/8") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): N/A Weight (each): 3.9 kg (8 lb 10 oz) Sold As: Pair

The Bronze FX has a beautiful new form and has been designed to immerse you in compelling surround sound. Our renowned driver technology ensures an unforgettable home cinema performance. Nothing enhances the home cinema experience like a dedicated surround sound speaker. The compact, discreet design of the Bronze FX incorporates two 25 mm C-CAM Gold Dome tweeters with UD Waveguide and a 5 1/2" C-CAM mid-bass driver to deliver the Monitor Audio sonic magic. We are masters of effects speaker design and the new Bronze FX delivers our renowned surround sound experience to maximum effect. Key Features: Monitor Audio signature C-CAM Gold Dome Tweeter upgraded with the new Uniform Dispersion (UD) Waveguide for an incredibly lifelike sound C-CAM mid-bass driver featuring updated cone geometries and Damped Concentric Mode (DCM) technology which allows the speaker to have a deeper, fuller sound while retaining a clean and precise presentation Designed for performance – intricately optimised listening experience for music and movies Acoustically transparent hexagonal dispersion pattern grille also featured on our award-winning Silver and Gold Series, for the Monitor Audio family look High-quality gold-plated terminals Pureflow silver-plated oxygen-free copper internal cabling for highest quality current transfer through the signal chain Audio transparent bespoke cloth covered grilles for a more discreet appearance Angled baffles for optimal dispersion Discreet design with flush wall placements – recessed terminations Dedicated keyhole wall-mounts included for easy installation Switchable di-pole/ bi-pole configuration – for use when needing to change the phasing for AV systems – handed pairs Sealed cabinet for accurate performance when installed in restricted voids or close to a wall Specifications: System Format: 2-Way Frequency Response (-6 dB): 88 – 25,000 Hz (Free field), 74 – 30,000 Hz (In room) Sensitivity (2.83v @ 1m): 86 dB Nominal Impedance: 8 ohms Minimum Impedance: 4 ohms Maximum SPL: 108 dBA (pair) Power Handling (RMS): 80 W Recommended Amplifier Requirements: 20 — 80 W Bass Alignment: Sealed Cabinet Crossover Frequency: 2,800 Hz Drive Unit Complement: 1 x 51/2" C-CAM mid-range driver, 2 x 25 mm C-CAM Gold Dome tweeter with UD Waveguide External Dimensions (Including Grille and Terminals (H x W x D)): 287 x 284 x 124 mm (115/16 x 113/16 x 47/8") External Dimensions (including Outrigger Feet and Spikes (H x W x D)): N/A Weight (each): 3.9 kg (8 lb 10 oz) Sold As: Pair

Chora Surround is a compact loudspeaker that adds side and rear channels to your Home Cinema system for an even more immersive experience. The sound comes from all sides, accentuating the realism of scenes and heightening your sensations.  Made in France in Focal’s workshops, Chora Surround uses the same Slatefiber technology seen in the Chora speaker drivers, ensuring high-quality sonic coherence with the other loudspeakers in the line. Indeed, devised and designed to complete your audio system, this product combines perfectly with the Chora 826-D Dolby Atmos® loudspeaker and the Chora Center loudspeaker. And to increase the depth of sound, Focal engineers have also developed the Sub 600P subwoofer. The loudspeaker fixes quickly and easily to the wall thanks to the wall attachment supplied. And thanks to its black MDF finish, its magnetic grille and sleek design, it will be a seamless yet stunning addition that fits perfectly into your listening room. THE TNF TWEETER A Focal exclusive and made in France in our workshops from an Aluminium/Magnesium alloy, this tweeter offers many benefits, particularly in sound spatialisation. With this tweeter, there is no shortage of sound harmony and precision. THE SLATEFIBER CONE Also made in France in Focal's workshops, it is characterised by a rich, dynamic and balanced sound, particularly in the midranges, as well as a stunning aesthetic thanks to its “slate” effect. It is the fruit of several years of R&D: the engineers have mixed ultra-lightweight recycled non-woven carbon fibres –a first in the world of audio– with thermoplastic polymer. The combination of these materials offers excellent acoustic performance. Specifications: Type: 2-way sealed surround loudspeaker  Speaker drivers: 61/2" (16.5cm) Slatefiber Midbass. 1” (25mm) TNF Al/Mg inverted dome tweeter  Sensitivity (2,83V/1m): 89dB Frequency response (±3 dB): 80Hz - 28kHz  Low frequency point (-6 dB): 67Hz  Nominal impedance: 8Ω Minimum impedance: 4.5Ω Recommanded amplifier power: 25/100W  Crossover frequency: 3,000Hz Dimensions (HxWxD): 171/2x315/16x1215/8" (44,5x10x32cm)  Net weight (with grille): 12lbs (5.45kg)  Packaging dimensions (HxWxD): 221/16x71/8x181/2" (56x18x47cm) Net weight (with packaging): 15.7lbs (7.1kg)

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The OBERON ON-WALL is a powerful on-wall speaker with a slim and discreet design. Despite its compact size, the on-wall speaker will render audio like a much larger model, due to its combination of technologies. The slim profile of the speakers makes it easy to integrate into any room. We have united the best elements from our current speakers and brought them together in the OBERON ON-WALL to deliver on audio quality, looks and versatility. The OBERON ON-WALL houses an oversized 29 mm soft dome tweeter together with a 5.25" SMC based wood fibre woofer - supported by a unique down-firing bass port design, which lets the OBERON ON-WALL use the wall to extend the bass performance. For this reason, it's the perfect choice for both stereo and surround setups.  To achieve a wide dispersion pattern in the listening area, the driver materials and geometry applied have been carefully selected. The same principles have been applied in the design of the crossover. As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI loudspeakers are not designed to be toed-in. Specifications: Product series: OBERON Frequency Range (+/-3 dB) [Hz]:  55 - 26,000 Sensitivity (2,83 V/1 m) [dB]: 86.5 Nominal Impedance [ohms]: 6 Maximum SPL [dB]: 107 Recommended Amplifier Power [W]: 25 - 100 Crossover Frequency [Hz]: 2,100 Crossover Principle: 2-way High frequency driver, Quantity: 1 x 29 mm High frequency driver, Diaphragm type: Soft Textile Dome Low frequency driver, Quantity: 1 X 5.25" Low frequency driver, Diaphragm type: Wood Fibre Cone Enclosure type Bass Reflex Bass Reflex Tuning Frequency [Hz]: 50 Connection Input: Single Wire Magnetic Shielding Recommended Placement: On-Wall Recommended Distance From Wall [cm]: 0 - 10 Dimensions With Base (HxWxD) [mm]: 385 x 245 x 120 Accessories Included: Manual,Rubber Feet,Front Grille Weight [kg]: 4.9

The PF7SR surround sound speaker is designed to reproduce surround effects as part of a home cinema installation. Equipped with drivers oriented toward different points in the room, this speaker is necessary to reproduce all the atmospheric surround sound effects of films, TV series and concerts. With the Elipson Prestige Facet 7 SR, the lateral walls of the listening room are used to offer a much more immersive listening experience. These speakers handle the full range of immersive multichannel formats and completely surround the listener with sound. They have inherited all the trademarks of the Prestige Facet range: an elegant design, high-quality materials, a meticulous finish... The passive filter is composed of audiophile-grade components to offer a particularly precise and detailed listening experience. This surround speaker offers the unique feature of functioning in dipole mode (one or two channels). It is equipped with a 5,52'' mid-low driver and two 25 mm horn-loaded tweeters to offer ultra-efficient directivity and add a few surprises to the listening experience. Its frequency response ranges from 65 Hz et 20 kHz à ± 3 dB Its dual binding posts allow it to be connected to the surround and rear surround channels of a home cinema receiver. The energy and detail offered by this speaker make it an ideal choice for a 5.1 or 7.1 home cinema installation. Specifications : Speaker Surround Fixation On-Wall Number of way 2 Power 80 W RMS Tweeter Horn 2 x 1 " Mid-bass driver 5,52 " Frequency Response (±3 dB)65 Hz - 25 kHz Sensitivity 87 dB/1W/1m Impedance 8 Ohms Finish MDF box, Vinyl veneer Dimensions (W x H x D)380 x 220 x 140 mm Weight 5 kg Dimensions packaging (W x H x D)455 x 310 x 455 mm Weight with packaging, unit11,1 kg

The DALI ALTECO C-1 is truly a multipurpose speaker in both design and function. DALI wanted to ensure that the ALTECO C-1 is usable as both a height speaker as well as a traditional stereo speaker.By designing the crossover for stereo use and by keeping a strict focus on DALI sound design principles, we have created a speaker that fulfills both criteria. It is the perfect fit for adding height information to a surround setup or taking the role as an out-of-the-way stereo speaker.The ALTECO C-1 delivers believable height information from Atmos, DTS-X and Auro-3D movies in surround setup - not only when “firing up” using the ceiling as a reflector, but also “firing down” from a position up under the ceiling.The ALTECO C-1 is able to achieve this even without special equalizing in order to enhance the effects from HRTF (Head Related Transfer Function) technology. A technology found in Atmos certified speakers.Instead the ALTECO C-1 relies only on the height processing done in the amplifier, when selected. Had we included non-linear HRTF equalizing in the ALTECO C1, it would have been impossible to use it as a versatile neutral speaker, limiting the use to only an up-firing type speaker.Designed the way it is the DALI ALTECO C-1 offers the best from several worlds giving you ultimate flexibility and multiple applications. DUAL SOUND MODEThe unique angular design combined with the dual sound mode enables this speaker to be used in a multitude of different scenarios. Choose 'UP' on the front baffle switch to beam the sound waves either straight out for a soft downwards angle, or by selecting 'DOWN', beaming the sound almost straight down for close position listening.UP-FIRINGThe angular design of this speaker makes it perfect for up-firing use. Combined with a surround receiver that has the ability to render height information (Dolby Atmos, DTS-X or Auro-3D), placing it on top of the front speakers, and even on top of the rear speakers will offer an excellent ceiling reflected rendering of height information in compatible movies and concerts.WOOD FIBRE CONESOur low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.SOFT DOME TWEETERThe dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2). Specifications :Product seriesALTECOFrequency Range (+/-3 dB) [Hz]74 - 25,000 HzSensitivity (2,83 V/1 m) [dB]83.0 dBNominal Impedance [ohms]6 ohmsMaximum SPL [dB]103 dBRecommended Amplifier Power [W]40 - 100 WattCrossover Frequency [Hz]2,100 HzCrossover Principle2-wayHigh frequency driver, Quantity1 x 21 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4.5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire (Spring loaded push button) Recommended PlacementOn-Wall On speaker Recommended Distance From Wall [cm]    1 - 100 cmDimensions (HxWxD) [mm]265 x 160 x 200Weight [kg]2.9 kgAccessories IncludedRubber Feet Manual 

The DALI ALTECO C-1 is truly a multipurpose speaker in both design and function. DALI wanted to ensure that the ALTECO C-1 is usable as both a height speaker as well as a traditional stereo speaker.By designing the crossover for stereo use and by keeping a strict focus on DALI sound design principles, we have created a speaker that fulfills both criteria. It is the perfect fit for adding height information to a surround setup or taking the role as an out-of-the-way stereo speaker.The ALTECO C-1 delivers believable height information from Atmos, DTS-X and Auro-3D movies in surround setup - not only when “firing up” using the ceiling as a reflector, but also “firing down” from a position up under the ceiling.The ALTECO C-1 is able to achieve this even without special equalizing in order to enhance the effects from HRTF (Head Related Transfer Function) technology. A technology found in Atmos certified speakers.Instead the ALTECO C-1 relies only on the height processing done in the amplifier, when selected. Had we included non-linear HRTF equalizing in the ALTECO C1, it would have been impossible to use it as a versatile neutral speaker, limiting the use to only an up-firing type speaker.Designed the way it is the DALI ALTECO C-1 offers the best from several worlds giving you ultimate flexibility and multiple applications. DUAL SOUND MODEThe unique angular design combined with the dual sound mode enables this speaker to be used in a multitude of different scenarios. Choose 'UP' on the front baffle switch to beam the sound waves either straight out for a soft downwards angle, or by selecting 'DOWN', beaming the sound almost straight down for close position listening.UP-FIRINGThe angular design of this speaker makes it perfect for up-firing use. Combined with a surround receiver that has the ability to render height information (Dolby Atmos, DTS-X or Auro-3D), placing it on top of the front speakers, and even on top of the rear speakers will offer an excellent ceiling reflected rendering of height information in compatible movies and concerts.WOOD FIBRE CONESOur low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.SOFT DOME TWEETERThe dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2). Specifications :Product seriesALTECOFrequency Range (+/-3 dB) [Hz]74 - 25,000 HzSensitivity (2,83 V/1 m) [dB]83.0 dBNominal Impedance [ohms]6 ohmsMaximum SPL [dB]103 dBRecommended Amplifier Power [W]40 - 100 WattCrossover Frequency [Hz]2,100 HzCrossover Principle2-wayHigh frequency driver, Quantity1 x 21 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4.5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire (Spring loaded push button) Recommended PlacementOn-Wall On speaker Recommended Distance From Wall [cm]    1 - 100 cmDimensions (HxWxD) [mm]265 x 160 x 200Weight [kg]2.9 kgAccessories IncludedRubber Feet Manual 

The DALI ALTECO C-1 is truly a multipurpose speaker in both design and function. DALI wanted to ensure that the ALTECO C-1 is usable as both a height speaker as well as a traditional stereo speaker.By designing the crossover for stereo use and by keeping a strict focus on DALI sound design principles, we have created a speaker that fulfills both criteria. It is the perfect fit for adding height information to a surround setup or taking the role as an out-of-the-way stereo speaker.The ALTECO C-1 delivers believable height information from Atmos, DTS-X and Auro-3D movies in surround setup - not only when “firing up” using the ceiling as a reflector, but also “firing down” from a position up under the ceiling.The ALTECO C-1 is able to achieve this even without special equalizing in order to enhance the effects from HRTF (Head Related Transfer Function) technology. A technology found in Atmos certified speakers.Instead the ALTECO C-1 relies only on the height processing done in the amplifier, when selected. Had we included non-linear HRTF equalizing in the ALTECO C1, it would have been impossible to use it as a versatile neutral speaker, limiting the use to only an up-firing type speaker.Designed the way it is the DALI ALTECO C-1 offers the best from several worlds giving you ultimate flexibility and multiple applications. DUAL SOUND MODEThe unique angular design combined with the dual sound mode enables this speaker to be used in a multitude of different scenarios. Choose 'UP' on the front baffle switch to beam the sound waves either straight out for a soft downwards angle, or by selecting 'DOWN', beaming the sound almost straight down for close position listening.UP-FIRINGThe angular design of this speaker makes it perfect for up-firing use. Combined with a surround receiver that has the ability to render height information (Dolby Atmos, DTS-X or Auro-3D), placing it on top of the front speakers, and even on top of the rear speakers will offer an excellent ceiling reflected rendering of height information in compatible movies and concerts.WOOD FIBRE CONESOur low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.SOFT DOME TWEETERThe dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2). Specifications :Product seriesALTECOFrequency Range (+/-3 dB) [Hz]74 - 25,000 HzSensitivity (2,83 V/1 m) [dB]83.0 dBNominal Impedance [ohms]6 ohmsMaximum SPL [dB]103 dBRecommended Amplifier Power [W]40 - 100 WattCrossover Frequency [Hz]2,100 HzCrossover Principle2-wayHigh frequency driver, Quantity1 x 21 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4.5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire (Spring loaded push button) Recommended PlacementOn-Wall On speaker Recommended Distance From Wall [cm]    1 - 100 cmDimensions (HxWxD) [mm]265 x 160 x 200Weight [kg]2.9 kgAccessories IncludedRubber Feet Manual 

FAZON SAT is a two-way designed satellite loudspeaker including a 4½” mid/woofer with wood fibre cone and an oversized 28mm/1.1” soft dome tweeter with a powerful neodymium magnet system. The drivers share the same technology platform as the drivers developed for the acclaimed MENTOR and IKON series.  Equipped with a 360º pivoting wall bracket, FAZON SAT offers a flexible and innovative “Twist ‘n‘ Tilt” function. You can angle the speaker precisely horizontally and vertically; tilt it up or down, swivel it to either side and even mount it upside down.The loudspeakers are delivered with a handy table stand for easy placement on a TV table, bookshelf, etc. The elegant and curved cabinet body is a combination of high gloss lacquered aluminium and composite material for the baffle.The surface of the baffle is treated with a rubbery coating for a smooth, elegant touch. The grille, which conceals and protects the drivers and the baffle, is held in place with magnets - allowing quick, easy removal with no visible signs of mounting pegs on the grille. Simple and stylish satellite speakers.FAZON SAT 5.1-3Awarded the highly acclaimed ‘Best Style Package for 2011’ by What HiFi, these compact DALI speakers will not let you down. An aesthetically pleasing set-up consisting of 5 identical speakers, assisted by the SUB E-12 F. The FAZON SAT pleases eyes and ears alike. WOOD FIBRE CONESLow-loss drivers made of low-mass paper cones with wood fibre reinforcement. The driver technology builts on the MENTOR and IKON series.CURVED DESIGNThe FAZON series is based on a curved design that Illiminates reflections and standing waves.DALI DRIVER TECHNOLOGYBuild around the traditional ultra light soft dome tweeter and the well known wood fibre cone low-loss woofer, every speaker in the FAZON series is a master of audio reproduction.INTELLIGENT TERMINALSEvery speaker in the FAZON series has an intelligent terminal solution that is perfectly aligned with the user scenarios of the speaker. Specifications : Product seriesFAZONFrequency Range (+/-3 dB) [Hz]86 - 25,000Sensitivity (2,83 V/1 m) [dB]86.0Nominal Impedance [ohms]6Maximum SPL [dB]104Recommended Amplifier Power [W]20 - 120Crossover Frequency [Hz]1,800 HzHigh frequency driver, Quantity1 x 28 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4.5"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire Magnetic ShieldingNoRecommended PlacementCentre / Soundbar On-Wall Shelf or stand Dimensions With Base (HxWxD) [mm]  287 x 146 x 172 (with table stand)Dimensions (HxWxD) [mm]255.5 x 138 x 87Weight [kg]2.4Accessories IncludedAssembly Tools Manual Table Stand Wall Bracket  

True Hi-Fi sound really can come in a small and elegant design. With its curved high-gloss lacquered aluminium cabinet, coated composite front baffle and snug fitting grille the ultra-compact FAZON MIKRO fits perfectly in any living room. This compact loudspeaker is built around the renowned DALI trademark wood fibre cone driver and soft dome tweeter module.The 4” woofer delivers an accurate, detailed and dynamic sonic reproduction of music or movie sound, and the extremely strong cabinet design ensures that acoustic and mechanical resonances are almost non-existent.The 20 mm ultra-light soft dome tweeter enables the FAZON MICRO to deliver a richly detailed mid-range, and to extend the high frequency well beyond the audible range. Featuring as the centrepiece in a 5.1 surround system, working in a stereo setup or acting as rear speakers with any of the other FAZON models the FAZON MIKRO will always surprise and delight whether you are listening to music or watching a movie.The FAZON MIKRO is true Hi-Fi in a very small package.Wall bracketThe ingenious multi-function bracket enables simple wall mounting of both the FAZON MIKRO and FAZON VOKAL. The close placement to the wall not only looks good but also increases the lower bass performance.Push Button Terminals. Easy to use push button terminals make connecting the speaker cables simple and ensure a tight and optimum connection that will not loosen over time.FAZON MIKRO 5.1Positioning a complete surround system in a discreet and elegant way can be a daunting task. FAZON MIKRO offers a stylish and unobtrusive solution to this problem and allows you to have a full 5.1 surround system in your living room that delivers a true hi-fi audio performance.Paired with the FAZON SUB 1 you have the perfect solution for a small living room. DIE-CAST ALUMINIUMThe fluid, organic lines of the die-cast aluminium enclosures combined with enhanced structural integrity, reduced vibration and no parallel surfaces, all key elements in the pure, musical tone of these masterful loudspeakers.CURVED DESIGNThe FAZON series is based on a curved design that Illiminates reflections and standing waves.DALI DRIVER TECHNOLOGYBuild around the traditional ultra light soft dome tweeter and the well known wood fibre cone low-loss woofer, every speaker in the FAZON series is a master of audio reproduction.INTELLIGENT TERMINALSEvery speaker in the FAZON series has an intelligent terminal solution that is perfectly aligned with the user scenarios of the speaker. Specifications : Frequency Range (+/-3 dB) [Hz]95 - 25,000Sensitivity (2,83 V/1 m) [dB]84.0Nominal Impedance [ohms]6Maximum SPL [dB]101Recommended Amplifier Power [W]30 - 120Crossover Frequency [Hz]2,560 HzHigh frequency driver, Quantity1 x 20 mmHigh frequency driver, Diaphragm typeSoft Textile Dome Low frequency driver, Quantity1 x 4"Low frequency driver, Diaphragm typeWood Fibre Cone Enclosure typeClosed Box Connection InputSingle Wire Magnetic ShieldingNoRecommended PlacementOn-Wall Shelf or stand Recommended Distance From Wall [cm]  0 - 50Dimensions With Base (HxWxD) [mm]196 x 113 x 96Weight [kg]1.5Accessories IncludedManual Rubber Pads Wall Bracket Wall Bracket Bumper Optional AccessoriesBlack Grille Floor Stand White Grille 

2-way surround loudspeakerSurround Be features an exclusive "Bi/Twin" design with twin inputs, enabling the loudspeaker to be used both in 5.1 (Bipolar mode) or 7.1 (double mono mode). This feature avoids having multiple surround loudspeakers in your Home Cinema.Surround Be is composed of:2 x 61/2" (16.5cm) "W" cone bass/midrange2 x pure Beryllium inverted dome tweeters 

Aria SR 900 is a 2-way bipolar surround loudspeaker with the same acoustic characteristics as the other loudspeakers in the Aria range.Associated with floorstanding speakers Aria 936, center speaker Aria CC 900 and a subwoofer Sub 300 P, surround speakers Aria SR 900 will assure you a reference 5.1 Home Cinema!Composed of two 5” (13cm) woofers with Flax sandwich cones, it provides natural midrange, rich bass, very high-definition and natural sound.For the treble register, there are two TNF aluminum/magnesium inverted dome tweeters with Poron suspension for smoother sound.Their Urethane waveguide improves horizontal directivity and provides a more precise sound image.Thanks to its slim cabinet design the SR 900 loudspeaker is compact. It is easy to integrate into your interior using the Polyfix wall-mounting system provided. Poron Suspension For Soft TrebleFor the TNF tweeter, we have brought two major evolutions to our aluminum/magnesium tweeter. The suspension between the dome and its bracket uses Poron, a material with shape memory.This suspension method is directly derived from the famous Utopia Beryllium tweeter, making it possible to reduce distortion by a factor of three in the 2-3kHz range, where the human ear has very great sensitivity.The inverted dome’s spatial characteristics and very low directivity already make it greatly superior to the conventional domes used by our competitors. This guarantees an incredibly stable sound stage which makes the listening position much less critical.Flax Cone, So OriginalThe flax cone are made in France exclusively by Focal since 2013. With their original design, the cone are entirely oriented towards acoustic performance. They are made of high quality flax fiber enclosed by two thin layers of glass fiber. F cone are characterized by their natural sound, with low coloration, their richness of reproduction in the midrange register and their tighter bass.The lightness of the fiber satisfies the criteria of high internal damping, high velocity and high flexural rigidity. Flax is twice as light as fiberglass, because the fiber is hollow. It also has very low elasticity which makes it ideal to increase the flexural rigidity of a sandwich structure. Features:New Flax coneNew TNF tweeterSpeaker drivers developed and manufactured in France by FocalBlack High Gloss and Walnut finishesLeather-finished body 

Small but powerful! Two-way bass-reflex satellite loudspeaker. Dive into the universe of Sib Evo, the evolution of the iconic Sib & Co range! These small loudspeakers will blend in everywhere thanks to their timeless and futuristic design. Let yourself be blown away by their quality and the power of their sound despite their small size! Sib Evo delivers significant acoustic power. So, the volume can be loud, without it ever being restrained by the size of the amplifier. It will add a new audio dimension to your ambiance music, multi-room system or Home Cinema setup. The audio track will perfectly render the music, as well as the dialogue and the full intensity of the action or the emotion. All the key elements of the film are conveyed with extreme clarity and pitch-perfect precision, giving you the impression of being right at the heart of the action. This satellite loudspeaker will truly revolutionise your Home Cinema! Combined with the Cub Evo subwoofer in a 5.1 pack, it can also be installed with the Sib Evo Dolby Atmos®, giving you a Home Cinema system with a completely new dimension. A revolution for your films! It can be installed on furniture, mounted to its stand, or fixed to a wall using a mounting system. This 2.0 pack is composed of two Sib Evo loudspeakers.