Active Speakers

ART 735-A MK5 is a unique product in its category. The 3,0" compression driver offers unique vocal clarity and sound projection. The 15” woofer offers an extremely linear response and a precise, deep low frequency control. The transducers are produced using the most advanced assembly technologies. The amplifier delivers 1400 watts and is controlled by a DSP that takes care of crossover, equalisation, phase control, soft limiting and speaker protections.Features132 dB Max SPL1400 WATT 2-way peak power90° x 60°, Wide dispersion constant directivity hornInnovative DSP Processing3,0" Titanium diaphragm Compression Driver15" WooferFiRPHASE TechnologyXBOOST Low Frequencies EnhancerPowerful Class D AmplifiersRCF's Class-D power amplifier technology packs huge performance operating with high efficiency into a lightweight solution. ART 7 amplifiers deliver ultra-fast attack, realistic transient response and impressive audio performance. The amplifier features a solid mechanical aluminium structure which not only stabilises the amplifier during transportation but also helps the fan-less heat dissipation. All the ART 7 amplifiers present SMPS power supply section in order to produce maximum output and minimum transportation weight.Legendary TransducersSuperior Compression DriversThe ND840 Compression Driver in pure Titanium with a 3” voice coil allows a crossover point at only 800 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.Potent WooferThe low-frequency transducer is a high-power 15’’ woofer with a 3" voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.

Mackie Thump 210 Active SpeakerThe Mackie Thump210 is a compact 10” active speaker with 1,400 W of power that offers features such as feedback suppression and a music ducking mode in addition to proven sound quality. Connect your sources to the integrated 2-channel mixer with XLR/TRS combo sockets and a stereo 3.5 mm aux input and enjoy the powerful amplification via the 1“ compression driver and the 10” high-performance woofer. There's also a handy thru output that mixes both inputs together and is suitable for connecting to other devices in your system. Operation as a wedge speaker on the floor is just as possible as operation as a PA speaker on a stand. The Thump210 may be lightweight, but it still lives up to our motto “Built-like-a-Tank™”: it is the ultimate compact speaker for PA systems, DJs, bars and much more.FeaturesMusic ducking mode to reduce the level of channel 2 when a signal is present in channel 1Integrated feedback suppression to prevent feedback and uncontrolled hummingIntegrated 2-channel mixerFlexible inputs via TRS/XLR and 3.5 mm jack inputEasy to load despite massive “Built-Like-A-Tank™” construction to withstand any gigWedge design for optimum angle when used as a floor monitor

THE SONIC SEQUELWhen Electro-Voice introduced the first-generation ZLX series in 2013, the goal was to bring real pro-audio performance to a more accessible price point than ever before, combining superior Electro-Voice sound quality with lightweight-yet-robust construction and breakthrough configuration and control. Users around the world soon took notice, and ZLX’s proven performance and day-to-day reliability quickly positioned it as the undisputed industry benchmark – the first and best in the product class it created.Now, adding to the momentum of well over one million ZLX units delivered globally, ZLX G2 steps up as the sequel to that success story. The point of entry into the Electro-Voice portable loudspeaker portfolio, ZLX G2 builds on its predecessor’s winning formula with increased maximum SPL, frequency range, durability and connectivity, along with a range of ergonomic refinements.SUPERIOR ENGINEERING, SUPERIOR SOUNDThe standout audio quality that made ZLX the go-to choice for both musical performance/playback and spoken-word applications has been leveled-up with ZLX G2. Maximum SPL has increased to 129 dB (ZLX-15P-G2), and premium components behind the grille ensure ZLX G2 offers stunning acoustic performance for everyday use. The woofer and compression driver in each ZLX G2 model are coupled to a patented SST (Signal Synchronized Transducers) ported waveguide, enhancing low-frequency extension and delivering evenvertical and horizontal coverage across all frequencies – all while allowing a more compact form factor. ZLX G2 packs a sonic punch that’s worthy of the Electro-Voice name.

THE SONIC SEQUELWhen Electro-Voice introduced the first-generation ZLX series in 2013, the goal was to bring real pro-audio performance to a more accessible price point than ever before, combining superior Electro-Voice sound quality with lightweight-yet-robust construction and breakthrough configuration and control. Users around the world soon took notice, and ZLX’s proven performance and day-to-day reliability quickly positioned it as the undisputed industry benchmark – the first and best in the product class it created.Now, adding to the momentum of well over one million ZLX units delivered globally, ZLX G2 steps up as the sequel to that success story. The point of entry into the Electro-Voice portable loudspeaker portfolio, ZLX G2 builds on its predecessor’s winning formula with increased maximum SPL, frequency range, durability and connectivity, along with a range of ergonomic refinements.SUPERIOR ENGINEERING, SUPERIOR SOUNDThe standout audio quality that made ZLX the go-to choice for both musical performance/playback and spoken-word applications has been leveled-up with ZLX G2. Maximum SPL has increased to 129 dB (ZLX-15P-G2), and premium components behind the grille ensure ZLX G2 offers stunning acoustic performance for everyday use. The woofer and compression driver in each ZLX G2 model are coupled to a patented SST (Signal Synchronized Transducers) ported waveguide, enhancing low-frequency extension and delivering evenvertical and horizontal coverage across all frequencies – all while allowing a more compact form factor. ZLX G2 packs a sonic punch that’s worthy of the Electro-Voice name.SMART CONTROL AND CONNECTIVITYZLX G2 powered versions are “Powered by Dynacord” – onboard premium electronics from Electro-Voice’s sibling brand. Ultra-efficient 1000 W Class-D power amplifier modules feature an integrated four-channel, three-input digital mixer with high-quality effects. The mixerincludes two XLR/TRS combo jacks and provides 24 V phantom power and Hi-Z compatibility. The mixer also includes pro features such as AFS (automatic feedback suppression), ducking, compression, loudspeaker delay settings and more.Five system mode settings are available: Music, Live, Speech, Club and FRFR (full range, flat response). New for ZLX G2 and a unique feature in this product class, the FRFR setting offers a flat/neutral frequency response to produce accurate results when used with modeling processors and guitar cab simulators. Powered ZLX G2 loudspeakers also contain Electro-Voice-specific subwoofer presets that adjust for both gain and time alignment, resulting in full acoustic optimization. Additional high pass (HP) filters are available in the DSP for increased compatibility.All ZLX G2 loudspeaker and mixer functions can be remote-controlled and monitored using the Electro-Voice QuickSmart Mobile app, available for iOS and Android. The app allows pairing and grouping of up to six Bluetooth®-equipped Electro-Voice portable loudspeakers, in any combination. Users can wirelessly pair and link to two ZLX G2 loudspeakers in a stereo setup using Bluetooth® true wireless stereo streaming. Local configuration can be completed in seconds using the single-knob encoder with LCD. The new, full-color LCD is larger and higher resolution, offering a crisp, clear view of system settings. ZLX G2 makes sounding great simple for users of all levels.

THE SONIC SEQUELWhen Electro-Voice introduced the first-generation ZLX series in 2013, the goal was to bring real pro-audio performance to a more accessible price point than ever before, combining superior Electro-Voice sound quality with lightweight-yet-robust construction and breakthrough configuration and control. Users around the world soon took notice, and ZLX’s proven performance and day-to-day reliability quickly positioned it as the undisputed industry benchmark – the first and best in the product class it created.Now, adding to the momentum of well over one million ZLX units delivered globally, ZLX G2 steps up as the sequel to that success story. The point of entry into the Electro-Voice portable loudspeaker portfolio, ZLX G2 builds on its predecessor’s winning formula with increased maximum SPL, frequency range, durability and connectivity, along with a range of ergonomic refinements.SUPERIOR ENGINEERING, SUPERIOR SOUNDThe standout audio quality that made ZLX the go-to choice for both musical performance/playback and spoken-word applications has been leveled-up with ZLX G2. Maximum SPL has increased to 129 dB (ZLX-15P-G2), and premium components behind the grille ensure ZLX G2 offers stunning acoustic performance for everyday use. The woofer and compression driver in each ZLX G2 model are coupled to a patented SST (Signal Synchronized Transducers) ported waveguide, enhancing low-frequency extension and delivering evenvertical and horizontal coverage across all frequencies – all while allowing a more compact form factor. ZLX G2 packs a sonic punch that’s worthy of the Electro-Voice name.

Mackie Thrash212 GO, 12" self powered speaker with 300W power and 52Hz - 20kHz frequency response at -10dB. The new Thrash212 GO is easy to carry, has Bluetooth and a rechargeable battery that can be changed easily with a battery life of up to 10 hours. It has an amplifier class D, while the Bluetooth function in addition to streaming music offers the possibility of connecting to a second Thrash212 GO. low weight.On the back side there are all the necessary indicators regarding the battery and connections with Bluetooth, inputs and outputs and master volume control as well as each channel.Battery InformationBattery Type: Lithium IonBattery life: up to 10 hoursCharging time: 5 hours (without signal) / 7 hours (with signal)Capacity: 12500mAhVoltage: 11.1VOperating temperature range: –10 ~ 40?C // 14 ~ 104?FCharging temperature range: –10 ~ 45?C // 14 ~ 113?F

Mackie ShowBox, portable self-powered speaker with battery and detachable 6-channel mixer, with 400W power, max SPL 122dB and frequency response 48Hz-20KHz at -10dB. Designed for the road, this speaker is a complete PA system that can be connected to guitars as well as a microphone.The Showbox gives total control with the detachable 6-channel mixer housed on one side. Volume levels for microphones and instruments, effects, EQ, looper, tuner and many other settings are some of the possibilities offered by this new speaker.Its rechargeable battery can power the speaker for 12 hours, while on its back there is a port for an SD card in which the live can be recorded and a USB-C port for connecting to a computer or for a live stream.The Showbox features two PA and AMP mode options, effects for guitar as well as vocals, FX loop for pedals and settings for indoor or outdoor operation. Also included are separate 3-band parametric EQs and compressors on each channel at the touch of a button.

The self-described “beating heart” of RCF’s speaker lineup, the ART 7 Series is an industry-standard choice for live sound engineers seeking world-class sound and rugged durability. With the debut of the MK5 iterations, the ART 7 speakers see their 2-way architecture and 1,400-watt output expanded with cutting-edge sound shaping tools to reach the peak of live-sound possibility. RCF achieves their powerful yet balanced projection by pairing revamped compression drivers with 1.75-inch Kapton diaphragms to safeguard your speakers from physical and thermal wear, all while increasing articulation in every register. Sweetwater’s live sound professionals find that the ART 7 Series offers an exceptionally linear response — a result of RCF’s FiRPHASE technology — and superior low-frequency control to dial in your sound with state-of-the-art XBoost low-frequency enhancer. Moreover, each loudspeaker has redesigned DSP to provide deeper control over the full scope of FiRPHASE and XBoost technologies. You also get onboard EQ, phase control, soft limiting, crossover, and speaker protections. With its advanced processing and comprehensive dispersion constant-directivity horn, RCF’s ART 7 speakers are nothing short of an excellent choice for almost any setting or application — from live sound duties to public address systems and beyond.

With more powerful performance, S1 Pro+ gets even louder than its predecessor. So you can be a vibe any time you bring this portable PA system to a gig.An integrated 3-channel mixer lets you bring the loud:Channels 1 and 2 for mics and instrumentsChannel 3 for Bluetooth streaming or AUX inputPortable with a handle, it’s easy to go from your car to the curb to the venue — if it’s the neighborhood bar or your neighbor’s backyard. Or make it both with this battery-powered PA system that offers up to 11 hours of play time.*An audio engineer in your pocketControl this professional Bluetooth speaker with the Bose Music app, plus get the entire ToneMatch presets library and keep track of Bluetooth connections.Everything you need for a great showCycle through volume, treble, and bass for each channel and access ToneMatch presets and reverb settings for Channels 1 and 2. Change positions and the OLED displays automatically rotate.Mix work & PLAYBetween shows, stream music with your phone to add professional sound to your party. The S1 Pro+ is our most powerful Bluetooth party speaker. And if your friends think they can sing better than you, connect a mic, throw a karaoke night, and prove them wrong.Be ready for any venue with four positioning options and Auto EQ, which senses the orientation to adjust settings for the best performance.TILTED BACK ON FLOORVERTICALLY ON TABLEMOUNTED ON STANDMONITOR MODELive Stream mode allows the system to be recognized as an audio interface when you connect it to your computer using a USB-C® cable. This lets you perform live for an online audience or record audio directly to your computer’s digital audio workstation (DAW).When Live Stream mode is enabled, the system passes a dual mono mix of Channels 1, 2, and 3 to a connected computer. In this mode, the channel volume controls behave like faders on a mixer. Adjusting channel volume using either the channel controls or the Bose Music app, adjusts the level of that channel within the mix being sent to your computer.A monitor volume control also appears on Channel 3, allowing you to adjust the master volume of the system speakers without affecting the computer mix. Once you enable Live Stream mode, it stays enabled until you disable it, or the system powers off.

Enhance your next set with Thump215XT, the next evolution of our full-featured Thump Series powered loudspeakers. Packed with more time-saving features than ever, tons of power, and an all-new cabinet, Thump215XT is the ultimate loudspeaker for DJs, bands and clubs that need pro sound without the insane price tag.

Enhance your next set with Thump212XT, the next evolution of our full-featured Thump Series powered loudspeakers. Packed with more time-saving features than ever, tons of power, and an all-new cabinet, Thump212XT is the ultimate loudspeaker for DJs, bands and clubs that need pro sound without the insane price tag.

From your first ever gig to to decades in the business, the Thump215 is the go to for countless Djs around the globe. Proven sound, powerful bass, and night reliability for Djs, clubs, bands and more.

Thump212 is ready to taken on your most demanding performances. Completely redesigned from the ground up. Thump 212 has beefier drivers, a 1400W amplifier, and powerful tools to make your next gig easier than ever. Thump212 is the ultimate compact loudspeaker for mobile PA systems, DJs, bars, and more.

Approach your next event with something big, bold and Bluetooth-compatible—Thump GO. It’s a portable battery-powered Bluetooth loudspeaker that delivers full, dynamic sound for any application.TAKE YOUR STAGE ANYWHERESet the stage, wherever you want it to be. Bring professional live sound reinforcement to small concerts, corporate events, assemblies, weddings, parties and more. Mackie Thump GO puts powerful sound processing and wireless control in your hands, whether you’re holding a guitar, wired or wireless microphone or DJ controller. 

DescriptionART 945-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of neodymium transducers - 4" titanium compression driver, 15" woofer - two-channel 2100W amplifier, and the constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 135 dB SPL, distortion-free sound. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing, perfectly tuned for each model, the audience will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available.Power that movesThe most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.M-Brace: a new cabinet designA professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure, for greater resistance to mechanical stress.Bass Motion ControlWhen searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.New paradigms in electroacousticsThe advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image. Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.Legendary transducersSuperior compression driversThe ND940 Compression Driver in pure Titanium with a 4 inches voice coil allows a crossover point at only 650 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.Potent wooferThe low-frequency transducer is a high-power 15’’ neodymium woofer with a 3.5’’ voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.Ready for heavy-duty applicationsThe highly innovative entertainment industry is permanently evolving accompanied by increasing demands on interconnection systems. Particular environmentally sealed connectors are highly requested for heavy-duty and harsh environment applications of entertainment equipment. ART 945-A features True Outdoor Protection (TOP) PowerCON TRUE1 power input connectors. These ruggedized sealed connectors feature not only IP protection but also UV resistance approved according to UL50E.New perspective on linearityRCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

DescriptionART 935-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 3" titanium/neodymium compression driver, 15" woofer, two-channel 2100W amplifier, and the constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 133 dB SPL, distortion-free sound. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing, perfectly tuned for each model, the audience will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available.Power that movesThe most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.M-Brace: a new cabinet designA professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure, for greater resistance to mechanical stress.Bass Motion ControlWhen searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.New paradigms in electroacousticsThe advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image. Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.Legendary transducersSuperior compression driversThe ND840 Compression Driver in pure Titanium with a 3” voice coil allows a crossover point at only 800 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.Potent wooferThe low-frequency transducer is a high-power 15’’ woofer with a 3" voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.New perspective on linearityRCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

DescriptionART 915-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 1.75" compression driver, 15" woofer, two-channel 2100W amplifier, and a constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 131 dB SPL, distortion-free sound. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing, perfectly tuned for each model, the audience will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available.Power that movesThe most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.M-Brace: a new cabinet designA professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure, for greater resistance to mechanical stress.Bass Motion ControlWhen searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.New paradigms in electroacousticsThe advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image. Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.Superior transducersLightweight and powerful, RCF drivers are a true reference for high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components.High frequenciesThe new 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity, enhancing transient response and improving coupling with the low-frequency transducer.Low frequenciesLow-frequency transducer design gains more stability over higher currents, with less distortion, and is highly efficient in terms of heat dissipation. RCF quality control is very strict. Our woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels. Only the best woofer design can fit ART 9.New perspective on linearityRCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

DescriptionART 910-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 1.75" compression driver, 10" woofer, two-channel 2100W amplifier, and the constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 130 dB SPL, distortion-free sound. Merging RCF proprietary FiRPHASE and Bass Motion Control (BMC) DSP processing, perfectly tuned for each model, audiences will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available.Power that movesThe most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss.ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels.All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.M-Brace: A new cabinet designA professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure, for greater resistance to mechanical stress.Bass Motion ControlWhen searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.New paradigms in electroacousticsThe advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image. Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.Superior transducersLightweight and powerful, RCF drivers are a true reference for high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components.High frequenciesThe new 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity, enhancing transient response and improving coupling with the low-frequency transducer.Low frequenciesLow-frequency transducer design gains more stability over higher currents, with less distortion, and is highly efficient in terms of heat dissipation. RCF quality control is very strict. Our woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels. Only the best woofer design can fit ART 9.New perspective on linearityRCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

DescriptionART 932-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 3" titanium/neodymium compression driver, 12" woofer - two-channel 2100W amplifier, and the constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 132 dB SPL, distortion-free sound. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing, perfectly tuned for each model, the audience will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available. Power that movesThe most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.M-Brace: a new cabinet designA professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure, for greater resistance to mechanical stress.Bass Motion ControlWhen searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.New paradigms in electroacoustisThe advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image. Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.Legendary transducersSuperior compression driversThe ND840 Compression Driver in pure Titanium with a 3” voice coil allows a crossover point at only 800 Hz. This allows a better impulse response, fast decay, and superior efficiency. Lightweight and powerful, RCF neodymium drivers are a reference in performance and reliability.Potent wooferThe low-frequency transducer is a high-power 12" woofer with a 2.5’’ voice coil that delivers tight, punchy bass. Reproduction of the mid-bass frequencies is accurate, transparent, and free from distortion.New perspective on linearityRCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

DescriptionART 912-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 1.75" compression driver, 12" woofer, two-channel 2100W amplifier, and the constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 130 dB SPL, distortion-free sound. Merging RCF proprietary FiRPHASE and Bass Motion Control DSP processing, perfectly tuned for each model, the audience will experience absolute clarity and deep, powerful bass response. The sleek cabinet uses a special polypropylene composite material with an M-brace internal reinforcement, making it easy to carry and secure to install on a pole, flown-, wall-, or truss-mounted using the multiple rigging points available. Power that movesThe most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 2,100 Watts of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.M-Brace: a new cabinet designA professional appearance of an ART 9 cabinet is ideal for live events or installed applications. The sleek cabinet uses a special polypropylene composite material with a radically new construction concept. The grille cover is heavy-duty steel protecting both transducers and vented ports. The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping even at maximum volume settings. It also performs as a reinforcement structure, for greater resistance to mechanical stress.Bass Motion ControlWhen searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.New paradigms in electroacoustisThe advanced design of ART9 lies within the housing of the speaker. The new True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis, and constant measurement in RCF anechoic chambers. Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image. Acoustically, the TRW waveguide mimics a resonance-free pure resistive load reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.Superior transducersLightweight and powerful, RCF drivers are a true reference for high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components.High frequenciesThe new 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity, enhancing transient response and improving coupling with the low-frequency transducer.Low frequenciesLow-frequency transducer design gains more stability over higher currents, with less distortion, and is highly efficient in terms of heat dissipation. RCF quality control is very strict. Our woofers are tested with a 200 hours continuous signal to stress the transducer at extreme levels. Only the best woofer design can fit ART 9.New perspective on linearityRCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

DescriptionMackie Thrash 1300W loudspeakers are all about no frills, raw power, and reliability without sacrificing sound quality. Built to RockFor those that want to plug in, crank it up, and get down to business, Thrash is the loudspeaker for you. With flexible inputs, lightweight and durable construction, and a wall-shaking 1300W of power, Thrash has what it takes to keep up with every gig, rehearsal, rowdy spelling bee, you name it. 1300W ultra-efficient Class-D amplifier Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading High-performance drivers Straightforward inputs and outputs Pole mount it or use it as a floor monitor Equipped with 4 handles for easy loadingThe Power to PerformIf you are a band that is ready to gig or even upgrade your rehearsal space, Thrash is ready to make it happen. The Sound of RockThrash is voiced to make your voice and instruments cut through in loud basement shows, garage rehearsals, and dusty old venues. No FUSS I/OWant to plug in, crank it, and get playing? Thrash won’t get in your way. Dual XLR/TRS inputs plus a Mix Out are easy and versatile for connecting to your gear. You can even connect a microphone directly into either input when you just need simple vocal reinforcement. Take the HeatWhen things get hot, the automatic thermal limiting within Thrash will keep things in check so you can focus on your performance.Product features: 1300W ultra-efficient Class-D amplifier Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading Frequency response: 52Hz – 20kHz Max SPL: 125dB Flexible inputs and outputs 12” high-performance woofer 1” Titanium compression driver Standard pole mount Equipped with 4 handles for easy loading Dual-angle monitor wedge for use as a floor monitor

Description15” 1300W Powered LoudspeakerMackie Thrash 1300W loudspeakers are all about no frills, raw power, and reliability without sacrificing sound quality.Built to rockFor those that want to plug in, crank it up, and get down to business, Thrash is the loudspeaker for you. With flexible inputs, lightweight and durable construction, and a wall-shaking 1300W of power, Thrash has what it takes to keep up with every gig, rehearsal, rowdy spelling bee, you name it. 1300W ultra-efficient Class-D amplifier Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading High-performance drivers Straightforward inputs and outputs Pole mount it or use it as a floor monitor Equipped with 4 handles for easy loadingThe Power to PerformIf you are a band that is ready to gig or even upgrade your rehearsal space, Thrash is ready to make it happen.The Sound of RockThrash is voiced to make your voice and instruments cut through in loud basement shows, garage rehearsals, and dusty old venues. No FUSS I/OWant to plug in, crank it, and get playing? Thrash won’t get in your way. Dual XLR/TRS inputs plus a Mix Out are easy and versatile for connecting to your gear. You can even connect a microphone directly into either input when you just need simple vocal reinforcement. Take the HeatWhen things get hot, the automatic thermal limiting within Thrash will keep things in check so you can focus on your performance.Product features: 1300W ultra-efficient Class-D amplifier Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading Frequency response: 38Hz – 20kHz Max SPL: 126 dB Flexible inputs and outputs 15” high-performance woofer 1” Titanium compression driver Standard pole mount Equipped with 4 handles for easy loading Dual-angle monitor wedge for use as a floor monitor

Aυτοενισχυόμενο πλαστικό ηχείο 2way, 1x15in, 1x1,4in, 90x60 διασπορά, 50Hz-20KHz,  ισχύς Dynamic: 1000W (LF:800W, HF:200W), Continuous: 465W (LF:400W, HF:65W),  (class-D), με DSP. Κλίση καμπίνας 50ο για χρήση monitor.  Διαθέτει 2 εισόδους, 1xMIC/Line combo XLR, 1x/Line combo XLR/RCA L/R και XLR LINK OUT. Δυνατότητα rigging 2x Bottom, 1xRear, M8, Μax SPL 132dB, διαστάσεις 45.5x70x37.8cm. Βάρος 19.3 Kgr.     ΠΡΟΣΟΧΗ :Η τιμή αφορά Τεμάχιο και όχι Ζεύγος

10-inch Powered PA Speaker with Bluetooth Launched in 1995, JBL’s best-selling EON family of PAs set the benchmark for how great a powered loudspeaker system can be. The JBL EON710 10-inch loudspeaker is part of JBL’s new EON700 Series of powered PAs, which represents a major step forward in innovation and technology by delivering truly intelligible, clearly consistent coverage at any volume level. The EON700 Series leverages the latest acousti c science, transducer designs, cabinet materials and advanced DSP and control technologies to deliver extraordinary performance in a fully professional, highly flexible, easy to use, portable system. With four models available, including the 10-inch EON710, the 12-inch EON712 and the 15-inch EON715 powered PA speakers and the 18-inch EON718S subwoofer, EON700 systems cover the needs of today’s working musicians and sound providers.

12-inch Powered PA Speaker with Bluetooth Launched in 1995, JBL’s best-selling EON family of PAs set the benchmark for how great a powered loudspeaker system can be. The JBL EON712 12-inch loudspeaker is part of JBL’s new EON700 Series of powered PAs, which represents a major step forward in innovation and technology by delivering truly intelligible, clearly consistent coverage at any volume level. The EON700 Series leverages the latest acoustic science, transducer designs, cabinet materials and advanced DSP and control technologies to deliver extraordinary performance in a fully professional, highly flexible, easy to use, portable system. With four models available, including the 10-inch EON710, the 12-inch EON712 and the 15-inch EON715 powered PA speakers and the 18-inch EON718S subwoofer, EON700 systems cover the needs of today’s working musicians and sound providers.

High performance, superior quality and lasting reliability. These are the hallmarks of the QSC brand and the reason why millions of professionals the world-over have come to trust QSC to help them confidently deliver superior experiences and memorable performances. The CP Series follows in that same tradition while also offering an ultra-compact form factor and class-leading value.Features:Compact and powerful performance1000 Watt peak power Class-D amplifier moduleEasily selected contours for commonly-used applicationsAdvanced DSP with Intrinsic Correction™ for superior sound quality and speaker protectionDirectivity Matched Transition™ (DMT) for consistent frequency response across the entire coverage areaLight weight and highly portableProfessional appearance looks great in any applicationUse for main PA, stage monitor, or instrument amplifier35 mm pole socketOptional yoke, tote, and outdoor cover accessoriesComplete EASE and CAD information available online3-Year Warranty*Specifications:LF Driver: 8", coneHF Driver: 1,4" Compression driverFrequency Response (-6 dB): 56 - 20 kHzFrequency Response (-10 dB): 53 - 20 kHzNominal Coverage Angle: 90° AxisymetricMaximum Rated SPL1: 124 dBAmplifier: Class D, Peak: 800 W (LF), 200 W (HF)Controls: Power, 2 x Gain, Mic Boost Push Switch, 6-way Contour Selection SwitchIndicators: Power LED, 2 x Input Signal LED, Input B MIC selected LED, Limiter active LEDConnectors: 2 x locking XLR/F ?” combo (Line Input and Mic/Line input), 1 x 3.5 mm TRS (Stereo Input), 1 x XLR/M (Mix Output), 1 x IEC power connectorEnclosure Material: PolypropyleneAttachment Points: M10 threaded insertColor: Black (RAL 9011)Grille: 18 Gauge powder-coated steelDimensions: 411 x 273 x 256 mmNet Weight: 9,5kgShipping Weight: 11,5kgRegulatory: EMC, UL, CBOptional Accessories: CP8 Tote, CP8 Outdoor Cover, CP8 Yoke

High performance, superior quality and lasting reliability. These are the hallmarks of the QSC brand and the reason why millions of professionals the world-over have come to trust QSC to help them confidently deliver superior experiences and memorable performances. The CP Series follows in that same tradition while also offering an ultra-compact form factor and class-leading value.Features:Compact and powerful performance1000 Watt peak power Class-D amplifier moduleEasily selected contours for commonly-used applicationsAdvanced DSP with Intrinsic Correction™ for superior sound quality and speaker protectionDirectivity Matched Transition™ (DMT) for consistent frequency response across the entire coverage areaLight weight and highly portableProfessional appearance looks great in any applicationUse for main PA, stage monitor, or instrument amplifier35 mm pole socketOptional yoke, tote, and outdoor cover accessoriesComplete EASE and CAD information available online3-Year Warranty*Specifications:LF Driver: 12", coneHF Driver: 1,4" Compression driverFrequency Response (-6 dB): 49 - 20 kHzFrequency Response (-10 dB): 47 - 20 kHzNominal Coverage Angle: 75° AxisymetricMaximum Rated SPL1: 126 dBAmplifier: Class D, Peak: 800 W (LF), 200 W (HF)Controls: Power, 2 x Gain, Mic Boost Push Switch, 6-way Contour Selection SwitchIndicators: Power LED, 2 x Input Signal LED, Input B MIC selected LED, Limiter active LEDConnectors: 2 x locking XLR/F 1/4" combo (Line Input and Mic/Line input), 1 x 3.5 mm TRS (Stereo Input), 1 x XLR/M (Mix Output), 1 x IEC power connectorEnclosure Material: PolypropyleneAttachment Points: M10 threaded insertColor: Black (RAL 9011)Grille: 18 Gauge powder-coated steelDimensions: 516 x 350 x 323 mmNet Weight: 13,7kgShipping Weight: 16,5kgRegulatory: EMC, UL, CBOptional Accessories: CP12 Tote, CP12 Outdoor Cover, CP12 Yoke

AIR10: Versatile, customizable, and easy to transport.Compact and lightweight, AIR12 active loudspeakers provide a rich, extended low-end and natural high-frequency extension in an enclosure that will easily fit in the backseat of a small car. Backed by 1,200W (dynamic) of Class D/Class AB power and enhanced with easy-to-use digital tuning functions, the AIR12 gives you all the power and tools you need for both mobile and installed sound.The best of two worlds.Each type of power amplifier has advantages and disadvantages. By employing different amplifier types for each driver, AIR12 loudspeakers use the respective strengths of Class D and Class A/B amplifiers to provide optimal response throughout the speaker’s frequency range. A 500W (continuous), Class D amplifier powers the 12-inch low-frequency driver, providing efficient, clean power for gut-shaking low end when you need it. A 200W (continuous), Class AB amplifier powers the 1.35-inch high-frequency driver, delivering a natural sounding, "AIR-y" high end. The combination can deliver up to 123 dB SPL of sweet, clear sound between 51 Hz and 20 kHz.Fast and easy customization.The AIR12 loudspeaker is equipped with an easy-to-use signal processor that makes it simple to customize your loudspeakers with the push of a button. Presets customize the AIR12’s response for use as front-of-house mains; as monitor wedges; for music playback (e.g., for DJs); for enhanced low end and a warmer sound; and for improved speech intelligibility. Treble and bass controls let you boost or cut by 10 dB to compensate for room anomalies. Location presets let you optimize performance for stand and bracket mounting as well as flown installations.Versatile mounting for a variety of applications.The AIR12’s molded plastic cabinet can be mounted in several ways, providing tremendous versatility. The multi-angle enclosure sports nonskid rubber feet on the bottom for upright front-of-house use and nonskid rubber feet on one side for stage monitor applications. Rig the speaker using M10 fly points or ground-stack it for portable applications. Mount it on a tripod or atop an AIR-series subwoofer using an optional sub pole. The integrated dual-position pole mount lets you aim the speaker level or at a 7.5˚ downward tilt. And the AIR12 is easy to transport, thanks to its top-mounted handle.You’ll be floored.If you place a loudspeaker against a hard surface such as a wall or floor, the low frequencies emitted from the rear of the enclosure propagate back into the room. This effect, called “half-space loading,” can increase the output of bass frequencies by as much as 6 dB, and it is an unavoidable issue with floor monitors. Most PA speakers in this class simply roll off excess low frequencies with a highpass filter—a half-baked compensation for half-space loading. In contrast, AIR-series full-range loudspeakers offer a Monitor preset that uses DSP to retune the speaker to both compensate for bass buildup and maintain a tight mid-bass response, while suppressing problematic frequencies to reduce feedback.Flexible inputs.AIR-series full-range loudspeakers offer a choice of inputs so you can use them with a variety of sources. You get two combo XLR mic/TRS line inputs, each with a Class A microphone preamplifier and independent gain control. A stereo 1/8” connection admits signals from smartphones, tablets, and other consumer audio devices. These signals can be combined with the AIR12’s internal mixer, and a balanced XLR Mix output lets you send pass the signals to other AIR-series loudspeakers.A sweet-sounding solution.With their “best of both worlds” power-amp configuration, carefully programmed DSP presets, versatile mounting options, flexible inputs with onboard mixing, and other professional features, PreSonus AIR-series loudspeakers are an excellent choice for both mobile and installed sound. You’ll love their easy transportability and their affordability. But the best thing about AIR-series loudspeakers is their clear, natural, “AIR-y” sound. Don’t just take our word for it, though. Check out AIR-series loudspeakers at your favorite PreSonus dealer.Six years of trouble-free performance. Guaranteed.When you choose ULT or AIR loudspeakers, you choose confidence. Rest assured that your new PreSonus speakers are in it for the long haul.We take our build quality seriously, and if anything goes wrong with them in your first six years of ownership (assuming you don't throw them in a swamp or anything like that) the repair or replacement is on us.

AIR10: Versatile, customizable, and easy to transport.Compact and lightweight, AIR10 active loudspeakers provide a rich, extended low-end and natural high-frequency extension in an enclosure that will easily fit in the backseat of a small car. Backed by 1,200W (dynamic) of Class D/Class AB power and enhanced with easy-to-use digital tuning functions, the AIR10 gives you all the power and tools you need for both mobile and installed sound. The best of two worlds.Each type of power amplifier has advantages and disadvantages. By employing different amplifier types for each driver, AIR10 loudspeakers use the respective strengths of Class D and Class A/B amplifiers to provide optimal response throughout the speaker’s frequency range. A 500W (continuous), Class D amplifier powers the 10-inch low-frequency driver, providing efficient, clean low end when you need it. A 200W (continuous), Class AB amplifier powers the 1-inch high-frequency driver, delivering a natural sounding, "AIR-y" high end. The combination can deliver up to 121 dB SPL of sweet, clear sound between 66 Hz and 20 kHz. Fast and easy customization.The AIR10 loudspeaker is equipped with an easy-to-use signal processor that makes it simple to customize your loudspeakers with the push of a button. Presets customize the AIR10’s response for use as front-of-house mains; as monitor wedges; for music playback (e.g., for DJs); for enhanced low end and a warmer sound; and for improved speech intelligibility.Treble and bass controls let you boost or cut by 10 dB to compensate for room anomalies. Location presets let you optimize performance for stand and bracket mounting as well as flown installations. Versatile mounting for a variety of applications.The AIR10’s molded plastic cabinet can be mounted in several ways, providing tremendous versatility. The multi-angle enclosure sports nonskid rubber feet on the bottom for upright front-of-house use and nonskid rubber feet on one side for stage monitor applications.Rig the speaker using M10 fly points or ground-stack it for portable applications. Mount it on a tripod or atop an AIR-series subwoofer using an optional sub pole. The integrated dual-position pole mount lets you aim the speaker level or at a 7.5˚ downward tilt. And the AIR10 is easy to transport, thanks to its top-mounted handle. You’ll be floored. If you place a loudspeaker against a hard surface such as a wall or floor, the low frequencies emitted from the rear of the enclosure propagate back into the room. This effect, called “half-space loading,” can increase the output of bass frequencies by as much as 6 dB, and it is an unavoidable issue with floor monitors. Most PA speakers in this class simply roll off excess low frequencies with a highpass filter—a half-baked compensation for half-space loading. In contrast, AIR-series full-range loudspeakers offer a Monitor preset that uses DSP to retune the speaker to both compensate for bass buildup and maintain a tight mid-bass response, while suppressing problematic frequencies to reduce feedback. Flexible inputs.AIR-series full-range loudspeakers offer a choice of inputs so you can use them with a variety of sources. You get two combo XLR mic/TRS line inputs, each with a Class A microphone preamplifier and independent gain control. A stereo 1/8” connection admits signals from smartphones, tablets, and other consumer audio devices.These signals can be combined with the AIR10’s internal mixer, and a balanced XLR Mix output lets you send pass the signals to other AIR-series loudspeakers. A sweet-sounding solution.With their “best of both worlds” power-amp configuration, carefully programmed DSP presets, versatile mounting options, flexible inputs with onboard mixing, and other professional features, PreSonus AIR-series loudspeakers are an excellent choice for both mobile and installed sound. You’ll love their easy transportability and their affordability.But the best thing about AIR-series loudspeakers is their clear, natural, “AIR-y” sound. Don’t just take our word for it, though. Check out AIR-series loudspeakers at your favorite PreSonus dealer.   Six years of trouble-free performance. Guaranteed.When you choose ULT or AIR loudspeakers, you choose confidence. Rest assured that your new PreSonus speakers are in it for the long haul.We take our build quality seriously, and if anything goes wrong with them in your first six years of ownership (assuming you don't throw them in a swamp or anything like that) the repair or replacement is on us.     Technical Specifications:Acoustic Performance ConfigurationActive 2-wayFrequency Range (-3 dB)66 Hz to 20 kHzFrequency Range (-10 dB)55 Hz to 20 kHzCrossover Frequency2.2 kHzMaximum Output121 dB SPLNominal Dispersion (HxV)90˚x 60˚Transducer LF Driver10” (2” voice coil)HF Driver1” compressionAmplifier Amplifier TypeClass D (LF), Class AB (HF)Total System Power1,200W (Peak)LF Power900WHF Power300WConnections and Controls Inputs2 x XLR/TRS mic/line combo; 1 x 1/8” TRS stereoOutputs1 x XLR Mix Out  

AIR15: Versatile, customizable, and easy to transport.Compact and lightweight, AIR15 active loudspeakers provide a rich, extended low-end and natural high-frequency extension in an enclosure that will easily fit in the backseat of a small car. Backed by 1,200W (dynamic) of Class D/Class AB power and enhanced with easy-to-use digital tuning functions, the AIR15 gives you all the power and tools you need for both mobile and installed sound. The best of two worlds.Each type of power amplifier has advantages and disadvantages. By employing different amplifier types for each driver, AIR15 loudspeakers use the respective strengths of Class D and Class A/B amplifiers to provide optimal response throughout the speaker’s frequency range. A 500W (continuous), Class D amplifier powers the 15-inch low-frequency driver, providing efficient, clean power for gut-shaking low end when you need it. A 200W (continuous), Class AB amplifier powers the 1.35-inch high-frequency driver, delivering a natural sounding, "AIR-y" high end. The combination can deliver up to 124 dB SPL of sweet, clear sound between 47 Hz and 20 kHz. Fast and easy customization.The AIR15 loudspeaker is equipped with an easy-to-use signal processor that makes it simple to customize your loudspeakers with the push of a button. Presets customize the AIR15’s response for use as front-of-house mains; as monitor wedges; for music playback (e.g., for DJs); for enhanced low end and a warmer sound; and for improved speech intelligibility. Treble and bass controls let you boost or cut by 10 dB to compensate for room anomalies. Location presets let you optimize performance for stand and bracket mounting as well as flown installations. Versatile mounting for a variety of applications.The AIR15’s molded plastic cabinet can be mounted in several ways, providing tremendous versatility. The multi-angle enclosure sports nonskid rubber feet on the bottom for upright front-of-house use and nonskid rubber feet on one side for stage monitor applications. Rig the speaker using M10 fly points or ground-stack it for portable applications. Mount it on a tripod or atop an AIR-series subwoofer using an optional sub pole. The integrated dual-position pole mount lets you aim the speaker level or at a 7.5˚ downward tilt. And the AIR15 is easy to transport, thanks to its top-mounted handle. You’ll be floored.If you place a loudspeaker against a hard surface such as a wall or floor, the low frequencies emitted from the rear of the enclosure propagate back into the room.This effect, called “half-space loading,” can increase the output of bass frequencies by as much as 6 dB, and it is an unavoidable issue with floor monitors.Most PA speakers in this class simply roll off excess low frequencies with a highpass filter—a half-baked compensation for half-space loading. In contrast, AIR-series full-range loudspeakers offer a Monitor preset that uses DSP to retune the speaker to both compensate for bass buildup and maintain a tight mid-bass response, while suppressing problematic frequencies to reduce feedback. Flexible inputs.AIR-series full-range loudspeakers offer a choice of inputs so you can use them with a variety of sources. You get two combo XLR mic/TRS line inputs, each with a Class A microphone preamplifier and independent gain control. A stereo 1/8” connection admits signals from smartphones, tablets, and other consumer audio devices. These signals can be combined with the AIR15’s internal mixer, and a balanced XLR Mix output lets you send pass the signals to other AIR-series loudspeakers. A sweet-sounding solution.With their “best of both worlds” power-amp configuration, carefully programmed DSP presets, versatile mounting options, flexible inputs with onboard mixing, and other professional features, PreSonus AIR-series loudspeakers are an excellent choice for both mobile and installed sound. You’ll love their easy transportability and their affordability. But the best thing about AIR-series loudspeakers is their clear, natural, “AIR-y” sound. Don’t just take our word for it, though. Check out AIR-series loudspeakers at your favorite PreSonus dealer.   Six years of trouble-free performance. Guaranteed.When you choose ULT or AIR loudspeakers, you choose confidence. Rest assured that your new PreSonus speakers are in it for the long haul.We take our build quality seriously, and if anything goes wrong with them in your first six years of ownership (assuming you don't throw them in a swamp or anything like that) the repair or replacement is on us.     Technical Specifications:Acoustic Performance ConfigurationActive 2-wayFrequency Range (-3 dB)47 Hz to 20 kHzFrequency Range (-10 dB)40 Hz to 20 kHzCrossover Frequency1.6 kHzMaximum Output124 dB SPLNominal Dispersion (HxV)90˚x 60˚Transducer LF Driver15” (2.5” voice coil)HF Driver1.35” compressionAmplifier Amplifier TypeClass D (LF), Class AB (HF)Total System Power1,200W dynamicLF Power900WHF Power300WConnections and Controls Inputs2 x XLR/TRS mic/line combo; 1 x 1/8” TRS stereoOutputs1 x XLR Mix Out 

SRX812 is a two-way full range passive portable speaker with a 12” woofer made for use as a light-duty main PA, monitor, or rear or side fill. Featuring M10 suspension points and feet for both floor standing and monitor use, the SRX812 is an ideal solution for musicians, bands, and DJs, concert use, public speaking, or installations such as performance venues, corporate spaces, educational facilities or houses of worship. Tunings and presets are available for Crown ITech HD and XTI 2 amps as well as dbx VENU360 signal processors.Features:Premium JBL TransducersTunings available for Crown amps and dbx signal processorsFully supported in Audio ArchitectPower Handling: 3200W Peak, 1600W Program, 800W ContinuousFrequency Range: 41Hz-20kHzFrequency Response: 57Hz-20kHzMax SPL: 135dBCoverage Pattern: 90 x 50Amplification options: Passive/Bi-AmpSpecifications:System Type: Passive 12”, two-way, bass-reflexMaximum SPL Output: 135dBFrequency Range (-10dB): 41hz - 20khzFrequency Response (- 3dB): 57hz - 20khzSensitivity (1W/1m): 95 dBSystem Power Rating: 3200W Peak, 1600W Program, 800W ContinuousNominal Impedance: 8 OhmConnectors: NL4 Input, NL4 Loop-thru (+/-1 or +/-2 Selectable)Operational Modes: Passive/Bi-AmpLF Driver: 2272HHF Driver: 2432HCoverage Pattern: 90 x 50Crossover Frequency: 1.9khzEnclosure Material: 18mm plywoodMonitor Angle: 50°Suspension/Mounting: D

The SRX800 Series is the next generation high performance powered loudspeaker system comprising three full range and two subwoofer models with an array of features that elevate the SRX800 Series to the best in class of all competitive systems. The full range 15" three-way, SRX835P features legendary JBL Drivers, proprietary 2,000 Watt Crown amplification, Crown Front-End DriveCore Technology, premium JBL user-configurable DSP, V5 Tunings compatible with Vertec and VTX touring systems, and HiQnet Network control options via iOS and Android applications. Drawing on JBL’s long history of groundbreaking technology and loudspeaker design, the SRX800 Series meets the needs of touring houses, installations, and the most demanding live sound applications ensuring they can deploy a no-compromise, all-in-one solution featuring legendary JBL sound and performance, a wide array of configurability, and compatibility with JBL’s flagship touring systems.Features:Purposeful Design: Rugged, Intuitive to Use, Easy to TransportJBL Premium TransducersDrivecore Amplification By CrownFull User Configurable DSPNetwork ControlJBL Engineered Application PresetsLCD Screen and Glow in the Dark Ink on Back PanelM10 Suspension PointsStandard 35mm Pole CupSpecifications:System Type: Self powered 15”, three-way, bass-reflexMax SPL Output: 137 dBFrequency Range (-10 dB): 33 Hz - 21 kHzFrequency Response (-3 dB): 41 Hz - 20 kHzCoverage Pattern: 60° x 40°Amplifier Design: Class D

he HD 12-A offers an extremely linear response and a precise, deep low frequency control. The 12” woofer guarantee a superior sound projection indoor and outdoor. It is the ideal speaker for main front of house in small PA systems, for high power monitoring and it is the best solution where higher power is required for various applications in larger venues.Features:1200 WATT PEAK, 600 WATT RMSDigital Bi-ampDSP Sound ProcessingRCF Precision Transducers130 dB MAX SPLSpecifications:Frequency Response -3 dB: 45 Hz ÷ 20000 HzMax SPL: 130 dBHorizontal coverage angle: 90°Vertical coverage angle: 60°Compression Driver: 1", 1.7" voice coilWoofer: 12", 2.5" voice coilTotal power: 1200 W PEAK 

2-way active plastic 12" woofer + driver Specifications:Input Connectors: 2xRCA + 1xJaxk1/4"(AUX)+1xXLR3+2xRCA(LINE).Output Connectors: 2xXLR3.Controls: EQ(Treble-Bass), MIC, Línea, Volumen.Functions: MP3 Player, LCD Display, Remote Control, FM Radio, Bluetooth, USB/SD.Power Output (RMS): 80W.Power (Peak): 150W.Frequency Response: 55 Hz ? 20 kHz.Sensitivity: 94 dB.Max. SPL: 121 dB.Dimensions: 515 x 375 x 325 mm.Weight: 7.8 Kg.

2-way Active loudspeaker with integrated Power amplifier.Specifications:Type: Self powered loudspeakersElements: Woofer 15" + Tweeter 44 mmAmplifier type: Class-HPower handling: 250WFrequency response: 50 Hz - 20 kHzSensitivity: 96 dBMax. SPL: 123 dBDimensions: 470 x 390 x 700 mmWeight: 22 kgInput connectors: XLR3-Jack 1/4" (MIC) - XLR3-RCA (LINE)Output connectors: XLR3-Jack 1/4"Controls: EQ (Treble-Bass), Mic, Line, Main volumeFunctions: MP3 player, LCD display, remote control, FM radio, Bluetooth, USB/SD 

The NX 32-A is an active speaker specifically designed to be the everyday tool for rental companies and professional musicians. It’s one of the most flexible speaker for deploying high-quality sound as a stand-alone FOH system or as a satellite (with subwoofer) but either as a stage monitor or a or a front, down or side fill speaker.RCF speakers are designed using a proprietary and advanced FiR filtering technology, conceived to deliver transparent sound, absolute clarity and perfect stereo images to the listener. The special FiRPHASE filters allow to achieve coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies to the system.Features:1400 W 2-way class-D amplifier131 dB SPL Max50 – 20000 Hz Frequency Range90° x 60° constant directivity coverage12" woofer, 2.5" voice coilHorn loaded 3.0''neodymium c. driverMultiple rigging pointsSpecifications:RCF NX 32-A active speakerPower capacity: Peak: 1400 WMax. SPL: 131 dBFrequency response: 50 Hz - 20 kHzDispersion: 90 x 60°Wofer: 12 in, 3-inch voice coilTweeter: 1.4 in, 3-inch voice coilInput: XLR, jackOutput: XLRCrossover frequencies: 700 HzProtection: thermal, RMSLimiter: soft limiterControls: Volume, Boost, Mic/LineDimensions: 60 x 36.5 x 37.8 cmWeight: 21.1 kg

The NX 45-A is an active speaker specifically designed to be the everyday tool for rental companies and professional musicians. It’s one of the most flexible speaker for deploying high-power and pristine sound as a stand-alone FOH system or as a satellite (with subwoofer) but either as a stage monitor or a front, down or side fill speaker.RCF speakers are designed using a proprietary and advanced FiR filtering technology, conceived to deliver transparent sound, absolute clarity and perfect stereo images to the listener. The special FiRPHASE filters allow to achieve coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies to the system.Features:1400 W 2-way class-D amplifier133 dB SPL Max45 – 20000 Hz Frequency Range90° x 50° constant directivity coverage15" neodymium woofer, 3.5" voice coilHorn loaded 4.0''neodymium c. driverMultiple rigging pointsSpecifications:Frequency Response: 45 Hz ÷ 20000 HzMax Spl @ 1M: 133 dBHorizontal Coverage Angle: 90°Vertical Coverage Angle: 50°Compression Driver: 1.4'' neo, 4.0'' v.cWoofer: 15'' neo, 3.5'' v.cInput Signal: bal/unbalInput Connectors: XRL, JackOutput Connectors: XLRInput Sensitivity: -2 dBu/+4 dBuCrossover Frequencies: 650 HzProtections: Thermal, RMSLimiter: Soft LimiterControls: Volume, Boost, Mic/Line 

The 4PRO 1031-A is a two-way active bass reflex loudspeaker offering extraordinary compact size, high output and vocal fidelity. It provides low distortion and consistent polar response in a flyable lightweight enclosure. The 4PRO 1031-A comprises a 10” woofer and a 1.4” voice coil compression driver that is mounted to a 90° x 60° constant directivity horn.RCF speakers are designed using a proprietary and advanced FiR filtering technology, conceived to deliver transparent sound, absolute clarity and perfect stereo images to the listener. The special FiRPHASE filters allow to achieve coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies to the system.Features:800 WATT PEAK, 400 WATT RMS127 dB max spl90 x 60, Wide dispersion constant directivity horn10" woofer, 2" voice coilSpecifications:Frequency Response -3 Db: 50 Hz � 20000 HzMax Spl: 127 DbHorizontal Coverage Angle: 90°Vertical Coverage Angle: 60°Compression Driver: 1", 1.4" Voice CoilWoofer: 10", 2" Voice CoilInput/output SectionInput Signal: Bal / UnbalInput Connectors: Combo Xlr-jckOutput Connectors: XlrInput Sensitivity: - 2 Dbu / +4 DbuProcessor SectionCrossover Frequencies: 1800 HzProtections: Thermal, RmsLimiter: Fast LimiterControls: Volume, Eq Shape, Mic/lineAmplifier SpecificationsTotal Power: 800 W Peak 

The 4PRO 2031-A is a two-way active bass reflex loudspeaker offering exceptional full range and accurate reproduction. The 12” woofer delivers a fast and accurate reproduction of the midbass frequency range and controlled deep bass while the 1” compression driver offers a very open and natural midrange sound and extreme precision high frequencies reproduction. The 4PRO 2031-A comprises a 12” woofer and a 1.7” voice coil compression driver that is mounted to a 90° x 60° constant directivity horn.RCF speakers are designed using a proprietary and advanced FiR filtering technology, conceived to deliver transparent sound, absolute clarity and perfect stereo images to the listener. The special FiRPHASE filters allow to achieve coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies to the system.Features:1200 WATT PEAK, 600 WATT RMS129 dB max spl90 x 60, Wide dispersion constant directivity horn12" woofer, 2.5" voice coil1" HF driver,1.7" voice coilSpecifications:Frequency Response -3 Db: 45 Hz � 20000 HzMax Spl: 129 DbHorizontal Coverage Angle: 90°Vertical Coverage Angle: 60°Compression Driver: 1", 1.7" Voice CoilWoofer: 12", 2.5" Voice CoilInput/output SectionInput Signal: Bal / UnbalInput Connectors: Combo Xlr-jckOutput Connectors: XlrInput Sensitivity: - 2 Dbu / +4 DbuProcessor SectionCrossover Frequencies: 1700 HzProtections: Thermal, RmsLimiter: Fast LimiterControls: Volume, Eq Shape, Mic/lineAmplifier SpecificationsTotal Power: 1200 W PeakHigh Frequencies: 400 W PeakLow Frequencies: 800 W PeakTotal Power: 600 W Rms​ 

Self-supporting Two-Way, wooden Active Speaker with 12 "woofer and driver,Features:Active speaker seriesMade of plywoodHigh resistance handles35 mm insertionSpecifications:Type: 2-ways Active.Woofer: 12".Driver: 1.34".Impedance: 8ohm.Amplifier power: 400W.Frequency Response: 63 Hz - 20 kHz.Sensitivity: 94 dB.Max. SPL: 121 dB.Input connector :1 x XLR 3.Output connector :1 x XLR 3.Material: MDF.Power supply: AC 230V 50 Hz.Dimensions (W x H x D): 420 x 420 x 660 mm.Weight: 26 kg.

HK Audio LINEAR 3 active speaker cabinets deliver guaranteed top-notch sound for bands and DJs in every scenario. Easy-to-use, rear-mounted controls provide convenient access to presets that shape the response to deliver excellent results in every situation, even without a sound tech on hand.Plenty of headroom, ample power handling, painstakingly matched premium-quality components, robust construction – it all adds up: LINEAR 3 cabinets are true high-end speakers that deliver on the made-in-Germany quality promise.Active 12”/1” cabinet housed in a multipurpose enclosure. The clever design of the LINEAR 3 112 XA allows it to excel as a front PA with plenty of punch, or as an assertive stage monitor.Specifications:Can be used as a mid/high unit or as an onstage monitorPacks the muscular bi-amped punch of a 1,200 W class D power ampBeautifully balanced, high-definition audio135 dB SPL—that"s plenty of sound pressure for audiences of up to 500 (with the suitable L SUB 1500 A or L SUB 1800 A subwoofers)No need for sophisticated audio skills: advanced DSP technology serves up top-notch sound every timeIntelligent Multiband Limiter ensures tonal integrity at every volume levelFIR crossover filtering for transparent midrangePlenty of sound-shaping options with four EQ presets—Bass Boost, Flat (LF), Flat (MHF) and ContourVery low total harmonic distortion, so no listening fatigueSystem"s sound is easy to control and shape, even from the stageOn-target, directional PA aiming to reduce reflections off walls and ceilings 

This active 12”/1” fullrange mid/high unit delivers 1,200 watts of class D power, and functions either as a standalone speaker or in combination with subwoofers from the LINEAR SUB series. Four different EQ presets – Bass Boost, Flat (LF), Flat (HMF) and Contour – allow the LINEAR 3 112 FA to deliver outstanding performance and easy handling in any situation. Specifications:Packs the muscular bi-amped punch of a 1,200 W class D power ampBeautifully balanced, high-definition audio135 dB SPL—that"s plenty of sound pressure for audiences of up to 500 (with the suitable L SUB 1500 A or L SUB 1800 A subwoofers)No need for sophisticated audio skills: advanced DSP technology serves up top-notch sound every timeIntelligent Multiband Limiter ensures tonal integrity at every volume levelFIR crossover filtering for transparent midrangePlenty of sound-shaping options with four EQ presets—Bass Boost, Flat (LF), Flat (MHF) and ContourVery low total harmonic distortion, so no listening fatigueSystem"s sound is easy to control and shape, even from the stageOn-target, directional PA aiming to reduce reflections off walls and ceilings 

This active 15”/1” fullrange mid/high unit delivers 1,200 watts of class D power, and functions either as a standalone speaker or in combination with subwoofers from the LINEAR SUB series. Four different EQ presets – Bass Boost, Flat (LF), Flat (HMF) and Contour – allow the LINEAR 3 112 FA to deliver outstanding performance and easy handling in any situation. Specifications:Packs the muscular bi-amped punch of a 1,200 W class D power ampBeautifully balanced, high-definition audio135 dB SPL—that"s plenty of sound pressure for audiences of up to 500 (with the suitable L SUB 1500 A or L SUB 1800 A subwoofers)No need for sophisticated audio skills: advanced DSP technology serves up top-notch sound every timeIntelligent Multiband Limiter ensures tonal integrity at every volume levelFIR crossover filtering for transparent midrangePlenty of sound-shaping options with four EQ presets—Bass Boost, Flat (LF), Flat (MHF) and ContourVery low total harmonic distortion, so no listening fatigueSystem"s sound is easy to control and shape, even from the stageOn-target, directional PA aiming to reduce reflections off walls and ceilings​

The Bose® F1 Model 812 Flexible Array Loudspeaker is the first powered portable loudspeaker that lets you control its vertical coverage pattern. Simply push or pull the array into position to create “Straight,” “C,” “J” or “Reverse J” coverage patterns. And once set, the system automatically changes the EQ to maintain optimum tonal balance for each coverage pattern. So whether you’re playing at floor level, on a stage, or facing raked seats or bleachers, you can now adapt your PA to match the room.Features:Flex array is a flexible baffle that can be configured into four unique shapes (“Straight,” “C,” “J” or “Reverse J”), allowing the customer to choose the best possible coverage pattern for the applicationVertically oriented 8-driver mid/high line array, with each driver mounted on a custom 100° waveguide, helps deliver wide, consistent coverage12-inch LF driver provides high performance at low frequency for strong low-frequency outputBi-amplified design with 2 high-output, Class-D amplifiers to separately power the FLEX array and 12-inch LF driver2 input channels with independent volume controls and Line Level/Mic switch on Channel 1Applications:Live music performancesBands of all stylesSolo musiciansMobile DJsHouses of worshipSchools and universitiesResorts and hospitality venuesBusiness presentations​​

ELX200-15P features high-efficiency Class-D power amplifiers (up to 1200 W) with integrated QuickSmartDSP, and delivers up to 132 dB SPL utilizing transducers designed and engineered by EV (15-inch EVS-15M woofer coupled with a DH-1C 1-inch titanium compression driver). Powered full-range models allow easy setup via four presets (Music, Live, Speech, Club), sub/top system-match crossovers, three-band EQ, five user-programmable presets (Store and Recall settings), visual monitoring of limiter status, input level control and meters, and master volume control to ensure optimal gain structure.ELX200 powered models are ideal for portable and installed applications, with lightweight and durable polypropylene enclosures, three M10 threaded mounting points and the proven ZLX handle design for easy lifting.The new QuickSmart Mobile wireless control and monitoring application, using Bluetooth® Low Energy (BTLE) technology, allows intuitive system control, configuration and monitoring of up to six powered ELX200 loudspeakers simultaneously. Receive alerts when your system is being overdriven, and control your system while in front of your speakers, not behind. Specifications:Connector Type: (1) Stereo RCA Input, (2) XLR/TRS combo jack, and (1) XLRCoverage (Nominal -6 dB) H: 90°Crossover Frequency: 1600HzEnclosure Material: Polypropylene CompositeFrequency Range (-10 dB): 48 Hz – 19 kHzFrequency Response (-3 dB): 55 Hz – 16 kHzGrille: 18 AWG steel with powdercoatHeight: 710mm (27.95")HF Transducer: DH-1C 1-inch titanium compression driverLF Transducer: EVS-15M 381 mm (15 in)Max. SPL/1m (calc): 132dBPower Consumption: 100 - 240 V~, 50 - 60 Hz, 1.8APower Rating: 1200WPowered or Passive: PoweredShipping Weight: 21.8kg (48.06 lbs)Speaker Type: Full-RangeSuspension: (3) M10 suspension pointsWeight Net: 18.9kg (41.67 lbs)Width: 423mm (16.65")Depth: 384mm (15.12")