Microphone Mounts

Microphone clip mounts a handheld transmitter.

Replacement Clip for Piano

Βασικά χαρακτηριστικά :Κλιπ ασύρματου πομπού GO για ρούχαΤο μαγνητικό κλιπ κρατά τα ρούχα στη θέση τουςΠαρέχει πλήρη ευελιξίαΜετατρέψτε τον ασύρματο πομπό σας GO σε ένα κομμάτι φορητής τεχνολογίας με το RODE MagClip GO, ένα μαγνητικό κλιπ που σας επιτρέπει να τοποθετήσετε τον πομπό σε σχεδόν οποιοδήποτε ρούχο. Στηρίξτε τον πομπό σε γραβάτα, γιακά πουκάμισου και άλλα.

The RODE Stereo Bar is a robust solution for mounting two microphones in a stereo array. With clearly marked spacing of up to 20cm, as well as angle and measurement indicators for ORTF and XY positioning, the RODE Stereo Bar makes it quick and easy to achieve complex recording arrays. The 5/8” mounting threads are supplied with accompanying spacing clips to allow for easy positioning for stacked arrays, and the robust ABS construction makes the Stereo Bar stable and durable, allowing it to easily support the weight of two large diaphragm microphones such as the RODE K2.  

Mic bar with mounts for two mics - can be attached to a mic stand.

Precision stereo microphone positioning made simple, reliable and repeatable The Spacebar microphone positioner allows for precise and repeatable setting of microphone capsule spacing, angle of incidence, and rotation around the x axis.With precision scales for angle and distance engraved on the Spacebar components, it becomes easy to make perfectly measured and repeatable stereo microphone setups. As well as being able to precisely set microphones in standard stereo configurations (i.e. XY, ORTF, NOS, and AB 50cm), the Spacebar allows for exact settings through the entire continuum of angle and spacing.This allows the user to adjust the stereo microphone array and tailor the pickup field to suit virtually any recording environment We highly recommend The Stereophonic Zoom by Michael Williams, a technical paper that provides detailed information on the relationship between angle of incidence, capsule spacing, and the effective angle of the recorded sound field. It is a very useful reference that can greatly increase the flexibility of your stereo microphone techniques.The Stereophonic Zoom can be downloaded from: http://www.microphone-data.com/pdfs/Stereo%20zoom.pdf The Spacebar system is precision fabricated from machined aircraft aluminum, brass, and stainless steel.Each system consists of a center stand clamp, horizontal bar, and microphone holders.The SB-30 and SB-66 are both supplied with two microphone holder assemblies and an additional tall microphone holder. The taller microphone holder body can be used to raise one microphone to avoid interference if the mic spacing requires that the microphone bodies overlap.The Spacebar system comes in two versions – the SB-30 and the SB-66, which provide the following microphone spacing: model minimum spacing maximum spacing SB-30 7cm (2.75”) 26cm (10.2”) SB-66 7cm (2.75”) 61cm (24”) Also available is a hanging bar (SB-HB-30/66) for installations where the positioner is hung from above.This accessory consists of a tube which mounts to the center clamp through which the microphone cable is threaded. This enables the spacebar to be hung by the microphone cable and positioned via side mounted guide wires.See detailed photo here.The Spacebar system is precision fabricated from machined aircraft aluminum, brass, and stainless steel. If properly cared for it will last a lifetime.

Precision stereo microphone positioning made simple, reliable and repeatable The Spacebar microphone positioner allows for precise and repeatable setting of microphone capsule spacing, angle of incidence, and rotation around the x axis.With precision scales for angle and distance engraved on the Spacebar components, it becomes easy to make perfectly measured and repeatable stereo microphone setups. As well as being able to precisely set microphones in standard stereo configurations (i.e. XY, ORTF, NOS, and AB 50cm), the Spacebar allows for exact settings through the entire continuum of angle and spacing.This allows the user to adjust the stereo microphone array and tailor the pickup field to suit virtually any recording environment We highly recommend The Stereophonic Zoom by Michael Williams, a technical paper that provides detailed information on the relationship between angle of incidence, capsule spacing, and the effective angle of the recorded sound field. It is a very useful reference that can greatly increase the flexibility of your stereo microphone techniques.The Stereophonic Zoom can be downloaded from: http://www.microphone-data.com/pdfs/Stereo%20zoom.pdf The Spacebar system is precision fabricated from machined aircraft aluminum, brass, and stainless steel.Each system consists of a center stand clamp, horizontal bar, and microphone holders.The SB-30 and SB-66 are both supplied with two microphone holder assemblies and an additional tall microphone holder. The taller microphone holder body can be used to raise one microphone to avoid interference if the mic spacing requires that the microphone bodies overlap.The Spacebar system comes in two versions – the SB-30 and the SB-66, which provide the following microphone spacing: model minimum spacing maximum spacing SB-30 7cm (2.75”) 26cm (10.2”) SB-66 7cm (2.75”) 61cm (24”) Also available is a hanging bar (SB-HB-30/66) for installations where the positioner is hung from above.This accessory consists of a tube which mounts to the center clamp through which the microphone cable is threaded. This enables the spacebar to be hung by the microphone cable and positioned via side mounted guide wires.See detailed photo here.The Spacebar system is precision fabricated from machined aircraft aluminum, brass, and stainless steel. If properly cared for it will last a lifetime.

Precision stereo microphone positioning made simple, reliable and repeatable The Spacebar microphone positioner allows for precise and repeatable setting of microphone capsule spacing, angle of incidence, and rotation around the x axis.With precision scales for angle and distance engraved on the Spacebar components, it becomes easy to make perfectly measured and repeatable stereo microphone setups. As well as being able to precisely set microphones in standard stereo configurations (i.e. XY, ORTF, NOS, and AB 50cm), the Spacebar allows for exact settings through the entire continuum of angle and spacing.This allows the user to adjust the stereo microphone array and tailor the pickup field to suit virtually any recording environment We highly recommend The Stereophonic Zoom by Michael Williams, a technical paper that provides detailed information on the relationship between angle of incidence, capsule spacing, and the effective angle of the recorded sound field. It is a very useful reference that can greatly increase the flexibility of your stereo microphone techniques.The Stereophonic Zoom can be downloaded from: http://www.microphone-data.com/pdfs/Stereo%20zoom.pdf The Spacebar system is precision fabricated from machined aircraft aluminum, brass, and stainless steel.Each system consists of a center stand clamp, horizontal bar, and microphone holders.The SB-30 and SB-66 are both supplied with two microphone holder assemblies and an additional tall microphone holder. The taller microphone holder body can be used to raise one microphone to avoid interference if the mic spacing requires that the microphone bodies overlap.The Spacebar system comes in two versions – the SB-30 and the SB-66, which provide the following microphone spacing: model minimum spacing maximum spacing SB-30 7cm (2.75”) 26cm (10.2”) SB-66 7cm (2.75”) 61cm (24”) Also available is a hanging bar (SB-HB-30/66) for installations where the positioner is hung from above.This accessory consists of a tube which mounts to the center clamp through which the microphone cable is threaded. This enables the spacebar to be hung by the microphone cable and positioned via side mounted guide wires.See detailed photo here.The Spacebar system is precision fabricated from machined aircraft aluminum, brass, and stainless steel. If properly cared for it will last a lifetime.

Be ready for any situation requiring a shotgun mic—anything from using a boom pole to using a DSLR camera.  Audio Scope Gear is a kit of accessories perfect for the gig bag. The kit contains five different mounting options for DSLR cameras (and other devices with hot-shoe mounts), and mounts for 5/8” x 27 threads (microphone stands and other mounting devices).  Also included are 3/8” inserts for adapting to boom poles and other mounts that have 3/8” studs.Specifications:Shock mount for microphone diameters of 20.8~24mm with 5/8"x27 (15.88mm) threaded insert and 3/8" (9.53mm) threaded insert adapterHot-shoe adapter with 5/8"x27 studHot-shoe mount suspension clip for microphone diameters of 17~30mmHot-shoe shock mount for microphone diameters of 12~30mmSuspension clip for microphone diameters of 17~30mm with 5/8"x27 (15.88mm) threaded insert and 3/8" (9.53mm) threaded insert adapter 

Clip for Drums and more.

Clothing clip, plastic (black). Rotatable microphone position.

Audio Technica  AT8662Intended for use with gooseneck microphones mounted on lecterns, pulpits, conference tables and similar surfacesEffectively isolates microphone from noise, shock and vibration transmitted through the mounting surfaceEliminates pickup of low-frequency resonances caused by mechanical coupling

Audio Technica  AT8405aFits microphones with 21 mm body diameterCompatible with 5/8"-27 threaded stands

Audio Technica  AT8471Provides effective reduction of stand-transmitted noiseDependably maintains positioning while securely holding the microphoneCompatible with 5/8"-27 threaded stands

Audio Technica  AT8459Dual swivels provide unlimited number of positions for exact microphone placementCompatible with 5/8"-27 threaded standsFor use with any microphone using a stand clamp

Shure A400SM Shock Mount for Gooseneck Microphones

Securely attaches a Shure Beta98 to a brass instruments and saxophones 

Drum Mount Kit for SM98

Allows attachment and positioning of Beta 98 and Beta 98A to the side of a drum.

Dual microphone mount for Shure 545 Series, SM57 and Beta 57A.

Quick-release microphone mounting accessory for versatile and secure placement and removal.

Belt clip and protective skin for UR3 Plug-on Wireless Microphone Transmitter. 

The PG1 Cold Shoe Pistol Grip is a convenient and ergonomic way to operate your RØDE VideoMic or Stereo VideoMic independently of your video camera 

Stand mount for ΝΤ-2Α, ΝΤ-1000, ΝΤ-2000, ΝΤΚ, Κ2, Classic II, BroadCaster microphones

The Shure A25D is a break resistant microphone clip that securely mounts the SM58, SM57, SM87A, Beta 87A, Beta 87Cand all other microphones with 3/4-inch and larger handles to a standard microphone stand.

The Shure A57F Microphone Clip is a break resistant microphone clip that securely mounts Shure models KSM137, KSM141, SM63, SM63L, SM63LB, SM81, VP64A, VP64AL, MX412, MX418, MX412S, MX418S, MX412SE, and MX418SE to standard microphone stands. The A57F is the replacement for the discontinued A57D.

Clip for Bass and more

Use the Shure A50D to mount a microphone onto a drum. A screw on the mount secures the microphone, and an adaptive brass washer (european insert) is available to accommodate an even wider range of microphone models. The flexible, yet sturdy, rubber construction provides stability and ease of installation.

Cello microphone holder for DPA 4099 Cello microphone, black

Violin holder for DPA 4099 microphone, black