. go to top icon

Audio Technica ATW-11

SKU: APA2022-00207
  • 36  Instalments
  • 2 years warranty
    2 Years Warranty
  • 36  Instalments
  • 2 years warranty
    2 Years Warranty
188 
Upon Order
Add to cart
apa support icon
NEED HELP?

Our expert engineers can assist you!

guide image
ONLINE GUIDE

Read our buyer's guide for Μικρόφωνα

At-One Beltpack System

ATW-11 AT-One Beltpack System - Simple to set up and use, 2 x 4 channel frequency plan for enhanced flexibility Rack mountable for easy installation and Intuitive receiver and transmitter controls.

Atw-11 The At-One Entry Level Uhf System, The Best Equipped On The Market

AT-One, Audio-Technica’s entry level UHF wireless system. With a 2 x 4 channel frequency plan for enhanced flexibility, sturdy but stylish build quality and a simple user interface, AT-One is ready to become your perfect wireless companion.

AT-One is designed with simplicity and ease-of-use in mind. Equipped with a practical carrying case, rack-mount kit and detachable antennae, AT-One is the perfect balance of price and performance, ideal for those looking for accurate, reliable performance at an entry level price. The AT-One’s frequency plan is divided into two groups with 4 available channels in each group split between the Europe wide license free frequency range and the LTE duplex gap. Users can choose up to 4 channels within one group.

Available in three configurations, AT-One can be purchased with a beltpack or handheld transmitter. The ATW-11 comes equipped with a sturdy, discreetly designed beltpack, providing 10mW RF output power, damping switch and a battery life of 10 hours.

  • Designed for quick and easy use
  • Perfect balance between price and performance, the AT-One is ideal for those looking for reliable results at low prices
  • The frequency plan of AT-One is divided into two groups with 4 channels available in each group, one in the range of authorized European frequencies and the other in the duplex Gap
  • Users can choose up to 4 channels in a group
  • The ATW-11 system is equipped with a discreet and robust pocket transmitter
  • RF transmission power 10mW
  • The bodypack transmitter has a 4-pin HRS connector, which is able to connect to all Audio-Technica wireless microphones
  • Up to 10 hours' battery life with 2 x 1.5V AA batteries
  • RF Indicator light
  • Robust construction from high quality components
  • Delivered in a transport case with a rack mount kit and detachable antennas

“2 X 4 Channels”

AT-One's frequency plan is divided into two groups, each with 4 channels available, one in the range of authorized European frequencies and the other in the duplex gap. Users can choose up to 4 channels in a group.

“rf light indicator”

The display on the half-rack receiver clearly indicates both the RF and AF levels.

“12v power”

The ATW-R1 receiver delivers a voltage of 12V / 100 mA for powering an ATW-B80 booster antenna, active splitters, an antenna combiner or any other active component.

Delivered in a case

The AT-One comes with an ATW-R1 receiver, an ATW-T1 pocket transmitter, detachable antennas, a rack-mount kit, and a power supply, all in a hard carrying case.

Easy to use

The AT-One has been conceived and designed for quick and easy use. Simply open the carrying case, connect, and your UHF wireless system is immediately operational.

Hrs connector

The ATW-T1 bodypack transmitter (included) is equipped with a 4-pin HRS connector, so you can plug in any Audio-Technica wireless microphone, as and when required.

Removable antennae

The antennae of the AT-One wireless system are detachable, which alternatively allows remote operation via a single BNC cable.

Specifications
  • Operating Frequencies F-Band: 824 - 831 MHz, 863 - 865 MHz

  • Modulation Mode FM
  • Frequency Response: 60 Hz - 16 kHz
  • Frequency Stability +/- 0.005%, Phase lock loop frequency control
  • Operating Range 60m, typical
  • Number Of Channels 2 x 4 frequencies

Body Pack

  • RF Power Output: 10 mW
  • Battery Life 10 hours - depending on battery type and use pattern
  • Battery Type Two 1.5V AA alkaline (not included)
  • Dimensions 66 mm x 98 mm x 22 mm (W x H x D)
  • Input Connections Pin 1: GND, Pin 2: INST, Pin 3: Mic, Pin 4: DC Bias +10V
  • Spurious Emissions Following national regulations

Receiver

  • Receiving System Antenna switching diversity
  • Image Rejection: 55dB minimum
  • Sensitivity :10dBµV (S/N 60dB @ 20 kHz deviation)
  • Maximum Output Level Mic / Line (0 / -20dB)
  • Antenna Input BNC type, 50 - BIAS voltage 12V DC 100mA each
  • Dimensions: 200 mm x 42 mm x 122 mm (W x H x D)
  • Weight: 418 g without accessories
  • Accessories Included AC Adapter, Antennas, Rack mount adapter, protective carrying case
  • Audio Output Balanced: 4dBV
  • Audio Output Unbalanced: -2dBV
  • Dynamic Range HH: 108 dB, BP 103 dB (@ max deviation)
  • Output Connectors (Instrument) Unbalanced: 6.3 mm mono jack
  • Output Connectors (Microphone) Balanced: XLRM-type
  • Total Harmonic Distortion: <1% - 20 kHz deviation @ 1 kHz
Write your Review

How would you rate this product?