In Wall Speakers

Elipson Infinite 14 (each)The Elipson Infinite 14 built-in speaker was designed for home cinema. It is a powerful 2-way model, usable as a main, central, surround or ceiling speaker for listening in Dolby Atmos and DTS:X. It is intended to be associated with the Elipson Infinite S12 subwoofer .Elipson Infinite 14: a complete rangeWith the speakers in the Elipson Infinite range, Elipson offers a complete range for home cinema integration. The Elipson Infinite 8 and Elipson Infinite 14 speakers can be fixed to the wall (on wall) or built into a partition (in wall), as can the Elipson Infinite S12 passive subwoofer. The latter are ideally complemented by the Elipson Infinite INF6 and Elipson Infinite INF8 speakers designed for in-ceiling installation for the reproduction of Dolby Atmos, DTS:X or Auro 3D tracks. All the speakers in the Elipson Infinite range benefit from numerous exclusive technologies to meet the requirements of cinema, while maintaining very high visual discretion. The use of identical technologies on all Elipson Infinite speakers also ensures perfect tonal consistency. Elipson Infinite 14: 17 cm speakers The Elipson Infinite 14 cinema speaker is equipped with speakers that are new to the French manufacturer. There are two 17 cm speakers with Rohacell and carbon membranes, very rigid to resist deformations at high volume. The tweeter is a 29 mm ring-type model, capable of handling high power and reaching very high frequencies. Elipson has chosen a closed load, which optimizes the transient regime of the speaker and promotes a harmonious connection with a subwoofer. The Elipson Infinite 14 cinema speaker responds in frequency from 60 Hz to 30 kHz and has a sensitivity of 91 dB /W/m. Its admissible power of 150 W (double in peak) qualifies it for small cinema rooms as well as large ones.The Elipson Infinite 14 speaker combination requires only 11 cm of recess depth and comes with an acoustic grille.HighlightsImmersive and precise soundPower HoldExclusive speakersDolby Atmos and DTS:X compatible

Elipson Infinite S12The Elipson Infinite S12 subwoofer is a built-in model, designed for home cinema rooms and optimized for the Elipson Infinite 8 and Elipson Infinite 14 speakers. A bass-reflex model, it is equipped with a powerful 30 cm speaker.Elipson Infinite S12: a complete rangeWith the speakers in the Elipson Infinite range, Elipson offers a complete range for home cinema integration. The Elipson Infinite 8 and Elipson Infinite 14 speakers can be fixed to the wall (on wall) or built into a partition (in wall), as can the Elipson Infinite S12 passive subwoofer. The latter are ideally complemented by the Elipson Infinite INF6 and Elipson Infinite INF8 speakers intended for in-ceiling installation for the reproduction of Dolby Atmos, DTS:X or Auro 3D tracks. All the speakers in the Elipson Infinite range benefit from numerous exclusive technologies to meet the requirements of cinema, while maintaining very high visual discretion. The use of identical technologies on all Elipson Infinite speakers also ensures perfect tonal consistency. Elipson Infinite S12: 30 cm speaker With the Elipson Infinite S12 built-in subwoofer, Elipson offers a practical solution for reproducing low frequencies in a home cinema room. Passive, this subwoofer requires the use of an amplifier to operate. Its admissible power is high, with 500 W continuous and double in peak point. Elipson has chosen a 30 cm speaker, loaded in bass-reflex with two circular front vents. Thus, thanks to a volume of around a hundred liters, the subwoofer reaches the low frequency of 28 Hz, with an attenuation of 3 dB compared to the high-bass register.Elipson Infinite S12: on wall or in wall The Elipson Infinite S12 subwoofer requires a recess depth of 22 cm and has a solid satin-finish aluminium front panel. It can be installed in a partition wall and behind a transonic screen, without compromising its performance.For large rooms (> 50 m2) or those equipped with a large number of speakers (Atmos for example), the use of several Elipson Infinite S12 subwoofers is recommended.HighlightsFrequency response30 cm HPBass reflex

The Elipson Infinite 8 surround speaker is a 2-way model featuring a sealed enclosure. Designed to be placed on or in a wall or ceiling, it handles the immersive surround sound effects associated with Dolby Atmos and DTS:X technologies.Since the speaker's box is compact and not very deep, it is discreet and easy to install. The satin black and brushed metal finish adds to its charm and discretion.The Elipson Infinite 8 is equipped with a 17 cm Rohacell® and carbon fiber mid-low driver. The 29 mm tweeter features a silk dome and ring.Very energetic, these speakers offer a frequency response ranging from 75Hz-30kHz for an output power of 100W RMS. Consequently, they can receive a signal at high volume.They are perfect for a dedicated home cinema installation. Powerful, energetic and very clear, they offer an incredibly intense listening experience.

Elipson INF IW8 (the part)The Elipson INF IW8 in-wall speaker is a wall-mounted model. It has the same features as the Elipson INF IW6 in a larger format, allowing it to accommodate a larger midrange/bass speaker, to go lower in frequencies and to admit up to 130 watts of power. The Elipson INF IW8 in-wall speaker (2-way) can be powered by the majority of hi-fi and home cinema amplifiers on the market that support speakers with an impedance of 8 ohms.Carbon fiber and PMI foamThe Elipson INF IW8 built-in speaker incorporates a 20 cm diameter midrange/bass driver. It is adorned with a carbon fiber and polymethylacrylamide (PMI) foam membrane. This alloy allows the speaker to be both rigid and very light. It thus comes to life more easily, while maintaining perfect control to reproduce the frequencies entrusted to it as precisely as possible. Thus, the Elipson INF IW8 built-in speaker is capable of going down to 45 Hz without distortion.Adjustable titanium dome tweeterThe high frequencies of the Elipson INF IW8 in-ceiling speaker are entrusted to a 25 mm diameter titanium dome tweeter. It benefits from the technology already proven on the Elipson Infinite INF8 ceiling model . This offers an excellent rise in the treble up to 30 kHz. It can be oriented more than 35 ° in all directions, thus ensuring optimal perception of the music and the slightest effects, regardless of the location of the speaker in the room.Ideal for hi-fi and home cinemaThe Elipson INF IW8 built-in speaker offers a sensitivity of 89 dB for a maximum admissible power of 130 watts. Indeed, it is intended for both the diffusion of background music and for hi-fi or home cinema use, as a front speaker (left, central and right channels) or surround. It guarantees a rich and detailed sound reproduction on all registers to offer you a unique immersive experience.Easy integrationThe Elipson INF IW8 built-in speaker comes with its ready-to-paint magnetic grille. This ensures a harmonious visual integration into your space to blend into the wall. Lightweight and compact, it fits into the partition of the living room or a dedicated room to offer you an even more immersive home cinema or hi-fi experience.In summary, the Elipson INF IW8 built-in speaker improves on the design of the Elipson IW8 model thanks to new, more efficient speakers. It covers a wider frequency response and guarantees rich and detailed sound reproduction. Its integration into the wall is as simple as it is harmonious.

Elipson INF IW6The Elipson INF IW6 in-wall speaker is an improved version of the Elipson IW6 . It retains its main features while extending the frequency response thanks to new speakers. This 2-way model can be powered by the majority of hi-fi and home cinema amplifiers on the market that support speakers with an impedance of 8 ohms.Carbon fiber and PMI foamThe Elipson INF IW6 built-in speaker incorporates a 16 cm diameter midrange/bass driver. It is fitted with a carbon fiber and polymethylacrylamide (PMI) foam membrane. This alloy allows the speaker to be both rigid and very light. It thus comes to life more easily, while maintaining perfect control to reproduce the frequencies entrusted to it as precisely as possible. Thus, the Elipson INF IW6 built-in speaker is capable of going down to 60 Hz without distortion.Adjustable titanium dome tweeterThe high frequencies of the Elipson INF IW6 in-ceiling speaker are entrusted to a 25 mm diameter titanium dome tweeter. It benefits from the technology already proven on the Elipson Infinite INF6 ceiling model . This offers an excellent rise in the treble up to 30 kHz. It can be oriented more than 35° in all directions, thus ensuring optimal perception of the music and the slightest effects, regardless of the location of the speaker in the room.Ideal for hi-fi and home cinemaThe Elipson INF IW6 built-in speaker offers a sensitivity of 88 dB for a maximum admissible power of 100 watts. Indeed, it is intended for both the diffusion of background music and for hi-fi or home cinema use, as a front speaker (left, central and right channels) or surround. It guarantees a rich and detailed sound reproduction on all registers to offer you a unique immersive experience.

The Elipson IW6 in-wall speaker is part of the Architect IN range, a collection of visually discreet audio system components. This 2-way compact speaker is compatible with most hi-fi amplifiers and home theater receivers on today's market. It handles immersive, multichannel formats while adding a vertical dimension to your home theater installation.The in-ceiling speakers in Elipson's IN range have been designed for both private and public spaces. They are a testament to Elipson's commitment to offering breathtaking audio quality. The IW6 may be used in a variety of settings: conference rooms, shopping malls, amphitheatres, restaurants, stores, hotels, offices, private screening rooms, schools, private home theaters, integrated hi-fi systems...The Elipson IW6 in- wall speaker features a 2-way low-mid driver (16.5 cm) composed of cellulose fiber and two silk dome tweeters (19 mm) which can be adjusted in order to direct sound waves toward the listening area. The speaker's white, magnetic grille can be painted to ensure perfect integration with your interior decor.The IW6 speaker has a sensitivity rating of 87 dB and a maximum power handling of 100 W. With a frequency response ranging from 68 Hz to 20 kHz, this model is an ideal surround speaker solution for a home theater installation.

Elipson IW8 (each)The Elipson IW8 in-wall speaker is the highest performing in-wall speaker in the Elipson Architect In series speaker range . This 2-way model can be powered by the majority of hi-fi and home cinema amplifiers on the market that support speakers with an impedance of 8 ohms.The speakers in the Architect In series range from the French manufacturer Elipson are designed for integration into walls and ceilings. Intended for both communities and individuals, they are developed with the same quality requirements as traditional Elipson speakers . The Elipson IW8 built-in speaker can therefore be used for many applications: conference rooms, shopping centers, amphitheaters, restaurants, stores, hotels, professional premises, schools, high schools, private home cinema rooms, integrated hi-fi systems, etc.The Elipson IW8 built-in speaker is a 2-way model equipped with a 20 cm diameter mid-bass speaker with a cellulose fibre cone and a 25 mm diameter silk dome tweeter. This can be oriented to optimise sound diffusion towards the listening area, regardless of the position of the speaker. Practical, the magnetic grille can be painted for perfect integration.The Elipson IW8 built-in speaker offers a sensitivity of 87 dB for a maximum admissible power of 125 watts. Its frequency response extends from 55 Hz to 20 kHz, which makes it suitable for both background music and hi-fi or home cinema use, as a front speaker (left, central and right channels) and surround back. In hi-fi as in home cinema, the association with a subwoofer is strongly recommended to benefit from a more generous base in the bass.

The Elipson IW14C in-wall speaker belongs to the Elipson Architect In series range of wall speakers  . This 2-way model can be powered by the majority of hi-fi and home cinema amplifiers on the market, supporting speakers with an impedance of 8 ohms.The speakers in the Architect In series range from the French manufacturer Elipson are designed for integration into walls and ceilings. Intended for both communities and individuals, they are developed with the same quality requirements as traditional Elipson speakers . The Elipson IW14C built-in speaker can therefore be used for many applications: conference rooms, shopping centers, amphitheaters, restaurants, stores, hotels, professional premises, schools, high schools, private home theaters, integrated hi-fi systems, etc.The Elipson IW14C built-in speaker is a 2-way model equipped with two 14 cm diameter mid-bass speakers with cellulose fiber cones and a 25 mm diameter silk dome tweeter. This can be oriented to optimize sound diffusion towards the listening area, regardless of the position of the speaker. Practical, the magnetic grille can be painted for perfect integration.The Elipson IW14C built-in speaker offers a sensitivity of 87 dB for a maximum admissible power of 100 watts. Its frequency response extends from 75 Hz to 20 kHz, which makes it suitable for both background music and hi-fi or home cinema use, as a front speaker (left, central and right channels) and surround back. In hi-fi as in home cinema, the association with a subwoofer is strongly recommended to benefit from a more generous base in the bass.

Bass that's heard, but not seenThere's something to be said for simplicity when it comes to high-end audio. If you prefer your listening room's décor on the leaner side, consider installing the Bowers & Wilkins ISW3. This passive subwoofer offers high-quality bass from behind your wall or ceiling — all you'll see in your room is a non-assuming air vent.The ISW3 passive subwoofer offers both in-wall and in-ceiling installation options.Twin woofers offer tight, responsive bassThe old adage of "two is better than one" can be applied to subwoofers. I personally prefer the performance of two smaller drivers that combine to move more air than a single larger woofer can on its own. The resulting tight, responsive bass is terrific for music and movies alike.The ISW3 employs two 6-1/2" hybrid paper/aramid fiber cones to deliver punchy, accurate bass. It's an excellent choice for your in-wall home theater or stereo music system in a small- to medium-sized room. Ideal for new construction or renovationsThe ISW3's in-wall enclosure is designed to install between two 16" on-center studs or joists before your wall or ceiling goes up. Its paintable grille is all you'll see in your room once the installation is complete.Requires a separate subwoofer amplifierThis sub needs to be powered with an external subwoofer amplifier, which you'll connect to your home theater receiver or pre-amp/processor. You'll use in-wall speaker wire to connect the ISW3 subwoofer to your amp of choice.A rich history of audio excellenceFounded in England in the 1960s, Bowers & Wilkins is known worldwide for their innovative hi-fi speaker designs and their premium headphones. Crutchfield is proud to offer a diverse selection of products from this legendary audio brand.

Invisa Signature Point Source (SPS) speakers oer excellent performance when used as front left, right, or center-channel loudspeakers, as well as side- or rear-surrounds in high-quality multi-channel home theater and music systems. Invisa SPS speakers also oer superb quality in simpler two-channel systems. Each Invisa SPS incorporates four 5-1/4" high-denition cast-basket drivers and a High-Gauss Reference High Velocity Folded Ribbon Tweeter, similar to the units found in the award-winning Triton towers. The sophisticated crossover network uses the same fully balanced topology as in our upper range models, with a polystyrene lm capacitor in the high-frequency section. In order to achieve a point source radiation pattern with the dramatic benets of better dispersion and improved imaging, the four 5-1/4" drivers are neither identical nor do they cover the same frequency range. Other important details include: a switch to allow adjustment of the tweeter level, a magnetically attached low-prole grille, nonresonant mineral-lled frame structure, special dog-screws to allow easy and secure attachment to the wall, and a rotatable tweeter to allow for correct orientation of the tweeter for vertical or horizontal positioning. Also available is a unique optional backbox that has been engineered to prevent sound from bleeding through into the adjacent room.

Το 100IW6 είναι ένα ηχείο οροφής, ειδικευμένο στη διανομή εκπληκτικής ποιότητας ήχου σε οικιακό περιβάλλον. Κατασκευασμένο για χώρους μικρής- μεσαίας έκτασης μπορεί να χρησιμοποιηθεί σε κατανεμημένα συστήματα (διαδρόμους, σαλόνια), στερεοφωνικά συστήματα (υπνοδωμάτια, κουζίνες) καθώς και σε συστήματα Home Cinema.Το προϊόν είναι κατάλληλο για κάθε δωμάτιο του σπιτιού, ακόμη και σε υγρά περιβάλλοντα όπως μπάνια.Αυτό το ηχείο τοίχου έχει ένα νέο ρυθμιζόμενο tweeter με ανεστραμμένο αλουμινένιο θόλο, πιο συμπαγές βελτιώνοντας τη διασπορά του ήχου. Είναι επίσης εξοπλισμένο με νέο κώνο Polyglass (61/2 "- 16,5 cm). Ένας διακόπτης δύο θέσεων επιτρέπει την ρύθμιση των υψηλών και των μεσαίων- χαμηλών συχνοτήτων για καλύτερη ακουστική απόδοση.Η σειρά 100 φέρνει με ευκολία μία απροσδόκητη μουσικότητα στο σπίτι σας. Ο συνδυαμός νέας τεχνολογίας, αποδοτικού σχεδιασμού, ιδανικών χαρακτηριστικών και λειτουργικότητας σε αυτή τη τιμή θα σας εκπλήξει.Χαρακτηριστικά:Type in-wall 2-wayDrivers 61/2" (16,5cm) Polyglass Midbass. 1" (25mm) AI inverted dome TweeterSensitivity (2.83V/1m) 89dBFrequency response (+/-3dB) 60Hz-23kHzLow frequency point (-6dB) 48HzNominal impedance 8ΏMinimal impedance 7,2ΏRecommended amplifier power 25-120WExternal dimensions (Ø/Depth) 1147/64"x743/64"x35/8 (298x195x92mm)Cut-Out diameter 103/4"x611/16" (273x170mm)Depth from wall 415/32" (88mm)Net weight (with front grille) 4,1lbs (1.85kg)Packing dimensions (WxDxH) 131/2"x929/64"x461/64" (343x240x126mm)Total weight (with packaging) 4.98lbs (2.25kg)

The largest model for wall installation is the Signature IWT 262, which features two 16 cm woofers and a tweeter. The heavy-duty built-in speaker is ideal for use in a demanding stereo environment or as a front speaker (L/C/R) in a home cinema setup. Thanks to its balanced dispersion properties, it can be used in both a vertical and horizontal configuration. The latter version makes it perfect for installation underneath projector screens and flat screen TVs. A rather low installation depth of just 100 mm ensures an uncomplicated installation process, even in rooms where space is at a premium. The treble level can be adjusted in three stages, which allows the sound to be adapted to different room acoustics. HIGHLIGHTS Elaborate phase-optimized crossover with 3 settings for the tweeter level Designed for installation in drywalls (no housing required) or in closed volumes (30 liters or more) 6fold clamping mechanism for very easy and robust installation in surfaces of up to 30 mm thickness Removable magnetic metal grill with fine perforations and very slim design for an elegant appearance Gold-plated push terminals for cables with cross-sections of up to 6 mm² Klippel®-optimized speaker drivers for high efficiency and maximum level Large high-end fabric dome with protective diffusor for excellent dynamics and harmonic coupling to the woofer-midrange Woofer-midrange with powerful drive system and 3-layer aluminium/ceramic sandwich cone for deep bass reproduction and highest sound precision Durable long-throw rubber surrounds for linear operation of the woofer-midrange drivers to handle even large cone excursions Woofer-midranges with magnet protection cover to prevent any damage and undesirable background noise

2 way High-End in-wall/in-ceiling loudspeaker. This built-in wall loudspeaker with particularly high-quality workmanship follows all the major parameters of Magnat´s Quantum technology. Just like the classic home-audio boxes, the IWQ 82 has also been equipped with bass/mid-range cones made from highly stable and torsion-resistant ceramic-aluminium. This material provides extremely accurate reproduction and reveals even the finest of acoustic details. All the high frequencies are reproduced through a coated fabric dome tweeter that delivers highest pulse fidelity and freedom from distortion. A complex crossover is also responsible for precisely distributing the high and low frequencies. Highlights High-End in-wall/in-ceiling loudspeaker Loudspeaker Drivers Tweeter with Swivel technology (can be turned by 35°)

The compact version for wall installation is the IWT 162, which features one woofer and a tweeter, yet still ensures a full-blooded sound. The 16 cm woofer with its aluminum/ceramic cone and a tweeter with coated fabric dome cater for the full frequency range down to 32 Hz. The treble level can be adjusted in three stages here as well, thereby enabling a wide range of installation positions. Measuring 320 x 220 mm with a mounting depth of 102 mm, the Signature IWT 162 doesn´t pose any problems during installation. It doesn´t require a special housing and is perfectly accommodated in any drywall and from a volume of 20 liters. The IWT 162 is suitable for use as a front speaker, as a fully-fledged front channel in a home cinema setup, as well as a luxurious rear channel speaker. Highlights Designed for installation in drywalls (no housing required) or in closed volumes (30 liters or more) Elaborate phase-optimized crossover with 3 settings for the tweeter level 6fold clamping mechanism for very easy and robust installation in surfaces of up to 30 mm thickness Removable magnetic metal grill with fine perforations and very slim design for an elegant appearance Durable long-throw rubber surrounds for linear operation of the woofer-midrange drivers to handle even large cone excursions Woofer-midranges with magnet protection cover to prevent any damage and undesirable background noise Large high-end fabric dome with protective diffusor for excellent dynamics and harmonic coupling to the woofer-midrange Woofer-midrange with powerful drive system and 3-layer aluminium/ceramic sandwich cone for deep bass reproduction and highest sound precision Klippel®-optimized speaker drivers for high efficiency and maximum level Gold-plated push terminals for cables with cross-sections of up to 6 mm² Cabinet Surface:  white

2-way recessed speaker The IW 810 is the larger of two strong-sounding built-in loudspeakers in the Interior series. As with all models in the series, the bass/mid-range cone has been manufactured from a carbon-glass-fibre mix – which guarantees extremely high stability and a very clear and dynamic sound. A 25 mm fabric dome tweeter – which may be adjusted horizontally and vertically – has been fitted into the front. Which means that the emitted sound may be perfected to suit even very different room conditions. A sophisticated fastening system allows the loudspeaker to be quickly installed with extreme ease. Highlights High-End in-wall/in-ceiling loudspeaker Simple mounting with special mechanism Crossover High quality crossover with APOC Switchable tweeterlevel Connections Massive connecting terminal Loudspeaker Drivers Tweeter is switchable for best performance Tweeter with 25 mm aluminium dome and strong neodymium drive Woofer and midrange with carbon fibre cone and phase plug Cabinet Surface:  white

The IC 610 is the smaller of two strong-sounding built-in loudspeakers in the Interior series. As with all models in the series, the bass/mid-range cone has been manufactured from a carbon-glass-fibre mix – which guarantees extremely high stability and a very clear and dynamic sound. A 25 mm fabric dome tweeter – which may be adjusted horizontally and vertically – has been fitted into the front. Which means that the emitted sound may be perfected to suit even very different room conditions. A sophisticated fastening system allows the loudspeaker to be quickly installed with extreme ease. Highlights High-End in-wall/in-ceiling loudspeaker Simple mounting with special mechanism Crossover High quality crossover with APOC Switchable tweeterlevel Connections Massive connecting terminal Loudspeaker Drivers Tweeter is switchable for best performance Tweeter with 25 mm aluminium dome and strong neodymium drive Woofer and midrange with carbon fibre cone and phase plug Cabinet Surface:  white

Enjoy bold sound for TV, music, and more with Sonos In-Wall by Sonance. Power these wired speakers with Amp for the full Sonos experience, including custom Trueplay™ tuning.

The closed-back and bi-amplifier 1000 IWLCR Utopia loudspeaker deliver unrivalled sound quality. It will do so unobtrusively thanks to its magnetic grille, which comes ready to paint to suit your home’s interior. Made in France, its four subwoofers with their ‘W’ cone, combined with the Beryllium tweeter and two midranges with their ‘M’-shaped ‘W’ cones, deliver sound with absolute purity and finesse. In addition, thanks to the midrange-treble plate in the d'Appolito configuration, and with different options for the speaker driver settings, you can customise the entire system to suit your listening room. Offering the best performance for left, central or right use, 1000 IWLCR Utopia is the Home Cinema installation without compromise. It picks up minute sound details in your films, as well as your stereo music listening sessions. For the ultimate installation, the 1000 IWSUB Utopia subwoofer has been specially designed to be assembled with the 1000 IWLCR Utopia and to offer exceptional bass. On a single amplification channel, you can have one 1000 IWLCR Utopia loudspeaker combined with as many 1000 IWSUB Utopia subwoofers as you wish. Your imagination is the only limit to the assembly options. Utopia, A Focal masterpiece and global hi-fi reference.

The 1000 IWLCR6 closed-back loudspeaker is installed in your walls for a high-performing Home Cinema configuration. Made in France, it is equipped with the best speaker drivers and tweeters Focal engineers have ever developed: ‘W’ cone speaker drivers, pure Beryllium tweeter but also a passive radiator for acoustics without compromise. Thanks to its sophisticated design and its adjustable, rotating midrange-treble plate, the listening point is perfectly targeted. The tweeter level can also be set so that it adjusts to your listening room. In addition, this in-wall loudspeaker is suited to several types of application: central, left and right channel. Finally, the ready-to-paint magnetic grilles supplied with the product ensure it is completely unobtrusive. This 1000 Series range of loudspeakers embodies Focal excellence for the most sensational—and discreet—listening experience.

In-Wall HI-FI Sound The 1000 IW6 closed-back loudspeaker offers a truly compact and invisible alternative to a traditional indoor acoustic installation. Thanks to its high-quality sound performance, it is the obvious choice for a Home Cinema system, particularly as a rear channel in-wall integration. Offering cutting-edge acoustic technologies exclusive to Focal, such as the Beryllium tweeter and ‘W’ cone, this made in France loudspeaker offers sound reproduction that combines musicality and power. Thanks to its adjustable feature at the tweeter level, you can ensure your installation is optimised to your listening room. This 1000 Series range of loudspeakers embodies Focal excellence for the most sensational—and discreet—listening experience.

The CWM663 features a blue Aramid fiber bass/midrange driver housed in a die-cast chassis which provides the extra rigidity to provide a cleaner, faster bass. Its aluminium tweeter also incorporates a Nautilus™ tube to absorb unwanted sonic radiation. The CWM663 also utilises a three-position high frequency switch to fine tune the sound. The speaker is incredibly easy to install incorporating QuickDogs™ and plug-and-play functionality.

The Invisa MPX MultiPolar™ In-Wall/In-Ceiling Loudspeaker, with its dual 4.5" bass/midrange drivers, combines the advantages of a direct-radiating loudspeaker with enhanced spaciousness and dispersion. This makes them the perfect choice for the rear or side surround channels of a multi-channel installation, as well as for front main speakers or for distributed audio multi-room installations.It can be easily mounted in walls or ceilings and is very flexible in terms of orientation. Like the other Invisa Series speakers, it has a flat magnetically attached micro-perf grille that covers the flange for an attractive, nearly invisible look. It combines two precisely angled spiderleg cast-basket 4.5" bass/midrange drivers, a High-Velocity Folded Ribbon Tweeter (HVFR™) and a complex precision crossover network with a high-frequency equalization switch.Like the Invisa HTR 7000, it features GoldenEar’s unique Non-Periodic Diffraction Control and Wave-Launch technology for enhanced clarity and source-less sound radiation into the room.

The 100IWLCR5 loudspeakers which are dedicated to home audio can be highlighted for their acoustics performances and compact design. These products are aimed at small to medium sized rooms and for three types of use: distributed systems (hallways, living rooms…), stereo systems (bedrooms, kitchens…) and Home Cinema systems (in dedicated rooms or living rooms). This in-wall loudspeaker has a new aluminum inverted dome adjustable tweeter, more compact, improving the sound dispersion. It is also equipped with a new Polyglass cone (51/8” – 13 cm).  This LCR (Left, Centre, Right) loudspeaker can be used horizontally, as a center channel for a Home Cinema systems. It has a three position switch which allows choosing the left, center or right channels to adjust the levels according to the acoustic environment.This product can be installed everywhere thanks to a compact design with the speaker driver’s basket and chassis being redesigned as one only piece, frameless square and circular front grilles. Let yourself be surprised by the technology behind this product, an efficient design and ideal features for an easy use at this price.Specifications:Type D'appolito In-wall 2-wayDrivers 2x5" (13cm) Polyglass Midbass.1" (25mm) AI inverted dome TweeterSensitivity (2.83V/1m) 90,5dBFrequency response (+/-3dB) 55Hz-23kHzLow frequency point (-6dB) 43HzNominal impedance 8ΏMinimal impedance 3,8ΏRecommended amplifier power 25-120WExternal dimensions (Ø/Depth) 1721/64"x613/16"x325/64" (440x173x86mm)Cut-Out diameter 1611/32"x525/32 (415x147mm)Depth from wall 317/64" (83mm)Net weight (with front grille) 3.89lbs (2.90kg)Packing dimensions (WxDxH) 1911/64"x821/32"x411/16" (487x220x119mm)Total weight (with packaging) 7.6lbs (3.45kg)

The 300IWLCR6 built-in loudspeaker is made in France and dedicated to a home use. This LCR (Left, Center, Right) loudspeaker is perfect for a Home Cinema set-up with no compromises, in rooms of up to 320ft². These loudspeakers are equipped with Focal exclusive technologies such as the Flax woofer cone and an inverted tweeter dome to deliver a sound quality and precision perfect for your home. The bass are controlled and well defined. The Flax cones produce a natural and accurate sound with great intelligibility, ideal for movie dialogues. Watching a movie will become a completely new experience.On this in-wall speaker, the mid-treble plate can be rotated by 90° for use as a left, centre or right loudspeaker to aim at the listening spot. The tweeter and mid-levels can be adjusted to adapt to the room acoustics: this will result in the best performances regardless of the environment. They also provide a major advantage when it comes to installation, which has been greatly simplified with the EQI system (Easy Quick Install). They require no tools to install, for an unrivalled ease and speed of installation. These new products also meet the most essential criteria regarding use: frameless, magnetic grilles, anti-vibration feet…Key points• 3-way in-wall loudspeaker• Easy and quick to install without tools• LCR loudspeaker (left, centre and right) for uncompromising Home Cinema installations• Adjustable mid-treble plate• Speaker drivers designed and made in France by Focal• Deep frequency response in the low end and high power handling• Very balanced mid-range for improved intelligibility for Home Cinema set-ups• Supplied with a magnetic grille and ready to paint to ensure perfect integrationTechnical SpecificationsType 3-way In-wallDrivers 2 x 61/2" (16.5cm) woofers, 4" (10cm) Flax midrange,1" (25mm) Al/Mg inverted dome tweeterSensitivity (2.83V/1m) 92dBFrequency response (+/-3dB) 40Hz - 28kHzLow frequency point (-6dB) 33HzNominal impedance 8 ΩMinimal impedance 2.9 ΩRecommended amplifier power 50 - 150WExternal dimensions (HxWxD) 235/8" x 811/16" x 37/8" (600 x 220 x 98mm)Cut-Out diameter (HxL) 223/8" 71/2" (568 x 191mm)Depth from wall 311/16" (93mm)Net weight (with front grille) 12.4lbs (5.65kg)Packing dimensions (WxDxH) 271/16" x 121/8" x 71/4" (688 x 308 x 184mm)Total weight (with packaging) 17.4 lbs (7.9kg)

The 300IW6 built-in loudspeaker is made in France and dedicated to home use. This product is suitable for every room of the house and will provide you plenty of satisfaction, for systems in stereo and/or multichannel configurations.These loudspeakers are equipped with Focal exclusive technologies such as the Flax woofer cone and an inverted tweeter dome made of Aluminum/Magnesium to deliver a sound quality and precision perfect for your home. The bass are controlled and well defined. The Flax cones produce a natural and accurate sound with great intelligibility, ideal for movie dialogues. Another key factor: the patented EQI system (Easy Quick Install), where no tools are required.The orientation of the tweeter is fully orientable in order to ensure homogenous sound throughout the room regardless of the listening point. This product respects your interior decoration without altering ceilings and walls. The level of the tweeter can also be adjusted to adapt to the room acoustics: this will thus give you the performance as possible, no matter the type of environment.These new products also meet the most essential criteria regarding use: frameless, magnetic grilles, anti-vibration feets…