Passive Monitors

Acoustic Energy AE1 MkIII are reference monitor speakers that take the flat frequency response principles of the AE1 to an even higher level of transparent musical reproduction. The original AE1 was seen as a classic from both pro-audio and audiophile enthusiasts - its performance far exceeding expectations, for size and price. A Mark II version followed in the early 1990s and more recently three years of painstaking research and development has resulted in the AE1 MkIII.Incredibly, the MkIII improves on what is widely considered to be perfection, with even finer sensitivity, improved vocal articulation, better transparency and increased acoustic bandwidth. Add to this a brand new enclosure design, anti-vibration driver baffle platform and new high and low frequency drive units built to AE design, and the AE1 MkIII is set for world acclaim yet again.Available in Piano Black or Natural Cherry.

The MB2S XBD is a development of the successful MB2S with increased dynamics and LF performance. The addition of the XBD cabinet containing a second precision 12” Radial™ driver increases the LF headroom by 3dB below 380Hz that allows a larger room to be driven to greater effect. In a surround configuration the added headroom of the XBD allows the .1 surround effects channel to be handled with ease, avoiding the installation of further sub units. The MB2 XBD features in many quality conscious facilities including Studio Hilversum – The Netherlands. The 32 element, 4th order passive crossovers are housed in external enclosures which can be mounted to the rear of the XBD cabinets for improved fidelity. An ideal monitor for all music recording, mastering and post production in either stereo or surround configuration. Technology DEEPER, CLEARER, CLEANER BASS & MORE Greater detail & more natural A full, rich sound at any volume level Deeper bass from a smaller cabinet The source of PMC’s legendary natural, realistic sound is the Advanced Transmission Line (ATL) bass-loading technology, professionally proven all around the world. ATL uses energy generated by the bass unit in a much more intelligent, efficient way than speaker designs based on ported or sealed boxes. Specifications: Available Finishes: Neo Black Crossover Frequency: 380Hz & 3.8kHz Dimensions: H 1740mm 68.50" W 380mm 14.96" D 535mm 21.06" Drive Units: LF x 2 310mm PMC Radial™ driver / MF 75mm PMC fabric dome / HF 27mm PMC fabric soft dome Effective ATL™ Length: 2 x 3m 10ft Frequency Response: 20Hz - 25kHz Impedance: 4 Ohm nominal Input Connectors: 3 Pairs 4mm Sockets (Tri-wire or Tri-amp) sensitivity: 91dB 1W 1m Weight: 88kgs 193.6lbs Amplifier Power per Channel:HF 120W / MF 120W / LF 600W / LF 600W

The MB2S is perfect for mid sized control rooms either soffit mounted or on its custom studio stands. The MB2S allows higher SPL’s without distortion and loss of definition normally associated with a device of its size. The distinctive MB2S includes the PMC 75 mid driver that has taken the limits of soft dome design and construction to its ultimate conclusion. The Radial™ low frequency driver allows massive controlled excursions and avoids the effects of power compression, by cooling via its cast alloy exo-skeleton and new rear vented magnet. As with all PMC models there is matching low profile centre channels (MB2S-C) and subwoofers for use in surround configuration (XB2S). You can find the MB2S in the following studios Advantage Audio. Technology DEEPER, CLEARER, CLEANER BASS & MORE Greater detail & more natural A full, rich sound at any volume level Deeper bass from a smaller cabinet The source of PMC’s legendary natural, realistic sound is the Advanced Transmission Line (ATL) bass-loading technology, professionally proven all around the world. ATL uses energy generated by the bass unit in a much more intelligent, efficient way than speaker designs based on ported or sealed boxes. Specifications: Available Finishes: Neo Black Crossover Frequency: 380Hz & 3.8kHz Dimensions: H 870mm 34.25" W 380mm 14.96" D 535mm 21.06" Drive Units: LF 310mm PMC Radial™ driver / MF 75mm PMC fabric dome / HF 27mm fabric soft dome Effective ATL™ Length: 3m 10ft Frequency Response: 20Hz - 25kHz Impedance: 8 Ohm Nominal Input Connectors: 3 Pairs 4mm Sockets (Tri-wire or Tri-Amp) sensitivity: 91dB 1W 1m Weight: 49kg 108lbs

The IB2S is based on the hugely successful IB1S with one major change to the driver compliment. The addition of the PMC 75 large soft dome mid range unit increases the definition and clarity to the level of the larger monitors in the range with no increase in cabinet size. Since the launch of the IB2S it has featured worldwide with high profile clients such as Ronald Prent – Galaxy, Kraftwerk – Kling Klang, Teldex – Berlin, JVC – Japan and the list goes on. Its potent performance and unsurpassed definition across the audio spectrum make it the ideal reference monitor for any stereo or surround project. Technology DEEPER, CLEARER, CLEANER BASS & MORE Greater detail & more natural A full, rich sound at any volume level Deeper bass from a smaller cabinet The source of PMC’s legendary natural, realistic sound is the Advanced Transmission Line (ATL) bass-loading technology, professionally proven all around the world. ATL uses energy generated by the bass unit in a much more intelligent, efficient way than speaker designs based on ported or sealed boxes. Specifications: Available Finishes: Neo Black Crossover Frequency: 380Hz & 3.8kHz Dimensions: H 740mm 29.1" W 330mm 13.0" D 465mm 18.3" Drive Units:LF 250mm PMC Carbon Fibre/Nomex™ piston driver / MF 75mm PMC fabric dome / HF 27mm fabric soft dome Effective ATL™ Length: 2.4m 8ft Frequency Response: 25Hz-25kHz Impedance: 4 Ohm nominal Input Connectors: 3 Pairs 4mm Sockets (Tri-wire or Tri-Amp) sensitivity: 89dB 1W 1m Weight: 41kg 90.2lbs

The IB1S is an extremely flexible 3-way monitor, which has found its home in the most varied of environments. Commonly seen in Mastering, Broadcast and Postproduction in either stereo or surround when partnered with its dedicated centre channel and SB100 sub bass system. Its huge popularity in Hollywood film scoring and postproduction is assisted by the option of ‘Film filters’. This gives 2 positions of HF roll off: 1.5dB and 3dB per Oct and Flat position. The IB1S features wide dispersion soft domed fabric mid and high frequency units and the PMC 10" carbon fibre and Nomex™ flat piston low frequency driver. This flat patented driver increases dynamic handling and eliminates distortion that may occur due to cone break up. You can find the IB1S in the following studios: BBC Technologies Headquarters. Technology DEEPER, CLEARER, CLEANER BASS & MORE Greater detail & more natural A full, rich sound at any volume level Deeper bass from a smaller cabinet The source of PMC’s legendary natural, realistic sound is the Advanced Transmission Line (ATL) bass-loading technology, professionally proven all around the world. ATL uses energy generated by the bass unit in a much more intelligent, efficient way than speaker designs based on ported or sealed boxes. Specifications: Available Finishes: Neo Black Crossover Frequency: 380Hz & 3.8kHz Dimensions: H 740mm 29.1" W 330mm 13.0" D 465mm 18.3" Drive Units: LF 250mm PMC Carbon Fibre /Nomex™ piston driver / MF 75mm doped fabric / HF 27mm fabric soft dome Effective ATL™ Length: 2.4m 8ft Frequency Response: 25Hz-25kHz Impedance: 4 Ohm nominal Input Connectors: 3 Pairs 4mm Sockets (Tri-wire or Tri-Amp) sensitivity: 89dB 1W 1m Weight: 36kg 79.2lbs

A superb quality two-way passive magnetically shielded speaker with twin 7-inch glass fiber woofers and an 1-inch Neodymium Ring Radiator Tweeter . One of the best speakers in the world regardless of price, product of the year in the Stereophile magazine.         Features :  One 1" (25mm) Neodymium Ring Radiator tweeter  Two 7" (18cm) Glass Fiber Mid-Woofers in MTM configuration  Frequency response: 56Hz-20kHz ±1dB (31Hz-40kHz ±3dB)  SPL: 90 dB 1W/1m  Impedance: 4 Ohms  Dimensions: 23.6" H x 9.4" W x 12.4" D (60cm x 24cm x 32.5cm)  Weight: 41 lbs (18.5 kg) * Price for 1 speaker

One of the best speakers in the world. Based on the L707, Lipinski Sound proudly presents the new L707A SeriesOne 1" (25mm) custom Neodymium Ring Radiator tweeterEight 7” (l00mm} custom Glass Fiber Mid-Woofers in MTM configurationFrequency response: 37Hz-20kHz +/- 1 dB (20Hz-40kHz +/- 3 dB)Speaker-to-speaker consistency: +/- 1/4 dBIEC Power Handling: 600WSPL: 90.5 dB lW/lmImpedance: 8 OhmsDimensions; 79 7/16”H x 10”W * 21"D (2018mm x 256mm x 234mm) Height provided without pedestalWeight: 165.6 lbs (74,5 kg)

Based on the famous L707, Lipinski Sound proudly presents the new L707A SeriesOne 1” (25mm) custom Neodymium Ring Radiator tweeterFive 7" (180mm) custom Glass Fiber Mid-Woofers In MTM configurationFrequency response 43Hz-20kHz +/- 1 dB (24Hz-40kHz +/- 3 dB)Speaker-to-speaker consistency: +/- 1/4 dB - IEC Power Handling: 400W - SPL: 90.5 dB lW/lm Impedance 6 OhmsDimensions: 51 7/8”H x 10”W x 14 Ό” / 21”D (1317mm x256mrn x 362/534mm) - high provided without pedestalWeight: 106.7 lbs (48 kg)Price Per Unit

Based on the famous L707, Lipinski Sound proudly presents the new L707A SeriesOne 1" (25mm) custom Neodymium Ring Radiator tweeterTwo 7" (180mm) custom Glass Fiber Mid-Woofers In MTM configurationFrequency response 5OHz-20kHz +/-1dB (28Hz-40kHz +/-3dB)Speaker-to-speaker consistency; +/- 1/4 dBIEC Power Handling: 250WSPL:90.5dB lW/lmImpedance: 4 OhmsDimensions: 24 1/4"H x 10"W x 14 1/4"D (616mm x 256mm x 362mm)Weight: 47.8 lbs (21,5 kg)

A superb quality two-way passive magnetically shielded speaker with twin 7-inch glass fiber woofers and an 1-inch Neodymium Ring Radiator Tweeter . One of the best speakers in the world regardless of price, product of the year in the Stereophile magazine.         Features :  One 1" (25mm) Neodymium Ring Radiator tweeter  Two 7" (18cm) Glass Fiber Mid-Woofers in MTM configuration  Frequency response: 56Hz-20kHz ±1dB (31Hz-40kHz ±3dB)  SPL: 90 dB 1W/1m  Impedance: 4 Ohms  Dimensions: 23.6" H x 9.4" W x 12.4" D (60cm x 24cm x 32.5cm)  Weight: 41 lbs (18.5 kg) * Price for 1 speaker

A superb quality two-way passive magnetically shielded speaker with twin 5-inch glass fiber woofers and an 1-inch Neodymium Ring Radiator Tweeter. The little brother of the famous L-707 offer similar sound qualites with a very fast and neutral sound.        Features :   One 1" (25mm) Neodymium Ring Radiator tweeter  Two 5" (18cm) Glass Fiber Mid-Woofers in MTM configuration  Frequency response: 71Hz-20kHz ±1dB (46Hz-40kHz ±3dB)  SPL: 90 dB 1W/1mImpedance: 4 Ohms  Dimensions: 20" H x 8" W x 5.5" D (50cm x 20cm x 13.9cm)  Weight: 28 lbs (12.6 kg) * Price for one speaker